return nbRemoved;
}
+ //================================================================================
+ /*!
+ * Consider continuous straight EDGES as one side - mark them to unite
+ */
+ //================================================================================
+
+ int countNbSides( const Prism_3D::TPrismTopo & thePrism,
+ vector<int> & nbUnitePerEdge )
+ {
+ int nbEdges = thePrism.myNbEdgesInWires.front(); // nb outer edges
+ int nbSides = nbEdges;
+
+ list< TopoDS_Edge >::const_iterator edgeIt = thePrism.myBottomEdges.begin();
+ std::advance( edgeIt, nbEdges-1 );
+ TopoDS_Edge prevE = *edgeIt;
+ bool isPrevStraight = SMESH_Algo::isStraight( prevE );
+ int iPrev = nbEdges - 1;
+
+ int iUnite = -1; // the first of united EDGEs
+
+ edgeIt = thePrism.myBottomEdges.begin();
+ for ( int iE = 0; iE < nbEdges; ++iE, ++edgeIt )
+ {
+ const TopoDS_Edge& curE = *edgeIt;
+ const bool isCurStraight = SMESH_Algo::isStraight( curE );
+ if ( isPrevStraight && isCurStraight && SMESH_Algo::IsContinuous( prevE, curE ))
+ {
+ if ( iUnite < 0 )
+ iUnite = iPrev;
+ nbUnitePerEdge[ iUnite ]++;
+ nbUnitePerEdge[ iE ] = -1;
+ --nbSides;
+ }
+ else
+ {
+ iUnite = -1;
+ }
+ prevE = curE;
+ isPrevStraight = isCurStraight;
+ iPrev = iE;
+ }
+
+ return nbSides;
+ }
+
+ void pointsToPython(const std::vector<gp_XYZ>& p)
+ {
+#ifdef _DEBUG_
+ for ( int i = SMESH_Block::ID_V000; i < p.size(); ++i )
+ {
+ cout << "mesh.AddNode( " << p[i].X() << ", "<< p[i].Y() << ", "<< p[i].Z() << ") # " << i <<" " ;
+ SMESH_Block::DumpShapeID( i, cout ) << endl;
+ }
+#endif
+ }
} // namespace
//=======================================================================
list< TopoDS_Face > meshedFaces, notQuadMeshedFaces, notQuadFaces;
const bool meshHasQuads = ( theMesh.NbQuadrangles() > 0 );
//StdMeshers_Quadrangle_2D* quadAlgo = TQuadrangleAlgo::instance( this );
- for ( int iF = 1; iF < faceToSolids.Extent(); ++iF )
+ for ( int iF = 1; iF <= faceToSolids.Extent(); ++iF )
{
const TopoDS_Face& face = TopoDS::Face( faceToSolids.FindKey( iF ));
SMESH_subMesh* faceSM = theMesh.GetSubMesh( face );
list< TopoDS_Edge >::iterator edge = thePrism.myBottomEdges.begin();
std::list< int >::iterator nbE = thePrism.myNbEdgesInWires.begin();
int iE = 0;
+ double f,l;
while ( edge != thePrism.myBottomEdges.end() )
{
++iE;
- if ( BRep_Tool::Degenerated( *edge ))
+ if ( BRep_Tool::Curve( *edge, f,l ).IsNull() )
{
edge = thePrism.myBottomEdges.erase( edge );
--iE;
if ( !SMESH_Block::ShellPoint( params, myShapeXYZ, coords ))
return toSM( error("Can't compute coordinates by normalized parameters"));
+ // if ( !meshDS->MeshElements( volumeID ) ||
+ // meshDS->MeshElements( volumeID )->NbNodes() == 0 )
+ // pointsToPython(myShapeXYZ);
SHOWYXZ("TOPFacePoint ",myShapeXYZ[ ID_TOP_FACE]);
SHOWYXZ("BOT Node "<< tBotNode.myNode->GetID(),gpXYZ(tBotNode.myNode));
SHOWYXZ("ShellPoint ",coords);
if ( botSM ) {
if ( ! botSM->GetSubShape().IsSame( thePrism.myBottom )) {
std::swap( botSM, topSM );
- if ( ! botSM->GetSubShape().IsSame( thePrism.myBottom ))
+ if ( !botSM || ! botSM->GetSubShape().IsSame( thePrism.myBottom ))
return toSM( error( COMPERR_BAD_INPUT_MESH,
"Incompatible non-structured sub-meshes"));
}
bool StdMeshers_PrismAsBlock::Init(SMESH_MesherHelper* helper,
const Prism_3D::TPrismTopo& thePrism)
{
+ myHelper = helper;
+ SMESHDS_Mesh* meshDS = myHelper->GetMeshDS();
+ SMESH_Mesh* mesh = myHelper->GetMesh();
+
if ( mySide ) {
delete mySide; mySide = 0;
