## @defgroup l2_modif_tofromqu Convert to/from Quadratic Mesh
## @}
+## @defgroup l1_measurements Measurements
import salome
import geompyDC
# TopAbs_State enumeration
[TopAbs_IN, TopAbs_OUT, TopAbs_ON, TopAbs_UNKNOWN] = range(4)
+# Methods of splitting a hexahedron into tetrahedra
+Hex_5Tet, Hex_6Tet, Hex_24Tet = 1, 2, 3
## Converts an angle from degrees to radians
def DegreesToRadians(AngleInDegrees):
def EnumToLong(self,theItem):
return theItem._v
+ ## Returns a string representation of the color.
+ # To be used with filters.
+ # @param c color value (SALOMEDS.Color)
+ # @ingroup l1_controls
+ def ColorToString(self,c):
+ val = ""
+ if isinstance(c, SALOMEDS.Color):
+ val = "%s;%s;%s" % (c.R, c.G, c.B)
+ elif isinstance(c, str):
+ val = c
+ else:
+ raise ValueError, "Color value should be of string or SALOMEDS.Color type"
+ return val
+
## Gets PointStruct from vertex
# @param theVertex a GEOM object(vertex)
# @return SMESH.PointStruct
def Concatenate( self, meshes, uniteIdenticalGroups,
mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False):
mergeTolerance,Parameters = geompyDC.ParseParameters(mergeTolerance)
+ for i,m in enumerate(meshes):
+ if isinstance(m, Mesh):
+ meshes[i] = m.GetMesh()
if allGroups:
aSmeshMesh = SMESH._objref_SMESH_Gen.ConcatenateWithGroups(
self,meshes,uniteIdenticalGroups,mergeNodesAndElements,mergeTolerance)
else:
print "Error: The treshold should be a string."
return None
+ elif CritType == FT_ElemGeomType:
+ # Checks the treshold
+ try:
+ aCriterion.Threshold = self.EnumToLong(aTreshold)
+ except:
+ if isinstance(aTreshold, int):
+ aCriterion.Threshold = aTreshold
+ else:
+ print "Error: The treshold should be an integer or SMESH.GeometryType."
+ return None
+ pass
+ pass
+ elif CritType == FT_GroupColor:
+ # Checks the treshold
+ try:
+ aCriterion.ThresholdStr = self.ColorToString(aTreshold)
+ except:
+ print "Error: The threshold value should be of SALOMEDS.Color type"
+ return None
+ pass
elif CritType in [FT_FreeBorders, FT_FreeEdges, FT_BadOrientedVolume, FT_FreeNodes,
- FT_FreeFaces, FT_ElemGeomType, FT_GroupColor]:
+ FT_FreeFaces, FT_LinearOrQuadratic,
+ FT_BareBorderFace, FT_BareBorderVolume]:
# At this point the treshold is unnecessary
if aTreshold == FT_LogicalNOT:
aCriterion.UnaryOp = self.EnumToLong(FT_LogicalNOT)
aCriteria = []
aCriteria.append(aCriterion)
aFilter.SetCriteria(aCriteria)
+ aFilterMgr.Destroy()
return aFilter
## Creates a numerical functor by its type
return aFilterMgr.CreateArea()
elif theCriterion == FT_Volume3D:
return aFilterMgr.CreateVolume3D()
+ elif theCriterion == FT_MaxElementLength2D:
+ return aFilterMgr.CreateMaxElementLength2D()
+ elif theCriterion == FT_MaxElementLength3D:
+ return aFilterMgr.CreateMaxElementLength3D()
elif theCriterion == FT_MultiConnection:
return aFilterMgr.CreateMultiConnection()
elif theCriterion == FT_MultiConnection2D:
pass
return d
+ ## Get minimum distance between two objects
+ #
+ # If @a src2 is None, and @a id2 = 0, distance from @a src1 / @a id1 to the origin is computed.
+ # If @a src2 is None, and @a id2 != 0, it is assumed that both @a id1 and @a id2 belong to @a src1.
