#include "StdMeshers_ProjectionSource2D.hxx"
#include "StdMeshers_ProjectionSource3D.hxx"
+#include "SMDS_EdgePosition.hxx"
#include "SMESH_Algo.hxx"
#include "SMESH_Block.hxx"
#include "SMESH_Gen.hxx"
+#include "SMESH_HypoFilter.hxx"
#include "SMESH_Hypothesis.hxx"
#include "SMESH_Mesh.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_subMesh.hxx"
#include "SMESH_subMeshEventListener.hxx"
-#include "SMDS_EdgePosition.hxx"
#include "utilities.h"
list<SMESH_subMesh*> subMeshes = tgtMesh1->GetGroupSubMeshesContaining(tgtShape);
list<SMESH_subMesh*>::iterator sm = subMeshes.begin();
int type, last = TopAbs_SHAPE;
- StdMeshers_ProjectionUtils util;
for ( ; sm != subMeshes.end(); ++sm ) {
const TopoDS_Shape & group = (*sm)->GetSubShape();
// check if group is similar to srcGroup
for ( type = srcGroup.ShapeType(); type < last; ++type)
- if ( util.Count( srcGroup, (TopAbs_ShapeEnum)type, 0) !=
- util.Count( group, (TopAbs_ShapeEnum)type, 0))
+ if ( SMESH_MesherHelper::Count( srcGroup, (TopAbs_ShapeEnum)type, 0) !=
+ SMESH_MesherHelper::Count( group, (TopAbs_ShapeEnum)type, 0))
break;
if ( type == last )
return group;
// get edges of the face
TopoDS_Edge edgeGr1, edgeGr2, verticEdge2;
list< TopoDS_Edge > edges; list< int > nbEdgesInWire;
- SMESH_Block::GetOrderedEdges( face, v1, edges, nbEdgesInWire);
+ SMESH_Block::GetOrderedEdges( face, edges, nbEdgesInWire, v1);
if ( nbEdgesInWire.front() != 4 )
return _StoreBadShape( face );
list< TopoDS_Edge >::iterator edge = edges.begin();
} // namespace
//=======================================================================
-/*!
- * \brief Looks for association of all sub-shapes of two shapes
- * \param theShape1 - target shape
- * \param theMesh1 - mesh built on shape 1
- * \param theShape2 - source shape
- * \param theMesh2 - mesh built on shape 2
- * \param theAssociation - association map to be filled that may
- * contain association of one or two pairs of vertices
- * \retval bool - true if association found
+/*
+ * Looks for association of all sub-shapes of two shapes
+ * \param theShape1 - target shape
+ * \param theMesh1 - mesh built on shape 1
+ * \param theShape2 - source shape
+ * \param theMesh2 - mesh built on shape 2
+ * \param theAssociation - association map to be filled that may
+ * contain association of one or two pairs of vertices
+ * \retval bool - true if association found
*/
//=======================================================================
// Maybe groups contain only one member
TopoDS_Iterator it1( theShape1 ), it2( theShape2 );
TopAbs_ShapeEnum memberType = it1.Value().ShapeType();
- int nbMembers = Count( theShape1, memberType, true );
+ int nbMembers = SMESH_MesherHelper::Count( theShape1, memberType, true );
if ( nbMembers == 0 ) return true;
if ( nbMembers == 1 ) {
return FindSubShapeAssociation( it1.Value(), theMesh1, it2.Value(), theMesh2, theMap );
if ( groupEdges[ is2ndGroup ].Contains( f.Current() ))
if ( ++nbGroupEdges > 1 )
break;
- bool add = (nbGroupEdges > 1 || Count( face, TopAbs_EDGE, true ) == 1 );
+ bool add = (nbGroupEdges > 1 ||
+ SMESH_MesherHelper::Count( face, TopAbs_EDGE, true ) == 1 );
if ( !add ) {
add = true;
for ( TopExp_Explorer v( face, TopAbs_VERTEX ); add && v.More(); v.Next())
}
// Associate shells
//
- int nbFaces1 = Count( shell1, TopAbs_FACE, 0 );
- int nbFaces2 = Count( shell2, TopAbs_FACE, 0 );
+ int nbFaces1 = SMESH_MesherHelper:: Count( shell1, TopAbs_FACE, 0 );
+ int nbFaces2 = SMESH_MesherHelper:: Count( shell2, TopAbs_FACE, 0 );
if ( nbFaces1 != nbFaces2 )
RETURN_BAD_RESULT("Different nb of faces found for shells");
if ( nbFaces1 > 0 ) {
if ( face2.Orientation() >= TopAbs_INTERNAL ) face2.Orientation( TopAbs_FORWARD );
