# create a Regular 1D algorithm for edges
algo1D = hexa.Segment()
+# optionally reverse node distribution on certain edges
+allEdges = geompy.SubShapeAllSortedIDs( box, geompy.ShapeType["EDGE"])
+reversedEdges = [ allEdges[0], allEdges[4] ]
+
# define "Arithmetic1D" hypothesis to cut all edges in several segments with increasing arithmetic length
-algo1D.Arithmetic1D(1, 4)
+algo1D.Arithmetic1D(1, 4, reversedEdges)
# create a quadrangle 2D algorithm for faces
hexa.Quadrangle()
tetraN.Compute()
\endcode
+<br>
+\anchor tui_projection
+<h3>Projection Algorithms</h3>
+
+\code
+# Project prisms from one meshed box to another mesh on the same box
+
+from smesh import *
+
+# Prepare geometry
+
+# Create a parallelepiped
+box = geompy.MakeBoxDXDYDZ(200, 100, 70)
+geompy.addToStudy( box, "box" )
+
+# Get geom faces to mesh with triangles in the 1ts and 2nd meshes
+faces = geompy.SubShapeAll(box, geompy.ShapeType["FACE"])
+# 2 adjacent faces of the box
+f1 = faces[2]
+f2 = faces[0]
+# face opposite to f2
+f2opp = faces[1]
+
+# Get vertices used to specify how to associate sides of faces at projection
+[v1F1, v2F1] = geompy.SubShapeAll(f1, geompy.ShapeType["VERTEX"])[:2]
+[v1F2, v2F2] = geompy.SubShapeAll(f2, geompy.ShapeType["VERTEX"])[:2]
+geompy.addToStudyInFather( box, v1F1, "v1F1" )
+geompy.addToStudyInFather( box, v2F1, "v2F1" )
+geompy.addToStudyInFather( box, v1F2, "v1F2" )
+geompy.addToStudyInFather( box, v2F2, "v2F2" )
+
+# Make group of 3 edges of f1 and f2
+edgesF1 = geompy.CreateGroup(f1, geompy.ShapeType["EDGE"])
+geompy.UnionList( edgesF1, geompy.SubShapeAll(f1, geompy.ShapeType["EDGE"])[:3])
+edgesF2 = geompy.CreateGroup(f2, geompy.ShapeType["EDGE"])
+geompy.UnionList( edgesF2, geompy.SubShapeAll(f2, geompy.ShapeType["EDGE"])[:3])
+geompy.addToStudyInFather( box, edgesF1, "edgesF1" )
+geompy.addToStudyInFather( box, edgesF2, "edgesF2" )
+
+
+# Make the source mesh with prisms
+src_mesh = Mesh(box, "Source mesh")
+src_mesh.Segment().NumberOfSegments(9,10)
+src_mesh.Quadrangle()
+src_mesh.Hexahedron()
+src_mesh.Triangle(f1) # triangular sumbesh
+src_mesh.Compute()
+
+
+# Mesh the box using projection algoritms
+
+# Define the same global 1D and 2D hypotheses
+tgt_mesh = Mesh(box, "Target mesh")
+tgt_mesh.Segment().NumberOfSegments(9,10,UseExisting=True)
+tgt_mesh.Quadrangle()
+
+# Define Projection 1D algorithm to project 1d mesh elements from group edgesF2 to edgesF1
+# It is actually not needed, just a demonstration
+proj1D = tgt_mesh.Projection1D( edgesF1 )
+# each vertex must be at the end of a connected group of edges (or a sole edge)
+proj1D.SourceEdge( edgesF2, src_mesh, v2F1, v2F2 )
+
+# Define 2D hypotheses to project triangles from f1 face of the source mesh to
+# f2 face in the target mesh. Vertices specify how to associate sides of faces
+proj2D = tgt_mesh.Projection2D( f2 )
+proj2D.SourceFace( f1, src_mesh, v1F1, v1F2, v2F1, v2F2 )
+
+# 2D hypotheses to project triangles from f2 of target mesh to the face opposite to f2.
+# Association of face sides is default
+proj2D = tgt_mesh.Projection2D( f2opp )
+proj2D.SourceFace( f2 )
+
+# 3D hypotheses to project prisms from the source to the target mesh
+proj3D = tgt_mesh.Projection3D()
+proj3D.SourceShape3D( box, src_mesh, v1F1, v1F2, v2F1, v2F2 )
+tgt_mesh.Compute()
+
+# Move the source mesh to visualy compare the two meshes
+src_mesh.TranslateObject( src_mesh, MakeDirStruct( 210, 0, 0 ), Copy=False)
+
+\endcode
+
+<br>
+
+\anchor tui_fixed_points
+
+<h2>1D Mesh with Fixed Points example</h2>
+
+\code
+import salome
+import geompy
+import smesh
+import StdMeshers
+
+# Create face and explode it on edges
+face = geompy.MakeFaceHW(100, 100, 1)
+edges = geompy.SubShapeAllSorted(face, geompy.ShapeType["EDGE"])
+geompy.addToStudy( face, "Face" )
+
+# get the first edge from exploded result
+edge1 = geompy.GetSubShapeID(face, edges[0])
+
+# Define Mesh on previously created face
+Mesh_1 = smesh.Mesh(face)
+
+# Create Fixed Point 1D hypothesis and define parameters.
