--- /dev/null
+# -*- coding: utf-8 -*-
+
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "languette", "20")
+model.addParameter(Part_1_doc, "d1", "70")
+model.addParameter(Part_1_doc, "d2", "77.5")
+model.addParameter(Part_1_doc, "d3", "32.5")
+model.addParameter(Part_1_doc, "h1", "10")
+model.addParameter(Part_1_doc, "r_trou", "3.125")
+model.addParameter(Part_1_doc, "r1", "7.5")
+model.addParameter(Part_1_doc, "r_trou2", "5")
+model.addParameter(Part_1_doc, "d4", "110")
+model.addParameter(Part_1_doc, "d5", "21.25")
+model.addParameter(Part_1_doc, "d6", "31.25")
+model.addParameter(Part_1_doc, "angle", "30")
+model.addParameter(Part_1_doc, "h2", "15")
+model.addParameter(Part_1_doc, "h3", "7.5")
+model.addParameter(Part_1_doc, "r2", "3.75")
+model.addParameter(Part_1_doc, "r3", "1.25")
+model.addParameter(Part_1_doc, "epaisseur", "2.5")
+model.addParameter(Part_1_doc, "e1", "6.2")
+model.addParameter(Part_1_doc, "e2", "15")
+model.addParameter(Part_1_doc, "d7", "11.2")
+model.addParameter(Part_1_doc, "h4", "40")
+model.addParameter(Part_1_doc, "d_diff", "5")
+model.addParameter(Part_1_doc, "e3", "35")
+model.addParameter(Part_1_doc, "d8", "23.75")
+model.addParameter(Part_1_doc, "d9", "6.25")
+model.addParameter(Part_1_doc, "d_trou", "17.5")
+model.addParameter(Part_1_doc, "coeff", "1")
+model.addParameter(Part_1_doc, "epaisseur_plat", "25")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(0, 0, 13.23223304703355, -2.874692731756102e-26)
+SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchArc_1 = Sketch_1.addArc(13.23223304703355, 5.51776695296637, 13.23223304703355, -2.874692731756102e-26, 18.74999999999991, 5.51776695296637, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_1.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_1.results()[1])
+SketchLine_3 = Sketch_1.addLine(18.74999999999991, 5.51776695296637, 18.74999999999991, 29.48223304703358)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_2 = Sketch_1.addArc(21.76776695296633, 29.48223304703358, 18.74999999999991, 29.48223304703358, 21.76776695296638, 32.50000000000001, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_2.results()[1])
+SketchLine_4 = Sketch_1.addLine(21.76776695296638, 32.50000000000001, 88.23223304703366, 32.50000000000001)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
+SketchArc_3 = Sketch_1.addArc(88.23223304703366, 29.48223304703358, 88.23223304703366, 32.50000000000001, 91.25000000000009, 29.48223304703358, True)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchArc_3.startPoint())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchLine_4.result(), SketchArc_3.results()[1])
+SketchLine_5 = Sketch_1.addLine(91.25000000000009, 29.48223304703358, 91.25000000000009, 5.51776695296637)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_5.startPoint())
+SketchArc_4 = Sketch_1.addArc(96.76776695296645, 5.51776695296637, 91.25000000000009, 5.51776695296637, 96.76776695296645, 0, False)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_4.startPoint())
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_5.result(), SketchArc_4.results()[1])
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_4.endPoint())
+SketchLine_6 = Sketch_1.addLine(96.76776695296645, 0, 110, 0)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_2.result())
+SketchLine_7 = Sketch_1.addLine(0, 0, 0, 2.5)
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(0, 2.5, 14.99999999999991, 2.5)
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchArc_5 = Sketch_1.addArc(14.99999999999991, 3.75, 14.99999999999991, 2.5, 16.24999999999991, 3.75, False)
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchArc_5.startPoint())
+SketchConstraintTangent_5 = Sketch_1.setTangent(SketchLine_8.result(), SketchArc_5.results()[1])
+SketchLine_9 = Sketch_1.addLine(16.24999999999991, 3.75, 16.24999999999991, 31.24999999999991)
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_9.startPoint())
+SketchArc_6 = Sketch_1.addArc(19.99999999999991, 31.24999999999991, 16.24999999999991, 31.24999999999991, 19.99999999999996, 35, True)
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_6.startPoint())
+SketchConstraintTangent_6 = Sketch_1.setTangent(SketchLine_9.result(), SketchArc_6.results()[1])
+SketchLine_10 = Sketch_1.addLine(19.99999999999996, 35, 89.99999999999997, 35)
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_10.startPoint())
+SketchArc_7 = Sketch_1.addArc(90.00000000000009, 31.24999999999977, 89.99999999999997, 35, 93.75000000000009, 31.24999999999977, True)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_7.startPoint())