}
vector< TSideFace* > sideFaces( NB_WALL_FACES, 0 );
vector< pair< double, double> > params( NB_WALL_FACES );
- mySide = new TSideFace( sideFaces, params );
+ mySide = new TSideFace( *mesh, sideFaces, params );
- myHelper = helper;
- SMESHDS_Mesh* meshDS = myHelper->GetMeshDS();
SMESH_Block::init();
myShapeIDMap.Clear();
myParam2ColumnMaps.resize( thePrism.myBottomEdges.size() ); // total nb edges
size_t iE, nbEdges = thePrism.myNbEdgesInWires.front(); // nb outer edges
- vector< double > edgeLength( nbEdges );
+ vector< double > edgeLength( nbEdges );
multimap< double, int > len2edgeMap;
+ // for each EDGE: either split into several parts, or join with several next EDGEs
+ vector<int> nbSplitPerEdge( nbEdges, 0 );
+ vector<int> nbUnitePerEdge( nbEdges, 0 ); // -1 means "joined to a previous"
+
+ // consider continuous straight EDGEs as one side
+ const int nbSides = countNbSides( thePrism, nbUnitePerEdge );
+
list< TopoDS_Edge >::const_iterator edgeIt = thePrism.myBottomEdges.begin();
for ( iE = 0; iE < nbEdges; ++iE, ++edgeIt )
{
edgeLength[ iE ] = SMESH_Algo::EdgeLength( *edgeIt );
- if ( nbEdges < NB_WALL_FACES ) // fill map used to split faces
- {
- SMESHDS_SubMesh* smDS = meshDS->MeshElements( *edgeIt);
- if ( !smDS )
- return error(COMPERR_BAD_INPUT_MESH, TCom("Null submesh on the edge #")
- << MeshDS()->ShapeToIndex( *edgeIt ));
- len2edgeMap.insert( make_pair( edgeLength[ iE ], iE ));
- }
+ if ( nbSides < NB_WALL_FACES ) // fill map used to split faces
+ len2edgeMap.insert( make_pair( edgeLength[ iE ], iE )); // sort edges by length
}
// Load columns of internal edges (forming holes)
// and fill map ShapeIndex to TParam2ColumnMap for them
// Create 4 wall faces of a block
// -------------------------------
- if ( nbEdges <= NB_WALL_FACES ) // ************* Split faces if necessary
+ if ( nbSides <= NB_WALL_FACES ) // ************* Split faces if necessary
{
- map< int, int > iE2nbSplit;
- if ( nbEdges != NB_WALL_FACES ) // define how to split
+ if ( nbSides != NB_WALL_FACES ) // define how to split
{
if ( len2edgeMap.size() != nbEdges )
RETURN_BAD_RESULT("Uniqueness of edge lengths not assured");
double midLen = ( len2edgeMap.size() == 1 ) ? 0 : midLen_i->first;
switch ( nbEdges ) {
case 1: // 0-th edge is split into 4 parts
- iE2nbSplit.insert( make_pair( 0, 4 )); break;
+ nbSplitPerEdge[ 0 ] = 4;
+ break;
case 2: // either the longest edge is split into 3 parts, or both edges into halves
if ( maxLen / 3 > midLen / 2 ) {
- iE2nbSplit.insert( make_pair( maxLen_i->second, 3 ));
+ nbSplitPerEdge[ maxLen_i->second ] = 3;
}
else {
- iE2nbSplit.insert( make_pair( maxLen_i->second, 2 ));
- iE2nbSplit.insert( make_pair( midLen_i->second, 2 ));
+ nbSplitPerEdge[ maxLen_i->second ] = 2;
+ nbSplitPerEdge[ midLen_i->second ] = 2;
}
break;
case 3:
- // split longest into halves
- iE2nbSplit.insert( make_pair( maxLen_i->second, 2 ));
+ if ( nbSides == 2 )
+ // split longest into 3 parts
+ nbSplitPerEdge[ maxLen_i->second ] = 3;
+ else
+ // split longest into halves
+ nbSplitPerEdge[ maxLen_i->second ] = 2;
}
}
- // Create TSideFace's
- int iSide = 0;
- list< TopoDS_Edge >::const_iterator botE = thePrism.myBottomEdges.begin();
- for ( iE = 0; iE < nbEdges; ++iE, ++botE )
+ }
+ else // **************************** Unite faces
+ {
+ int nbExraFaces = nbSides - 3; // nb of faces to fuse
+ for ( iE = 0; iE < nbEdges; ++iE )
{
- TFaceQuadStructPtr quad = thePrism.myWallQuads[ iE ].front();
- // split?
