#17237: Body fitting on sub-mesh, #16523: Treatment of internal faces

[modules/smesh.git] / doc / salome / examples / cartesian_algo.py

diff --git a/doc/salome/examples/cartesian_algo.py b/doc/salome/examples/cartesian_algo.py
index e5651cb670a2a96a2e9c8492e8220d647ddd0582..d7d64b8b7617bfbb8e813f812b52ea0509b3cb1e 100644 (file)
--- a/doc/salome/examples/cartesian_algo.py
+++ b/doc/salome/examples/cartesian_algo.py
@@ -5,51 +5,73 @@ import salome
 salome.salome_init()
 import GEOM
 from salome.geom import geomBuilder
-geompy = geomBuilder.New(salome.myStudy)
+geompy = geomBuilder.New()
 
 import SMESH, SALOMEDS
 from salome.smesh import smeshBuilder
-smesh =  smeshBuilder.New(salome.myStudy)
-import salome_notebook
+smesh =  smeshBuilder.New()
 
 
 # create a sphere
 sphere = geompy.MakeSphereR( 50 )
-geompy.addToStudy( sphere, "sphere" )
+
+# cut the sphere by a box
+box = geompy.MakeBoxDXDYDZ( 100, 100, 100 )
+partition = geompy.MakePartition([ sphere ], [ box ], theName="partition")
 
 # create a mesh and assign a "Body Fitting" algo
-mesh = smesh.Mesh( sphere )
+mesh = smesh.Mesh( partition )
 cartAlgo = mesh.BodyFitted()
 
 # define a cartesian grid using Coordinates
-coords = range(-100,100,10)
+coords = list(range(-100,100,10))
 cartHyp = cartAlgo.SetGrid( coords,coords,coords, 1000000)
 
 # compute the mesh
 mesh.Compute()
-print "nb hexahedra",mesh.NbHexas()
-print "nb tetrahedra",mesh.NbTetras()
-print "nb polyhedra",mesh.NbPolyhedrons()
-print
+print("nb hexahedra",mesh.NbHexas())
+print("nb tetrahedra",mesh.NbTetras())
+print("nb polyhedra",mesh.NbPolyhedrons())
+print()
 
 # define the grid by setting constant spacing
 cartHyp = cartAlgo.SetGrid( "10","10","10", 1000000)
 
 mesh.Compute()
-print "nb hexahedra",mesh.NbHexas()
-print "nb tetrahedra",mesh.NbTetras()
-print "nb polyhedra",mesh.NbPolyhedrons()
+print("nb hexahedra",mesh.NbHexas())
+print("nb tetrahedra",mesh.NbTetras())
+print("nb polyhedra",mesh.NbPolyhedrons())
+print("nb faces",mesh.NbFaces())
+print()
+
+# activate creation of faces
+cartHyp.SetToCreateFaces( True )
 
+mesh.Compute()
+print("nb hexahedra",mesh.NbHexas())
+print("nb tetrahedra",mesh.NbTetras())
+print("nb polyhedra",mesh.NbPolyhedrons())
+print("nb faces",mesh.NbFaces())
+print()
+
+# enable consideration of shared faces
+cartHyp.SetToConsiderInternalFaces( True )
+mesh.Compute()
+print("nb hexahedra",mesh.NbHexas())
+print("nb tetrahedra",mesh.NbTetras())
+print("nb polyhedra",mesh.NbPolyhedrons())
+print("nb faces",mesh.NbFaces())
+print()
 
 # define the grid by setting different spacing in 2 sub-ranges of geometry
 spaceFuns = ["5","10+10*t"]
 cartAlgo.SetGrid( [spaceFuns, [0.5]], [spaceFuns, [0.5]], [spaceFuns, [0.25]], 10 )
 
 mesh.Compute()
-print "nb hexahedra",mesh.NbHexas()
-print "nb tetrahedra",mesh.NbTetras()
-print "nb polyhedra",mesh.NbPolyhedrons()
-print
+print("nb hexahedra",mesh.NbHexas())
+print("nb tetrahedra",mesh.NbTetras())
+print("nb polyhedra",mesh.NbPolyhedrons())
+print()
 
 # Example of customization of dirtections of the grid axes
 
@@ -67,23 +89,23 @@ mesh = smesh.Mesh( box, "custom axes")
 algo = mesh.BodyFitted()
 algo.SetGrid( spc, spc, spc, 10000 )
 mesh.Compute()
-print "Default axes"
-print "   nb hex:",mesh.NbHexas()
+print("Default axes")
+print("   nb hex:",mesh.NbHexas())
 
 # set axes using edges of the box
 algo.SetAxesDirs( xDir, [-0.1,1,0], zDir )
 mesh.Compute()
-print "Manual axes"
-print "   nb hex:",mesh.NbHexas()
+print("Manual axes")
+print("   nb hex:",mesh.NbHexas())
 
 # set optimal orthogonal axes
 algo.SetOptimalAxesDirs( isOrthogonal=True )
 mesh.Compute()
-print "Optimal orthogonal axes"
-print "   nb hex:",mesh.NbHexas()
+print("Optimal orthogonal axes")
+print("   nb hex:",mesh.NbHexas())
 
 # set optimal non-orthogonal axes
 algo.SetOptimalAxesDirs( isOrthogonal=False )
 mesh.Compute()
-print "Optimal non-orthogonal axes"
-print "   nb hex:",mesh.NbHexas()
+print("Optimal non-orthogonal axes")
+print("   nb hex:",mesh.NbHexas())