+# Note: values greater than 1.0 and less than 0.0 are not taken into account;
+# duplicated values are removed. Also, if not specified explicitly, values 0.0 and 1.0
+# add added automatically.
+# The number of segments should correspond to the number of points (NbSeg = NbPnt-1);
+# extra values of segments splitting parameter are not taken into account,
+# while missing values are considered to be equal to 1.
+Fixed_points_1D_1 = smesh.CreateHypothesis('FixedPoints1D')
+Fixed_points_1D_1.SetPoints( [ 1.1, 0.9, 0.5, 0.0, 0.5, -0.3 ] )
+Fixed_points_1D_1.SetNbSegments( [ 3, 1, 2 ] )
+Fixed_points_1D_1.SetReversedEdges( [edge1] )
+
+# Add hypothesis to mesh and define 2D parameters
+Mesh_1.AddHypothesis(Fixed_points_1D_1)
+Regular_1D = Mesh_1.Segment()
+Quadrangle_2D = Mesh_1.Quadrangle()
+# Compute mesh
+Mesh_1.Compute()
+\endcode
+
+\anchor tui_radial_quadrangle
+<h2> Radial Quadrangle 1D2D example </h2>
+\code
+from smesh import *
+
+SetCurrentStudy(salome.myStudy)
+
+# Create face from the wire and add to study
+Face = geompy.MakeSketcher("Sketcher:F 0 0:TT 20 0:R 90:C 20 90:WF", [0, 0, 0, 1, 0, 0, 0, 0, 1])
+geompy.addToStudy(Face,"Face")
+edges = geompy.SubShapeAllSorted(Face, geompy.ShapeType["EDGE"])
+circle, radius1, radius2 = edges
+geompy.addToStudyInFather(Face, radius1,"radius1")
+geompy.addToStudyInFather(Face, radius2,"radius2")
+geompy.addToStudyInFather(Face, circle,"circle")
+
+
+# Define geometry for mesh, and Radial Quadrange algorithm
+mesh = smesh.Mesh(Face)
+radial_Quad_algo = mesh.Quadrangle(algo=RADIAL_QUAD)
+
+# The Radial Quadrange algorithm can work without any hypothesis
+# In this case it uses "Default Nb of Segments" preferences parameter to discretize edges
+mesh.Compute()
+
+# The Radial Quadrange uses global or local 1d hypotheses if it does
+# not have its own hypotheses.
+# Define global hypotheses to discretize radial edges and a local one for circular edge
+global_Nb_Segments = mesh.Segment().NumberOfSegments(5)
+local_Nb_Segments = mesh.Segment(circle).NumberOfSegments(10)
+mesh.Compute()
+
+# Define own parameters of Radial Quadrange algorithm
+radial_Quad_algo.NumberOfLayers( 4 )
+mesh.Compute()
+\endcode
+
+\anchor tui_quadrangle_parameters
+<h2>Quadrangle Parameters example </h2>
+\code
+import geompy
+import smesh
+import StdMeshers
+
+# Get 1/4 part from the disk face.
+Box_1 = geompy.MakeBoxDXDYDZ(100, 100, 100)
+Disk_1 = geompy.MakeDiskR(100, 1)
+Common_1 = geompy.MakeCommon(Disk_1, Box_1)
+geompy.addToStudy( Disk_1, "Disk_1" )
+geompy.addToStudy( Box_1, "Box_1" )
+geompy.addToStudy( Common_1, "Common_1" )
+
+# Set the Geometry for meshing
+Mesh_1 = smesh.Mesh(Common_1)
+
+# Create Quadrangle parameters and define the Base Vertex.
+Quadrangle_Parameters_1 = smesh.CreateHypothesis('QuadrangleParams')
+Quadrangle_Parameters_1.SetTriaVertex( 8 )
+
+# Define 1D hypothesis and cmpute the mesh
+Regular_1D = Mesh_1.Segment()
+Nb_Segments_1 = Regular_1D.NumberOfSegments(10)
+Nb_Segments_1.SetDistrType( 0 )
+status = Mesh_1.AddHypothesis(Quadrangle_Parameters_1)
+Quadrangle_2D = Mesh_1.Quadrangle()
+Mesh_1.Compute()
+\endcode
+
\n Other meshing algorithms:
<ul>
<li>\subpage tui_defining_blsurf_hypotheses_page</li>
+<li>\subpage tui_defining_ghs3d_hypotheses_page</li>
</ul>
-*/
\ No newline at end of file
+*/