- map< int, int >::iterator i_nb = iE2nbSplit.find( iE );
- if ( i_nb != iE2nbSplit.end() ) {
- // split!
- int nbSplit = i_nb->second;
- vector< double > params;
- splitParams( nbSplit, &myParam2ColumnMaps[ iE ], params );
- const bool isForward =
- StdMeshers_PrismAsBlock::IsForwardEdge( myHelper->GetMeshDS(),
- myParam2ColumnMaps[iE],
- *botE, SMESH_Block::ID_Fx0z );
- for ( int i = 0; i < nbSplit; ++i ) {
- double f = ( isForward ? params[ i ] : params[ nbSplit - i-1 ]);
- double l = ( isForward ? params[ i+1 ] : params[ nbSplit - i ]);
- TSideFace* comp = new TSideFace( myHelper, wallFaceIds[ iSide ],
- thePrism.myWallQuads[ iE ], *botE,
- &myParam2ColumnMaps[ iE ], f, l );
- mySide->SetComponent( iSide++, comp );
- }
+ if ( nbUnitePerEdge[ iE ] < 0 )
+ continue;
+ // look for already united faces
+ for ( int i = iE; i < iE + nbExraFaces; ++i )
+ {
+ if ( nbUnitePerEdge[ i ] > 0 ) // a side including nbUnitePerEdge[i]+1 edge
+ nbExraFaces += nbUnitePerEdge[ i ];
+ nbUnitePerEdge[ i ] = -1;
}
- else {
- TSideFace* comp = new TSideFace( myHelper, wallFaceIds[ iSide ],
+ nbUnitePerEdge[ iE ] = nbExraFaces;
+ break;
+ }
+ }
+
+ // Create TSideFace's
+ int iSide = 0;
+ list< TopoDS_Edge >::const_iterator botE = thePrism.myBottomEdges.begin();
+ for ( iE = 0; iE < nbEdges; ++iE, ++botE )
+ {
+ TFaceQuadStructPtr quad = thePrism.myWallQuads[ iE ].front();
+ const int nbSplit = nbSplitPerEdge[ iE ];
+ const int nbExraFaces = nbUnitePerEdge[ iE ] + 1;
+ if ( nbSplit > 0 ) // split
+ {
+ vector< double > params;
+ splitParams( nbSplit, &myParam2ColumnMaps[ iE ], params );
+ const bool isForward =
+ StdMeshers_PrismAsBlock::IsForwardEdge( myHelper->GetMeshDS(),
+ myParam2ColumnMaps[iE],
+ *botE, SMESH_Block::ID_Fx0z );
+ for ( int i = 0; i < nbSplit; ++i ) {
+ double f = ( isForward ? params[ i ] : params[ nbSplit - i-1 ]);
+ double l = ( isForward ? params[ i+1 ] : params[ nbSplit - i ]);
+ TSideFace* comp = new TSideFace( *mesh, wallFaceIds[ iSide ],
thePrism.myWallQuads[ iE ], *botE,
- &myParam2ColumnMaps[ iE ]);
+ &myParam2ColumnMaps[ iE ], f, l );
mySide->SetComponent( iSide++, comp );
}
}
- }
- else { // **************************** Unite faces
-
- // unite first faces
- int nbExraFaces = nbEdges - 3;
- int iSide = 0, iE;
- double u0 = 0, sumLen = 0;
- for ( iE = 0; iE < nbExraFaces; ++iE )
- sumLen += edgeLength[ iE ];
-
- vector< TSideFace* > components( nbExraFaces );
- vector< pair< double, double> > params( nbExraFaces );
- list< TopoDS_Edge >::const_iterator botE = thePrism.myBottomEdges.begin();
- for ( iE = 0; iE < nbExraFaces; ++iE, ++botE )
+ else if ( nbExraFaces > 1 ) // unite
