1 # Copyright (C) 2019-2024 CEA, EDF
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
21 from SketchAPI import *
23 from salome.shaper import model
26 partSet = model.moduleDocument()
27 Part_1 = model.addPart(partSet)
28 Part_1_doc = Part_1.document()
29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
30 SketchLine_1 = Sketch_1.addLine(6.188, 9.028, 6.188, -3.45)
31 SketchLine_2 = Sketch_1.addLine(6.188, -3.45, 0, -3.45)
32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
33 SketchLine_3 = Sketch_1.addLine(0, -3.45, 0, -6.45)
34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
35 SketchLine_4 = Sketch_1.addLine(0, -6.45, 7.782, -6.45)
36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
37 SketchLine_5 = Sketch_1.addLine(7.782, -6.45, 7.782, -3.45)
38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
39 SketchLine_6 = Sketch_1.addLine(7.782, -3.45, 6.538, -3.45)
40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
41 SketchLine_7 = Sketch_1.addLine(6.538, -3.45, 6.538, -2.4)
42 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
43 SketchLine_8 = Sketch_1.addLine(6.538, -2.4, 6.376, -2.25)
44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
45 SketchLine_9 = Sketch_1.addLine(6.376, -2.25, 6.376, 9.028)
46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
47 SketchLine_10 = Sketch_1.addLine(6.376, 9.028, 6.188, 9.028)
48 SketchLine_10.setAuxiliary(True)
49 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
50 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.endPoint())
51 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
52 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
53 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
54 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
55 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result())
56 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_2.result())
57 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
58 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_4.result())
59 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchLine_2.result())
60 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
61 SketchLine_11 = SketchProjection_1.createdFeature()
62 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_11.result())
63 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_5.result(), 3)
64 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_11).startPoint(), SketchLine_1.result(), 6.188, True)
65 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_7.result())
66 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
67 SketchLine_12 = SketchProjection_2.createdFeature()
68 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_9.endPoint(), SketchLine_12.result(), 9.028, True)
69 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), 0.188, True)
70 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_7.result(), 0.35, True)
71 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchLine_7.endPoint(), SketchLine_8.endPoint(), 0.15)
72 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_12.result(), 3.45, True)
73 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_12.result(), 2.25, True)
74 SketchLine_13 = Sketch_1.addLine(7.032, -4.05, 5.532, -4.05)
75 SketchLine_14 = Sketch_1.addLine(5.532, -4.05, 5.532, -5.85)
76 SketchLine_15 = Sketch_1.addLine(5.532, -5.85, 7.032, -5.85)
77 SketchLine_16 = Sketch_1.addLine(7.032, -5.85, 7.032, -4.05)
78 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
79 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
80 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
81 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
82 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_13.result())
83 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_14.result())
84 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_15.result())
85 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_16.result())
86 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_14.result(), 1.8)
87 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_15.result(), 1.5)
88 SketchLine_17 = Sketch_1.addLine(6.282, -4.05, 6.282, 9.028)
89 SketchLine_17.setAuxiliary(True)
90 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_13.result())