+ #
+ # @param src1 first source object
+ # @param src2 second source object
+ # @param id1 node/element id from the first source
+ # @param id2 node/element id from the second (or first) source
+ # @param isElem1 @c True if @a id1 is element id, @c False if it is node id
+ # @param isElem2 @c True if @a id2 is element id, @c False if it is node id
+ # @return minimum distance value
+ # @sa GetMinDistance()
+ # @ingroup l1_measurements
+ def MinDistance(self, src1, src2=None, id1=0, id2=0, isElem1=False, isElem2=False):
+ result = self.GetMinDistance(src1, src2, id1, id2, isElem1, isElem2)
+ if result is None:
+ result = 0.0
+ else:
+ result = result.value
+ return result
+
+ ## Get measure structure specifying minimum distance data between two objects
+ #
+ # If @a src2 is None, and @a id2 = 0, distance from @a src1 / @a id1 to the origin is computed.
+ # If @a src2 is None, and @a id2 != 0, it is assumed that both @a id1 and @a id2 belong to @a src1.
+ #
+ # @param src1 first source object
+ # @param src2 second source object
+ # @param id1 node/element id from the first source
+ # @param id2 node/element id from the second (or first) source
+ # @param isElem1 @c True if @a id1 is element id, @c False if it is node id
+ # @param isElem2 @c True if @a id2 is element id, @c False if it is node id
+ # @return Measure structure or None if input data is invalid
+ # @sa MinDistance()
+ # @ingroup l1_measurements
+ def GetMinDistance(self, src1, src2=None, id1=0, id2=0, isElem1=False, isElem2=False):
+ if isinstance(src1, Mesh): src1 = src1.mesh
+ if isinstance(src2, Mesh): src2 = src2.mesh
+ if src2 is None and id2 != 0: src2 = src1
+ if not hasattr(src1, "_narrow"): return None
+ src1 = src1._narrow(SMESH.SMESH_IDSource)
+ if not src1: return None
+ if id1 != 0:
+ m = src1.GetMesh()
+ e = m.GetMeshEditor()
+ if isElem1:
+ src1 = e.MakeIDSource([id1], SMESH.FACE)
+ else:
+ src1 = e.MakeIDSource([id1], SMESH.NODE)
+ pass
+ if hasattr(src2, "_narrow"):
+ src2 = src2._narrow(SMESH.SMESH_IDSource)
+ if src2 and id2 != 0:
+ m = src2.GetMesh()
+ e = m.GetMeshEditor()
+ if isElem2:
+ src2 = e.MakeIDSource([id2], SMESH.FACE)
+ else:
+ src2 = e.MakeIDSource([id2], SMESH.NODE)
+ pass
+ pass
+ aMeasurements = self.CreateMeasurements()
+ result = aMeasurements.MinDistance(src1, src2)
+ aMeasurements.Destroy()
+ return result
+
+ ## Get bounding box of the specified object(s)
+ # @param objects single source object or list of source objects
+ # @return tuple of six values (minX, minY, minZ, maxX, maxY, maxZ)
+ # @sa GetBoundingBox()
+ # @ingroup l1_measurements
+ def BoundingBox(self, objects):
+ result = self.GetBoundingBox(objects)
+ if result is None:
+ result = (0.0,)*6
+ else:
+ result = (result.minX, result.minY, result.minZ, result.maxX, result.maxY, result.maxZ)
+ return result
+
+ ## Get measure structure specifying bounding box data of the specified object(s)
+ # @param objects single source object or list of source objects
+ # @return Measure structure
+ # @sa BoundingBox()
+ # @ingroup l1_measurements
+ def GetBoundingBox(self, objects):
+ if isinstance(objects, tuple):
+ objects = list(objects)
+ if not isinstance(objects, list):
+ objects = [objects]
+ srclist = []
+ for o in objects:
+ if isinstance(o, Mesh):
+ srclist.append(o.mesh)
+ elif hasattr(o, "_narrow"):
+ src = o._narrow(SMESH.SMESH_IDSource)
+ if src: srclist.append(src)
+ pass
+ pass
+ aMeasurements = self.CreateMeasurements()
+ result = aMeasurements.BoundingBox(srclist)
+ aMeasurements.Destroy()
+ return result
+
import omniORB
#Registering the new proxy for SMESH_Gen
omniORB.registerObjref(SMESH._objref_SMESH_Gen._NP_RepositoryId, smeshDC)
else:
return Mesh_Segment(self, geom)
+ ## Creates 1D algorithm importing segments conatined in groups of other mesh.
