src/SketchPlugin/Test/TestEdgesOrder.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 """
  21     Verify the order of sketch edges is the same after dump
  22 """
  23
  24 from salome.shaper import model
  25
  26 model.begin()
  27 partSet = model.moduleDocument()
  28 Part_1 = model.addPart(partSet)
  29 Part_1_doc = Part_1.document()
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchLine_1 = Sketch_1.addLine(40, 5, 40, -25)
  32 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 30)
  33 SketchLine_2 = Sketch_1.addLine(40, -25, -10, -25)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 50)
  36 SketchLine_3 = Sketch_1.addLine(-10, -25, -10, 5)
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchLine_4 = Sketch_1.addLine(-10, 5, 40, 5)
  39 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  41 model.do()
  42
  43 # Change Length references
  44 SketchConstraintLength_1.feature().refattr("ConstraintEntityA").setObject(SketchLine_3.feature().lastResult())
  45 SketchConstraintLength_2.feature().refattr("ConstraintEntityA").setObject(SketchLine_4.feature().lastResult())
  46 model.do()
  47 # Remove the first line, then build it and constraints from scratch
  48 Part_1_doc.removeFeature(SketchConstraintCoincidence_1.feature())
  49 Part_1_doc.removeFeature(SketchConstraintCoincidence_4.feature())
  50 Part_1_doc.removeFeature(SketchLine_1.feature())
  51 SketchLine_1 = Sketch_1.addLine(40, 5, 40, -25)
  52 Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  53 Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  54 Sketch_1.setLength(SketchLine_1.result(), 20)
  55 Sketch_1.setLength(SketchLine_2.result(), 40)
  56 model.do()
  57 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r")], model.selection(), 10, 0)
  58
  59 # Extrude all lateral faces to check their area
  60 Extrusion_2 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
  61 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2"))
  62 SketchLine_5 = Sketch_2.addLine(0.7346748749771982, 2.736245541082907e-015, 0.7346748749771982, 10.00000000000001)
  63 SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]"), False)
  64 SketchPoint_1 = SketchProjection_1.createdFeature()
  65 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchPoint_1.result())
  66 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
  67 SketchPoint_2 = SketchProjection_2.createdFeature()
  68 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchPoint_2.result())
  69 SketchLine_6 = Sketch_2.addLine(0.7346748749771982, 10.00000000000001, -19.2653251250228, 10.00000000000001)
  70 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  71 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
  72 SketchPoint_3 = SketchProjection_3.createdFeature()
  73 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchPoint_3.result())
  74 SketchLine_7 = Sketch_2.addLine(-19.2653251250228, 10.00000000000001, -19.2653251250228, 2.775557561562891e-015)
  75 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  76 SketchProjection_4 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]"), False)
  77 SketchPoint_4 = SketchProjection_4.createdFeature()
  78 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchPoint_4.result())
  79 SketchLine_8 = Sketch_2.addLine(-19.2653251250228, 2.775557561562891e-015, 0.7346748749771974, 3.386180225106727e-015)
  80 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  81 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchLine_8.endPoint())
  82 Extrusion_2.setNestedSketch(Sketch_2)
  83
  84 Extrusion_3 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
  85 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"))
  86 SketchLine_9 = Sketch_3.addLine(36.86324678550901, 2.286454635368208e-015, 36.86324678550901, 10)
  87 SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]"), False)
  88 SketchPoint_5 = SketchProjection_5.createdFeature()
  89 SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchPoint_5.result())
  90 SketchProjection_6 = Sketch_3.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
  91 SketchPoint_6 = SketchProjection_6.createdFeature()
  92 SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchPoint_6.result())
  93 SketchLine_10 = Sketch_3.addLine(36.86324678550901, 10, -3.136753214490995, 10)
  94 SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  95 SketchProjection_7 = Sketch_3.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
  96 SketchPoint_7 = SketchProjection_7.createdFeature()
  97 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchPoint_7.result())
  98 SketchLine_11 = Sketch_3.addLine(-3.136753214490995, 10, -3.136753214490995, 2.275957200481571e-015)
  99 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
 100 SketchProjection_8 = Sketch_3.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]"), False)