+ {
+ double u0 = 0, sumLen = 0;
+ for ( int i = iE; i < iE + nbExraFaces; ++i )
+ sumLen += edgeLength[ i ];
+
+ vector< TSideFace* > components( nbExraFaces );
+ vector< pair< double, double> > params( nbExraFaces );
+ bool endReached = false;
+ for ( int i = 0; i < nbExraFaces; ++i, ++botE, ++iE )
+ {
+ if ( iE == nbEdges )
+ {
+ endReached = true;
+ botE = thePrism.myBottomEdges.begin();
+ iE = 0;
+ }
+ components[ i ] = new TSideFace( *mesh, wallFaceIds[ iSide ],
+ thePrism.myWallQuads[ iE ], *botE,
+ &myParam2ColumnMaps[ iE ]);
+ double u1 = u0 + edgeLength[ iE ] / sumLen;
+ params[ i ] = make_pair( u0 , u1 );
+ u0 = u1;
+ }
+ TSideFace* comp = new TSideFace( *mesh, components, params );
+ mySide->SetComponent( iSide++, comp );
+ if ( endReached )
+ break;
+ --iE; // for increment in an external loop on iE
+ --botE;
+ }
+ else if ( nbExraFaces < 0 ) // skip already united face
{
- components[ iE ] = new TSideFace( myHelper, wallFaceIds[ iSide ],
- thePrism.myWallQuads[ iE ], *botE,
- &myParam2ColumnMaps[ iE ]);
- double u1 = u0 + edgeLength[ iE ] / sumLen;
- params[ iE ] = make_pair( u0 , u1 );
- u0 = u1;
}
- mySide->SetComponent( iSide++, new TSideFace( components, params ));
-
- // fill the rest faces
- for ( ; iE < nbEdges; ++iE, ++botE )
+ else // use as is
{
- TSideFace* comp = new TSideFace( myHelper, wallFaceIds[ iSide ],
+ TSideFace* comp = new TSideFace( *mesh, wallFaceIds[ iSide ],
thePrism.myWallQuads[ iE ], *botE,
&myParam2ColumnMaps[ iE ]);
mySide->SetComponent( iSide++, comp );
}
}
-// gp_XYZ testPar(0.25, 0.25, 0), testCoord;
-// if ( !FacePoint( ID_BOT_FACE, testPar, testCoord ))
-// RETURN_BAD_RESULT("TEST FacePoint() FAILED");
-// SHOWYXZ("IN TEST PARAM" , testPar);
-// SHOWYXZ("OUT TEST CORD" , testCoord);
-// if ( !ComputeParameters( testCoord, testPar , ID_BOT_FACE))
-// RETURN_BAD_RESULT("TEST ComputeParameters() FAILED");
-// SHOWYXZ("OUT TEST PARAM" , testPar);
-
+ // double _u[]={ 0.1, 0.1, 0.9, 0.9 };
+ // double _v[]={ 0.1, 0.9, 0.1, 0.9, };
+ // for ( int i = 0; i < 4; ++i )
+ // {
+ // //gp_XYZ testPar(0.25, 0.25, 0), testCoord;
+ // gp_XYZ testPar(_u[i], _v[i], 0), testCoord;
+ // if ( !FacePoint( ID_BOT_FACE, testPar, testCoord ))
+ // RETURN_BAD_RESULT("TEST FacePoint() FAILED");
+ // SHOWYXZ("IN TEST PARAM" , testPar);
+ // SHOWYXZ("OUT TEST CORD" , testCoord);
+ // if ( !ComputeParameters( testCoord, testPar , ID_BOT_FACE))
+ // RETURN_BAD_RESULT("TEST ComputeParameters() FAILED");
+ // SHOWYXZ("OUT TEST PARAM" , testPar);
+ // }
return true;
}
list< TopoDS_Edge >::const_iterator edgeIt = prism.myBottomEdges.begin();
