SalomeHYDROSOLVERConfig.cmake.in

   1 # - Config file for the @PROJECT_NAME@ package
   2 # It defines the following variables.
   3 # Specific to the package @PROJECT_NAME@ itself:
   4 #  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
   5 #
   6
   7 ###############################################################
   8 #  Copyright (C) 2012-2013 EDF
   9 #
  10 #  This file is part of SALOME HYDRO module.
  11 #
  12 #  SALOME HYDRO module is free software: you can redistribute it and/or modify
  13 #  it under the terms of the GNU General Public License as published by
  14 #  the Free Software Foundation, either version 3 of the License, or
  15 #  (at your option) any later version.
  16 #
  17 #  SALOME HYDRO module is distributed in the hope that it will be useful,
  18 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
  19 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20 #  GNU General Public License for more details.
  21 #
  22 #  You should have received a copy of the GNU General Public License
  23 #  along with SALOME HYDRO module.  If not, see <http://www.gnu.org/licenses/>.
  24 ###############################################################
  25
  26 ### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
  27 @PACKAGE_INIT@
  28
  29 # Load the dependencies for the libraries of @PROJECT_NAME@
  30 # (contains definitions for IMPORTED targets). This is only
  31 # imported if we are not built as a subproject (in this case targets are already there)
  32 IF(NOT TARGET SalomeIDLHYDROSOLVER AND NOT @PROJECT_NAME@_BINARY_DIR)
  33   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
  34 ENDIF()
  35
  36 # Package root dir:
  37 SET_AND_CHECK(HYDROSOLVER_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
  38
  39 # Include directories
  40 SET_AND_CHECK(HYDROSOLVER_INCLUDE_DIRS "${HYDROSOLVER_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
  41 SET(HYDROSOLVER_INCLUDE_DIRS "${HYDROSOLVER_INCLUDE_DIRS};@_SalomeHYDROSOLVER_EXTRA_HEADERS@")
  42 SET(HYDROSOLVER_DEFINITIONS "@GUI_DEFINITIONS@")
  43
  44 # Package specific environment variables
  45 @_SalomeHYDROSOLVER_EXTRA_ENV_FULL@
  46
  47 #### Now the specificities
  48
  49 # Options exported by the package:
  50 SET(SALOME_HYDROSOLVER_BUILD_DOC   @SALOME_BUILD_DOC@)
  51 #SET(SALOME_HYDROSOLVER_BUILD_TESTS @SALOME_BUILD_TESTS@)
  52 SET(SALOME_LIGHT_ONLY  @SALOME_LIGHT_ONLY@)
  53
  54 # Level 1 prerequisites:
  55 SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
  56
  57 # For all prerequisites, load the corresponding targets if the package was used
  58 # in CONFIG mode. This ensures dependent projects link correctly
  59 # without having to set LD_LIBRARY_PATH:
  60 SET(_PREREQ @_PREREQ_LIST@)
  61 SET(_PREREQ_CONFIG_DIR @_PREREQ_DIR_LIST@)
  62 SET(_PREREQ_COMPONENTS "@_PREREQ_COMPO_LIST@")
  63 LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
  64 IF(NOT _list_len EQUAL 0)
  65   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
  66   MATH(EXPR _range "${_list_len}-1")
  67   FOREACH(_p RANGE ${_range})
  68     LIST(GET _PREREQ            ${_p} _pkg    )
  69     LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
  70     LIST(GET _PREREQ_COMPONENTS ${_p} _pkg_compo)
  71     MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
  72     IF(NOT _pkg_compo)
  73       FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
  74           PATHS "${_pkg_dir}"
  75           NO_DEFAULT_PATH)
  76     ELSE()
  77       STRING(REPLACE "," ";" _compo_lst "${_pkg_compo}")
  78       MESSAGE(STATUS "===> (components: ${_pkg_compo})")
  79       FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
  80           COMPONENTS ${_compo_lst}
  81           PATHS "${_pkg_dir}"
  82           NO_DEFAULT_PATH)
  83     ENDIF()
  84   ENDFOREACH()
  85 ENDIF()
  86
  87 # Installation directories
  88 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
  89 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
  90 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
  91 SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
  92 SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
  93 SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
  94 SET(SALOME_INSTALL_APPLISKEL_SCRIPTS "@SALOME_INSTALL_APPLISKEL_SCRIPTS@")
  95 SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
  96 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
  97 SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
  98 SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
  99 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 100 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
 101 SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
 102
 103 # Include GUI targets if they were not already loaded:
 104 IF(NOT (TARGET Event))
 105   INCLUDE("${GUI_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE_LOCAL}/SalomeGUITargets.cmake")
 106 ENDIF()
 107
 108 # Exposed HYDROSOLVER targets:
 109 SET(HYDROSOLVER_SalomeIDLHYDROSOLVER SalomeIDLHYDROSOLVER)