Fix regressions caused by improvements

[modules/smesh.git] / doc / salome / gui / SMESH / input / 1d_meshing_hypo.doc

diff --git a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
index 87c20b74f27e00237ddb6f5135ebd063e2aac01a..336ca5ddd8baad2cca71762f6ae7e765f432e016 100644 (file)
--- a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
+++ b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
@@ -5,31 +5,31 @@
 Basic 1D hypothesis specifies:
 <ul>
 <li>how \ref a1d_algos_anchor "Wire Discretization" should divide the edge;</li>
 Basic 1D hypothesis specifies:
 <ul>
 <li>how \ref a1d_algos_anchor "Wire Discretization" should divide the edge;</li>

-<li>how \ref a1d_algos_anchor "Composite Side Discretization" should divide the group of C1-continues edges.</li>
+<li>how \ref a1d_algos_anchor "Composite Side Discretization" should divide the group of C1-continuous edges.</li>

 </ul>
 
 </ul>
 

-By type of nodes distribution the 1D hypotheses can be categorized as follows:
+1D hypotheses can be categorized by type of nodes distribution as follows:

 <ul>
 <ul>

-<li>Uniform distribution
+<li>Uniform distribution:

   <ul>
     <li>\ref average_length_anchor "Local Length"</li>
     <li>\ref max_length_anchor "Max Size"</li>
     <li>\ref number_of_segments_anchor "Number of segments" with Equidistant distribution</li>
     <li>\ref automatic_length_anchor "Automatic Length"</li>
 </ul></li>
   <ul>
     <li>\ref average_length_anchor "Local Length"</li>
     <li>\ref max_length_anchor "Max Size"</li>
     <li>\ref number_of_segments_anchor "Number of segments" with Equidistant distribution</li>
     <li>\ref automatic_length_anchor "Automatic Length"</li>
 </ul></li>

-<li>Constantly increasing or decreasing length of segments
+<li>Constantly increasing or decreasing length of segments:

   <ul>
     <li>\ref arithmetic_1d_anchor "Arithmetic 1D"</li>
     <li>\ref geometric_1d_anchor "Geometric Progression"</li>
     <li>\ref start_and_end_length_anchor "Start and end length"</li>
     <li>\ref number_of_segments_anchor "Number of segments" with Scale distribution</li>
 </ul></li>
   <ul>
     <li>\ref arithmetic_1d_anchor "Arithmetic 1D"</li>
     <li>\ref geometric_1d_anchor "Geometric Progression"</li>
     <li>\ref start_and_end_length_anchor "Start and end length"</li>
     <li>\ref number_of_segments_anchor "Number of segments" with Scale distribution</li>
 </ul></li>

-<li>Distribution depending on curvature
+<li>Distribution depending on curvature:

   <ul>
     <li>\ref adaptive_1d_anchor "Adaptive"</li>
     <li>\ref deflection_1d_anchor "Deflection 1D"</li>
 </ul></li>
   <ul>
     <li>\ref adaptive_1d_anchor "Adaptive"</li>
     <li>\ref deflection_1d_anchor "Deflection 1D"</li>
 </ul></li>

-<li>Arbitrary distribution
+<li>Arbitrary distribution:

   <ul>
     <li>\ref fixed_points_1d_anchor "Fixed points 1D"</li>
     <li>\ref number_of_segments_anchor "Number of segments" with
   <ul>
     <li>\ref fixed_points_1d_anchor "Fixed points 1D"</li>
     <li>\ref number_of_segments_anchor "Number of segments" with


@@ -245,6 +245,7 @@ negative</b>.
 \ref tui_deflection_1d "Defining Number of Segments" hypothesis
 operation.
 
 \ref tui_deflection_1d "Defining Number of Segments" hypothesis
 operation.
 

+\note The plot functionality is available only if GUI module is builded with Plot 2D Viewer (set option SALOME_USE_PLOT2DVIEWER to ON when building GUI module).

 
 <br>
 \anchor start_and_end_length_anchor
 
 <br>
 \anchor start_and_end_length_anchor


@@ -316,7 +317,7 @@ possible to select the edges to be reversed either directly picking them in
 the 3D viewer or selecting the edges or groups of edges in the
 Object Browser.
 
 the 3D viewer or selecting the edges or groups of edges in the
 Object Browser.
 

-\ref reversed_edges_helper_anchor "Helper" group assists you in
+\ref reversed_edges_helper_anchor "Helper" group assists in

 defining <b>Reversed Edges</b> parameter.
 
 
 defining <b>Reversed Edges</b> parameter.
 
 


@@ -330,23 +331,23 @@ defining <b>Reversed Edges</b> parameter.
 
 \image html rev_edges_helper_dlg.png
 
 
 \image html rev_edges_helper_dlg.png
 

-\b Helper group assists you in defining <b>Reversed Edges</b>
+\b Helper group assists in defining <b>Reversed Edges</b>

 parameter of the hypotheses depending on edge direction.
 
 parameter of the hypotheses depending on edge direction.
 

-<b>Show whole geometry</b> check-box lets you see the whole
-geometrical model in the 3D Viewer. This can help you to understand
-location within the model of a set of edges shown in the Viewer.
+<b>Show whole geometry</b> check-box allows seeing the whole
+geometrical model in the 3D Viewer, which can help to understand the
+location of a set of edges within the model.

 
 

-<b>Propagation chains</b> group helps you to define 
-<b>Reversed Edges</b> so that opposite edges of quadrilateral faces
-will be split in the logically same direction. When this group is
+<b>Propagation chains</b> group allows defining <b>Reversed Edges</b>
+for splitting opposite edges of quadrilateral faces
+in a logically uniform direction. When this group is

 activated, the list is filled with propagation chains found within the
 activated, the list is filled with propagation chains found within the

-model. When you select a chain in the list, edges of the chain are
-shown in the Viewer with arrows so that you can chose a common
-direction for all chain edges. \b Reverse button inverses the common
-direction of chain edges. If \b Add button is active, this means that some
-edges of a chain have different direction and you can click \b Add
-button to add such edges to <b>Reversed Edges</b> list.
+model. When a chain is selected in the list its edges are
+shown in the Viewer with arrows, which enables choosing a common
+direction for all chain edges. \b Reverse button inverts the common
+direction of chain edges. If \b Add button is active, some
+edges of a chain have a different direction, so you can click \b Add
+button to add them to <b>Reversed Edges</b> list.

 
 \image html propagation_chain.png "The whole geometry and a propagation chain"
 
 
 \image html propagation_chain.png "The whole geometry and a propagation chain"