for ( int iE = 0; iE < prism.myNbEdgesInWires.front(); ++iE, ++edgeIt )
{
- if ( BRep_Tool::Degenerated( *edgeIt )) continue;
+ if ( SMESH_Algo::isDegenerated( *edgeIt )) continue;
const TParam2ColumnMap* u2colMap =
GetParam2ColumnMap( MeshDS()->ShapeToIndex( *edgeIt ), isReverse );
if ( !u2colMap ) return false;
*/
//================================================================================
-StdMeshers_PrismAsBlock::TSideFace::TSideFace(SMESH_MesherHelper* helper,
+StdMeshers_PrismAsBlock::TSideFace::TSideFace(SMESH_Mesh& mesh,
const int faceID,
const Prism_3D::TQuadList& quadList,
const TopoDS_Edge& baseEdge,
const double last):
myID( faceID ),
myParamToColumnMap( columnsMap ),
- myHelper( helper )
+ myHelper( mesh )
{
myParams.resize( 1 );
myParams[ 0 ] = make_pair( first, last );
mySurface = PSurface( new BRepAdaptor_Surface( quadList.front()->face ));
myBaseEdge = baseEdge;
- myIsForward = StdMeshers_PrismAsBlock::IsForwardEdge( myHelper->GetMeshDS(),
+ myIsForward = StdMeshers_PrismAsBlock::IsForwardEdge( myHelper.GetMeshDS(),
*myParamToColumnMap,
myBaseEdge, myID );
+ myHelper.SetSubShape( quadList.front()->face );
+
if ( quadList.size() > 1 ) // side is vertically composite
{
// fill myShapeID2Surf map to enable finding a right surface by any sub-shape ID
- SMESHDS_Mesh* meshDS = myHelper->GetMeshDS();
+ SMESHDS_Mesh* meshDS = myHelper.GetMeshDS();
TopTools_IndexedDataMapOfShapeListOfShape subToFaces;
Prism_3D::TQuadList::const_iterator quad = quadList.begin();
//================================================================================
/*!
- * \brief Constructor of complex side face
+ * \brief Constructor of a complex side face
*/
//================================================================================
StdMeshers_PrismAsBlock::TSideFace::
-TSideFace(const vector< TSideFace* >& components,
+TSideFace(SMESH_Mesh& mesh,
+ const vector< TSideFace* >& components,
const vector< pair< double, double> > & params)
:myID( components[0] ? components[0]->myID : 0 ),
myParamToColumnMap( 0 ),
myParams( params ),
myIsForward( true ),
myComponents( components ),
- myHelper( components[0] ? components[0]->myHelper : 0 )
-{}
+ myHelper( mesh )
+{
+ if ( myID == ID_Fx1z || myID == ID_F0yz )
+ {
+ // reverse components
+ std::reverse( myComponents.begin(), myComponents.end() );
+ std::reverse( myParams.begin(), myParams.end() );
+ for ( size_t i = 0; i < myParams.size(); ++i )
+ {
+ const double f = myParams[i].first;
+ const double l = myParams[i].second;
+ myParams[i] = make_pair( 1. - l, 1. - f );
+ }
+ }
+}
//================================================================================
/*!
