-// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// SMESH SMESH : implementaion of SMESH idl descriptions
// File : StdMeshers_Prism_3D.cxx
// Module : SMESH
// Created : Fri Oct 20 11:37:07 2006
myHelper->IsQuadraticSubMesh( theShape );
- // Analyse mesh and geomerty to find block subshapes and submeshes
+ // Analyse mesh and geomerty to find block sub-shapes and submeshes
if ( !myBlock.Init( myHelper, theShape ))
return error( myBlock.GetError());
void StdMeshers_Prism_3D::AddPrisms( vector<const TNodeColumn*> & columns,
SMESH_MesherHelper* helper)
{
- SMESHDS_Mesh * meshDS = helper->GetMeshDS();
- int shapeID = helper->GetSubShapeID();
-
int nbNodes = columns.size();
int nbZ = columns[0]->size();
if ( nbZ < 2 ) return;
int z = 1;
switch ( nbNodes ) {
case 3: {
- const SMDS_MeshNode* botNodes[3] = { (*columns[0])[z-1],
- (*columns[1])[z-1],
- (*columns[2])[z-1] };
- const SMDS_MeshNode* topNodes[3] = { (*columns[0])[z],
- (*columns[1])[z],
- (*columns[2])[z] };
- SMDS_VolumeOfNodes tmpVol ( botNodes[0], botNodes[1], botNodes[2],
- topNodes[0], topNodes[1], topNodes[2]);
- vTool.Set( &tmpVol );
+ SMDS_VolumeOfNodes tmpPenta ( (*columns[0])[z-1], // bottom
+ (*columns[1])[z-1],
+ (*columns[2])[z-1],
+ (*columns[0])[z], // top
+ (*columns[1])[z],
+ (*columns[2])[z] );
+ vTool.Set( &tmpPenta );
isForward = vTool.IsForward();
break;
}
case 4: {
- const SMDS_MeshNode* botNodes[4] = { (*columns[0])[z-1], (*columns[1])[z-1],
- (*columns[2])[z-1], (*columns[3])[z-1] };
- const SMDS_MeshNode* topNodes[4] = { (*columns[0])[z], (*columns[1])[z],
- (*columns[2])[z], (*columns[3])[z] };
- SMDS_VolumeOfNodes tmpVol ( botNodes[0], botNodes[1], botNodes[2], botNodes[3],
- topNodes[0], topNodes[1], topNodes[2], topNodes[3]);
- vTool.Set( &tmpVol );
+ SMDS_VolumeOfNodes tmpHex( (*columns[0])[z-1], (*columns[1])[z-1], // bottom
+ (*columns[2])[z-1], (*columns[3])[z-1],
+ (*columns[0])[z], (*columns[1])[z], // top
+ (*columns[2])[z], (*columns[3])[z] );
+ vTool.Set( &tmpHex );
isForward = vTool.IsForward();
break;
}
+ default:
+ const int di = (nbNodes+1) / 3;
+ SMDS_VolumeOfNodes tmpVol ( (*columns[0] )[z-1],
+ (*columns[di] )[z-1],
+ (*columns[2*di])[z-1],
+ (*columns[0] )[z],
+ (*columns[di] )[z],
+ (*columns[2*di])[z] );
+ vTool.Set( &tmpVol );
+ isForward = vTool.IsForward();
}
// vertical loop on columns
- for ( z = 1; z < nbZ; ++z )
- {
- SMDS_MeshElement* vol = 0;
- switch ( nbNodes ) {
- case 3: {
- const SMDS_MeshNode* botNodes[3] = { (*columns[0])[z-1],
- (*columns[1])[z-1],
- (*columns[2])[z-1] };
- const SMDS_MeshNode* topNodes[3] = { (*columns[0])[z],
- (*columns[1])[z],
- (*columns[2])[z] };
- if ( isForward )
- vol = helper->AddVolume( botNodes[0], botNodes[1], botNodes[2],
- topNodes[0], topNodes[1], topNodes[2]);
- else
- vol = helper->AddVolume( topNodes[0], topNodes[1], topNodes[2],
- botNodes[0], botNodes[1], botNodes[2]);
- break;
- }
- case 4: {
- const SMDS_MeshNode* botNodes[4] = { (*columns[0])[z-1], (*columns[1])[z-1],
- (*columns[2])[z-1], (*columns[3])[z-1] };
- const SMDS_MeshNode* topNodes[4] = { (*columns[0])[z], (*columns[1])[z],
- (*columns[2])[z], (*columns[3])[z] };
- if ( isForward )
- vol = helper->AddVolume( botNodes[0], botNodes[1], botNodes[2], botNodes[3],