+SketchConstraintTangent_7 = Sketch_1.setTangent(SketchLine_10.result(), SketchArc_7.results()[1])
+SketchLine_11 = Sketch_1.addLine(93.75000000000009, 31.24999999999977, 93.75000000000009, 3.75)
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchLine_11.startPoint())
+SketchArc_8 = Sketch_1.addArc(95.00000000000009, 3.75, 93.75000000000009, 3.75, 95.00000000000009, 2.5, False)
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchArc_8.startPoint())
+SketchConstraintTangent_8 = Sketch_1.setTangent(SketchLine_11.result(), SketchArc_8.results()[1])
+SketchLine_12 = Sketch_1.addLine(95.00000000000009, 2.5, 110, 2.5)
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_1.addLine(110, 2.5, 110, 0)
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_13.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_11.result())
+SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_13.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_12.result())
+SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_6.results()[1], SketchLine_10.result())
+SketchConstraintTangent_10 = Sketch_1.setTangent(SketchArc_7.results()[1], SketchLine_11.result())
+SketchConstraintTangent_11 = Sketch_1.setTangent(SketchArc_8.results()[1], SketchLine_12.result())
+SketchConstraintTangent_12 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_9.result())
+SketchConstraintTangent_13 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintTangent_14 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_6.result())
+SketchConstraintTangent_15 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_4.result())
+SketchConstraintTangent_16 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_5.result())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_5.results()[1], SketchArc_8.results()[1])
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_8.result(), SketchLine_12.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_6.result())
+SketchConstraintEqual_4 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_4.results()[1])
+SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_5.result())
+SketchConstraintEqual_6 = Sketch_1.setEqual(SketchLine_9.result(), SketchLine_11.result())
+SketchConstraintEqual_7 = Sketch_1.setEqual(SketchArc_6.results()[1], SketchArc_7.results()[1])
+SketchConstraintEqual_8 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_13.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "epaisseur*coeff")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_5.endPoint(), SketchLine_3.result(), "epaisseur*coeff")
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_6.endPoint(), SketchLine_4.result(), "epaisseur*coeff")
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_5.results()[1], "r3*coeff")
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_6.results()[1], "r2*coeff")
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_12.endPoint(), SketchLine_7.result(), "d4*coeff")
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchArc_5.center(), SketchArc_1.center(), "epaisseur*coeff")
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchArc_2.center(), SketchArc_6.center(), "epaisseur*coeff")
+SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_1.result(), SketchArc_6.endPoint(), "(h4-d_diff)*coeff")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_10.result(), "d1*coeff")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_7r-SketchLine_8r-SketchArc_5_2r-SketchLine_9r-SketchArc_6_2f-SketchLine_10r-SketchArc_7_2f-SketchLine_11r-SketchArc_8_2r-SketchLine_12r-SketchLine_13r")], model.selection(), "epaisseur_plat*coeff", 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d2*coeff", True)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/Generated_Face_13"))
+SketchLine_14 = SketchProjection_1.createdFeature()
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/To_Face_1"))
+SketchLine_15 = SketchProjection_2.createdFeature()
+SketchLine_16 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -31.24999999999999, -35.00000000000001)
+SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_16.startPoint())
+SketchArc_9 = Sketch_2.addArc(-31.24999999999999, -31.25000000000001, -31.24999999999999, -35.00000000000001, -34.99999999999999, -31.25000000000001, True)
+SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchArc_9.startPoint())
+SketchConstraintTangent_17 = Sketch_2.setTangent(SketchLine_16.result(), SketchArc_9.results()[1])
+SketchLine_17 = Sketch_2.addLine(-35, -31.24999999999999, -35, 1.250000000000009)
+SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_17.startPoint())
