#include "SMESH_subMesh.hxx"
#include "SMESH_subMeshEventListener.hxx"
#include "SMESH_MesherHelper.hxx"
+#include "SMESH_Comment.hxx"
#include "SMDS_VolumeTool.hxx"
#include "SMDS_PolyhedralVolumeOfNodes.hxx"
SMESH_Hypothesis::Hypothesis_Status& aStatus)
{
// check aShape that must be a 6 faces block
+/* PAL16229
if ( TAssocTool::Count( aShape, TopAbs_SHELL, 1 ) != 1 ||
TAssocTool::Count( aShape, TopAbs_FACE , 1 ) != 6 ||
TAssocTool::Count( aShape, TopAbs_EDGE , 1 ) != 12 ||
aStatus = HYP_BAD_GEOMETRY;
return false;
}
-
+*/
list <const SMESHDS_Hypothesis * >::const_iterator itl;
const list <const SMESHDS_Hypothesis * >&hyps = GetUsedHypothesis(aMesh, aShape);
for ( nbShell = 0; exp.More(); exp.Next(), ++nbShell )
srcShell = TopoDS::Shell( exp.Current() );
if ( nbShell != 1 )
- RETURN_BAD_RESULT("There must be 1 shell in the source shape");
+ return error(COMPERR_BAD_SHAPE,
+ SMESH_Comment("Source shape must have 1 shell but not ") << nbShell);
exp.Init( aShape, TopAbs_SHELL );
for ( nbShell = 0; exp.More(); exp.Next(), ++nbShell )
tgtShell = TopoDS::Shell( exp.Current() );
if ( nbShell != 1 )
- RETURN_BAD_RESULT("There must be 1 shell in the target shape");
+ return error(COMPERR_BAD_SHAPE,
+ SMESH_Comment("Target shape must have 1 shell but not ") << nbShell);
+
+ // Check that shapes are blocks
+ if ( TAssocTool::Count( tgtShell, TopAbs_FACE , 1 ) != 6 ||
+ TAssocTool::Count( tgtShell, TopAbs_EDGE , 1 ) != 12 ||
+ TAssocTool::Count( tgtShell, TopAbs_WIRE , 1 ) != 6 )
+ return error(COMPERR_BAD_SHAPE, "Target shape is not a block");
+ if ( TAssocTool::Count( srcShell, TopAbs_FACE , 1 ) != 6 ||
+ TAssocTool::Count( srcShell, TopAbs_EDGE , 1 ) != 12 ||
+ TAssocTool::Count( srcShell, TopAbs_WIRE , 1 ) != 6 )
+ return error(COMPERR_BAD_SHAPE, "Source shape is not a block");
// Assure that mesh on a source shape is computed
if ( tgtMesh == srcMesh && !aShape.IsSame( _sourceHypo->GetSource3DShape() )) {
if ( !TAssocTool::MakeComputed( srcSubMesh ))
- RETURN_BAD_RESULT("Impossible to compute the source mesh");
+ return error(COMPERR_BAD_INPUT_MESH,"Source mesh not computed");
}
else {
if ( !srcSubMesh->IsMeshComputed() )
- RETURN_BAD_RESULT("Source mesh is not computed");
+ return error(COMPERR_BAD_INPUT_MESH,"Source mesh not computed");
}
// Find 2 pairs of corresponding vertices
{
if ( !TAssocTool::FindSubShapeAssociation( tgtShell, tgtMesh, srcShell, srcMesh,
shape2ShapeMap) )
- RETURN_BAD_RESULT("FindSubShapeAssociation() failed");
+ return error(COMPERR_BAD_SHAPE,"Topology of source and target shapes seems different" );
exp.Init( tgtShell, TopAbs_EDGE );
TopExp::Vertices( TopoDS::Edge( exp.Current() ), tgtV000, tgtV100 );
if ( !shape2ShapeMap.IsBound( tgtV000 ) || !shape2ShapeMap.IsBound( tgtV100 ))
- RETURN_BAD_RESULT("Shape associating not done");
+ return error("Association of subshapes failed" );
srcV000 = TopoDS::Vertex( shape2ShapeMap( tgtV000 ));
srcV100 = TopoDS::Vertex( shape2ShapeMap( tgtV100 ));
if ( !TAssocTool::IsSubShape( srcV000, srcShell ) ||
!TAssocTool::IsSubShape( srcV100, srcShell ))
- RETURN_BAD_RESULT("Wrong target vertices");
+ return error("Incorrect association of subshapes" );
}
// Load 2 SMESH_Block's with src and tgt shells
SMESH_Block srcBlock, tgtBlock;
TopTools_IndexedMapOfOrientedShape scrShapes, tgtShapes;
if ( !tgtBlock.LoadBlockShapes( tgtShell, tgtV000, tgtV100, tgtShapes ))
- RETURN_BAD_RESULT("SMESH_Block::LoadBlockShapes(tgtShell) failed");
+ return error(COMPERR_BAD_SHAPE, "Can't detect block subshapes. Not a block?");
