src/FeaturesPlugin/Test/Test2689.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 model.addParameter(partSet, "hh", "20")
  25 Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
  26 SketchLine_1 = Sketch_1.addLine(-14.44396674123619, 36.663, -34.44396674123619, 36.663)
  27 SketchLine_2 = Sketch_1.addLine(-34.44396674123619, 36.663, -34.44396674123619, 14.29964516129033)
  28 SketchLine_3 = Sketch_1.addLine(-34.44396674123619, 14.29964516129033, -14.44396674123619, 14.29964516129033)
  29 SketchLine_4 = Sketch_1.addLine(-14.44396674123619, 14.29964516129033, -14.44396674123619, 36.663)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  31 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  32 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  33 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  34 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  35 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  36 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  37 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  38 SketchLine_5 = Sketch_1.addLine(34.94274193548387, 39.45841935483872, 18.60029032258063, 39.45841935483872)
  39 SketchLine_6 = Sketch_1.addLine(18.60029032258063, 39.45841935483872, 18.60029032258063, 13.00945161290323)
  40 SketchLine_7 = Sketch_1.addLine(18.60029032258063, 13.00945161290323, 34.94274193548387, 13.00945161290323)
  41 SketchLine_8 = Sketch_1.addLine(34.94274193548387, 13.00945161290323, 34.94274193548387, 39.45841935483872)
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  43 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  45 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  46 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  47 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  48 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  49 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  50 SketchLine_9 = Sketch_1.addLine(-7.633645161290328, -5.05325806451613, -33.00745161290323, -5.05325806451613)
  51 SketchLine_10 = Sketch_1.addLine(-33.00745161290323, -5.05325806451613, -33.00745161290323, -31.71725806451613)
  52 SketchLine_11 = Sketch_1.addLine(-33.00745161290323, -31.71725806451613, -7.633645161290328, -31.71725806451613)
  53 SketchLine_12 = Sketch_1.addLine(-7.633645161290328, -31.71725806451613, -7.633645161290328, -5.05325806451613)
  54 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
  55 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  56 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  57 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  58 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_9.result())
  59 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_10.result())
  60 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_11.result())
  61 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
  62 SketchLine_13 = Sketch_1.addLine(36.44796774193549, -7.848677419354839, 19.46041935483872, -7.848677419354839)
  63 SketchLine_14 = Sketch_1.addLine(19.46041935483872, -7.848677419354839, 19.46041935483872, -34.29764516129033)
  64 SketchLine_15 = Sketch_1.addLine(19.46041935483872, -34.29764516129033, 36.44796774193549, -34.29764516129033)
  65 SketchLine_16 = Sketch_1.addLine(36.44796774193549, -34.29764516129033, 36.44796774193549, -7.848677419354839)
  66 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
  67 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  68 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  69 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  70 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_13.result())
  71 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_14.result())
  72 SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_15.result())
  73 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_16.result())
  74 SketchCircle_1 = Sketch_1.addCircle(-24.6211935483871, 23.331, 4.515677419354841)
  75 SketchCircle_2 = Sketch_1.addCircle(27.20158064516131, 20.96564516129033, 4.091267733479863)
  76 SketchCircle_3 = Sketch_1.addCircle(-16.23493548387097, -18.60029032258065, 7.50151366286372)
  77 SketchCircle_4 = Sketch_1.addCircle(27.84667741935485, -22.90093548387097, 5.414373911476542)
  78 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "hh")
  79 model.do()
  80 Part_1 = model.addPart(partSet)
  81 Part_1_doc = Part_1.document()
  82 model.addParameter(Part_1_doc, "hh", "15")
  83 model.addParameter(Part_1_doc, "hh_1", "26")
  84 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchCircle_1_2r")], model.selection(), "hh", 0)
  85 Extrusion_2_objects = [model.selection("WIRE", "PartSet/Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchCircle_1_2r_wire"), model.selection("FACE", "PartSet/Sketch_1/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchCircle_2_2r"), model.selection("FACE", "PartSet/Sketch_1/Face-SketchLine_13f-SketchLine_14f-SketchLine_15f-SketchLine_16f-SketchCircle_4_2r"), model.selection("FACE", "PartSet/Sketch_1/Face-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchCircle_3_2r")]
  86 Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, "hh_1")
  87 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_4"), model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OX"), 40)
  88 Fuse_1_objects_1 = [model.selection("SOLID", "Translation_1_2"), model.selection("SOLID", "Translation_1_1"), model.selection("SOLID", "Extrusion_2_1")]
  89 Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1)
  90 Translation_2 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_3")], model.selection("EDGE", "PartSet/OX"), 30)
  91 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_2_2"), model.selection("SOLID", "Translation_2_1")])
  92 model.do()
  93 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  94 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  95 model.end()
  96
  97 assert(model.checkPythonDump())