+SketchArc_10 = Sketch_2.addArc(-31.25, 1.249999999999998, -35, 1.249999999999998, -31.25, 4.999999999999998, True)
+SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchArc_10.startPoint())
+SketchConstraintTangent_18 = Sketch_2.setTangent(SketchLine_17.result(), SketchArc_10.results()[1])
+SketchLine_18 = Sketch_2.addLine(-31.25, 4.999999999999999, -11.25, 4.999999999999999)
+SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchArc_10.endPoint(), SketchLine_18.startPoint())
+SketchLine_19 = Sketch_2.addLine(-11.25, 5.000000000000009, -11.25, 2.500000000000009)
+SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchLine_20 = Sketch_2.addLine(-11.25, 2.500000000000002, -31.24999999999999, 2.500000000000017)
+SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchArc_11 = Sketch_2.addArc(-31.25, 1.25, -31.25, 2.500000000000002, -32.5, 1.250000000000808, False)
+SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchArc_11.startPoint())
+SketchConstraintTangent_19 = Sketch_2.setTangent(SketchLine_20.result(), SketchArc_11.results()[1])
+SketchLine_21 = Sketch_2.addLine(-32.5, 1.249999999999992, -32.5, -31.24999999999999)
+SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchArc_11.endPoint(), SketchLine_21.startPoint())
+SketchArc_12 = Sketch_2.addArc(-31.25, -31.25, -32.5, -31.25, -31.25, -32.5, False)
+SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchArc_12.startPoint())
+SketchConstraintTangent_20 = Sketch_2.setTangent(SketchLine_21.result(), SketchArc_12.results()[1])
+SketchLine_22 = Sketch_2.addLine(-31.25, -32.50000000000001, -25.00000000000001, -32.50000000000001)
+SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchArc_12.endPoint(), SketchLine_22.startPoint())
+#SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_15).startPoint(), SketchLine_22.endPoint())
+SketchLine_23 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -24.99999999999999, -32.50000000000002)
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_23.startPoint())
+#SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_15).startPoint(), SketchLine_23.endPoint())
+SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.endPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_16.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_22.result())
+SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_20.result())
+SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_18.result())
+SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_17.result())
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_21.result())
+SketchConstraintVertical_9 = Sketch_2.setVertical(SketchLine_23.result())
+SketchConstraintVertical_10 = Sketch_2.setVertical(SketchLine_19.result())
+SketchConstraintTangent_21 = Sketch_2.setTangent(SketchArc_9.results()[1], SketchLine_17.result())
+SketchConstraintTangent_22 = Sketch_2.setTangent(SketchArc_10.results()[1], SketchLine_18.result())
+SketchConstraintTangent_23 = Sketch_2.setTangent(SketchArc_11.results()[1], SketchLine_21.result())
+SketchConstraintTangent_24 = Sketch_2.setTangent(SketchArc_12.results()[1], SketchLine_22.result())
+SketchConstraintDistance_7 = Sketch_2.setDistance(SketchLine_23.startPoint(), SketchLine_18.result(), "h4*coeff")
+SketchConstraintDistance_8 = Sketch_2.setDistance(SketchLine_16.startPoint(), SketchLine_22.result(), "epaisseur*coeff")
+SketchConstraintDistance_9 = Sketch_2.setDistance(SketchLine_21.endPoint(), SketchLine_17.result(), "epaisseur*coeff")
+SketchConstraintDistance_10 = Sketch_2.setDistance(SketchArc_11.startPoint(), SketchLine_18.result(), "epaisseur*coeff")
+SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchAPI_Line(SketchLine_14).endPoint())
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+#SketchConstraintDistance_11 = Sketch_2.setDistance(SketchLine_16.result(), SketchPoint_2.coordinates(), "(h4-d_diff)*coeff")
+SketchConstraintDistance_12 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_17.result(), "e3*coeff")
+#SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_15.result())
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], "r2*coeff")
+SketchConstraintEqual_9 = Sketch_2.setEqual(SketchArc_9.results()[1], SketchArc_10.results()[1])
+SketchConstraintEqual_10 = Sketch_2.setEqual(SketchArc_11.results()[1], SketchArc_12.results()[1])
+SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_12.results()[1], "r3*coeff")
+SketchConstraintDistance_13 = Sketch_2.setDistance(SketchArc_10.startPoint(), SketchLine_19.result(), "d8*coeff")
+#SketchConstraintDistance_14 = Sketch_2.setDistance(SketchLine_17.startPoint(), SketchLine_23.result(), "(e3-epaisseur_plat)*coeff")