91 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_10.result())
92 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_17.result())
93 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_17.startPoint(), SketchLine_13.result())
94 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_17.startPoint(), SketchLine_5.result(), 1.5, True)
95 SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_10.result(), SketchLine_17.endPoint())
96 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_14.startPoint(), SketchLine_2.result(), 0.6, True)
97 SketchLine_18 = Sketch_1.addLine(6.376, 9.028, 6.535, 9.187)
98 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_18.startPoint())
99 SketchLine_19 = Sketch_1.addLine(6.535, 9.187, 6.535, 10.256)
100 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
101 SketchLine_20 = Sketch_1.addLine(6.535, 10.256, 6.185, 10.256)
102 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
103 SketchLine_21 = Sketch_1.addLine(6.185, 10.256, 4.9175, 10.94235984621998)
104 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
105 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_20.result())
106 SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_19.result())
107 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_10.result(), SketchLine_18.result(), 45, type = "Supplementary")
108 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_20.result(), 0.35)
109 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_19.endPoint(), SketchLine_12.result(), 10.256, True)
110 SketchArc_1 = Sketch_1.addArc(0, 2.425, 4.9175, 10.94235984621998, 0, 12.26, False)
111 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_1.center())
112 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchArc_1.startPoint())
113 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_1.endPoint())
114 SketchLine_22 = Sketch_1.addLine(6.188, 9.028, 6.082, 9.532)
115 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_22.startPoint())
116 SketchArc_2 = Sketch_1.addArc(4.79378612024245, 9.263, 6.082, 9.532, 5.676067550792229, 10.23944020672391, False)
117 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint())
118 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 1.316)
119 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchArc_2.startPoint(), SketchLine_1.result(), 0.106, True)
120 SketchLine_23 = Sketch_1.addLine(5.676067550792229, 10.23944020672391, 5.405090045827156, 10.43837553323928)
121 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_23.startPoint())
122 SketchLine_24 = Sketch_1.addLine(5.405090045827156, 10.43837553323928, 5.126644475052085, 10.62934617154252)
123 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
124 SketchLine_25 = Sketch_1.addLine(5.126644475052085, 10.62934617154252, 4.8355, 10.80033167999934)
125 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
126 SketchArc_3 = Sketch_1.addArc(0, 2.425, 4.8355, 10.80033167999934, 0, 12.096, False)
127 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_3.center())
128 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchArc_3.startPoint())
129 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_3.endPoint())
130 SketchLine_26 = Sketch_1.addLine(0, 12.096, 0, 12.26)
131 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_26.startPoint())
132 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_26.endPoint())
133 SketchConstraintDistance_11 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_12.result(), 2.425, True)
134 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_1.center())
135 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_26.result(), 0.164)
136 SketchLine_27 = Sketch_1.addLine(0, 2.425, 4.9175, 10.94235984621998)
137 SketchLine_27.setAuxiliary(True)
138 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_27.startPoint())
139 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_27.endPoint())
140 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_27.result())
141 SketchLine_28 = Sketch_1.addLine(0, 2.425, 5.21991026555713, 10.77860263646605)
142 SketchLine_28.setAuxiliary(True)
143 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_28.startPoint())
144 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_21.result())
145 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_25.startPoint())