TopoDS_Edge edge1, edge2;
// get outer edge of theShape1
- edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
- // find out if any edge of face2 is a propagation edge of outer edge1
+ TopoDS_Shape wire = OuterShape( face1, TopAbs_WIRE );
+ //edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
map<int,TopoDS_Edge> propag_edges; // use map to find the closest propagation edge
- for ( TopExp_Explorer exp( face2, TopAbs_EDGE ); exp.More(); exp.Next() ) {
- edge2 = TopoDS::Edge( exp.Current() );
- pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
- if ( !step_edge.second.IsNull() ) { // propagation found
- propag_edges.insert( step_edge );
- if ( step_edge.first == 1 ) break; // most close found
+ for ( TopoDS_Iterator edgeIt( wire ); edgeIt.More(); edgeIt.Next() )
+ {
+ edge1 = TopoDS::Edge( edgeIt.Value() );
+ // find out if any edge of face2 is a propagation edge of outer edge1
+ for ( TopExp_Explorer exp( face2, TopAbs_EDGE ); exp.More(); exp.Next() ) {
+ edge2 = TopoDS::Edge( exp.Current() );
+ pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
+ if ( !step_edge.second.IsNull() ) { // propagation found
+ propag_edges.insert( step_edge );
+ if ( step_edge.first == 1 ) break; // most close found
+ }
}
+ if ( !propag_edges.empty() && propag_edges.begin()->first == 1 ) break;
}
if ( !propag_edges.empty() ) // propagation found
{
if ( vMap1.Extent() != vMap2.Extent() )
{
- if ( HERE::Count( theShape1, TopAbs_EDGE, /*ignoreSame=*/false ) !=
- HERE::Count( theShape2, TopAbs_EDGE, /*ignoreSame=*/false ))
+ if ( SMESH_MesherHelper:: Count( theShape1, TopAbs_EDGE, /*ignoreSame=*/false ) !=
+ SMESH_MesherHelper:: Count( theShape2, TopAbs_EDGE, /*ignoreSame=*/false ))
RETURN_BAD_RESULT("Different nb of vertices");
}
}
//================================================================================
-/*!
- * \brief Find association of edges of faces
- * \param face1 - face 1
- * \param VV1 - vertices of face 1
- * \param face2 - face 2
- * \param VV2 - vertices of face 2 associated with ones of face 1
- * \param edges1 - out list of edges of face 1
- * \param edges2 - out list of edges of face 2
- * \retval int - nb of edges in an outer wire in a success case, else zero
+/*
+ * Find association of edges of faces
+ * \param face1 - face 1
+ * \param VV1 - vertices of face 1
+ * \param face2 - face 2
+ * \param VV2 - vertices of face 2 associated with ones of face 1
+ * \param edges1 - out list of edges of face 1
+ * \param edges2 - out list of edges of face 2
+ * \retval int - nb of edges in an outer wire in a success case, else zero
*/
//================================================================================
edges1.clear();
edges2.clear();
- if ( SMESH_Block::GetOrderedEdges( face1, VV1[0], edges1, nbEInW1, outer_wire_algo) !=
- SMESH_Block::GetOrderedEdges( face2, VV2[0], edges2, nbEInW2, outer_wire_algo) )
+ if ( SMESH_Block::GetOrderedEdges( face1, edges1, nbEInW1, VV1[0], outer_wire_algo) !=
+ SMESH_Block::GetOrderedEdges( face2, edges2, nbEInW2, VV2[0], outer_wire_algo) )
CONT_BAD_RESULT("Different number of wires in faces ");
if ( nbEInW1 != nbEInW2 && outer_wire_algo == 0 &&
{
edges1.clear();
edges2.clear();
- SMESH_Block::GetOrderedEdges( face1, VV1[0], edges1, nbEInW1, i_ok_wire_algo);
- SMESH_Block::GetOrderedEdges( face2, VV2[0], edges2, nbEInW2, i_ok_wire_algo);
+ SMESH_Block::GetOrderedEdges( face1, edges1, nbEInW1, VV1[0], i_ok_wire_algo);
+ SMESH_Block::GetOrderedEdges( face2, edges2, nbEInW2, VV2[0], i_ok_wire_algo);
}
gp_XY dUV = v0f2UV.XY() - v0f1UV.XY(); // UV shift between 2 faces
//
}
//=======================================================================
-/*!
