src/FeaturesPlugin/Test/TestBooleanCut_EdgeCompound_Solid.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-28.62948623265935, 53.77363153293705, 40.23707952134417, 53.11775947813702)
  28 SketchLine_2 = Sketch_1.addLine(-26.66187006825925, 26.22700523133564, 40.89295157614425, 26.22700523133564)
  29 model.do()
  30 Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_2")])
  31 Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 10)
  32 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  33 SketchLine_3 = Sketch_2.addLine(14.6580693841429, 60.98822413573743, -10.2650686982584, 60.98822413573743)
  34 SketchLine_4 = Sketch_2.addLine(-10.2650686982584, 60.98822413573743, -10.2650686982584, 18.35654057373522)
  35 SketchLine_5 = Sketch_2.addLine(-10.2650686982584, 18.35654057373522, 14.6580693841429, 18.35654057373522)
  36 SketchLine_6 = Sketch_2.addLine(14.6580693841429, 18.35654057373522, 14.6580693841429, 60.98822413573743)
  37 SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  40 SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  41 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_4.result())
  43 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_5.result())
  44 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_6.result())
  45 Extrusion_1.setNestedSketch(Sketch_2)
  46 Cut_1 = model.addCut(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
  47 model.testHaveNamingSubshapes(Cut_1, model, Part_1_doc)
  48 model.do()
  49 model.end()
  50
  51 from GeomAPI import  GeomAPI_Shape
  52
  53 model.testNbResults(Cut_1, 1)
  54 model.testNbSubResults(Cut_1, [4])
  55 model.testNbSubShapes(Cut_1, GeomAPI_Shape.SOLID, [0])
  56 model.testNbSubShapes(Cut_1, GeomAPI_Shape.FACE, [0])
  57 model.testNbSubShapes(Cut_1, GeomAPI_Shape.EDGE, [4])
  58 model.testNbSubShapes(Cut_1, GeomAPI_Shape.VERTEX, [8])
  59
  60 assert(model.checkPythonDump())