146 SketchLine_29 = Sketch_1.addLine(0, 2.425, 5.523638941362955, 10.61413149862094)
147 SketchLine_29.setAuxiliary(True)
148 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_29.startPoint())
149 SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_21.result())
150 SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_29.result(), SketchLine_24.startPoint())
151 SketchConstraintDistance_12 = Sketch_1.setDistance(SketchLine_25.startPoint(), SketchLine_28.endPoint(), 0.176, True)
152 SketchConstraintDistance_13 = Sketch_1.setDistance(SketchLine_24.startPoint(), SketchLine_29.endPoint(), 0.212, True)
153 SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_28.result(), SketchLine_11.result(), 32, type = "Direct")
154 SketchConstraintAngle_3 = Sketch_1.setAngle(SketchLine_29.result(), SketchLine_11.result(), 34, type = "Direct")
155 SketchConstraintAngle_4 = Sketch_1.setAngle(SketchLine_27.result(), SketchLine_11.result(), 30, type = "Direct")
156 SketchLine_30 = Sketch_1.addLine(4.79378612024245, 9.263, 5.676067550792229, 10.23944020672391)
157 SketchLine_30.setAuxiliary(True)
158 SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.startPoint())
159 SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_30.endPoint())
160 SketchLine_31 = Sketch_1.addLine(4.79378612024245, 9.263, 4.79378612024245, 10.72808112087839)
161 SketchLine_31.setAuxiliary(True)
162 SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint())
163 SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_31.result())
164 SketchConstraintAngle_5 = Sketch_1.setAngle(SketchLine_30.result(), SketchLine_31.result(), 42.1, type = "Direct")
165 SketchConstraintDistance_14 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_12.result(), 9.263, True)
166 SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_27.result())
167 SketchConstraintDistance_15 = Sketch_1.setDistance(SketchLine_22.endPoint(), SketchLine_12.result(), 9.532, True)
168 SketchConstraintDistance_16 = Sketch_1.setDistance(SketchLine_18.endPoint(), SketchLine_12.result(), 9.187, True)
169 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 9.835)
171 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", (3.891, 0, 2.905000000000017))], model.selection("EDGE", "PartSet/OZ"), 360, 0)
172 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
173 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX_5", (0, 0, 2.425)), False)
174 SketchPoint_1 = SketchProjection_3.createdFeature()
175 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", (0, 0, 12.178)), False)
176 SketchLine_32 = SketchProjection_4.createdFeature()
177 SketchArc_4 = Sketch_2.addArc(0, 2.425, 0, 12.178, 5.453808387550563, 10.51060344512907, True)
178 SketchArc_4.setAuxiliary(True)
179 SketchConstraintCoincidence_50 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchArc_4.center())
180 SketchConstraintCoincidence_51 = Sketch_2.setCoincident(SketchLine_32.result(), SketchArc_4.startPoint())
181 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", (2.761819470681477, 0, 6.519565749310471)), False)
182 SketchLine_33 = SketchProjection_5.createdFeature()
183 SketchConstraintCoincidence_52 = Sketch_2.setCoincident(SketchArc_4.endPoint(), SketchLine_33.result())
184 SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchArc_4.startPoint(), SketchLine_32.result())
185 SketchLine_34 = Sketch_2.addLine(0, 2.425, 3.282538500974084, 11.74164236673399)
186 SketchLine_34.setAuxiliary(True)
187 SketchConstraintCoincidence_53 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_34.startPoint())
188 SketchLine_35 = Sketch_2.addLine(3.282538500974084, 11.74164236673399, 3.199461499025965, 11.50584963625379)
189 SketchConstraintCoincidence_54 = Sketch_2.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint())
190 SketchConstraintCoincidence_55 = Sketch_2.setCoincident(SketchLine_35.endPoint(), SketchLine_34.result())
191 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_35.result(), 0.25)
192 SketchPoint_2 = Sketch_2.addPoint(3.241, 11.6237460014939)
193 SketchConstraintCoincidence_56 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchArc_4.results()[1])
194 SketchConstraintCoincidence_57 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_35.result())
