src/FiltersPlugin/Test/TestFilter_RelativeToSolid_Out.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  30 SketchLine_1 = SketchProjection_1.createdFeature()
  31 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  32 SketchLine_2 = SketchProjection_2.createdFeature()
  33 SketchArc_1 = Sketch_1.addArc(0, 0, 20, 0, 0, 20, False)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.center(), SketchAPI_Line(SketchLine_2).startPoint())
  37 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 20)
  38 SketchLine_3 = Sketch_1.addLine(0, 32.83768482493814, 29.63380351263586, 0)
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_2.result())
  40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
  41 SketchLine_4 = Sketch_1.addLine(29.63380351263586, 0, 62.471488337574, 29.63380351263586)
  42 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  43 SketchLine_5 = Sketch_1.addLine(62.471488337574, 29.63380351263586, 32.83768482493814, 62.471488337574)
  44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  45 SketchLine_6 = Sketch_1.addLine(32.83768482493814, 62.471488337574, 0, 32.83768482493814)
  46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  47 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_6.endPoint())
  48 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_3.result(), SketchLine_4.result())
  49 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_3.result(), SketchLine_5.result())
  50 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_4.result(), SketchLine_6.result())
  51 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_3.result(), 22, True)
  52 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
  53 SketchLine_7 = Sketch_1.addLine(0, 20, 0, 0)
  54 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_7.startPoint())
  55 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_7.endPoint())
  56 SketchLine_8 = Sketch_1.addLine(0, 0, 20, 0)
  57 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_8.startPoint())
  58 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_8.endPoint())
  59 model.do()
  60 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f"), model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_7f-SketchLine_8f")], model.selection(), 30, 0)
  61 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  62 SketchCircle_1 = Sketch_2.addCircle(28.24714778717828, 31.38901581881253, 10)
  63 SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
  64 SketchLine_9 = SketchProjection_3.createdFeature()
  65 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_9.result(), 20, True)
  66 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"), False)
  67 SketchLine_10 = SketchProjection_4.createdFeature()
  68 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_10.result(), 20, True)
  69 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 10)
  70 model.do()
  71 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2r_wire")], model.selection(), 10, 0)
  72 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection(), 0, 10)
  73 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection(), -10, 20)
  74 Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 10)
  75 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], 50, 10, 10)
  76 Filters = model.filters(Part_1_doc, [model.addFilter(name = "RelativeToSolid", args = [model.selection("SOLID", "Extrusion_1_1"), "out"])])
  77 model.end()
  78
  79 Reference = {
  80     # Faces of solid 1
  81     model.selection("FACE", "Extrusion_1_1/To_Face"): False,
  82     model.selection("FACE", "Extrusion_1_1/From_Face"): False,
  83     model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"): False,
  84     model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"): False,
  85     model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"): False,
  86     model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"): False,
  87     # Faces of solid 2
  88     model.selection("FACE", "Extrusion_1_2/To_Face"): True,
  89     model.selection("FACE", "Extrusion_1_2/From_Face"): True,
  90     model.selection("FACE", "Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7"): True,
  91     model.selection("FACE", "Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8"): True,
  92     model.selection("FACE", "Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2"): True,
  93     # Faces of solid 3
  94     model.selection("FACE", "Extrusion_2_1/To_Face"): True,
  95     model.selection("FACE", "Extrusion_2_1/From_Face"): False,
  96     model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2"): False,
  97     # Faces of solid 4
  98     model.selection("FACE", "Extrusion_3_1/To_Face"): False,
  99     model.selection("FACE", "Extrusion_3_1/From_Face"): False,
 100     model.selection("FACE", "Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2"): False,
 101     # Faces of solid 5
 102     model.selection("FACE", "Extrusion_4_1/To_Face"): False,
 103     model.selection("FACE", "Extrusion_4_1/From_Face"): False,
 104     model.selection("FACE", "Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2"): False,
 105     # Faces of solid 6
 106     model.selection("FACE", "Translation_1_1/MF:Translated&Cylinder_1_1/Face_1"): False,
 107     model.selection("FACE", "Translation_1_1/MF:Translated&Cylinder_1_1/Face_2"): False,
 108     model.selection("FACE", "Translation_1_1/MF:Translated&Cylinder_1_1/Face_3"): False,
 109
 110     # Edges of solid 1
 111     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"): False,
 112     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]"): False,
 113     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"): False,
 114     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"): False,
 115     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/From_Face]"): False,
 116     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"): False,
 117     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/From_Face]"): False,
 118     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"): False,
 119     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"): False,
 120     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"): False,
 121     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/From_Face]"): False,
 122     model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"): False,
 123     # Edges of solid 2
 124     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/To_Face]"): True,
 125     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/From_Face]"): True,
 126     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/From_Face]"): True,
 127     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/From_Face]"): True,
 128     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8]"): True,
 129     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8]"): True,
 130     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7]"): True,
 131     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/To_Face]"): True,
 132     model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/To_Face]"): True,
 133     # Edges of solid 3
 134     model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/To_Face]"): True,
 135     model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/From_Face]"): False,
 136     model.selection("EDGE", "([Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/From_Face])([Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/To_Face])"): False,
 137     # Edges of solid 4
 138     model.selection("EDGE", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/To_Face]"): False,
 139     model.selection("EDGE", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/From_Face]"): False,
 140     model.selection("EDGE", "([Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/From_Face])([Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/To_Face])"): False,
 141     # Edges of solid 5
 142     model.selection("EDGE", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/To_Face]"): False,
 143     model.selection("EDGE", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/From_Face]"): False,
 144     model.selection("EDGE", "([Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/From_Face])([Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/To_Face])"): False,
 145     # Edges of solid 6
 146     model.selection("EDGE", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_2]"): False,
 147     model.selection("EDGE", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_3]"): False,
 148     model.selection("EDGE", "([Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_2])([Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_3])"): True,
 149
 150     # Vertices of solid 1
 151     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"): False,
 152     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"): False,
 153     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/From_Face]"): False,
 154     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/From_Face]"): False,
 155     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"): False,
 156     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"): False,
 157     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/From_Face]"): False,
 158     model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/From_Face]"): False,
 159     # Vertices of solid 2
 160     model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/To_Face]"): True,
 161     model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/To_Face]"): True,
 162     model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/From_Face]"): True,
 163     model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/To_Face]"): True,
 164     model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/From_Face]"): True,
 165     model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/From_Face]"): True,
 166     # Vertices of solid 3
 167     model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/To_Face]"): True,
 168     model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/From_Face]"): False,
 169     # Vertices of solid 4
 170     model.selection("VERTEX", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/To_Face]"): False,
 171     model.selection("VERTEX", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/From_Face]"): False,
 172     # Vertices of solid 5
 173     model.selection("VERTEX", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/To_Face]"): False,
 174     model.selection("VERTEX", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/From_Face]"): False,
 175     # Vertices of solid 6
 176     model.selection("VERTEX", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_2]"): True,
 177     model.selection("VERTEX", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_3]"): True,
 178 }
 179 model.checkFilter(Part_1_doc, model, Filters, Reference)