* \brief Copy constructor
*/
//================================================================================
-StdMeshers_PrismAsBlock::TSideFace::TSideFace( const TSideFace& other )
+StdMeshers_PrismAsBlock::TSideFace::TSideFace( const TSideFace& other ):
+ myID ( other.myID ),
+ myParamToColumnMap ( other.myParamToColumnMap ),
+ mySurface ( other.mySurface ),
+ myBaseEdge ( other.myBaseEdge ),
+ myShapeID2Surf ( other.myShapeID2Surf ),
+ myParams ( other.myParams ),
+ myIsForward ( other.myIsForward ),
+ myComponents ( other.myComponents.size() ),
+ myHelper ( *other.myHelper.GetMesh() )
{
- myID = other.myID;
- mySurface = other.mySurface;
- myBaseEdge = other.myBaseEdge;
- myParams = other.myParams;
- myIsForward = other.myIsForward;
- myHelper = other.myHelper;
- myParamToColumnMap = other.myParamToColumnMap;
-
- myComponents.resize( other.myComponents.size());
for (int i = 0 ; i < myComponents.size(); ++i )
myComponents[ i ] = new TSideFace( *other.myComponents[ i ]);
}
}
else
{
- TopoDS_Shape s = myHelper->GetSubShapeByNode( nn[0], myHelper->GetMeshDS() );
+ TopoDS_Shape s = myHelper.GetSubShapeByNode( nn[0], myHelper.GetMeshDS() );
if ( s.ShapeType() != TopAbs_EDGE )
- s = myHelper->GetSubShapeByNode( nn[2], myHelper->GetMeshDS() );
+ s = myHelper.GetSubShapeByNode( nn[2], myHelper.GetMeshDS() );
if ( s.ShapeType() == TopAbs_EDGE )
edge = TopoDS::Edge( s );
}
if ( !edge.IsNull() )
{
- double u1 = myHelper->GetNodeU( edge, nn[0] );
- double u3 = myHelper->GetNodeU( edge, nn[2] );
+ double u1 = myHelper.GetNodeU( edge, nn[0] );
+ double u3 = myHelper.GetNodeU( edge, nn[2] );
double u = u1 * ( 1 - hR ) + u3 * hR;
TopLoc_Location loc; double f,l;
Handle(Geom_Curve) curve = BRep_Tool::Curve( edge,loc,f,l );
}
if ( notFaceID2 ) // no nodes of FACE and nodes are on different FACEs
{
- SMESHDS_Mesh* meshDS = myHelper->GetMeshDS();
- TopoDS_Shape face = myHelper->GetCommonAncestor( meshDS->IndexToShape( notFaceID1 ),
+ SMESHDS_Mesh* meshDS = myHelper.GetMeshDS();
+ TopoDS_Shape face = myHelper.GetCommonAncestor( meshDS->IndexToShape( notFaceID1 ),
meshDS->IndexToShape( notFaceID2 ),
- *myHelper->GetMesh(),
+ *myHelper.GetMesh(),
TopAbs_FACE );
if ( face.IsNull() )
throw SALOME_Exception("StdMeshers_PrismAsBlock::TSideFace::Value() face.IsNull()");
throw SALOME_Exception("StdMeshers_PrismAsBlock::TSideFace::Value() !mySurface");
}
}
-
- gp_XY uv1 = myHelper->GetNodeUV( mySurface->Face(), nn[0], nn[2]);
- gp_XY uv2 = myHelper->GetNodeUV( mySurface->Face(), nn[1], nn[3]);
+ ((TSideFace*) this)->myHelper.SetSubShape( mySurface->Face() );
+
+ gp_XY uv1 = myHelper.GetNodeUV( mySurface->Face(), nn[0], nn[2]);
+ gp_XY uv2 = myHelper.GetNodeUV( mySurface->Face(), nn[1], nn[3]);
gp_XY uv12 = uv1 * ( 1 - vR ) + uv2 * vR;
- gp_XY uv3 = myHelper->GetNodeUV( mySurface->Face(), nn[2], nn[0]);
- gp_XY uv4 = myHelper->GetNodeUV( mySurface->Face(), nn[3], nn[1]);
+ gp_XY uv3 = myHelper.GetNodeUV( mySurface->Face(), nn[2], nn[0]);
