53539: 0D Element

[modules/smesh.git] / doc / salome / gui / SMESH / input / mesh_preferences.doc

diff --git a/doc/salome/gui/SMESH/input/mesh_preferences.doc b/doc/salome/gui/SMESH/input/mesh_preferences.doc
index 9a0d7994f114a2ed6dc0334a0fdc7ec14dd5fdda..79a268d0a0a00952b76dc38ed8e6f9adf1a27d90 100644 (file)
--- a/doc/salome/gui/SMESH/input/mesh_preferences.doc
+++ b/doc/salome/gui/SMESH/input/mesh_preferences.doc
@@ -10,15 +10,15 @@ or in later sessions with this module according to the preferences.
 \image html pref21.png
 
 - <b>Automatic Update</b>
 \image html pref21.png
 
 - <b>Automatic Update</b>

-  - If you toggle <b>Automatic Update</b> checkbox, the model in your
-    viewer will be automatically updated when you make changes in it, depending on
+  - <b>Automatic Update</b> - if activated, the mesh in your
+    viewer will be automatically updated after it's computation, depending on

     values of additional preferences specified below.
   - <b>Size limit (elements)</b> - allows specifying the maximum
     number of elements in the resulting mesh for which the automatic updating
     of the presentation is performed. This option affects only
     values of additional preferences specified below.
   - <b>Size limit (elements)</b> - allows specifying the maximum
     number of elements in the resulting mesh for which the automatic updating
     of the presentation is performed. This option affects only

-    <b>Compute</b> operation. Zero value means "no limit". Default value
-    is 500 000 mesh elements.
-  - <b>Incremental limit check</b> - when this control is switched on,
+    \ref compute_anchor "Compute" operation. Zero value means "no
+    limit". Default value is 500 000 mesh elements. 
+  - <b>Incremental limit check</b> - if activated,

     the mesh size limit check is not applied to the total number of
     elements in the resulting mesh, it is applied iteratively to each entity type
     in the following order: 0D elements, edges, faces, volumes, balls.
     the mesh size limit check is not applied to the total number of
     elements in the resulting mesh, it is applied iteratively to each entity type
     in the following order: 0D elements, edges, faces, volumes, balls.


@@ -28,32 +28,40 @@ or in later sessions with this module according to the preferences.
     this type are shown, otherwise the user is warned that some entities are not shown.
 
 - <b>Quality Controls</b>
     this type are shown, otherwise the user is warned that some entities are not shown.
 
 - <b>Quality Controls</b>

-  - If you toggle <b>Display entity</b>, both faces and edges of an
-    object will be displayed in the viewer by default.
-  - If you toggle <b>Use precision</b> checkbox, you can display numbers in
-    <b>Quality Control</b> diagrams at the necessary level of precision.
-  - <b>Number of digits after point</b> - defines precision for
-    <b>Quality Controls</b>. By default, numbers in <b>Quality Control</b>
-    diagrams are presented as integers.
-  - <b>Double nodes tolerance</b> defines the maximal distance between two
-    mesh nodes, at which they are considered coincident by <b>Double nodes</b>
-    quality control.
+  - <b>Display entity</b> - if activated, only currently
+    \ref quality_page "controlled" entities are displayed in the
+    viewer and other entities are temporarily hidden. For example if you
+    activate \ref length_page "Length" quality control, which controls
+    the length of mesh segments, then only mesh segments are
+    displayed and faces and volumes are hidden. 
+  - <b>Use precision</b> - if activated, all quality controls
+    will be computed at precision defined by <b>Number of digits after
+    point</b> - as integers by default.
+  - <b>Double nodes tolerance</b> - defines the maximal distance between two
+    mesh nodes, at which they are considered coincident by
+    \ref double_nodes_control_page "Double nodes" quality control.

 
 - <b>Display mode</b>
   - <b>Default display mode</b> - allows to set Wireframe, Shading, Nodes or Shrink
 
 - <b>Display mode</b>
   - <b>Default display mode</b> - allows to set Wireframe, Shading, Nodes or Shrink

-  presentation mode as default.
+    \ref display_mode_page "presentation mode" as default.

 
 

+\anchor quadratic_2d_mode_pref

 - <b>Representation of the 2D quadratic elements</b>
 - <b>Representation of the 2D quadratic elements</b>

-  - <b>Default mode of the 2D quadratic elements</b> combo-box - allows
-    to select lines or arcs for representation of quadratic elements as default.
+  - <b>Default mode of the 2D quadratic elements</b> - allows to
+    select either \a Lines or \a Arcs as a default
+    \ref quadratic_2d_mode "representation" of 1D and 2D
+    \ref adding_quadratic_elements_page "quadratic elements".

   - <b>Maximum Angle</b> - maximum deviation angle used by the
     application to build arcs.
 
 - <b>Mesh export</b>
   - <b>Maximum Angle</b> - maximum deviation angle used by the
     application to build arcs.
 
 - <b>Mesh export</b>

-  - If you toggle <b>Automatically create groups for MED export</b> check-box,
-    this operation will be carried out automatically.
-  - <b>Show warning when exporting group</b> check-box - allows defining the 
-    behavior of the warning when exporting a group.
+\anchor export_auto_groups_pref
+  - <b>Automatically create groups for MED export</b> - defines a
+    default state of a corresponding check-box in \ref export_auto_groups
+    "MED Export" dialog.
+\anchor group_export_warning_pref
+  - <b>Show warning when exporting group</b> - if activated, a warning is
+    displayed when exporting a group.

 
 - <b>Mesh computation</b>
   - <b>Show a computation result notification</b> combo-box allows to
 
 - <b>Mesh computation</b>
   - <b>Show a computation result notification</b> combo-box allows to