195 SketchProjection_6 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
196 SketchLine_36 = SketchProjection_6.createdFeature()
197 SketchConstraintDistance_17 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_36.result(), 3.241, True)
198 SketchArc_5 = Sketch_2.addArc(0, 2.425, 3.282538500974084, 11.74164236673399, 4.1398177019328, 11.393656164374, True)
199 SketchConstraintCoincidence_58 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchArc_5.center())
200 SketchConstraintCoincidence_59 = Sketch_2.setCoincident(SketchLine_34.endPoint(), SketchArc_5.startPoint())
201 SketchArc_6 = Sketch_2.addArc(0, 2.425, 3.199461499025965, 11.50584963625379, 4.035044020470642, 11.16667053559353, True)
202 SketchConstraintCoincidence_60 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_33).startPoint(), SketchArc_6.center())
203 SketchConstraintCoincidence_61 = Sketch_2.setCoincident(SketchLine_35.endPoint(), SketchArc_6.startPoint())
204 SketchLine_37 = Sketch_2.addLine(0, 2.425, 3.911506014428326, 11.49555702253677)
205 SketchLine_37.setAuxiliary(True)
206 SketchConstraintCoincidence_62 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_37.startPoint())
207 SketchConstraintCoincidence_63 = Sketch_2.setCoincident(SketchLine_37.endPoint(), SketchArc_5.results()[1])
208 SketchLine_38 = Sketch_2.addLine(0, 2.425, 4.1398177019328, 11.393656164374)
209 SketchLine_38.setAuxiliary(True)
210 SketchConstraintCoincidence_64 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_38.startPoint())
211 SketchConstraintCoincidence_65 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_38.endPoint())
212 SketchConstraintCoincidence_66 = Sketch_2.setCoincident(SketchArc_6.endPoint(), SketchLine_38.result())
213 SketchConstraintDistance_18 = Sketch_2.setDistance(SketchLine_35.startPoint(), SketchLine_37.result(), 0.675, True)
214 SketchConstraintMiddle_4 = Sketch_2.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_35.result())
215 SketchLine_39 = Sketch_2.addLine(3.911506014428326, 11.49555702253677, 3.81251062025875, 11.26599240868435)
216 SketchConstraintCoincidence_67 = Sketch_2.setCoincident(SketchLine_37.endPoint(), SketchLine_39.startPoint())
217 SketchConstraintCoincidence_68 = Sketch_2.setCoincident(SketchLine_39.endPoint(), SketchArc_6.results()[1])
218 SketchConstraintCoincidence_69 = Sketch_2.setCoincident(SketchLine_39.endPoint(), SketchLine_37.result())
219 SketchLine_40 = Sketch_2.addLine(4.1398177019328, 11.393656164374, 4.459277785066647, 11.19096067956113)
220 SketchConstraintCoincidence_70 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_40.startPoint())
221 SketchProjection_7 = Sketch_2.addProjection(model.selection("EDGE_3", (2.545485308583308, 0, 11.92488050155302)), False)
222 SketchArc_7 = SketchProjection_7.createdFeature()
223 SketchConstraintCoincidence_71 = Sketch_2.setCoincident(SketchLine_40.endPoint(), SketchArc_7.results()[1])
224 SketchLine_41 = Sketch_2.addLine(4.459277785066647, 11.19096067956113, 4.390495384356095, 11.04194790978503)
225 SketchConstraintCoincidence_72 = Sketch_2.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
226 SketchProjection_8 = Sketch_2.addProjection(model.selection("EDGE_3", (2.503038985186497, 0, 11.76646866604162)), False)
227 SketchArc_8 = SketchProjection_8.createdFeature()
228 SketchConstraintCoincidence_73 = Sketch_2.setCoincident(SketchLine_41.endPoint(), SketchArc_8.results()[1])
229 SketchLine_42 = Sketch_2.addLine(4.390495384356095, 11.04194790978503, 4.035044020470642, 11.16667053559353)
230 SketchConstraintCoincidence_74 = Sketch_2.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
231 SketchConstraintCoincidence_75 = Sketch_2.setCoincident(SketchLine_42.endPoint(), SketchLine_38.result())
232 SketchConstraintCoincidence_76 = Sketch_2.setCoincident(SketchLine_42.endPoint(), SketchArc_6.endPoint())
233 SketchConstraintDistance_19 = Sketch_2.setDistance(SketchArc_5.endPoint(), SketchLine_41.result(), 0.375, True)
234 SketchConstraintDistance_20 = Sketch_2.setDistance(SketchLine_39.startPoint(), SketchLine_38.result(), 0.25, True)
235 SketchConstraintParallel_1 = Sketch_2.setParallel(SketchLine_41.result(), SketchLine_38.result())
237 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (3.862008317343538, 0, 11.38077471561056))], model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389)), 360, 0)
