src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Face.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
  28 SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
  29 SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
  30 SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
  40 SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
  41 SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
  42 SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  45 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  48 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  49 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  50 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  51 SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
  52 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
  53 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
  54 SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
  55 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
  56 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
  57 model.do()
  58 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  59 SketchLine_11 = Sketch_2.addLine(19.22650602409638, 27.01445783132531, -12.83325439216414, 27.01445783132531)
  60 SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 27.01445783132531, -12.83325439216414, 11.0281619215649)
  61 SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 11.0281619215649, 19.22650602409638, 11.0281619215649)
  62 SketchLine_14 = Sketch_2.addLine(19.22650602409638, 11.0281619215649, 19.22650602409638, 27.01445783132531)
  63 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
  64 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  65 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  66 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  67 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_11.result())
  68 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_12.result())
  69 SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
  70 SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
  71 model.do()
  72 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  73 Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_11r-SketchLine_12f-SketchLine_13f-SketchLine_14f")])
  74 Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
  75 Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("COMPOUND", "Compound_1_1")])
  76 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  77 model.do()
  78 model.end()
  79
  80 from GeomAPI import  GeomAPI_Shape
  81
  82 model.testNbResults(Common_1, 1)
  83 model.testNbSubResults(Common_1, [0])
  84 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
  85 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
  86 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
  87 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
  88
  89 assert(model.checkPythonDump())