src/SketchPlugin/Test/Test1963.py

   1 # Copyright (C) 2018-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 """
  21     Test1963.py
  22     Test case for issue #1963 "Conflicting constraint wrongly raised"
  23 """
  24
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  32 SketchLine_1 = Sketch_1.addLine(6.188, 9.263, 6.188, -3.45)
  33 SketchLine_2 = Sketch_1.addLine(6.188, -3.45, 0, -3.45)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchLine_3 = Sketch_1.addLine(0, -3.45, 0, -6.45)
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchLine_4 = Sketch_1.addLine(0, -6.45, 10.31630157312683, -6.45)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchLine_5 = Sketch_1.addLine(10.31630157312683, -6.45, 10.31630157312683, -3.45)
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  41 SketchLine_6 = Sketch_1.addLine(10.31630157312683, -3.45, 6.538, -3.45)
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  43 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  44 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  45 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  46 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_4.result())
  47 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  48 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
  49 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_2.result())
  50 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  51 SketchLine_7.setName("SketchLine_8")
  52 SketchLine_7.result().setName("SketchLine_8")
  53 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_7.result())
  54 SketchLine_8 = Sketch_1.addLine(6.188, 9.263, 6.376, 9.263)
  55 SketchLine_8.setName("SketchLine_9")
  56 SketchLine_8.result().setName("SketchLine_9")
  57 SketchLine_8.setAuxiliary(True)
  58 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
  59 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
  60 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_1.result(), 6.188)
  61 SketchLine_9 = Sketch_1.addLine(6.376, 9.263, 6.376, -2.284019283906062)
  62 SketchLine_9.setName("SketchLine_10")
  63 SketchLine_9.result().setName("SketchLine_10")
  64 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  65 SketchLine_10 = Sketch_1.addLine(6.376, -2.284019283906062, 6.538, -2.359739840005481)
  66 SketchLine_10.setName("SketchLine_11")
  67 SketchLine_10.result().setName("SketchLine_11")
  68 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  69 SketchLine_11 = Sketch_1.addLine(6.538, -2.359739840005481, 6.538, -3.45)
  70 SketchLine_11.setName("SketchLine_12")
  71 SketchLine_11.result().setName("SketchLine_12")
  72 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  73 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_11.endPoint())
  74 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
  75 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_11.result())
  76 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_9.result(), 0.188)
  77 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.result(), SketchLine_11.endPoint(), 0.35)
  78 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 3)
  79 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_2.result(), 3.45)
  80 SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  81 SketchLine_12.setName("SketchLine_13")
  82 SketchLine_12.result().setName("SketchLine_13")
  83 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_12.result(), 9.263)
  84 SketchLine_13 = Sketch_1.addLine(7.131011037651645, -4.08833050970321, 5.469691015801997, -4.08833050970321)
  85 SketchLine_13.setName("SketchLine_14")
  86 SketchLine_13.result().setName("SketchLine_14")
  87 SketchLine_14 = Sketch_1.addLine(5.469691015801997, -4.08833050970321, 5.469691015801997, -5.799435189085778)
  88 SketchLine_14.setName("SketchLine_15")
  89 SketchLine_14.result().setName("SketchLine_15")
  90 SketchLine_15 = Sketch_1.addLine(5.469691015801997, -5.799435189085778, 7.131011037651645, -5.799435189085778)
  91 SketchLine_15.setName("SketchLine_16")
  92 SketchLine_15.result().setName("SketchLine_16")
  93 SketchLine_16 = Sketch_1.addLine(7.131011037651645, -5.799435189085778, 7.131011037651645, -4.08833050970321)
  94 SketchLine_16.setName("SketchLine_17")
  95 SketchLine_16.result().setName("SketchLine_17")
  96 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
  97 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  98 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  99 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 100 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_13.result())
 101 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_14.result())
 102 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_15.result())
 103 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_16.result())
 104 SketchLine_17 = Sketch_1.addLine(6.282, 9.263, 6.282, -4.088330509703209)
 105 SketchLine_17.setName("SketchLine_18")
 106 SketchLine_17.result().setName("SketchLine_18")
 107 SketchLine_17.setAuxiliary(True)
 108 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_8.result())
 109 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_13.result())
 110 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_17.result())
 111 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_17.startPoint(), SketchLine_8.result())
 112 model.do()
 113
 114 # check sketch is correct
 115 assert(Sketch_1.solverError().value() == "")
 116
 117 SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_17.endPoint(), SketchLine_13.result())
 118 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_5.result(), 1.5, True)
 119 model.do()
 120
 121 # check sketch is still correct
 122 assert(Sketch_1.solverError().value() == "")
 123
 124 model.end()