src/ModelAPI/Test/TestWeakNaming2291.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(36.44136828644502, 18.79607416879796, -16.36664961636829, 18.79607416879796)
  28 SketchLine_2 = Sketch_1.addLine(-16.36664961636829, 18.79607416879796, -16.36664961636829, -16.62237851662404)
  29 SketchLine_3 = Sketch_1.addLine(-16.36664961636829, -16.62237851662404, 36.44136828644502, -16.62237851662404)
  30 SketchLine_4 = Sketch_1.addLine(36.44136828644502, -16.62237851662404, 36.44136828644502, 18.79607416879796)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 model.do()
  40 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 10, 0)
  41 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f"))
  42 SketchLine_5 = Sketch_2.addLine(-3.660618520812283, -7.666051414039341, -9.927240775274454, -7.666051414039341)
  43 SketchLine_6 = Sketch_2.addLine(-9.927240775274454, -7.666051414039341, -9.927240775274454, 7.885614342469023)
  44 SketchLine_7 = Sketch_2.addLine(-9.927240775274454, 7.885614342469023, -3.660618520812283, 7.885614342469023)
  45 SketchLine_8 = Sketch_2.addLine(-3.660618520812283, 7.885614342469023, -3.660618520812283, -7.666051414039341)
  46 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  47 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  48 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  49 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  50 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  51 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  52 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  53 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  54 model.do()
  55 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_7r-SketchLine_6r-SketchLine_5r")], model.selection(), 10, 0)
  56 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
  57 model.do()
  58 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  59 model.end()