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_16r-SketchArc_9_2f-SketchLine_17r-SketchArc_10_2f-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchArc_11_2r-SketchLine_21r-SketchArc_12_2r-SketchLine_22r-SketchLine_23f")], model.selection(), "d6*coeff", 0)
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_9"))
+SketchLine_24 = Sketch_3.addLine(46.25, 22.91561885925604, 51.3, 20.00000000000001)
+SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_9&Extrusion_2_1/To_Face_1"))
+#SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_25.result())
+SketchLine_26 = Sketch_3.addLine(51.3, 20.00000000000001, 62.50000000000001, 20.00000000000001)
+SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint())
+SketchLine_27 = Sketch_3.addLine(62.50000000000001, 20.00000000000001, 62.5, -4.999999999999999)
+SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
+SketchLine_28 = Sketch_3.addLine(62.5, -4.999999999999999, 46.25, -4.999999999999999)
+SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
+SketchLine_29 = Sketch_3.addLine(46.25, -4.999999999999999, 46.25, 22.91561885925604)
+SketchConstraintCoincidence_45 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
+SketchLine_30 = Sketch_3.addLine(46.25, 35.00000000000001, 56.25000000000002, 35.00000000000001)
+SketchLine_31 = Sketch_3.addLine(56.25000000000002, 35.00000000000001, 56.25000000000002, 27.50000000000001)
+SketchConstraintCoincidence_46 = Sketch_3.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchLine_32 = Sketch_3.addLine(56.25000000000002, 27.50000000000001, 46.25, 27.50000000000001)
+SketchConstraintCoincidence_47 = Sketch_3.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
+SketchConstraintCoincidence_48 = Sketch_3.setCoincident(SketchLine_32.endPoint(), SketchLine_25.result())
+SketchLine_33 = Sketch_3.addLine(46.25, 27.50000000000001, 46.25, 35.00000000000001)
+SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchLine_30.startPoint(), SketchLine_33.endPoint())
+SketchConstraintHorizontal_9 = Sketch_3.setHorizontal(SketchLine_28.result())
+SketchConstraintHorizontal_10 = Sketch_3.setHorizontal(SketchLine_26.result())
+SketchConstraintHorizontal_11 = Sketch_3.setHorizontal(SketchLine_32.result())
+SketchConstraintHorizontal_12 = Sketch_3.setHorizontal(SketchLine_30.result())
+SketchConstraintVertical_11 = Sketch_3.setVertical(SketchLine_29.result())
+SketchConstraintVertical_12 = Sketch_3.setVertical(SketchLine_27.result())
+SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_33.result())
+SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_31.result())
+SketchConstraintAngle_1 = Sketch_3.setAngleComplementary(SketchLine_26.result(), SketchLine_24.result(), "angle")
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_8&Extrusion_2_1/Generated_Face_7"))
+SketchLine_34 = SketchProjection_3.createdFeature()
+SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_11&Extrusion_2_1/Generated_Face_10"))
+SketchLine_35 = SketchProjection_4.createdFeature()
+SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_34.result())
+SketchConstraintDistance_15 = Sketch_3.setDistance(SketchLine_31.result(), SketchLine_33.endPoint(), "(d6-d5)*coeff")
+SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_33.result(), "h3*coeff")
+SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_30.endPoint(), SketchLine_35.result())
+SketchConstraintDistance_16 = Sketch_3.setDistance(SketchLine_27.result(), SketchLine_28.endPoint(), "(d6-e2)*coeff")
+SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_25.result())
+SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_29.endPoint(), SketchLine_24.startPoint())
+SketchConstraintDistance_17 = Sketch_3.setDistance(SketchLine_26.result(), SketchAPI_Line(SketchLine_35).startPoint(), "h2*coeff")
+SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_26.result(), "d7*coeff")
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_24r-SketchLine_26r-SketchLine_27r-SketchLine_28r-SketchLine_29r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d3*coeff", True)
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
+SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_16&Extrusion_1_1/To_Face_1"))
+SketchLine_36 = SketchProjection_5.createdFeature()
+SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_8&ExtrusionCut_2_1/Modfied_9"))
+SketchLine_37 = SketchProjection_6.createdFeature()
+SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_15&Extrusion_1_1/Generated_Face_14"))
+SketchLine_38 = SketchProjection_7.createdFeature()
