SalomeGUIConfig.cmake.in

   1 # Copyright (C) 2013-2021  CEA/DEN, EDF R&D, OPEN CASCADE
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # - Config file for the @PROJECT_NAME@ package
  21 # It defines the following variables.
  22 # Specific to the pacakge @PROJECT_NAME@ itself:
  23 #  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
  24 #
  25
  26 ### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
  27 @PACKAGE_INIT@
  28
  29 # Load the dependencies for the libraries of @PROJECT_NAME@
  30 # (contains definitions for IMPORTED targets). This is only
  31 # imported if we are not built as a subproject (in this case targets are already there)
  32 IF(NOT TARGET Event AND NOT @PROJECT_NAME@_BINARY_DIR)
  33   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
  34 ENDIF()
  35
  36 # Package root dir:
  37 SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
  38
  39 # Include directories
  40 SET_AND_CHECK(GUI_INCLUDE_DIRS "${GUI_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
  41 SET(GUI_INCLUDE_DIRS "${GUI_INCLUDE_DIRS};@_SalomeGUI_EXTRA_HEADERS@")
  42 SET(GUI_DEFINITIONS "@KERNEL_DEFINITIONS@")
  43
  44 # Package specific environment variables
  45 @_SalomeGUI_EXTRA_ENV_FULL@
  46
  47 #### Now the specificities
  48
  49 # Options exported by the package:
  50 SET(SALOME_GUI_BUILD_DOC      @SALOME_BUILD_DOC@)
  51 SET(SALOME_GUI_BUILD_TESTS    @SALOME_BUILD_TESTS@)
  52 SET(SALOME_GUI_LIGHT_ONLY     @SALOME_LIGHT_ONLY@)
  53
  54 # Advanced options
  55 SET(SALOME_USE_OCCVIEWER      @SALOME_USE_OCCVIEWER@)
  56 SET(SALOME_USE_GLVIEWER       @SALOME_USE_GLVIEWER@)
  57 SET(SALOME_USE_VTKVIEWER      @SALOME_USE_VTKVIEWER@)
  58 SET(SALOME_USE_PLOT2DVIEWER   @SALOME_USE_PLOT2DVIEWER@)
  59 SET(SALOME_USE_GRAPHICSVIEW   @SALOME_USE_GRAPHICSVIEW@)
  60 SET(SALOME_USE_QXGRAPHVIEWER  @SALOME_USE_QXGRAPHVIEWER@)
  61 SET(SALOME_USE_PVVIEWER       @SALOME_USE_PVVIEWER@)
  62 SET(SALOME_USE_PYVIEWER       @SALOME_USE_PYVIEWER@)
  63 SET(SALOME_USE_PYCONSOLE      @SALOME_USE_PYCONSOLE@)
  64 SET(SALOME_USE_SALOMEOBJECT   @SALOME_USE_SALOMEOBJECT@)
  65 SET(SALOME_GUI_USE_OBSERVERS  @SALOME_GUI_USE_OBSERVERS@)
  66 SET(SALOME_GUI_USE_OPENGL2    @SALOME_GUI_USE_OPENGL2@)
  67
  68 IF(SALOME_GUI_LIGHT_ONLY)
  69   LIST(APPEND GUI_DEFINITIONS "-DGUI_DISABLE_CORBA")
  70 ENDIF()
  71 IF(SALOME_GUI_USE_OBSERVERS)
  72   LIST(APPEND GUI_DEFINITIONS "-DWITH_SALOMEDS_OBSERVER")
  73 ENDIF()
  74 IF(NOT SALOME_USE_OCCVIEWER)
  75   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_OCCVIEWER")
  76 ENDIF()
  77 IF(NOT SALOME_USE_GLVIEWER)
  78   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_GLVIEWER")
  79 ENDIF()
  80
  81 IF(NOT SALOME_USE_VTKVIEWER)
  82   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_VTKVIEWER")
  83 ELSE()
  84   IF(SALOME_GUI_USE_OPENGL2)
  85     LIST(APPEND GUI_DEFINITIONS "-DVTK_OPENGL2")
  86   ENDIF()
  87 ENDIF()
  88 IF(NOT SALOME_USE_PLOT2DVIEWER)
  89   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_PLOT2DVIEWER")
  90 ENDIF()
  91 IF (NOT SALOME_USE_GRAPHICSVIEW)
  92   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_GRAPHICSVIEW")
  93 ENDIF()
  94 IF (NOT SALOME_USE_PVVIEWER)
  95   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_PVVIEWER")
  96 ENDIF()
  97 IF(NOT SALOME_USE_PYVIEWER)
  98   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_PYVIEWER")
  99 ENDIF()
 100 IF(NOT SALOME_USE_PYCONSOLE)
 101   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_PYCONSOLE")
 102 ENDIF()
 103 IF(NOT SALOME_USE_QXGRAPHVIEWER)
 104   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_QXGRAPHVIEWER")
 105 ENDIF()
 106 IF(NOT SALOME_USE_SALOMEOBJECT)
 107   LIST(APPEND GUI_DEFINITIONS "-DDISABLE_SALOMEOBJECT")
 108 ENDIF()
 109
 110 # Level 1 prerequisites:
 111 SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
 112 SET_AND_CHECK(SIP_ROOT_DIR_EXP "@PACKAGE_SIP_ROOT_DIR@")
 113 SET_AND_CHECK(QT5_ROOT_DIR_EXP "@PACKAGE_QT_ROOT_DIR@")
 114 SET_AND_CHECK(PYQT5_ROOT_DIR_EXP "@PACKAGE_PYQT_ROOT_DIR@")
 115 SET_AND_CHECK(OPENCASCADE_ROOT_DIR_EXP "@PACKAGE_OPENCASCADE_ROOT_DIR@")
 116
 117 # Optional level 1 prerequisites:
 118 IF(SALOME_USE_GLVIEWER)
 119   SET_AND_CHECK(OPENGL_ROOT_DIR_EXP "@PACKAGE_OPENGL_ROOT_DIR@")
 120 ENDIF()
 121 IF(SALOME_USE_VTKVIEWER)
 122   SET_AND_CHECK(VTK_ROOT_DIR_EXP "@PACKAGE_VTK_ROOT_DIR@")
 123 ENDIF()
 124 IF(SALOME_USE_PLOT2DVIEWER)
 125   SET_AND_CHECK(QWT_ROOT_DIR_EXP "@PACKAGE_QWT_ROOT_DIR@")
 126 ENDIF()
 127
