src/FeaturesPlugin/Test/TestBooleanFuse_SolidCompound_SolidCompound.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-26.93407123287669, 40.82195171232873, -80.80221369863011, 40.82195171232873)
  28 SketchLine_2 = Sketch_1.addLine(-80.80221369863011, 40.82195171232873, -80.80221369863011, -8.837742123287665)
  29 SketchLine_3 = Sketch_1.addLine(-80.80221369863011, -8.837742123287665, -26.93407123287669, -8.837742123287665)
  30 SketchLine_4 = Sketch_1.addLine(-26.93407123287669, -8.837742123287665, -26.93407123287669, 40.82195171232873)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 SketchLine_5 = Sketch_1.addLine(91.74418013698632, 40.82195171232873, 36.19265821917805, 40.82195171232873)
  40 SketchLine_6 = Sketch_1.addLine(36.19265821917805, 40.82195171232873, 36.19265821917805, -15.57125993150685)
  41 SketchLine_7 = Sketch_1.addLine(36.19265821917805, -15.57125993150685, 91.74418013698632, -15.57125993150685)
  42 SketchLine_8 = Sketch_1.addLine(91.74418013698632, -15.57125993150685, 91.74418013698632, 40.82195171232873)
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  45 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  48 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  49 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  50 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  51 model.do()
  52 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 100, 0)
  53 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  54 SketchLine_9 = Sketch_2.addLine(-14.30872534246576, 22.30477773972602, -41.24279657534246, 22.30477773972602)
  55 SketchLine_10 = Sketch_2.addLine(-41.24279657534246, 22.30477773972602, -41.24279657534246, 1.262534589041107)
  56 SketchLine_11 = Sketch_2.addLine(-41.24279657534246, 1.262534589041107, -14.30872534246576, 1.262534589041107)
  57 SketchLine_12 = Sketch_2.addLine(-14.30872534246576, 1.262534589041107, -14.30872534246576, 22.30477773972602)
  58 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
  59 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  60 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  61 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  62 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
  63 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
  64 SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
  65 SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
  66 SketchLine_13 = Sketch_2.addLine(123.7283897260274, 22.30477773972602, 74.91038561643839, 22.30477773972602)
  67 SketchLine_14 = Sketch_2.addLine(74.91038561643839, 22.30477773972602, 74.91038561643839, -0.4208448630136968)
  68 SketchLine_15 = Sketch_2.addLine(74.91038561643839, -0.4208448630136968, 123.7283897260274, -0.4208448630136968)
  69 SketchLine_16 = Sketch_2.addLine(123.7283897260274, -0.4208448630136968, 123.7283897260274, 22.30477773972602)
  70 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
  71 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  72 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  73 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  74 SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_13.result())
  75 SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_14.result())
  76 SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_15.result())
  77 SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_16.result())
  78 model.do()
  79 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 40, -20)
  80 Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1")])
  81 Compound_2 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
  82 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
  83 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  84 model.do()
  85 model.end()
  86
  87 from GeomAPI import  GeomAPI_Shape
  88
  89 model.testNbResults(Fuse_1, 1)
  90 model.testNbSubResults(Fuse_1, [2])
  91 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [2])
  92 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [22])
  93 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [96])
  94 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [192])
  95
  96 assert(model.checkPythonDump())