+SketchLine_39 = Sketch_4.addLine(-25, -35.00000000000001, -31.24999999999999, -35.00000000000001)
+SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).startPoint(), SketchLine_39.startPoint())
+SketchArc_13 = Sketch_4.addArc(-31.25, -31.25000000000001, -31.24999999999999, -35.00000000000001, -34.99999999999999, -31.25000000000001, True)
+SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchLine_39.endPoint(), SketchArc_13.startPoint())
+SketchConstraintTangent_25 = Sketch_4.setTangent(SketchLine_39.result(), SketchArc_13.results()[1])
+SketchLine_40 = Sketch_4.addLine(-34.99999999999999, -31.25000000000001, -34.99999999999999, -20)
+SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchArc_13.endPoint(), SketchLine_40.startPoint())
+SketchLine_41 = Sketch_4.addLine(-34.99999999999999, -20, -32.49999999999999, -20)
+SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
+SketchLine_42 = Sketch_4.addLine(-32.49999999999999, -20, -32.49999999999999, -31.24999999999389)
+SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
+SketchArc_14 = Sketch_4.addArc(-31.24999999999999, -31.24999999999393, -32.49999999999999, -31.24999999999389, -31.25000000000371, -32.50000000000001, False)
+SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchLine_42.endPoint(), SketchArc_14.startPoint())
+SketchConstraintTangent_26 = Sketch_4.setTangent(SketchLine_42.result(), SketchArc_14.results()[1])
+SketchLine_43 = Sketch_4.addLine(-31.25000000000371, -32.50000000000001, -25, -32.50000000000001)
+SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_14.endPoint(), SketchLine_43.startPoint())
+SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).endPoint(), SketchLine_43.endPoint())
+SketchLine_44 = Sketch_4.addLine(-25, -35.00000000000001, -25, -32.50000000000001)
+SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).startPoint(), SketchLine_44.startPoint())
+SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).endPoint(), SketchLine_44.endPoint())
+SketchConstraintHorizontal_13 = Sketch_4.setHorizontal(SketchLine_41.result())
+SketchConstraintHorizontal_14 = Sketch_4.setHorizontal(SketchLine_43.result())
+SketchConstraintHorizontal_15 = Sketch_4.setHorizontal(SketchLine_39.result())
+SketchConstraintVertical_15 = Sketch_4.setVertical(SketchLine_42.result())
+SketchConstraintVertical_16 = Sketch_4.setVertical(SketchLine_40.result())
+SketchConstraintTangent_27 = Sketch_4.setTangent(SketchArc_13.results()[1], SketchLine_40.result())
+SketchConstraintTangent_28 = Sketch_4.setTangent(SketchArc_14.results()[1], SketchLine_43.result())
+SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_40.result(), SketchLine_44.startPoint(), "h1*coeff")
+SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_13.results()[1], "r2*coeff")
+SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_14.results()[1], "r3*coeff")
+SketchConstraintDistance_19 = Sketch_4.setDistance(SketchLine_41.endPoint(), SketchLine_40.result(), "epaisseur*coeff")
+SketchConstraintDistance_20 = Sketch_4.setDistance(SketchLine_41.startPoint(), SketchLine_39.result(), "h2")
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_39r-SketchArc_13_2f-SketchLine_40r-SketchLine_41r-SketchLine_42r-SketchArc_14_2r-SketchLine_43r-SketchLine_44f")], model.selection(), 0, "e1*coeff")
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"))
+SketchCircle_1 = Sketch_5.addCircle(70, 17.5, 3.125)
+SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5"))
+SketchConstraintDistance_21 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_45.result(), "d9*coeff")
+SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_46 = SketchProjection_8.createdFeature()
+SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19"))
+SketchLine_47 = SketchProjection_9.createdFeature()
+SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_47.result(), "d1*coeff")
+SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou")
+model.do()
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_14"))
+SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5)
+SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/To_Face_1"))
+SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_19&Extrusion_1_1/Generated_Face_18"))
+SketchLine_49 = SketchProjection_10.createdFeature()
+SketchConstraintDistance_23 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_49.result(), "d1*coeff")
+SketchConstraintDistance_23.setName("SketchConstraintDistance_24")
+SketchConstraintRadius_8 = Sketch_6.setRadius(SketchCircle_2.results()[1], "r_trou2")
+SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_10"))
+SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_50.result(), "d_trou")
+SketchConstraintDistance_24.setName("SketchConstraintDistance_25")
+model.do()
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048)
+SketchLine_51.setAuxiliary(True)
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchConstraintCoincidence_65 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
+SketchConstraintCoincidence_66 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_52.result())
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_8"))
+SketchArc_15 = Sketch_7.addArc(102.5, 7.22841614740048, 110, 7.22841614740048, 104.5, 0, True)
+SketchConstraintCoincidence_67 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchArc_15.startPoint())
+SketchConstraintTangent_29 = Sketch_7.setTangent(SketchLine_51.result(), SketchArc_15.results()[1])
+SketchConstraintCoincidence_68 = Sketch_7.setCoincident(SketchLine_53.result(), SketchArc_15.endPoint())
+SketchConstraintRadius_9 = Sketch_7.setRadius(SketchArc_15.results()[1], "r1")
+SketchLine_54 = Sketch_7.addLine(104.5, 0, 110, 0)
+SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchArc_15.endPoint(), SketchLine_54.startPoint())
+SketchConstraintCoincidence_70 = Sketch_7.setCoincident(SketchLine_52.startPoint(), SketchLine_54.endPoint())
+SketchPoint_3 = Sketch_7.addPoint(0, 0)
+SketchLine_55 = Sketch_7.addLine(110, 7.22841614740048, 110, 0)
+SketchConstraintCoincidence_71 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_55.startPoint())
+SketchConstraintCoincidence_72 = Sketch_7.setCoincident(SketchLine_52.startPoint(), SketchLine_55.endPoint())
+SketchConstraintLength_5 = Sketch_7.setLength(SketchLine_54.result(), "5.5*coeff")
+SketchLine_56 = Sketch_7.addLine(110, 12.5, 0, 12.5)
+SketchLine_56.setAuxiliary(True)
+SketchConstraintCoincidence_73 = Sketch_7.setCoincident(SketchLine_56.startPoint(), SketchLine_52.result())
+SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19"))
+SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_57.result())
+SketchConstraintMiddle_1 = Sketch_7.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_57.result())
+SketchConstraintMiddle_2 = Sketch_7.setMiddlePoint(SketchLine_56.startPoint(), SketchLine_52.result())
+SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_1"))
+SketchLine_58 = SketchProjection_11.createdFeature()
+SketchLine_59 = Sketch_7.addLine(55.00000000000002, 0, 55.00000000000002, 25)
+SketchLine_59.setAuxiliary(True)
+SketchLine_60 = Sketch_7.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_59.startPoint(), SketchLine_60.result())
+SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_58.result())
+SketchConstraintMiddle_3 = Sketch_7.setMiddlePoint(SketchLine_59.endPoint(), SketchLine_58.result())
+SketchConstraintVertical_17 = Sketch_7.setVertical(SketchLine_59.result())
+SketchConstraintMirror_1_objects = [SketchArc_15.results()[1], SketchLine_55.result(), SketchLine_54.result()]
+SketchConstraintMirror_1 = Sketch_7.addMirror(SketchLine_56.result(), SketchConstraintMirror_1_objects)
+[SketchArc_16, SketchLine_61, SketchLine_62] = SketchConstraintMirror_1.mirrored()
+SketchConstraintMirror_2_objects = [SketchArc_15.results()[1], SketchLine_55.result(), SketchLine_54.result(), SketchArc_16.results()[1], SketchLine_62.result(), SketchLine_52.result()]
+SketchConstraintMirror_2 = Sketch_7.addMirror(SketchLine_59.result(), SketchConstraintMirror_2_objects)
+[SketchArc_17, SketchLine_63, SketchLine_64, SketchArc_18, SketchLine_65, SketchLine_66] = SketchConstraintMirror_2.mirrored()
+model.do()
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2r-SketchLine_61f-SketchLine_62r"), model.selection("FACE", "Sketch_7/Face-SketchArc_18_2r-SketchLine_65f-SketchLine_66r"), model.selection("FACE", "Sketch_7/Face-SketchArc_17_2r-SketchLine_64r-SketchLine_66r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_15_2r-SketchLine_54f-SketchLine_55r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_10"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
+Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_5_1")], [model.selection("SOLID", "Extrusion_3_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
+model.do()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Part_1, 1)
+model.testNbSubResults(Part_1, [0])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [57])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [314])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [628])
+model.testResultsVolumes(Part_1, [13531.037990141923728515394])
+model.end()
+
+assert(model.checkPythonDump())