+ gp_XY uv4 = myHelper.GetNodeUV( mySurface->Face(), nn[3], nn[1]);
gp_XY uv34 = uv3 * ( 1 - vR ) + uv4 * vR;
gp_XY uv = uv12 * ( 1 - hR ) + uv34 * hR;
}
TopoDS_Shape edge;
const SMDS_MeshNode* node = 0;
- SMESHDS_Mesh * meshDS = myHelper->GetMesh()->GetMeshDS();
+ SMESHDS_Mesh * meshDS = myHelper.GetMesh()->GetMeshDS();
TNodeColumn* column;
switch ( iEdge ) {
case BOTTOM_EDGE:
column = & (( ++myParamToColumnMap->begin())->second );
node = ( iEdge == TOP_EDGE ) ? column->back() : column->front();
- edge = myHelper->GetSubShapeByNode ( node, meshDS );
+ edge = myHelper.GetSubShapeByNode ( node, meshDS );
if ( edge.ShapeType() == TopAbs_VERTEX ) {
column = & ( myParamToColumnMap->begin()->second );
node = ( iEdge == TOP_EDGE ) ? column->back() : column->front();
else
column = & ( myParamToColumnMap->begin()->second );
if ( column->size() > 0 )
- edge = myHelper->GetSubShapeByNode( (*column)[ 1 ], meshDS );
+ edge = myHelper.GetSubShapeByNode( (*column)[ 1 ], meshDS );
if ( edge.IsNull() || edge.ShapeType() == TopAbs_VERTEX )
node = column->front();
break;
// find edge by 2 vertices
TopoDS_Shape V1 = edge;
- TopoDS_Shape V2 = myHelper->GetSubShapeByNode( node, meshDS );
+ TopoDS_Shape V2 = myHelper.GetSubShapeByNode( node, meshDS );
if ( !V2.IsNull() && V2.ShapeType() == TopAbs_VERTEX && !V2.IsSame( V1 ))
{
- TopoDS_Shape ancestor = myHelper->GetCommonAncestor( V1, V2, *myHelper->GetMesh(), TopAbs_EDGE);
+ TopoDS_Shape ancestor = myHelper.GetCommonAncestor( V1, V2, *myHelper.GetMesh(), TopAbs_EDGE);
if ( !ancestor.IsNull() )
return TopoDS::Edge( ancestor );
}
GetColumns(0, col1, col2 );
const SMDS_MeshNode* node0 = col1->second.front();
const SMDS_MeshNode* node1 = col1->second.back();
- TopoDS_Shape v0 = myHelper->GetSubShapeByNode( node0, myHelper->GetMeshDS());
- TopoDS_Shape v1 = myHelper->GetSubShapeByNode( node1, myHelper->GetMeshDS());
+ TopoDS_Shape v0 = myHelper.GetSubShapeByNode( node0, myHelper.GetMeshDS());
+ TopoDS_Shape v1 = myHelper.GetSubShapeByNode( node1, myHelper.GetMeshDS());
if ( v0.ShapeType() == TopAbs_VERTEX ) {
nbInserted += SMESH_Block::Insert( v0, vertIdVec[ 0 ], shapeMap);
}
GetColumns(1, col1, col2 );
node0 = col2->second.front();
node1 = col2->second.back();
- v0 = myHelper->GetSubShapeByNode( node0, myHelper->GetMeshDS());
- v1 = myHelper->GetSubShapeByNode( node1, myHelper->GetMeshDS());
+ v0 = myHelper.GetSubShapeByNode( node0, myHelper.GetMeshDS());
+ v1 = myHelper.GetSubShapeByNode( node1, myHelper.GetMeshDS());
if ( v0.ShapeType() == TopAbs_VERTEX ) {
nbInserted += SMESH_Block::Insert( v0, vertIdVec[ 0 ], shapeMap);
}
{
TParam2ColumnIt u_col1, u_col2;
double r = mySide->GetColumns( U, u_col1, u_col2 );
- gp_XY uv1 = mySide->GetNodeUV( myFace, u_col1->second[ myZ ]);
- gp_XY uv2 = mySide->GetNodeUV( myFace, u_col2->second[ myZ ]);
+ gp_XY uv1 = mySide->GetNodeUV( myFace, u_col1->second[ myZ ], u_col2->second[ myZ ]);
+ gp_XY uv2 = mySide->GetNodeUV( myFace, u_col2->second[ myZ ], u_col1->second[ myZ ]);
return uv1 * ( 1 - r ) + uv2 * r;
}