-// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// SMESH SMESH : idl implementation based on 'SMESH' unit's calsses
#include "SMESH_Block.hxx"
#include "SMESH_Gen.hxx"
#include "SMESH_Hypothesis.hxx"
-#include "SMESH_IndexedDataMapOfShapeIndexedMapOfShape.hxx"
#include "SMESH_Mesh.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_subMesh.hxx"
#include <TopTools_Array1OfShape.hxx>
#include <TopTools_DataMapIteratorOfDataMapOfShapeListOfShape.hxx>
#include <TopTools_DataMapIteratorOfDataMapOfShapeShape.hxx>
+#include <TopTools_IndexedMapOfShape.hxx>
#include <TopTools_ListIteratorOfListOfShape.hxx>
#include <TopTools_ListOfShape.hxx>
#include <TopTools_MapOfShape.hxx>
if ( gr1It.Value().ShapeType() == TopAbs_FACE )
{
// find a boundary edge of group1 to start from
- TopoDS_Shape bndEdge;
- TopExp_Explorer edgeExp1( theGroup1, TopAbs_EDGE );
- for ( ; bndEdge.IsNull() && edgeExp1.More(); edgeExp1.Next())
- if ( HERE::IsBoundaryEdge( TopoDS::Edge( edgeExp1.Current()), theGroup1, theMesh ))
- bndEdge = edgeExp1.Current();
+ TopoDS_Shape bndEdge = StdMeshers_ProjectionUtils::GetBoundaryEdge( theGroup1, theMesh );
if ( bndEdge.IsNull() )
return false;
return dist2d < tol2d;
}
+ //================================================================================
+ /*!
+ * \brief Returns an EDGE suitable for search of initial vertex association
+ */
+ //================================================================================
+
+ TopoDS_Shape getOuterEdge( const TopoDS_Shape theShape1, SMESH_Mesh& mesh )
+ {
+ TopoDS_Shape edge;
+ if ( theShape1.ShapeType() == TopAbs_COMPOUND )
+ {
+ TopoDS_Iterator it( theShape1 );
+ if ( it.Value().ShapeType() == TopAbs_FACE ) // group of FACEs
+ {
+ // look for a boundary EDGE of a group
+ edge = StdMeshers_ProjectionUtils::GetBoundaryEdge( theShape1, mesh );
+ if ( !edge.IsNull() )
+ return edge;
+ }
+ }
+ edge = theShape1;
+ TopExp_Explorer expF( theShape1, TopAbs_FACE ), expE;
+ if ( expF.More() ) {
+ for ( ; expF.More(); expF.Next() ) {
+ edge.Nullify();
+ TopoDS_Shape wire =
+ StdMeshers_ProjectionUtils::OuterShape( TopoDS::Face( expF.Current() ), TopAbs_WIRE );
+ for ( expE.Init( wire, TopAbs_EDGE ); edge.IsNull() && expE.More(); expE.Next() )
+ if ( !SMESH_MesherHelper::IsClosedEdge( TopoDS::Edge( expE.Current() )))
+ edge = expE.Current();
+ if ( !edge.IsNull() )
+ break;
+ }
+ } else if (edge.ShapeType() != TopAbs_EDGE) { // no faces
+ edge.Nullify();
+ for ( expE.Init( theShape1, TopAbs_EDGE ); edge.IsNull() && expE.More(); expE.Next() )
+ if ( !SMESH_MesherHelper::IsClosedEdge( TopoDS::Edge( expE.Current() )))
+ edge = expE.Current();
+ }
+ return edge;
+ }
+
} // namespace
//=======================================================================
/*!