238 Revolution_3 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (4.212769702413368, 0, 11.10430922268928))], model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389)), 360, 0)
239 Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", (3.237566604725065, 0, 11.61400119092393)), model.selection("SOLID", (3.223802337712571, 0, 11.57493485456337))], model.selection("FACE", "PartSet/YOZ"), True)
240 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", (-0.02393444277354109, 0, -2.580701826672493))], [model.selection("COMPOUND", (0, 0, 11.60508262087049))])
241 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", (-0.0201067396659898, 0, -2.591493279115657)), model.selection("COMPOUND", (0, 0, 11.54608275997197))], removeEdges = True)
242 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 3.6, False)
243 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", (0, 0, 3.6)))
244 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", (-6.188, 7.578114393123822e-16, -3.45)), True)
245 SketchCircle_1 = SketchProjection_9.createdFeature()
246 SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", (-6.376, 7.808347991363525e-16, -2.25)), True)
247 SketchCircle_2 = SketchProjection_10.createdFeature()
248 SketchArc_9 = Sketch_3.addArc(0, 0, 6.094, 0, 5.859569950090201, -1.674, True)
249 SketchConstraintCoincidence_77 = Sketch_3.setCoincident(SketchAPI_Circle(SketchCircle_1).center(), SketchArc_9.center())
250 SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
251 SketchLine_43 = SketchProjection_11.createdFeature()
252 SketchConstraintCoincidence_78 = Sketch_3.setCoincident(SketchArc_9.startPoint(), SketchLine_43.result())
253 SketchPoint_3 = Sketch_3.addPoint(6.188, 0)
254 SketchConstraintCoincidence_79 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_43.result())
255 SketchConstraintCoincidence_80 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchCircle_1.results()[1])
256 SketchConstraintDistance_21 = Sketch_3.setDistance(SketchArc_9.startPoint(), SketchPoint_3.coordinates(), 0.094, True)
257 SketchConstraintDistance_22 = Sketch_3.setDistance(SketchArc_9.endPoint(), SketchLine_43.result(), 1.674, True)
258 SketchLine_44 = Sketch_3.addLine(5.859569950090201, -1.674, 5.870724657144867, -1.956)
259 SketchConstraintCoincidence_81 = Sketch_3.setCoincident(SketchArc_9.endPoint(), SketchLine_44.startPoint())
260 SketchConstraintCoincidence_82 = Sketch_3.setCoincident(SketchLine_44.endPoint(), SketchCircle_1.results()[1])
261 SketchArc_10 = Sketch_3.addArc(0, 0, 6.47, 0, 6.167249305809295, -1.956, True)
262 SketchConstraintCoincidence_83 = Sketch_3.setCoincident(SketchAPI_Circle(SketchCircle_1).center(), SketchArc_10.center())
263 SketchConstraintCoincidence_84 = Sketch_3.setCoincident(SketchLine_43.result(), SketchArc_10.startPoint())
264 SketchLine_45 = Sketch_3.addLine(6.167249305809295, -1.956, 6.068561608816571, -1.956)
265 SketchConstraintCoincidence_85 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_45.startPoint())
266 SketchConstraintCoincidence_86 = Sketch_3.setCoincident(SketchLine_45.endPoint(), SketchCircle_2.results()[1])
267 SketchConstraintHorizontal_8 = Sketch_3.setHorizontal(SketchLine_45.result())
268 SketchConstraintCoincidence_87 = Sketch_3.setCoincident(SketchLine_44.endPoint(), SketchLine_45.result())
269 SketchConstraintDistance_23 = Sketch_3.setDistance(SketchArc_10.startPoint(), SketchLine_45.result(), 1.956, True)
270 SketchPoint_4 = Sketch_3.addPoint(6.376, 0)
271 SketchConstraintCoincidence_88 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchCircle_2.results()[1])
272 SketchConstraintCoincidence_89 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_43.result())
273 SketchConstraintDistance_24 = Sketch_3.setDistance(SketchPoint_4.coordinates(), SketchArc_10.startPoint(), 0.094, True)
274 SketchConstraintMirror_1_objects = [SketchArc_9.results()[1], SketchLine_44.result(), SketchArc_10.results()[1], SketchLine_45.result()]
275 SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_43.result(), SketchConstraintMirror_1_objects)
276 [SketchArc_11, SketchLine_46, SketchArc_12, SketchLine_47] = SketchConstraintMirror_1.mirrored()
