SalomeKERNELConfig.cmake.in

   1 # - Config file for the @PROJECT_NAME@ package
   2 # It defines the following variables.
   3 # Specific to the package @PROJECT_NAME@ itself:
   4 #  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
   5 #
   6 # Other stuff specific to this package:
   7 #  SALOME_USE_MPI            - ON if KERNEL is built with MPI support
   8 #  SALOME_KERNEL_BUILD_DOC   - ON if documentation for KERNEL module has been built
   9 #  SALOME_KERNEL_BUILD_TESTS - ON if tests for KERNEL module has been built
  10 #  SALOME_KERNEL_LIGHT_ONLY  - ON if SALOME is built in Light mode (no CORBA)
  11
  12 ###############################################################
  13 # Copyright (C) 2007-2022  CEA/DEN, EDF R&D, OPEN CASCADE
  14 #
  15 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
  16 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
  17 #
  18 # This library is free software; you can redistribute it and/or
  19 # modify it under the terms of the GNU Lesser General Public
  20 # License as published by the Free Software Foundation; either
  21 # version 2.1 of the License, or (at your option) any later version.
  22 #
  23 # This library is distributed in the hope that it will be useful,
  24 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  25 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  26 # Lesser General Public License for more details.
  27 #
  28 # You should have received a copy of the GNU Lesser General Public
  29 # License along with this library; if not, write to the Free Software
  30 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  31 #
  32 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  33 #
  34
  35 ### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
  36 @PACKAGE_INIT@
  37
  38 # Load the dependencies for the libraries of @PROJECT_NAME@
  39 # (contains definitions for IMPORTED targets). This is only
  40 # imported if we are not built as a subproject (in this case targets are already there)
  41 IF(NOT TARGET SALOMEBasics AND NOT @PROJECT_NAME@_BINARY_DIR)
  42   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE@/@PROJECT_NAME@Targets.cmake")
  43 ENDIF()
  44
  45 # Package root dir:
  46 SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
  47
  48 # Include directories and definitions
  49 SET_AND_CHECK(KERNEL_INCLUDE_DIRS "${KERNEL_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
  50 SET(KERNEL_INCLUDE_DIRS "${KERNEL_INCLUDE_DIRS};@_SalomeKERNEL_EXTRA_HEADERS@")
  51 SET(KERNEL_DEFINITIONS)
  52
  53 # Package specific environment variables
  54 @_SalomeKERNEL_EXTRA_ENV_FULL@
  55
  56 #### Now the specificities
  57
  58 # Options exported by the package:
  59 SET(SALOME_USE_MPI     @SALOME_USE_MPI@)
  60 IF(SALOME_USE_MPI)
  61   LIST(APPEND KERNEL_INCLUDE_DIRS "@MPI_INCLUDE_DIRS@")
  62   LIST(APPEND KERNEL_DEFINITIONS "@MPI_DEFINITIONS@")
  63 ENDIF()
  64
  65 SET(SALOME_KERNEL_BUILD_DOC   @SALOME_BUILD_DOC@)
  66 SET(SALOME_KERNEL_BUILD_TESTS @SALOME_BUILD_TESTS@)
  67 SET(SALOME_KERNEL_LIGHT_ONLY  @SALOME_LIGHT_ONLY@)
  68 SET(SALOME_USE_LIBBATCH       @SALOME_USE_LIBBATCH@)
  69 SET(SALOME_USE_64BIT_IDS      @SALOME_USE_64BIT_IDS@)
  70
  71 IF(SALOME_KERNEL_LIGHT_ONLY)
  72   ADD_DEFINITIONS(-DSALOME_LIGHT)
  73 ENDIF()
  74
  75 # Prerequisites:
  76 IF(SALOME_KERNEL_BUILD_TESTS)
  77   SET_AND_CHECK(CPPUNIT_ROOT_DIR_EXP  "@PACKAGE_CPPUNIT_ROOT_DIR@")
  78 ENDIF()
  79 IF(SALOME_KERNEL_BUILD_DOC)
  80   SET_AND_CHECK(GRAPHVIZ_ROOT_DIR_EXP "@PACKAGE_GRAPHVIZ_ROOT_DIR@")
  81   SET_AND_CHECK(DOXYGEN_ROOT_DIR_EXP  "@PACKAGE_DOXYGEN_ROOT_DIR@")
  82   SET_AND_CHECK(SPHINX_ROOT_DIR_EXP   "@PACKAGE_SPHINX_ROOT_DIR@")
  83 ENDIF()
  84 IF(SALOME_USE_MPI)
  85   SET_AND_CHECK(MPI_ROOT_DIR_EXP      "@PACKAGE_MPI_ROOT_DIR@")
  86 ENDIF()
  87 IF(NOT SALOME_KERNEL_LIGHT_ONLY)
  88   SET_AND_CHECK(OMNIORB_ROOT_DIR_EXP  "@PACKAGE_OMNIORB_ROOT_DIR@")
  89   SET_AND_CHECK(OMNIORBPY_ROOT_DIR_EXP "@PACKAGE_OMNIORBPY_ROOT_DIR@")
  90 ENDIF()
  91 IF(SALOME_USE_LIBBATCH)
  92   SET_AND_CHECK(LIBBATCH_ROOT_DIR_EXP "@PACKAGE_LIBBATCH_ROOT_DIR@")
  93 ENDIF()
  94
  95 SET_AND_CHECK(PTHREAD_ROOT_DIR_EXP  "@PACKAGE_PTHREAD_ROOT_DIR@")
  96 SET_AND_CHECK(HDF5_ROOT_DIR_EXP     "@PACKAGE_HDF5_ROOT_DIR@")
  97 SET_AND_CHECK(LIBXML2_ROOT_DIR_EXP  "@PACKAGE_LIBXML2_ROOT_DIR@")
  98 SET_AND_CHECK(PYTHON_ROOT_DIR_EXP   "@PACKAGE_PYTHON_ROOT_DIR@")
  99 SET_AND_CHECK(SWIG_ROOT_DIR_EXP     "@PACKAGE_SWIG_ROOT_DIR@")
 100
 101 # For all prerequisites, load the corresponding targets if the package was used
 102 # in CONFIG mode. This ensures dependent projects link correctly
 103 # without having to set LD_LIBRARY_PATH:
 104 unset(Boost_USE_DEBUG_RUNTIME) # problem detected in 9.9.0 with persalys. After a first find_package (Boost) FIND_PACKAGE 15 lines under failed