 128 # For all prerequisites, load the corresponding targets if the package was used
 129 # in CONFIG mode. This ensures dependent projects link correctly
 130 # without having to set LD_LIBRARY_PATH:
 131 SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
 132 SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
 133 SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
 134 LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
 135 IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
 136   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
 137   MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
 138   FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
 139     LIST(GET _PREREQ_@PROJECT_NAME@            ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@    )
 140     LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
 141     LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
 142     IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
 143       MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
 144       IF(NOT _pkg_compo_@PROJECT_NAME@)
 145         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
 146             PATHS "${_pkg_dir_@PROJECT_NAME@}"
 147             NO_DEFAULT_PATH)
 148       ELSE()
 149         STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
 150         MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
 151         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
 152             COMPONENTS ${_compo_lst_@PROJECT_NAME@}
 153             PATHS "${_pkg_dir_@PROJECT_NAME@}"
 154             NO_DEFAULT_PATH)
 155       ENDIF()
 156     ENDIF()
 157   ENDFOREACH()
 158 ENDIF()
 159
 160 # Installation directories
 161 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
 162 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
 163 SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
 164 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
 165 SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
 166 SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
 167 SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
 168 SET(SALOME_INSTALL_APPLISKEL_SCRIPTS "@SALOME_INSTALL_APPLISKEL_SCRIPTS@")
 169 SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
 170 SET(SALOME_INSTALL_CMAKE "@SALOME_INSTALL_CMAKE@")
 171 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
 172 SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
 173 SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
 174 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 175 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
 176 SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
 177
 178 # Include KERNEL targets if they were not already loaded:
 179 IF(NOT (TARGET SALOMEBasics))
 180   INCLUDE("${KERNEL_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeKERNELTargets.cmake")
 181 ENDIF()
 182
 183 # Exposed GUI targets:
 184 SET(GUI_caf caf)
 185 SET(GUI_CAM CAM)
 186 SET(GUI_CASCatch CASCatch)
 187 SET(GUI_DDS DDS)
 188 SET(GUI_Event Event)
 189 SET(GUI_GLViewer GLViewer)
 190 SET(GUI_LightApp LightApp)
 191 SET(GUI_LogWindow LogWindow)
 192 SET(GUI_ObjBrowser ObjBrowser)
 193 SET(GUI_OCCViewer OCCViewer)
 194 SET(GUI_OpenGLUtils OpenGLUtils)
 195 SET(GUI_Plot2d Plot2d)
 196 SET(GUI_PyConsole PyConsole)
 197 SET(GUI_PyInterp PyInterp)
 198 SET(GUI_PyEditor PyEditor)
 199 SET(GUI_PyViewer PyViewer)
 200 SET(GUI_QDS QDS)
 201 SET(GUI_qtx qtx)
 202 SET(GUI_QxScene QxScene)
 203 SET(GUI_SalomeApp SalomeApp)
 204 SET(GUI_SalomeAppSL SalomeAppSL)
 205 SET(GUI_SalomeAppImpl SalomeAppImpl)
 206 SET(GUI_SalomeIDLGUI SalomeIDLGUI)
 207 SET(GUI_SalomeObject SalomeObject)
 208 SET(GUI_SalomePrs SalomePrs)
 209 SET(GUI_SalomePyQtGUILight SalomePyQtGUILight)
 210 SET(GUI_SalomePyQtGUI SalomePyQtGUI)
 211 SET(GUI_SalomePyQt SalomePyQt)
 212 SET(GUI_SalomePy SalomePy)
 213 SET(GUI_SalomeSession SalomeSession)
 214 SET(GUI_SalomeStyle SalomeStyle)
 215 SET(GUI_SOCC SOCC)
 216 SET(GUI_SPlot2d SPlot2d)
 217 SET(GUI_std std)
 218 SET(GUI_SUITApp SUITApp)
 219 SET(GUI_suit suit)
 220 SET(GUI_SVTK SVTK)
 221 SET(GUI_ToolsGUI ToolsGUI)
 222 SET(GUI_ViewerTools ViewerTools)
 223 SET(GUI_ViewerData ViewerData)
 224 SET(GUI_VTKViewer VTKViewer)
 225 SET(GUI_PVViewer PVViewer)
 226 SET(GUI_PVServerService PVServerService)
 227 SET(GUI_vtkTools vtkTools)
 228 SET(GUI_SalomeGuiHelpers SalomeGuiHelpers)
 229 SET(GUI_SalomeTreeData SalomeTreeData)
 230 SET(GUI_ImageComposer ImageComposer)
 231 SET(GUI_GraphicsView GraphicsView)