- * \brief Inserts association theShape1 <-> theShape2 to TShapeShapeMap
- * \param theShape1 - target shape
- * \param theShape2 - source shape
- * \param theAssociationMap - association map
- * \retval bool - true if there was no association for these shapes before
+/*
+ * Inserts association theShape1 <-> theShape2 to TShapeShapeMap
+ * \param theShape1 - target shape
+ * \param theShape2 - source shape
+ * \param theAssociationMap - association map
+ * \retval bool - true if there was no association for these shapes before
*/
//=======================================================================
}
//=======================================================================
-/*!
- * \brief Finds an edge by its vertices in a main shape of the mesh
- * \param aMesh - the mesh
- * \param V1 - vertex 1
- * \param V2 - vertex 2
- * \retval TopoDS_Edge - found edge
+/*
+ * Finds an edge by its vertices in a main shape of the mesh
+ * \param aMesh - the mesh
+ * \param V1 - vertex 1
+ * \param V2 - vertex 2
+ * \retval TopoDS_Edge - found edge
*/
//=======================================================================
}
//================================================================================
-/*!
- * \brief Return another face sharing an edge
- * \param edgeToFaces - data map of descendants to ancestors
- * \param edge - edge
- * \param face - face
- * \retval TopoDS_Face - found face
+/*
+ * Return another face sharing an edge
+ * \param edgeToFaces - data map of descendants to ancestors
+ * \param edge - edge
+ * \param face - face
+ * \retval TopoDS_Face - found face
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return other vertex of an edge
+/*
+ * Return other vertex of an edge
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return a propagation edge
- * \param aMesh - mesh
- * \param theEdge - edge to find by propagation
- * \param fromEdge - start edge for propagation
- * \retval pair<int,TopoDS_Edge> - propagation step and found edge
+/*
+ * Return a propagation edge
+ * \param aMesh - mesh
+ * \param theEdge - edge to find by propagation
+ * \param fromEdge - start edge for propagation
+ * \retval pair<int,TopoDS_Edge> - propagation step and found edge
*/
//================================================================================
}
//================================================================================
- /*!
- * \brief Find corresponding nodes on two faces
- * \param face1 - the first face
- * \param mesh1 - mesh containing elements on the first face
- * \param face2 - the second face
- * \param mesh2 - mesh containing elements on the second face
- * \param assocMap - map associating sub-shapes of the faces
- * \param node1To2Map - map containing found matching nodes
- * \retval bool - is a success
- */
+/*
+ * Find corresponding nodes on two faces
+ * \param face1 - the first face
+ * \param mesh1 - mesh containing elements on the first face
+ * \param face2 - the second face
+ * \param mesh2 - mesh containing elements on the second face
+ * \param assocMap - map associating sub-shapes of the faces
+ * \param node1To2Map - map containing found matching nodes
+ * \retval bool - is a success
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::
{
SMESHDS_Mesh* meshDS1 = mesh1->GetMeshDS();
SMESHDS_Mesh* meshDS2 = mesh2->GetMeshDS();
-
+
SMESH_MesherHelper helper1( *mesh1 );
SMESH_MesherHelper helper2( *mesh2 );
node1To2Map.insert( make_pair( vNode1, vNode2 ));
}
-// don't know why this condition is usually true :(
-// if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
-// MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
-// << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
-// << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
-// << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
-
+ // don't know why this condition is usually true :(
+ // if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
+ // MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
+ // << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
+ // << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
+ // << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
+
return true;
}
//================================================================================
- /*!