 105 SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
 106 SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
 107 SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
 108 LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
 109 IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
 110   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
 111   MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
 112   FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
 113     LIST(GET _PREREQ_@PROJECT_NAME@            ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@    )
 114     LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
 115     LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
 116     IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
 117       MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
 118       IF(NOT _pkg_compo_@PROJECT_NAME@)
 119         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
 120             PATHS "${_pkg_dir_@PROJECT_NAME@}"
 121             NO_DEFAULT_PATH)
 122       ELSE()
 123         STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
 124         MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
 125         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
 126             COMPONENTS ${_compo_lst_@PROJECT_NAME@}
 127             PATHS "${_pkg_dir_@PROJECT_NAME@}"
 128             NO_DEFAULT_PATH)
 129       ENDIF()
 130     ENDIF()
 131   ENDFOREACH()
 132 ENDIF()
 133
 134 # Installation directories
 135 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
 136 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
 137 SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
 138 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
 139 SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
 140 SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
 141 SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
 142 SET(SALOME_INSTALL_APPLISKEL_SCRIPTS "@SALOME_INSTALL_APPLISKEL_SCRIPTS@")
 143 SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
 144 SET(SALOME_INSTALL_CMAKE "@SALOME_INSTALL_CMAKE@")
 145 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
 146 SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
 147 SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
 148 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 149 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
 150 SET(SALOME_INSTALL_AMCONFIG "@SALOME_INSTALL_AMCONFIG@") # to be removed
 151 SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@") # to be removed
 152
 153 # Exposed targets:
 154 SET(KERNEL_CalciumC CalciumC)
 155 SET(KERNEL_DF DF)
 156 SET(KERNEL_Launcher Launcher)
 157 SET(KERNEL_LifeCycleCORBATest LifeCycleCORBATest)
 158 SET(KERNEL_NamingServiceTest NamingServiceTest)
 159 SET(KERNEL_OpUtil OpUtil)
 160 SET(KERNEL_Registry Registry)
 161 SET(KERNEL_ResourcesManager ResourcesManager)
 162 SET(KERNEL_SALOMELog SALOMELog)
 163 SET(KERNEL_SALOMEBasics SALOMEBasics)
 164 SET(KERNEL_SalomeCatalog SalomeCatalog)
 165 SET(KERNEL_SalomeCommunication SalomeCommunication)
 166 SET(KERNEL_SalomeContainer SalomeContainer)
 167 SET(KERNEL_SalomeSDS SalomeSDS)
 168 SET(KERNEL_SalomeDatastream SalomeDatastream)
 169 SET(KERNEL_SalomeDSCContainer SalomeDSCContainer)
 170 SET(KERNEL_SalomeDSClient SalomeDSClient)
 171 SET(KERNEL_SalomeDSCSupervBasic SalomeDSCSupervBasic)
 172 SET(KERNEL_SalomeDSCSuperv SalomeDSCSuperv)
 173 SET(KERNEL_SalomeDSImpl SalomeDSImpl)
 174 SET(KERNEL_SALOMEDSImplTest SALOMEDSImplTest)
 175 SET(KERNEL_SalomeDS SalomeDS)
 176 SET(KERNEL_SALOMEDSTest SALOMEDSTest)
 177 SET(KERNEL_SalomeGenericObj SalomeGenericObj)
 178 SET(KERNEL_SalomeHDFPersist SalomeHDFPersist)
 179 SET(KERNEL_SalomeIDLKernel SalomeIDLKernel)
 180 SET(KERNEL_SalomeLauncher SalomeLauncher)
 181 SET(KERNEL_SalomeLifeCycleCORBA SalomeLifeCycleCORBA)
 182 SET(KERNEL_SALOMELocalTrace SALOMELocalTrace)
 183 SET(KERNEL_SALOMELocalTraceTest SALOMELocalTraceTest)
 184 SET(KERNEL_SalomeLoggerServer SalomeLoggerServer)
 185 SET(KERNEL_SalomeMPIContainer SalomeMPIContainer)
 186 SET(KERNEL_SalomeNotification SalomeNotification)
 187 SET(KERNEL_SalomeNS SalomeNS)
 188 SET(KERNEL_SalomeResourcesManager SalomeResourcesManager)
 189 SET(KERNEL_SalomeTestComponentEngine SalomeTestComponentEngine)
 190 SET(KERNEL_SalomeTestMPIComponentEngine SalomeTestMPIComponentEngine)
 191 SET(KERNEL_SALOMETraceCollectorTest SALOMETraceCollectorTest)
 192 SET(KERNEL_TOOLSDS TOOLSDS)
 193 SET(KERNEL_UtilsTest UtilsTest)
 194 SET(KERNEL_with_loggerTraceCollector with_loggerTraceCollector)
 195 SET(KERNEL_SalomeKernelHelpers SalomeKernelHelpers)
 196 SET(KERNEL_SalomeORB SalomeORB)