+++ /dev/null
-# Copyright (C) 2014-2023 CEA, EDF
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-"""
- TestRectangle.py
- Unit test of SketchPlugin_Rectangle class
-
-"""
-from GeomDataAPI import *
-from ModelAPI import *
-import math
-from salome.shaper import model
-
-#=========================================================================
-# Initialization of the test
-#=========================================================================
-
-__updated__ = "2016-02-05"
-
-
-#=========================================================================
-# Auxiliary functions
-#=========================================================================
-def isHorizontal(line):
- aStart = geomDataAPI_Point2D(line.attribute("StartPoint"))
- aEnd = geomDataAPI_Point2D(line.attribute("EndPoint"))
- return aStart.y() == aEnd.y()
-
-def isVertical(line):
- aStart = geomDataAPI_Point2D(line.attribute("StartPoint"))
- aEnd = geomDataAPI_Point2D(line.attribute("EndPoint"))
- return aStart.x() == aEnd.x()
-
-
-#=========================================================================
-# Start of test
-#=========================================================================
-aSession = ModelAPI_Session.get()
-aDocument = aSession.moduleDocument()
-#=========================================================================
-# Creation of a sketch
-#=========================================================================
-aSession.startOperation()
-aSketchFeature = featureToCompositeFeature(aDocument.addFeature("Sketch"))
-origin = geomDataAPI_Point(aSketchFeature.attribute("Origin"))
-origin.setValue(0, 0, 0)
-dirx = geomDataAPI_Dir(aSketchFeature.attribute("DirX"))
-dirx.setValue(1, 0, 0)
-norm = geomDataAPI_Dir(aSketchFeature.attribute("Norm"))
-norm.setValue(0, 0, 1)
-aSession.finishOperation()
-#=========================================================================
-# Create a rectangle
-#=========================================================================
-aSession.startOperation()
-aRectangle = aSketchFeature.addFeature("SketchRectangle")
-aRectangle.string("RectangleType").setValue("RectangleTypeByCorners")
-aStartCorner = geomDataAPI_Point2D(aRectangle.attribute("RectStartPoint"))
-aEndCorner = geomDataAPI_Point2D(aRectangle.attribute("RectEndPoint"))
-aStartCorner.setValue(10., 10.)
-aEndCorner.setValue(40., 30.)
-aSession.finishOperation()
-#=========================================================================
-# Check the lines of rectangle are parallel to the axes
-#=========================================================================
-aNbSubs = aSketchFeature.numberOfSubs()
-aNbLines = 0
-for i in range (0, aNbSubs):
- aFeature = objectToFeature(aSketchFeature.subFeature(i))
- if aFeature.getKind() == "SketchLine":
- aLastLine = aFeature
- assert (isHorizontal(aLastLine) or isVertical(aLastLine))
- aNbLines = aNbLines + 1
-assert (aNbLines == 4)
-assert (model.dof(aSketchFeature) == 5)
-#=========================================================================
-# Move one of lines
-#=========================================================================
-aSession.startOperation()
-aLineEnd = geomDataAPI_Point2D(aLastLine.attribute("EndPoint"))
-aLineEnd.setValue(41., 30.)
-aSession.finishOperation()
-#=========================================================================
-# Check the lines of rectangle are parallel to the axes
-#=========================================================================
-aNbSubs = aSketchFeature.numberOfSubs()
-aNbLines = 0
-tolerance = 1.e-5
-valref = [28.47721, 1.3352780]
-for i in range (0, aNbSubs):
- aFeature = objectToFeature(aSketchFeature.subFeature(i))
- if aFeature.getKind() == "SketchLine":
- aLastLine = aFeature
- #print (aLastLine.lastResult().shape().edge().length())
- #print (valref[i%2])
- #print (abs(aLastLine.lastResult().shape().edge().length()-valref[i%2]))
- assert(abs(aLastLine.lastResult().shape().edge().length()-valref[i%2]) <= tolerance)
- aNbLines = aNbLines + 1
-assert (aNbLines == 4)
-assert (model.dof(aSketchFeature) == 5)
-#=========================================================================
-# End of test
-#=========================================================================
-
-assert(model.checkPythonDump())
--- /dev/null
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+"""
+ TestRectangle1.py
+ Unit test of SketchPlugin_Rectangle class
+
+"""
+from GeomDataAPI import *
+from ModelAPI import *
+from GeomAPI import *
+import math
+from salome.shaper import model
+
+#=========================================================================