278 Sketch_3.changeFacesOrder([[SketchProjection_9.result(), SketchProjection_9.result(), SketchLine_46.result(), SketchArc_11.results()[1], SketchArc_9.results()[1], SketchLine_44.result()],
279 [SketchProjection_10.result(), SketchProjection_10.result(), SketchProjection_10.result(), SketchProjection_9.result(), SketchProjection_9.result(), SketchProjection_9.result()],
280 [SketchProjection_9.result(), SketchLine_44.result(), SketchArc_9.results()[1], SketchArc_11.results()[1], SketchLine_46.result()],
281 [SketchProjection_10.result(), SketchLine_45.result(), SketchArc_10.results()[1], SketchArc_12.results()[1], SketchLine_47.result(), SketchProjection_10.result()]
284 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", (6.023784975045098, 0, 3.6)), model.selection("WIRE", (6.393864363926704, 0.9896456414839456, 3.6))], model.selection(), 0, 4.2)
285 Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
286 SketchLine_48 = Sketch_4.addLine(0.75, 2.1, -0.75, 2.1)
287 SketchLine_49 = Sketch_4.addLine(-0.75, 2.1, -0.75, 0.3)
288 SketchLine_50 = Sketch_4.addLine(-0.75, 0.3, 0.75, 0.3)
289 SketchLine_51 = Sketch_4.addLine(0.75, 0.3, 0.75, 2.1)
290 SketchConstraintCoincidence_90 = Sketch_4.setCoincident(SketchLine_51.endPoint(), SketchLine_48.startPoint())
291 SketchConstraintCoincidence_91 = Sketch_4.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
292 SketchConstraintCoincidence_92 = Sketch_4.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
293 SketchConstraintCoincidence_93 = Sketch_4.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
294 SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_48.result())
295 SketchConstraintVertical_11 = Sketch_4.setVertical(SketchLine_49.result())
296 SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_50.result())
297 SketchConstraintVertical_12 = Sketch_4.setVertical(SketchLine_51.result())
298 SketchProjection_12 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"), False)
299 SketchLine_52 = SketchProjection_12.createdFeature()
300 SketchConstraintDistance_25 = Sketch_4.setDistance(SketchLine_52.result(), SketchLine_50.endPoint(), 0.3, True)
301 SketchConstraintDistance_26 = Sketch_4.setDistance(SketchLine_51.endPoint(), SketchLine_52.result(), 2.1, True)
302 SketchPoint_5 = Sketch_4.addPoint(0, 2.1)
303 SketchConstraintCoincidence_94 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_48.result())
304 SketchConstraintMiddle_5 = Sketch_4.setMiddlePoint(SketchLine_48.result(), SketchPoint_5.coordinates())
305 SketchProjection_13 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
306 SketchLine_53 = SketchProjection_13.createdFeature()
307 SketchConstraintCoincidence_95 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_53.result())
308 SketchConstraintDistance_27 = Sketch_4.setDistance(SketchPoint_5.coordinates(), SketchLine_51.endPoint(), 0.75, True)
310 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", (0, 0, 1.2))], model.selection(), 10, 0)
311 Rotation_1_objects = [model.selection("SOLID", (5, 1.166200656118862e-18, 1.2)), model.selection("SOLID", (6.049686362669476, 0, 1.5)), model.selection("SOLID", (6.320976310013338, 0, 1.5))]
312 Rotation_1 = model.addRotation(Part_1_doc, Rotation_1_objects, model.selection("EDGE", "PartSet/OZ"), -90)
313 Fuse_2_objects_1 = [model.selection("SOLID", (-0.01517504751345233, 0, -2.581926283264175)), model.selection("SOLID", (0, -6.049686362669479, 1.5)), model.selection("SOLID", (0, -6.320976310013339, 1.5))]
314 Fuse_2 = model.addFuse(Part_1_doc, Fuse_2_objects_1)
315 Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", (-0.01017608298903453, -0.03890028204629473, -2.562040714294322))], [model.selection("SOLID", (0, -5, 1.2))])
316 FusionFaces_1 = model.addFusionFaces(Part_1_doc, model.selection("SOLID", (-0.008741742572144908, -0.03112823644757425, -2.568357186681257)))
320 model.testNbResults(FusionFaces_1, 1)
321 model.testNbSubResults(FusionFaces_1, [0])
322 model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.SOLID, [1])
323 model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.FACE, [47])
324 model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.EDGE, [202])
325 model.testNbSubShapes(FusionFaces_1, GeomAPI_Shape.VERTEX, [404])
326 model.testResultsVolumes(FusionFaces_1, [612.7268292882])
328 assert(model.checkPythonDump())