- * \brief Looks for association of all subshapes of two shapes
+ * \brief Looks for association of all sub-shapes of two shapes
* \param theShape1 - shape 1
* \param theMesh1 - mesh built on shape 1
* \param theShape2 - shape 2
if ( partner ) // Same shape with different location
{
- // recursively associate all subshapes of theShape1 and theShape2
+ // recursively associate all sub-shapes of theShape1 and theShape2
typedef list< pair< TopoDS_Shape, TopoDS_Shape > > TShapePairsList;
TShapePairsList shapesQueue( 1, make_pair( theShape1, theShape2 ));
TShapePairsList::iterator s1_s2 = shapesQueue.begin();
if ( edge2.IsNull() )
RETURN_BAD_RESULT("GetEdgeByVertices() failed");
- // build map of edge to faces if shapes are not subshapes of main ones
+ // build map of edge to faces if shapes are not sub-shapes of main ones
bool isSubOfMain = false;
if ( SMESHDS_SubMesh * sm = theMesh1->GetMeshDS()->MeshElements( theShape1 ))
isSubOfMain = !sm->IsComplexSubmesh();
TopTools_MapOfShape boundEdges;
- // association of face subshapes and neighbour faces
+ // association of face sub-shapes and neighbour faces
list< pair < TopoDS_Face, TopoDS_Edge > > FE1, FE2;
list< pair < TopoDS_Face, TopoDS_Edge > >::iterator fe1, fe2;
FE1.push_back( make_pair( TopoDS::Face( F1 ), edge1 ));
return true; // done
}
}
- if ( IsClosedEdge( edge1 ) && IsClosedEdge( edge2 ))
+ if ( SMESH_MesherHelper::IsClosedEdge( edge1 ) &&
+ SMESH_MesherHelper::IsClosedEdge( edge2 ))
{
// TODO: find out a proper orientation (is it possible?)
InsertAssociation( edge1, edge2, theMap, bidirect); // insert with a proper orientation
list< TopoDS_Edge > edges1, edges2;
int nbE = FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2 );
if ( !nbE ) RETURN_BAD_RESULT("FindFaceAssociation() failed");
- if ( nbE == 2 ) // only 2 edges
+ // take care of proper association of propagated edges
+ bool same1 = edge1.IsSame( edges1.front() );
+ bool same2 = edge2.IsSame( edges2.front() );
+ if ( same1 != same2 )
{
- // take care of proper association of propagated edges
- bool same1 = edge1.IsSame( edges1.front() );
- bool same2 = edge2.IsSame( edges2.front() );
- if ( same1 != same2 )
- Reverse(edges2, nbE);
+ Reverse(edges2, nbE);
+ if ( nbE != 2 ) // 2 degen edges of 4 (issue 0021144)
+ edges2.splice( edges2.end(), edges2, edges2.begin());
}
// store association
list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
if ( AssocGroupsByPropagation( theShape1, theShape2, *theMesh1, theMap ))
return true;
- // find a boundary edge for theShape1
- TopoDS_Edge E;
- for(TopExp_Explorer exp(theShape1, TopAbs_EDGE); exp.More(); exp.Next() ) {
- E = TopoDS::Edge( exp.Current() );
- if ( IsBoundaryEdge( E, theShape1, *theMesh1 ))
- break;
- else
- E.Nullify();
- }
+ // find a boundary edge of theShape1
+ TopoDS_Edge E = GetBoundaryEdge( theShape1, *theMesh1 );
if ( E.IsNull() )
break; // try by vertex closeness
default:;
}
- // Find association by closeness of vertices
- // ------------------------------------------
+ // 4.b) Find association by closeness of vertices
+ // ----------------------------------------------
TopTools_IndexedMapOfShape vMap1, vMap2;