+# Initialization of the test
+#=========================================================================
+
+__updated__ = "2016-02-05"
+
+
+#=========================================================================
+# Auxiliary functions
+#=========================================================================
+def isHorizontal(line):
+ aStart = geomDataAPI_Point2D(line.attribute("StartPoint"))
+ aEnd = geomDataAPI_Point2D(line.attribute("EndPoint"))
+ return aStart.y() == aEnd.y()
+
+def isVertical(line):
+ aStart = geomDataAPI_Point2D(line.attribute("StartPoint"))
+ aEnd = geomDataAPI_Point2D(line.attribute("EndPoint"))
+ return aStart.x() == aEnd.x()
+
+def isPerpendicular(line1, line2, tolerance):
+ aStart1 = geomDataAPI_Point2D(line1.attribute("StartPoint"))
+ aEnd1 = geomDataAPI_Point2D(line1.attribute("EndPoint"))
+ aStart2 = geomDataAPI_Point2D(line2.attribute("StartPoint"))
+ aEnd2 = geomDataAPI_Point2D(line2.attribute("EndPoint"))
+ anAngle = abs(GeomAPI_Angle2d(aStart1.pnt(), aEnd1.pnt(), aStart2.pnt(), aEnd2.pnt()).angleDegree())
+ #print("Angle = ", anAngle)
+ return abs(anAngle-90) < tolerance # or abs(anAngle-270) < tolerance
+
+#=========================================================================
+# Start of test
+#=========================================================================
+aSession = ModelAPI_Session.get()
+aDocument = aSession.moduleDocument()
+#=========================================================================
+# Creation of a sketch
+#=========================================================================
+aSession.startOperation()
+aSketchFeature = featureToCompositeFeature(aDocument.addFeature("Sketch"))
+origin = geomDataAPI_Point(aSketchFeature.attribute("Origin"))
+origin.setValue(0, 0, 0)
+dirx = geomDataAPI_Dir(aSketchFeature.attribute("DirX"))
+dirx.setValue(1, 0, 0)
+norm = geomDataAPI_Dir(aSketchFeature.attribute("Norm"))
+norm.setValue(0, 0, 1)
+aSession.finishOperation()
+#=========================================================================
+# Create a rectangle
+#=========================================================================
+aSession.startOperation()
+aRectangle = aSketchFeature.addFeature("SketchRectangle")
+aRectangle.string("RectangleType").setValue("RectangleTypeByCorners")
+aStartCorner = geomDataAPI_Point2D(aRectangle.attribute("RectStartPoint"))
+aEndCorner = geomDataAPI_Point2D(aRectangle.attribute("RectEndPoint"))
+aStartCorner.setValue(10., 10.)
+aEndCorner.setValue(40., 30.)
+aSession.finishOperation()
+#=========================================================================
+# Check the lines of rectangle are parallel to the axes
+#=========================================================================
+aNbSubs = aSketchFeature.numberOfSubs()
+aNbLines = 0
+for i in range (0, aNbSubs):
+ aFeature = objectToFeature(aSketchFeature.subFeature(i))
+ if aFeature.getKind() == "SketchLine":
+ aLastLine = aFeature
+ assert (isHorizontal(aLastLine) or isVertical(aLastLine))
+ aNbLines = aNbLines + 1
+assert (aNbLines == 4)
+assert (model.dof(aSketchFeature) == 5)
+#=========================================================================
+# Move one of lines
+#=========================================================================
+aSession.startOperation()
+aLineEnd = geomDataAPI_Point2D(aLastLine.attribute("EndPoint"))
+aLineEnd.setValue(41., 30.)
+aSession.finishOperation()
+#=========================================================================
+# Check that we have still two pairs of lines with same length
+# and that connected lines are perpendicular
+#=========================================================================
+aNbSubs = aSketchFeature.numberOfSubs()
+aNbLines = 0
+tolerance = 1.e-5
+valref = [0, 0]
+aPrevLine = None
+for i in range (0, aNbSubs):
+ aFeature = objectToFeature(aSketchFeature.subFeature(i))
+ if aFeature.getKind() == "SketchLine":
+ aLastLine = aFeature
+ # Opposite lines must have same length
+ edgeLen = aLastLine.lastResult().shape().edge().length()
+ if (valref[i%2] == 0):
+ valref[i%2] = edgeLen
+ else:
+ assert(abs(edgeLen-valref[i%2]) <= tolerance)
+ # Connected lines must be perpendicular
+ if aPrevLine != None:
+ assert(isPerpendicular(aPrevLine, aLastLine, tolerance))
+ aPrevLine = aLastLine
+ aNbLines = aNbLines + 1
+assert (aNbLines == 4)
+assert (model.dof(aSketchFeature) == 5)
+#=========================================================================
+# End of test
+#=========================================================================
+
+assert(model.checkPythonDump())