+ # If the optional \a geom parameter is not set, this algorithm is global.
+ # Otherwise, this algorithm defines a submesh based on \a geom subshape.
+ # @param geom If defined the subshape is to be meshed
+ # @return an instance of Mesh_UseExistingElements class
+ # @ingroup l3_algos_basic
+ def UseExisting1DElements(self, geom=0):
+ return Mesh_UseExistingElements(1,self, geom)
+
+ ## Creates 2D algorithm importing faces conatined in groups of other mesh.
+ # If the optional \a geom parameter is not set, this algorithm is global.
+ # Otherwise, this algorithm defines a submesh based on \a geom subshape.
+ # @param geom If defined the subshape is to be meshed
+ # @return an instance of Mesh_UseExistingElements class
+ # @ingroup l3_algos_basic
+ def UseExisting2DElements(self, geom=0):
+ return Mesh_UseExistingElements(2,self, geom)
+
## Enables creation of nodes and segments usable by 2D algoritms.
# The added nodes and segments must be bound to edges and vertices by
# SetNodeOnVertex(), SetNodeOnEdge() and SetMeshElementOnShape()
return Mesh_RadialPrism3D(self, geom)
## Evaluates size of prospective mesh on a shape
- # @return True or False
+ # @return a list where i-th element is a number of elements of i-th SMESH.EntityType
+ # To know predicted number of e.g. edges, inquire it this way
+ # Evaluate()[ EnumToLong( Entity_Edge )]
def Evaluate(self, geom=0):
if geom == 0 or not isinstance(geom, geompyDC.GEOM._objref_GEOM_Object):
if self.geom == 0:
## Computes the mesh and returns the status of the computation
+ # @param geom geomtrical shape on which mesh data should be computed
# @param discardModifs if True and the mesh has been edited since
# a last total re-compute and that may prevent successful partial re-compute,
# then the mesh is cleaned before Compute()
def Group(self, grp, name=""):
return self.GroupOnGeom(grp, name)
- ## Deprecated, used only for compatibility! Please, use ExportMED() method instead.
+ ## Deprecated, used only for compatibility! Please, use ExportToMEDX() method instead.
# Exports the mesh in a file in MED format and chooses the \a version of MED format
+ ## allowing to overwrite the file if it exists or add the exported data to its contents
# @param f the file name
# @param version values are SMESH.MED_V2_1, SMESH.MED_V2_2
# @param opt boolean parameter for creating/not creating
# the groups Group_On_All_Nodes, Group_On_All_Faces, ...
+ # @param overwrite boolean parameter for overwriting/not overwriting the file
# @ingroup l2_impexp
- def ExportToMED(self, f, version, opt=0):
- self.mesh.ExportToMED(f, opt, version)
+ def ExportToMED(self, f, version, opt=0, overwrite=1):
+ self.mesh.ExportToMEDX(f, opt, version, overwrite)
- ## Exports the mesh in a file in MED format
+ ## Exports the mesh in a file in MED format and chooses the \a version of MED format
+ ## allowing to overwrite the file if it exists or add the exported data to its contents