TopExp::MapShapes( theShape1, TopAbs_VERTEX, vMap1 );
TopExp::MapShapes( theShape2, TopAbs_VERTEX, vMap2 );
+ TopoDS_Vertex VV1[2], VV2[2];
if ( vMap1.Extent() != vMap2.Extent() )
RETURN_BAD_RESULT("Different nb of vertices");
return FindSubShapeAssociation( theShape1, theMesh1, theShape2, theMesh2, theMap);
}
+ // Try to associate by common vertices of an edge
+ for ( int i = 1; i <= vMap1.Extent(); ++i )
+ {
+ const TopoDS_Shape& v1 = vMap1(i);
+ if ( vMap2.Contains( v1 ))
+ {
+ // find an egde sharing v1 and sharing at the same time another common vertex
+ PShapeIteratorPtr edgeIt = SMESH_MesherHelper::GetAncestors( v1, *theMesh1, TopAbs_EDGE);
+ bool edgeFound = false;
+ while ( edgeIt->more() && !edgeFound )
+ {
+ TopoDS_Edge edge = TopoDS::Edge( edgeIt->next()->Oriented(TopAbs_FORWARD));
+ TopExp::Vertices(edge, VV1[0], VV1[1]);
+ if ( !VV1[0].IsSame( VV1[1] ))
+ edgeFound = ( vMap2.Contains( VV1[ v1.IsSame(VV1[0]) ? 1:0]));
+ }
+ if ( edgeFound )
+ {
+ InsertAssociation( VV1[0], VV1[0], theMap, bidirect );
+ InsertAssociation( VV1[1], VV1[1], theMap, bidirect );
+ if (FindSubShapeAssociation( theShape1, theMesh1, theShape2, theMesh2, theMap ))
+ return true;
+ }
+ }
+ }
+
// Find transformation to make the shapes be of similar size at same location
Bnd_Box box[2];
// Find 2 closest vertices
- TopoDS_Vertex VV1[2], VV2[2];
// get 2 linked vertices of shape 1 not belonging to an inner wire of a face
- TopoDS_Shape edge = theShape1;
- TopExp_Explorer expF( theShape1, TopAbs_FACE ), expE;
- if ( expF.More() ) {
- for ( ; expF.More(); expF.Next() ) {
- edge.Nullify();
- TopoDS_Shape wire = OuterShape( TopoDS::Face( expF.Current() ), TopAbs_WIRE );
- for ( expE.Init( wire, TopAbs_EDGE ); edge.IsNull() && expE.More(); expE.Next() )
- if ( !IsClosedEdge( TopoDS::Edge( expE.Current() )))
- edge = expE.Current();
- if ( !edge.IsNull() )
- break;
- }
- } else if (edge.ShapeType() != TopAbs_EDGE) { // no faces
- edge.Nullify();
- for ( expE.Init( theShape1, TopAbs_EDGE ); edge.IsNull() && expE.More(); expE.Next() )
- if ( !IsClosedEdge( TopoDS::Edge( expE.Current() )))
- edge = expE.Current();
- }
+ TopoDS_Shape edge = getOuterEdge( theShape1, *theMesh1 );
if ( edge.IsNull() || edge.ShapeType() != TopAbs_EDGE )
RETURN_BAD_RESULT("Edge not found");
gp_Pnt2d v1f2UV = BRep_Tool::Parameters( VV2[1], face2 );
gp_Vec2d v01f1Vec( v0f1UV, v1f1UV );
gp_Vec2d v01f2Vec( v0f2UV, v1f2UV );
- if ( Abs( v01f1Vec.X()-v01f2Vec.X()) < vTolUV && Abs( v01f1Vec.Y()-v01f2Vec.Y()) < vTolUV )
+ if ( Abs( v01f1Vec.X()-v01f2Vec.X()) < vTolUV &&
+ Abs( v01f1Vec.Y()-v01f2Vec.Y()) < vTolUV )
{
- if ( i_ok_wire_algo != 1 )
+ if ( !OK /*i_ok_wire_algo != 1*/ )
{
edges1.clear();
edges2.clear();
const TopoDS_Edge& theEdge,
const TopoDS_Edge& fromEdge)
{
- SMESH_IndexedMapOfShape aChain;
+ TopTools_IndexedMapOfShape aChain;
int step = 0;
// List of edges, added to chain on the previous cycle pass
* \param mesh1 - mesh containing elements on the first face
* \param face2 - the second face
* \param mesh2 - mesh containing elements on the second face
- * \param assocMap - map associating subshapes of the faces
+ * \param assocMap - map associating sub-shapes of the faces