- * \brief Return any sub-shape of a face belonging to the outer wire
- * \param face - the face
- * \param type - type of sub-shape to return
- * \retval TopoDS_Shape - the found sub-shape
- */
+/*
+ * Return any sub-shape of a face belonging to the outer wire
+ * \param face - the face
+ * \param type - type of sub-shape to return
+ * \retval TopoDS_Shape - the found sub-shape
+ */
//================================================================================
TopoDS_Shape StdMeshers_ProjectionUtils::OuterShape( const TopoDS_Face& face,
}
//================================================================================
- /*!
- * \brief Check that submesh is computed and try to compute it if is not
- * \param sm - submesh to compute
- * \param iterationNb - int used to stop infinite recursive call
- * \retval bool - true if computed
- */
+/*
+ * Check that submesh is computed and try to compute it if is not
+ * \param sm - submesh to compute
+ * \param iterationNb - int used to stop infinite recursive call
+ * \retval bool - true if computed
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::MakeComputed(SMESH_subMesh * sm, const int iterationNb)
return false;
}
+
//================================================================================
-/*!
- * \brief Count nb of sub-shapes
- * \param shape - the shape
- * \param type - the type of sub-shapes to count
- * \retval int - the calculated number
+/*
+ * Returns an error message to show in case if MakeComputed( sm ) fails.
*/
//================================================================================
-int StdMeshers_ProjectionUtils::Count(const TopoDS_Shape& shape,
- const TopAbs_ShapeEnum type,
- const bool ignoreSame)
+std::string StdMeshers_ProjectionUtils::SourceNotComputedError( SMESH_subMesh * sm,
+ SMESH_Algo* projAlgo )
{
- if ( ignoreSame ) {
- TopTools_IndexedMapOfShape map;
- TopExp::MapShapes( shape, type, map );
- return map.Extent();
- }
- else {
- int nb = 0;
- for ( TopExp_Explorer exp( shape, type ); exp.More(); exp.Next() )
- ++nb;
- return nb;
+ const char usualMessage [] = "Source mesh not computed";
+ if ( !projAlgo )
+ return usualMessage;
+ if ( !sm || sm->GetAlgoState() != SMESH_subMesh::NO_ALGO )
+ return usualMessage; // algo is OK, anything else is KO.
+
+ // Try to find a type of all-dimentional algorithm that would compute the
+ // given sub-mesh if it could be launched before projection
+ const TopoDS_Shape shape = sm->GetSubShape();
+ const int shapeDim = SMESH_Gen::GetShapeDim( shape );
+
+ for ( int dimIncrement = 1; shapeDim + dimIncrement < 4; ++dimIncrement )
+ {
+ SMESH_HypoFilter filter( SMESH_HypoFilter::IsAlgo() );
+ filter.And( filter.HasDim( shapeDim + dimIncrement ));
+
+ SMESH_Algo* algo = (SMESH_Algo*) sm->GetFather()->GetHypothesis( shape, filter, true );
+ if ( algo && !algo->NeedDiscreteBoundary() )
+ return SMESH_Comment("\"")
+ << algo->GetFeatures()._label << "\""
+ << " can't be used to compute the source mesh for \""
+ << projAlgo->GetFeatures()._label << "\" in this case";
}
+ return usualMessage;
}
//================================================================================
-/*!
- * \brief Return a boundary EDGE of edgeContainer
+/*
+ * Return a boundary EDGE (or all boundary EDGEs) of edgeContainer
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Set event listeners to submesh with projection algo
- * \param subMesh - submesh with projection algo
- * \param srcShape - source shape
- * \param srcMesh - source mesh
+/*
+ * Set event listeners to submesh with projection algo
+ * \param subMesh - submesh with projection algo
+ * \param srcShape - source shape
+ * \param srcMesh - source mesh
*/
//================================================================================