 101 SketchPoint_8 = SketchProjection_8.createdFeature()
 102 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_8.result())
 103 SketchLine_12 = Sketch_3.addLine(-3.136753214490995, 2.275957200481571e-015, 36.86324678550902, 1.387778780781446e-015)
 104 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
 105 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_12.endPoint())
 106 Extrusion_3.setNestedSketch(Sketch_3)
 107
 108 Extrusion_4 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
 109 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"))
 110 SketchLine_13 = Sketch_4.addLine(22.60959895285982, 4.420942808558057e-016, 22.60959895285982, 10)
 111 SketchProjection_9 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]"), False)
 112 SketchPoint_9 = SketchProjection_9.createdFeature()
 113 SketchConstraintCoincidence_21 = Sketch_4.setCoincident(SketchLine_13.startPoint(), SketchPoint_9.result())
 114 SketchProjection_10 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
 115 SketchPoint_10 = SketchProjection_10.createdFeature()
 116 SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchLine_13.endPoint(), SketchPoint_10.result())
 117 SketchLine_14 = Sketch_4.addLine(22.60959895285982, 10, -7.390401047140179, 10)
 118 SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 119 SketchProjection_11 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"), False)
 120 SketchPoint_11 = SketchProjection_11.createdFeature()
 121 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_14.endPoint(), SketchPoint_11.result())
 122 SketchLine_15 = Sketch_4.addLine(-7.390401047140179, 10, -7.390401047140179, 8.881784197001252e-016)
 123 SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 124 SketchProjection_12 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/From_Face]"), False)
 125 SketchPoint_12 = SketchProjection_12.createdFeature()
 126 SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchLine_15.endPoint(), SketchPoint_12.result())
 127 SketchLine_16 = Sketch_4.addLine(-7.390401047140179, 8.881784197001252e-016, 22.60959895285983, 0)
 128 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 129 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
 130 Extrusion_4.setNestedSketch(Sketch_4)
 131
 132 Extrusion_5 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
 133 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"))
 134 SketchLine_17 = Sketch_5.addLine(-10.64977324988603, -1.185841873934692e-016, -10.64977324988603, -10)
 135 SketchProjection_13 = Sketch_5.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/From_Face]"), False)
 136 SketchPoint_13 = SketchProjection_13.createdFeature()
 137 SketchConstraintCoincidence_29 = Sketch_5.setCoincident(SketchLine_17.startPoint(), SketchPoint_13.result())
 138 SketchProjection_14 = Sketch_5.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"), False)
 139 SketchPoint_14 = SketchProjection_14.createdFeature()
 140 SketchConstraintCoincidence_30 = Sketch_5.setCoincident(SketchLine_17.endPoint(), SketchPoint_14.result())
 141 SketchLine_18 = Sketch_5.addLine(-10.64977324988603, -10, 39.35022675011398, -10)
 142 SketchConstraintCoincidence_31 = Sketch_5.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
 143 SketchProjection_15 = Sketch_5.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
 144 SketchPoint_15 = SketchProjection_15.createdFeature()
 145 SketchConstraintCoincidence_32 = Sketch_5.setCoincident(SketchLine_18.endPoint(), SketchPoint_15.result())
 146 SketchLine_19 = Sketch_5.addLine(39.35022675011398, -10, 39.35022675011398, 4.440892098500626e-016)
 147 SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 148 SketchProjection_16 = Sketch_5.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]"), False)
 149 SketchPoint_16 = SketchProjection_16.createdFeature()
 150 SketchConstraintCoincidence_34 = Sketch_5.setCoincident(SketchLine_19.endPoint(), SketchPoint_16.result())
 151 SketchLine_20 = Sketch_5.addLine(39.35022675011398, 4.440892098500626e-016, -10.64977324988603, 0)
 152 SketchConstraintCoincidence_35 = Sketch_5.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 153 SketchConstraintCoincidence_36 = Sketch_5.setCoincident(SketchLine_17.startPoint(), SketchLine_20.endPoint())
 154 Extrusion_5.setNestedSketch(Sketch_5)
 155 model.do()
 156 model.end()
 157
 158 # check volumes
 159 model.testResultsVolumes(Extrusion_2, [4000])
 160 model.testResultsVolumes(Extrusion_3, [3000])
 161 model.testResultsVolumes(Extrusion_4, [5000])
 162 model.testResultsVolumes(Extrusion_5, [2000])
 163
 164 assert(model.checkPythonDump())
 165
 166 # check volumes after dump and restore
 167 model.testResultsVolumes(Extrusion_2, [4000])
 168 model.testResultsVolumes(Extrusion_3, [3000])
 169 model.testResultsVolumes(Extrusion_4, [5000])
 170 model.testResultsVolumes(Extrusion_5, [2000])