* \param node1To2Map - map containing found matching nodes
* \retval bool - is a success
*/
TopoDS_Edge e1 = TopoDS::Edge( assocMap( e2 ));
if ( !helper1.IsSubShape( e1, face1 ))
RETURN_BAD_RESULT("Wrong association, edge " << meshDS1->ShapeToIndex( e1 ) <<
- " isn't a subshape of face " << meshDS1->ShapeToIndex( face1 ));
+ " isn't a sub-shape of face " << meshDS1->ShapeToIndex( face1 ));
// check that there are nodes on edges
SMESHDS_SubMesh * eSM1 = meshDS1->MeshElements( e1 );
SMESHDS_SubMesh * eSM2 = meshDS2->MeshElements( e2 );
if ( hasNodesOnEdge )
{
int nbNodeToGet = 1;
- if ( IsClosedEdge( edge1 ) || IsClosedEdge( edge2 ) )
+ if ( helper1.IsClosedEdge( edge1 ) || helper2.IsClosedEdge( edge2 ) )
nbNodeToGet = 2;
for ( int is2 = 0; is2 < 2; ++is2 )
{
const SMDS_MeshElement* f = ( iF ? f2 : f1 );
for ( int i = 0; !notSeamNode[ iF ] && i < f->NbNodes(); ++i ) {
const SMDS_MeshNode* node = f->GetNode( i );
- if ( !helper->IsSeamShape( node->GetPosition()->GetShapeId() ))
+ if ( !helper->IsSeamShape( node->getshapeId() ))
notSeamNode[ iF ] = node;
}
}
while ( nIt->more() ) {
const SMDS_MeshNode* node = nIt->next();
const SMDS_EdgePosition* pos =
- static_cast<const SMDS_EdgePosition*>(node->GetPosition().get());
+ static_cast<const SMDS_EdgePosition*>(node->GetPosition());
pos2nodes.insert( make_pair( pos->GetUParameter(), node ));
}
if ( pos2nodes.size() != edgeSM->NbNodes() )
return true;
}
-//================================================================================
-/*!
- * \brief Check if the first and last vertices of an edge are the same
- * \param anEdge - the edge to check
- * \retval bool - true if same
- */
-//================================================================================
-
-bool StdMeshers_ProjectionUtils::IsClosedEdge( const TopoDS_Edge& anEdge )
-{
- return TopExp::FirstVertex( anEdge ).IsSame( TopExp::LastVertex( anEdge ));
-}
-
//================================================================================
/*!
- * \brief Return any subshape of a face belonging to the outer wire
+ * \brief Return any sub-shape of a face belonging to the outer wire
* \param face - the face
- * \param type - type of subshape to return
- * \retval TopoDS_Shape - the found subshape
+ * \param type - type of sub-shape to return
+ * \retval TopoDS_Shape - the found sub-shape
*/
//================================================================================
SMESH_Mesh* mesh = sm->GetFather();
SMESH_Gen* gen = mesh->GetGen();
- SMESH_Algo* algo = gen->GetAlgo( *mesh, sm->GetSubShape() );
+ SMESH_Algo* algo = sm->GetAlgo();
if ( !algo )
{
if ( sm->GetSubShape().ShapeType() != TopAbs_COMPOUND )
//================================================================================
/*!
- * \brief Count nb of subshapes
+ * \brief Count nb of sub-shapes
* \param shape - the shape
- * \param type - the type of subshapes to count
+ * \param type - the type of sub-shapes to count
* \retval int - the calculated number
*/
//================================================================================
//================================================================================
/*!