if ( !srcBlock.LoadBlockShapes( srcShell, srcV000, srcV100, scrShapes ))
- RETURN_BAD_RESULT("SMESH_Block::LoadBlockShapes(srcShell) failed");
+ return error(COMPERR_BAD_SHAPE, "Can't detect block subshapes. Not a block?");
// Find matching nodes of src and tgt shells
TNodeNodeMap faceMatchingNodes;
if ( ! TAssocTool::FindMatchingNodesOnFaces( srcFace, srcMesh, tgtFace, tgtMesh,
shape2ShapeMap, faceMatchingNodes ))
- RETURN_BAD_RESULT("Different mesh on corresponding src and tgt faces: "
- << srcMeshDS->ShapeToIndex( srcFace ) << " and "
- << tgtMeshDS->ShapeToIndex( tgtFace ));
+ return error(COMPERR_BAD_INPUT_MESH,SMESH_Comment("Mesh on faces #")
+ << srcMeshDS->ShapeToIndex( srcFace ) << " and "
+ << tgtMeshDS->ShapeToIndex( tgtFace ) << " seems different" );
// put found matching nodes of 2 faces to the global map
src2tgtNodeMap.insert( faceMatchingNodes.begin(), faceMatchingNodes.end() );
gp_Pnt srcCoord = gpXYZ( srcNode );
gp_XYZ srcParam;
if ( !srcBlock.ComputeParameters( srcCoord, srcParam ))
- RETURN_BAD_RESULT("srcBlock.ComputeParameters() failed");
+ return error(SMESH_Comment("Can't compute normalized parameters ")
+ << "for source node " << srcNode->GetID());
// compute coordinates of target node by srcParam
gp_XYZ tgtXYZ;
if ( !tgtBlock.ShellPoint( srcParam, tgtXYZ ))
- RETURN_BAD_RESULT("tgtBlock.ShellPoint() failed");
+ return error("Can't compute coordinates by normalized parameters");
// add node
SMDS_MeshNode* newNode = tgtMeshDS->AddNode( tgtXYZ.X(), tgtXYZ.Y(), tgtXYZ.Z() );
tgtMeshDS->SetNodeInVolume( newNode, helper.GetSubShapeID() );
// Create a new volume
SMDS_MeshVolume * tgtVol = 0;
+ int id = 0, force3d = false;
switch ( volType ) {
case SMDS_VolumeTool::TETRA :
case SMDS_VolumeTool::QUAD_TETRA:
tgtVol = helper.AddVolume( nodes[0],
nodes[1],
nodes[2],
- nodes[3]); break;
+ nodes[3], id, force3d); break;
case SMDS_VolumeTool::PYRAM :
case SMDS_VolumeTool::QUAD_PYRAM:
tgtVol = helper.AddVolume( nodes[0],
nodes[1],
nodes[2],
nodes[3],
- nodes[4]); break;
+ nodes[4], id, force3d); break;
case SMDS_VolumeTool::PENTA :
case SMDS_VolumeTool::QUAD_PENTA:
tgtVol = helper.AddVolume( nodes[0],
nodes[2],
nodes[3],
nodes[4],
- nodes[5]); break;
+ nodes[5], id, force3d); break;
case SMDS_VolumeTool::HEXA :
case SMDS_VolumeTool::QUAD_HEXA :
tgtVol = helper.AddVolume( nodes[0],
nodes[4],
nodes[5],
nodes[6],
- nodes[7]); break;
+ nodes[7], id, force3d); break;
default: // polyhedron
const SMDS_PolyhedralVolumeOfNodes * poly =
dynamic_cast<const SMDS_PolyhedralVolumeOfNodes*>( srcVol );
if ( !poly )
RETURN_BAD_RESULT("Unexpected volume type");
- vector<int> quantities( poly->NbFaces(), 0 );
- for ( int i = 0; i < quantities.size(); ++i )
- quantities[ i ] = poly->NbFaceNodes( i + 1 );
- tgtVol = tgtMeshDS->AddPolyhedralVolume( nodes, quantities );
+ tgtVol = tgtMeshDS->AddPolyhedralVolume( nodes, poly->GetQuanities() );
}
if ( tgtVol ) {
tgtMeshDS->SetMeshElementOnShape( tgtVol, helper.GetSubShapeID() );
void StdMeshers_Projection_3D::SetEventListener(SMESH_subMesh* subMesh)
{
- if ( _sourceHypo && ! _sourceHypo->GetSource3DShape().IsNull() )
- {
- SMESH_Mesh* srcMesh = _sourceHypo->GetSourceMesh();
- if ( !srcMesh )
- srcMesh = subMesh->GetFather();
-
- SMESH_subMesh* srcShapeSM =
- srcMesh->GetSubMesh( _sourceHypo->GetSource3DShape() );
-
- if ( srcShapeSM != subMesh )
- subMesh->SetEventListener( new SMESH_subMeshEventListener(true),
- SMESH_subMeshEventListenerData::MakeData( subMesh ),
- srcShapeSM );
- }
+ TAssocTool::SetEventListener( subMesh,
+ _sourceHypo->GetSource3DShape(),
+ _sourceHypo->GetSourceMesh() );
}
