src/ModelAPI/Test/TestWeakNaming2437.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 model.addParameter(Part_1_doc, "BHD", "8", "Base Hole Diameter")
  27 model.addParameter(Part_1_doc, "BHPD", "14", "Base Hole Plate Diameter")
  28 model.addParameter(Part_1_doc, "BHPS", "2", "Base Hole Plate Thickness")
  29 model.addParameter(Part_1_doc, "BHPFR", "BHPS/4*3", "Base Hole Plate Fillet Radius")
  30 model.addParameter(Part_1_doc, "BPS", "6", "Base Plate Thickness")
  31 model.addParameter(Part_1_doc, "Draft", "100", "Bracket Draft")
  32 model.addParameter(Part_1_doc, "TDI", "14", "Tube Internal Diameter")
  33 model.addParameter(Part_1_doc, "TDE", "TDI+8", "Tube External Diameter")
  34 model.addParameter(Part_1_doc, "TL", "86", "Tube Length")
  35 model.addParameter(Part_1_doc, "Width", "112", "Full Width of Base")
  36 model.addParameter(Part_1_doc, "LegThick", "5")
  37 model.addParameter(Part_1_doc, "BaseLegFillet", "3")
  38 model.addParameter(Part_1_doc, "LegTopFillet", "2")
  39 model.addParameter(Part_1_doc, "BottomCutFillet", "2")
  40 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  41 SketchLine_1 = Sketch_1.addLine(0, 84.99999999999999, 11, 85)
  42 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
  43 SketchLine_2 = SketchProjection_1.createdFeature()
  44 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  45 SketchLine_3 = Sketch_1.addLine(11, 85, 24.4927071104659, 8.479055466987994)
  46 SketchLine_4 = Sketch_1.addLine(27.44713036948842, 6, 56, 6)
  47 SketchLine_5 = Sketch_1.addLine(56, 6, 56, 0)
  48 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  49 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_4")
  50 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  51 SketchLine_6 = SketchProjection_2.createdFeature()
  52 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  53 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_5")
  54 SketchLine_7 = Sketch_1.addLine(56, 0, 20.91066030079079, 0)
  55 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  56 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_6")
  57 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_6.result())
  58 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_7")
  59 SketchLine_8 = Sketch_1.addLine(20.91066030079079, 0, 17.67553693029129, 18.34729635533419)
  60 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  61 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_8")
  62 SketchLine_9 = Sketch_1.addLine(15.70592142426623, 20, 0, 20)
  63 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_2.result())
  64 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_10")
  65 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  66 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_9.result())
  67 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_4.result())
  68 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  69 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_4.endPoint(), SketchLine_6.result(), 6, True)
  70 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_9.endPoint(), SketchLine_6.result(), 20, True)
  71 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_2.result(), "Width/2", True)
  72 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_4.result(), SketchLine_3.result(), "Draft")
  73 SketchArc_1 = Sketch_1.addArc(15.70592142426623, 18, 17.67553693029129, 18.34729635533419, 15.70592142426623, 20, False)
  74 SketchPoint_1 = Sketch_1.addPoint(17.3841206866215, 20)
  75 SketchPoint_1.setAuxiliary(True)
  76 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchPoint_1.coordinates(), SketchLine_3.result(), "LegThick", True)
  77 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_8.result())
  78 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_11")
  79 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_9.result())
  80 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_12")
  81 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_8.endPoint())
  82 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_13")
  83 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_9.startPoint())
  84 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_14")
  85 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_8.result())
  86 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_9.result())
  87 SketchPoint_2 = Sketch_1.addPoint(11, 85)
  88 SketchPoint_2.setAuxiliary(True)
  89 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchPoint_2.coordinates(), SketchLine_7.result(), 85, True)
  90 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchPoint_2.coordinates(), SketchLine_2.result(), "TDE/2", True)
  91 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.result())
  92 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_15")
  93 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_3.result())
  94 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_16")
  95 SketchArc_2 = Sketch_1.addArc(27.44713036950173, 9.00000000000146, 24.4927071104659, 8.479055466987994, 27.44713036948842, 6, False)
  96 SketchArc_2.setName("SketchArc_3")
  97 SketchArc_2.result().setName("SketchArc_3")
  98 SketchArc_2.results()[1].setName("SketchArc_3_2")
  99 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_3.endPoint())
 100 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_19")
 101 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
 102 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_20")
 103 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_3.result())
 104 SketchConstraintTangent_3.setName("SketchConstraintTangent_5")
 105 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_4.result())
 106 SketchConstraintTangent_4.setName("SketchConstraintTangent_6")
 107 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], "BaseLegFillet")
 108 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], "LegTopFillet")
 109 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_3.result(), SketchLine_8.result())
 110 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchPoint_2.coordinates())
 111 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
 112 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.endPoint())
 113 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
 114 SketchConstraintMirror_1_objects = [SketchLine_3.result(), SketchLine_1.result(), SketchLine_4.result(), SketchLine_7.result(), SketchArc_2.results()[1], SketchLine_5.result(), SketchLine_8.result(), SketchLine_9.result(), SketchArc_1.results()[1]]