- * \brief Return true if edge is a boundary of edgeContainer
+ * \brief Return a boundary EDGE of edgeContainer
*/
//================================================================================
-bool StdMeshers_ProjectionUtils::IsBoundaryEdge(const TopoDS_Edge& edge,
- const TopoDS_Shape& edgeContainer,
- SMESH_Mesh& mesh)
+TopoDS_Edge StdMeshers_ProjectionUtils::GetBoundaryEdge(const TopoDS_Shape& edgeContainer,
+ const SMESH_Mesh& mesh)
{
TopTools_IndexedMapOfShape facesOfEdgeContainer, facesNearEdge;
TopExp::MapShapes( edgeContainer, TopAbs_FACE, facesOfEdgeContainer );
- const TopTools_ListOfShape& EAncestors = mesh.GetAncestors(edge);
- TopTools_ListIteratorOfListOfShape itea(EAncestors);
- for(; itea.More(); itea.Next()) {
- if( itea.Value().ShapeType() == TopAbs_FACE &&
- facesOfEdgeContainer.Contains( itea.Value() ))
+ if ( !facesOfEdgeContainer.IsEmpty() )
+ for ( TopExp_Explorer exp(edgeContainer, TopAbs_EDGE); exp.More(); exp.Next() )
{
- facesNearEdge.Add( itea.Value() );
- if ( facesNearEdge.Extent() > 1 )
- return false;
+ const TopoDS_Edge& edge = TopoDS::Edge( exp.Current() );
+ facesNearEdge.Clear();
+ PShapeIteratorPtr faceIt = SMESH_MesherHelper::GetAncestors( edge, mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = faceIt->next() )
+ if ( facesOfEdgeContainer.Contains( *face ))
+ if ( facesNearEdge.Add( *face ) && facesNearEdge.Extent() > 1 )
+ break;
+ if ( facesNearEdge.Extent() == 1 )
+ return edge;
}
- }
- return ( facesNearEdge.Extent() == 1 );
+
+ return TopoDS_Edge();
}
-namespace {
+namespace { // Definition of event listeners
SMESH_subMeshEventListener* GetSrcSubMeshListener();
struct HypModifWaiter: SMESH_subMeshEventListener
{
- HypModifWaiter():SMESH_subMeshEventListener(0){} // won't be deleted by submesh
-
+ HypModifWaiter():SMESH_subMeshEventListener(false,// won't be deleted by submesh
+ "StdMeshers_ProjectionUtils::HypModifWaiter") {}
void ProcessEvent(const int event, const int eventType, SMESH_subMesh* subMesh,
EventListenerData*, const SMESH_Hypothesis*)
{
// delete current source listener
subMesh->DeleteEventListener( GetSrcSubMeshListener() );
// let algo set a new one
- SMESH_Gen* gen = subMesh->GetFather()->GetGen();
- if ( SMESH_Algo* algo = gen->GetAlgo( *subMesh->GetFather(),
- subMesh->GetSubShape() ))
+ if ( SMESH_Algo* algo = subMesh->GetAlgo() )
algo->SetEventListener( subMesh );
}
}
//================================================================================
SMESH_subMeshEventListener* GetSrcSubMeshListener() {
- static SMESH_subMeshEventListener srcListener(0); // won't be deleted by submesh
+ static SMESH_subMeshEventListener srcListener(false, // won't be deleted by submesh
+ "StdMeshers_ProjectionUtils::SrcSubMeshListener");
return &srcListener;
}
}
if ( srcShapeSM->GetSubMeshDS() &&
srcShapeSM->GetSubMeshDS()->IsComplexSubmesh() )
{ // source shape is a group
- TopExp_Explorer it(srcShapeSM->GetSubShape(), // explore the group into subshapes...
+ TopExp_Explorer it(srcShapeSM->GetSubShape(), // explore the group into sub-shapes...
subMesh->GetSubShape().ShapeType()); // ...of target shape type
for (; it.More(); it.Next())
{