- topNodes[0], topNodes[1], topNodes[2], topNodes[3]);
- else
- vol = helper->AddVolume( topNodes[0], topNodes[1], topNodes[2], topNodes[3],
- botNodes[0], botNodes[1], botNodes[2], botNodes[3]);
- break;
- }
- default:
- // polyhedron
- vector<const SMDS_MeshNode*> nodes( 2*nbNodes + 4*nbNodes);
- vector<int> quantities( 2 + nbNodes, 4 );
- quantities[0] = quantities[1] = nbNodes;
- columns.resize( nbNodes + 1 );
- columns[ nbNodes ] = columns[ 0 ];
+ helper->SetElementsOnShape( true );
+
+ switch ( nbNodes ) {
+
+ case 3: { // ---------- pentahedra
+ const int i1 = isForward ? 1 : 2;
+ const int i2 = isForward ? 2 : 1;
+ for ( z = 1; z < nbZ; ++z )
+ helper->AddVolume( (*columns[0 ])[z-1], // bottom
+ (*columns[i1])[z-1],
+ (*columns[i2])[z-1],
+ (*columns[0 ])[z], // top
+ (*columns[i1])[z],
+ (*columns[i2])[z] );
+ break;
+ }
+ case 4: { // ---------- hexahedra
+ const int i1 = isForward ? 1 : 3;
+ const int i3 = isForward ? 3 : 1;
+ for ( z = 1; z < nbZ; ++z )
+ helper->AddVolume( (*columns[0])[z-1], (*columns[i1])[z-1], // bottom
+ (*columns[2])[z-1], (*columns[i3])[z-1],
+ (*columns[0])[z], (*columns[i1])[z], // top
+ (*columns[2])[z], (*columns[i3])[z] );
+ break;
+ }
+ case 6: { // ---------- octahedra
+ const int iBase1 = isForward ? -1 : 0;
+ const int iBase2 = isForward ? 0 :-1;
+ for ( z = 1; z < nbZ; ++z )
+ helper->AddVolume( (*columns[0])[z+iBase1], (*columns[1])[z+iBase1], // bottom or top
+ (*columns[2])[z+iBase1], (*columns[3])[z+iBase1],
+ (*columns[4])[z+iBase1], (*columns[5])[z+iBase1],
+ (*columns[0])[z+iBase2], (*columns[1])[z+iBase2], // top or bottom
+ (*columns[2])[z+iBase2], (*columns[3])[z+iBase2],
+ (*columns[4])[z+iBase2], (*columns[5])[z+iBase2] );
+ break;
+ }
+ default: // ---------- polyhedra
+ vector<int> quantities( 2 + nbNodes, 4 );
+ quantities[0] = quantities[1] = nbNodes;
+ columns.resize( nbNodes + 1 );
+ columns[ nbNodes ] = columns[ 0 ];
+ const int i1 = isForward ? 1 : 3;
+ const int i3 = isForward ? 3 : 1;
+ const int iBase1 = isForward ? -1 : 0;
+ const int iBase2 = isForward ? 0 :-1;
+ vector<const SMDS_MeshNode*> nodes( 2*nbNodes + 4*nbNodes);
+ for ( z = 1; z < nbZ; ++z )
+ {
for ( int i = 0; i < nbNodes; ++i ) {
- nodes[ i ] = (*columns[ i ])[z-1]; // bottom
- nodes[ i+nbNodes ] = (*columns[ i ])[z ]; // top
+ nodes[ i ] = (*columns[ i ])[z+iBase1]; // bottom or top
+ nodes[ 2*nbNodes-i-1 ] = (*columns[ i ])[z+iBase2]; // top or bottom
// side
- int di = 2*nbNodes + 4*i - 1;
- nodes[ di ] = (*columns[i ])[z-1];
- nodes[ di+1 ] = (*columns[i+1])[z-1];
- nodes[ di+2 ] = (*columns[i+1])[z ];
- nodes[ di+3 ] = (*columns[i ])[z ];
+ int di = 2*nbNodes + 4*i;
+ nodes[ di+0 ] = (*columns[i ])[z ];
+ nodes[ di+i1] = (*columns[i+1])[z ];
+ nodes[ di+2 ] = (*columns[i+1])[z-1];
+ nodes[ di+i3] = (*columns[i ])[z-1];
}
- vol = meshDS->AddPolyhedralVolume( nodes, quantities );
+ helper->AddPolyhedralVolume( nodes, quantities );
}
- if ( vol && shapeID > 0 )
- meshDS->SetMeshElementOnShape( vol, shapeID );
- }
+
+ } // switch ( nbNodes )
}
//================================================================================
//================================================================================
/*!