 115 SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_2.result(), SketchConstraintMirror_1_objects)
 116 [SketchLine_10, SketchLine_11, SketchLine_12, SketchLine_13, SketchArc_3, SketchLine_14, SketchLine_15, SketchLine_16, SketchArc_4] = SketchConstraintMirror_1.mirrored()
 117 SketchArc_4.setName("SketchArc_5")
 118 SketchArc_4.result().setName("SketchArc_5")
 119 SketchArc_4.results()[1].setName("SketchArc_5_2")
 120 SketchArc_3.setName("SketchArc_4")
 121 SketchArc_3.result().setName("SketchArc_4")
 122 SketchArc_3.results()[1].setName("SketchArc_4_2")
 123 model.do()
 124 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 125 SketchLine_17 = Sketch_2.addLine(-18, 39.99999999999999, 18, 39.99999999999999)
 126 SketchLine_18 = Sketch_2.addLine(20, 37.99999999999999, 20, -5)
 127 SketchLine_19 = Sketch_2.addLine(20, -5, -20, -5)
 128 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 129 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_22")
 130 SketchLine_20 = Sketch_2.addLine(-20, -5, -20, 37.99999999999999)
 131 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 132 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_23")
 133 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_18.result())
 134 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_20.result())
 135 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_17.result())
 136 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_19.result())
 137 SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 138 SketchLine_21 = SketchProjection_3.createdFeature()
 139 SketchArc_5 = Sketch_2.addArc(18, 37.99999999999999, 20, 37.99999999999999, 18, 39.99999999999999, False)
 140 SketchArc_5.setName("SketchArc_6")
 141 SketchArc_5.result().setName("SketchArc_6")
 142 SketchArc_5.results()[1].setName("SketchArc_6_2")
 143 SketchPoint_3 = Sketch_2.addPoint(20, 40)
 144 SketchPoint_3.setAuxiliary(True)
 145 SketchConstraintDistance_7 = Sketch_2.setDistance(SketchPoint_3.coordinates(), SketchLine_21.result(), 40, True)
 146 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchLine_17.result())
 147 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_25")
 148 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchLine_18.result())
 149 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_26")
 150 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchArc_5.startPoint(), SketchLine_18.startPoint())
 151 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_27")
 152 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_17.endPoint())
 153 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_28")
 154 SketchConstraintTangent_5 = Sketch_2.setTangent(SketchArc_5.results()[1], SketchLine_17.result())
 155 SketchConstraintTangent_5.setName("SketchConstraintTangent_7")
 156 SketchConstraintTangent_6 = Sketch_2.setTangent(SketchArc_5.results()[1], SketchLine_18.result())
 157 SketchConstraintTangent_6.setName("SketchConstraintTangent_8")
 158 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_5.results()[1], "BottomCutFillet")
 159 SketchArc_6 = Sketch_2.addArc(-18, 37.99999999999999, -18, 39.99999999999999, -20, 37.99999999999999, False)
 160 SketchArc_6.setName("SketchArc_7")
 161 SketchArc_6.result().setName("SketchArc_7")
 162 SketchArc_6.results()[1].setName("SketchArc_7_2")
 163 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchArc_6.startPoint(), SketchLine_17.startPoint())
 164 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_24")
 165 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchArc_6.endPoint(), SketchLine_20.endPoint())
 166 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_29")
 167 SketchConstraintTangent_7 = Sketch_2.setTangent(SketchArc_6.results()[1], SketchLine_17.result())
 168 SketchConstraintTangent_7.setName("SketchConstraintTangent_9")
 169 SketchConstraintTangent_8 = Sketch_2.setTangent(SketchArc_6.results()[1], SketchLine_20.result())
 170 SketchConstraintTangent_8.setName("SketchConstraintTangent_10")
 171 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_6.results()[1], "BottomCutFillet")
 172 SketchConstraintDistance_8 = Sketch_2.setDistance(SketchLine_19.startPoint(), SketchLine_21.result(), 5, True)
 173 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
 174 SketchLine_22 = SketchProjection_4.createdFeature()
 175 SketchConstraintDistance_9 = Sketch_2.setDistance(SketchLine_19.startPoint(), SketchLine_22.result(), "(TL/2-3)-20", True)
 176 SketchConstraintDistance_10 = Sketch_2.setDistance(SketchLine_19.endPoint(), SketchLine_22.result(), "(TL/2-3)-20", True)
 177 model.do()
 178 Wire_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_11"), model.selection("EDGE", "Sketch_1/SketchLine_10"), model.selection("EDGE", "Sketch_1/SketchArc_4_2"), model.selection("EDGE", "Sketch_1/SketchLine_12"), model.selection("EDGE", "Sketch_1/SketchLine_14"), model.selection("EDGE", "Sketch_1/SketchLine_13"), model.selection("EDGE", "Sketch_1/SketchLine_15"), model.selection("EDGE", "Sketch_1/SketchArc_5_2"), model.selection("EDGE", "Sketch_1/SketchLine_16"), model.selection("EDGE", "Sketch_1/SketchLine_9"), model.selection("EDGE", "Sketch_1/SketchArc_1_2"), model.selection("EDGE", "Sketch_1/SketchLine_8"), model.selection("EDGE", "Sketch_1/SketchLine_7"), model.selection("EDGE", "Sketch_1/SketchLine_5"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchArc_3_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_1")]
 179 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
 180 Wire_2_objects = [model.selection("EDGE", "Sketch_2/SketchLine_17"), model.selection("EDGE", "Sketch_2/SketchArc_7_2"), model.selection("EDGE", "Sketch_2/SketchLine_20"), model.selection("EDGE", "Sketch_2/SketchLine_19"), model.selection("EDGE", "Sketch_2/SketchLine_18"), model.selection("EDGE", "Sketch_2/SketchArc_6_2")]
 181 Wire_2 = model.addWire(Part_1_doc, Wire_2_objects)
 182 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_1_1")])
 183 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_2_1")])
 184 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_2_1")], model.selection(), 10, 0)
 185 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_1_1")], model.selection(), 10, 0)
 186 Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], [model.selection("SOLID", "Extrusion_1_1")])
 187 model.do()
 188 model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc)
 189 model.end()