src/FeaturesPlugin/Test/TestPlacement_MultiLevelCompound_v95_1.py

   1 # Copyright (C) 2020-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
  29 LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20, 2)
  30 LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 20, 2)
  31 Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  32 SketchEllipse_1 = Sketch_1.addEllipse(11.18033988749894, -50, 22.36067977499789, -50, 10)
  33 [SketchPoint_1, SketchPoint_2, SketchPoint_3, SketchPoint_4, SketchPoint_5, SketchPoint_6, SketchPoint_7, SketchLine_1, SketchLine_2] = SketchEllipse_1.construction(center = "aux", firstFocus = "aux", secondFocus = "aux", majorAxisStart = "aux", majorAxisEnd = "aux", minorAxisStart = "aux", minorAxisEnd = "aux", majorAxis = "aux", minorAxis = "aux")
  34 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  35 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 30)
  36 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 20)
  37 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  38 SketchLine_3 = SketchProjection_1.createdFeature()
  39 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_3.result())
  40 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_3).startPoint(), SketchAPI_Point(SketchPoint_3).coordinates(), 50, True)
  41 SketchCircle_1 = Sketch_1.addCircle(41.18033988749897, -50, 5)
  42 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_1.result())
  43 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchEllipse_1.majorAxisPositive(), SketchCircle_1.center(), 15, True)
  44 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 5)
  45 SketchMultiRotation_1 = Sketch_1.addRotation([SketchEllipse_1.result(), SketchCircle_1.results()[1]], SketchAPI_Point(SketchPoint_3).coordinates(), 360, 3, True)
  46 [SketchEllipse_2, SketchEllipse_3, SketchCircle_2, SketchCircle_3] = SketchMultiRotation_1.rotated()
  47 model.do()
  48 Sketch_1.changeFacesOrder([[SketchEllipse_1.result(), SketchEllipse_1.result(), SketchEllipse_2.result(), SketchEllipse_3.result()],
  49                            [SketchCircle_1.results()[1]],
  50                            [SketchEllipse_2.result(), SketchEllipse_2.result(), SketchEllipse_3.result(), SketchEllipse_1.result()],
  51                            [SketchEllipse_1.result(), SketchEllipse_3.result(), SketchEllipse_2.result()],
  52                            [SketchEllipse_3.result(), SketchEllipse_2.result(), SketchEllipse_1.result()],
  53                            [SketchEllipse_1.result(), SketchEllipse_2.result(), SketchEllipse_3.result()],
  54                            [SketchEllipse_1.result(), SketchEllipse_3.result(), SketchEllipse_2.result()],
  55                            [SketchEllipse_2.result(), SketchEllipse_3.result(), SketchEllipse_3.result(), SketchEllipse_1.result()],
  56                            [SketchCircle_2.results()[1]],
  57                            [SketchCircle_3.results()[1]]
  58                           ])
  59 model.do()
  60 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
  61 Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3")])
  62 Compound_2_objects = [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPOUND", "Compound_1_1"), model.selection("SOLID", "Extrusion_1_4")]
  63 Compound_2 = model.addCompound(Part_1_doc, Compound_2_objects)
  64 Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], model.selection("FACE", "LinearCopy_2_1_1_1/MF:Translated&Cylinder_1_1/Face_2"), model.selection("FACE", "Compound_2_1_2_1/Modified_Face&Extrusion_1_2/To_Face"), centering = True, keepSubResults = True)
  65
  66 model.end()
  67
  68 from GeomAPI import *
  69
  70 model.testNbResults(Placement_1, 1)
  71 model.testNbSubResults(Placement_1, [2])
  72 model.testNbSubShapes(Placement_1, GeomAPI_Shape.SOLID, [4])
  73 model.testNbSubShapes(Placement_1, GeomAPI_Shape.FACE, [12])
  74 model.testNbSubShapes(Placement_1, GeomAPI_Shape.EDGE, [24])
  75 model.testNbSubShapes(Placement_1, GeomAPI_Shape.VERTEX, [48])
  76 model.testResultsVolumes(Placement_1, [3141.592653589793])
  77
  78 TOLERANCE = 1.e-7
  79 REF_C = GeomAPI_Pnt(20.590169943749483, -15, 10)
  80 midPoint = Placement_1.defaultResult().shape().middlePoint()
  81 assert(midPoint.distance(REF_C) < TOLERANCE)
  82
  83 REF_SUB = [GeomAPI_Pnt(30.590169943749483, -25, 10), GeomAPI_Pnt(10, 20, 5)]
  84 for ind in range(0, len(REF_SUB)):
  85     midPoint = Placement_1.result().subResult(ind).resultSubShapePair()[0].shape().middlePoint()
  86     assert(midPoint.distance(REF_SUB[ind]) < TOLERANCE)
  87
  88 assert(model.checkPythonDump())