- * \brief Set projection coordinates of a node to a face and it's subshapes
+ * \brief Set projection coordinates of a node to a face and it's sub-shapes
* \param faceID - the face given by in-block ID
* \param params - node normalized parameters
* \retval bool - is a success
int nbSplit = i_nb->second;
vector< double > params;
splitParams( nbSplit, &myParam2ColumnMaps[ iE ], params );
- bool isForward = ( edgeIt->Orientation() == TopAbs_FORWARD );
+ const bool isForward =
+ StdMeshers_PrismAsBlock::IsForwardEdge( myHelper->GetMeshDS(),
+ myParam2ColumnMaps[iE],
+ *edgeIt, SMESH_Block::ID_Fx0z );
for ( int i = 0; i < nbSplit; ++i ) {
- double f = ( isForward ? params[ i ] : params[ nbSplit - i-1 ]);
+ double f = ( isForward ? params[ i ] : params[ nbSplit - i-1 ]);
double l = ( isForward ? params[ i+1 ] : params[ nbSplit - i ]);
TSideFace* comp = new TSideFace( myHelper, wallFaceIds[ iSide ],
*faceIt, *edgeIt,
for ( int iE = 0; iE < nbEdgesInWires.front(); ++iE, ++edgeIt )
{
if ( BRep_Tool::Degenerated( *edgeIt )) continue;
- const TParam2ColumnMap& u2colMap =
+ const TParam2ColumnMap* u2colMap =
GetParam2ColumnMap( myHelper->GetMeshDS()->ShapeToIndex( *edgeIt ), isReverse );
+ if ( !u2colMap ) return false;
isReverse = ( edgeIt->Orientation() == TopAbs_REVERSED );
- double f = u2colMap.begin()->first, l = u2colMap.rbegin()->first;
+ double f = u2colMap->begin()->first, l = u2colMap->rbegin()->first;
if ( isReverse ) swap ( f, l );
const int nbCol = 5;
for ( int i = 0; i < nbCol; ++i )
{
double u = f + i/double(nbCol) * ( l - f );
- const TNodeColumn* col = & getColumn( & u2colMap, u )->second;
+ const TNodeColumn* col = & getColumn( u2colMap, u )->second;
if ( columns.empty() || col != columns.back() )
columns.push_back( col );
}
* \param columnsMap - node columns map of side face
* \param bottomEdge - the bootom edge
* \param sideFaceID - side face in-block ID
- * \retval bool - true if orientation coinside with in-block froward orientation
+ * \retval bool - true if orientation coinside with in-block forward orientation
*/
//================================================================================
// find edge by 2 vertices
TopoDS_Shape V1 = edge;
TopoDS_Shape V2 = myHelper->GetSubShapeByNode( node, meshDS );
- if ( V2.ShapeType() == TopAbs_VERTEX && !V2.IsSame( V1 ))
+ if ( !V2.IsNull() && V2.ShapeType() == TopAbs_VERTEX && !V2.IsSame( V1 ))
{
- TopTools_ListIteratorOfListOfShape ancestIt =
- myHelper->GetMesh()->GetAncestors( V1 );
- for ( ; ancestIt.More(); ancestIt.Next() )
- {
- const TopoDS_Shape & ancestor = ancestIt.Value();
- if ( ancestor.ShapeType() == TopAbs_EDGE )
- for ( TopExp_Explorer e( ancestor, TopAbs_VERTEX ); e.More(); e.Next() )
- if ( V2.IsSame( e.Current() ))
- return TopoDS::Edge( ancestor );
- }
+ TopoDS_Shape ancestor = myHelper->GetCommonAncestor( V1, V2, *myHelper->GetMesh(), TopAbs_EDGE);
+ if ( !ancestor.IsNull() )
+ return TopoDS::Edge( ancestor );
}
return TopoDS_Edge();
}
//================================================================================
/*!
- * \brief Fill block subshapes
+ * \brief Fill block sub-shapes
* \param shapeMap - map to fill in
- * \retval int - nb inserted subshapes
+ * \retval int - nb inserted sub-shapes
*/
//================================================================================