# @param f is the file name
# @param auto_groups boolean parameter for creating/not creating
# the groups Group_On_All_Nodes, Group_On_All_Faces, ... ;
# the typical use is auto_groups=false.
# @param version MED format version(MED_V2_1 or MED_V2_2)
+ # @param overwrite boolean parameter for overwriting/not overwriting the file
# @ingroup l2_impexp
- def ExportMED(self, f, auto_groups=0, version=MED_V2_2):
- self.mesh.ExportToMED(f, auto_groups, version)
+ def ExportMED(self, f, auto_groups=0, version=MED_V2_2, overwrite=1):
+ self.mesh.ExportToMEDX(f, auto_groups, version, overwrite)
## Exports the mesh in a file in DAT format
# @param f the file name
aCriteria.append(Criterion)
aFilter.SetCriteria(aCriteria)
group = self.MakeGroupByFilter(groupName, aFilter)
+ aFilterMgr.Destroy()
return group
## Creates a mesh group by the given criteria (list of criteria)
aFilter = aFilterMgr.CreateFilter()
aFilter.SetCriteria(theCriteria)
group = self.MakeGroupByFilter(groupName, aFilter)
+ aFilterMgr.Destroy()
return group
## Creates a mesh group by the given filter
aPredicate = aFilterMgr.CreateFreeEdges()
aPredicate.SetMesh(self.mesh)
aBorders = aPredicate.GetBorders()
+ aFilterMgr.Destroy()
return aBorders
## Removes a group
return self.mesh.GetElementsId()
## Returns the list of IDs of mesh elements with the given type
- # @param elementType the required type of elements
+ # @param elementType the required type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME)
# @return list of integer values
# @ingroup l1_meshinfo
def GetElementsByType(self, elementType):
return self.mesh.BaryCenter(id)
+ # Get mesh measurements information:
+ # ------------------------------------
+
+ ## Get minimum distance between two nodes, elements or distance to the origin
+ # @param id1 first node/element id
+ # @param id2 second node/element id (if 0, distance from @a id1 to the origin is computed)
+ # @param isElem1 @c True if @a id1 is element id, @c False if it is node id
+ # @param isElem2 @c True if @a id2 is element id, @c False if it is node id
+ # @return minimum distance value
+ # @sa GetMinDistance()
+ def MinDistance(self, id1, id2=0, isElem1=False, isElem2=False):
+ aMeasure = self.GetMinDistance(id1, id2, isElem1, isElem2)
+ return aMeasure.value
+
+ ## Get measure structure specifying minimum distance data between two objects
+ # @param id1 first node/element id
+ # @param id2 second node/element id (if 0, distance from @a id1 to the origin is computed)
+ # @param isElem1 @c True if @a id1 is element id, @c False if it is node id
+ # @param isElem2 @c True if @a id2 is element id, @c False if it is node id
+ # @return Measure structure
+ # @sa MinDistance()
+ def GetMinDistance(self, id1, id2=0, isElem1=False, isElem2=False):
+ if isElem1:
+ id1 = self.editor.MakeIDSource([id1], SMESH.FACE)
+ else:
+ id1 = self.editor.MakeIDSource([id1], SMESH.NODE)
+ if id2 != 0:
+ if isElem2:
+ id2 = self.editor.MakeIDSource([id2], SMESH.FACE)
+ else:
+ id2 = self.editor.MakeIDSource([id2], SMESH.NODE)
+ pass
+ else:
+ id2 = None
+
+ aMeasurements = self.smeshpyD.CreateMeasurements()
+ aMeasure = aMeasurements.MinDistance(id1, id2)
+ aMeasurements.Destroy()
+ return aMeasure
+
+ ## Get bounding box of the specified object(s)
+ # @param objects single source object or list of source objects or list of nodes/elements IDs
+ # @param isElem if @a objects is a list of IDs, @c True value in this parameters specifies that @a objects are elements,
+ # @c False specifies that @a objects are nodes
+ # @return tuple of six values (minX, minY, minZ, maxX, maxY, maxZ)
+ # @sa GetBoundingBox()
+ def BoundingBox(self, objects=None, isElem=False):
+ result = self.GetBoundingBox(objects, isElem)
+ if result is None:
+ result = (0.0,)*6
+ else:
+ result = (result.minX, result.minY, result.minZ, result.maxX, result.maxY, result.maxZ)
+ return result
+
+ ## Get measure structure specifying bounding box data of the specified object(s)
+ # @param objects single source object or list of source objects or list of nodes/elements IDs
+ # @param isElem if @a objects is a list of IDs, @c True value in this parameters specifies that @a objects are elements,
+ # @c False specifies that @a objects are nodes
+ # @return Measure structure
+ # @sa BoundingBox()
+ def GetBoundingBox(self, IDs=None, isElem=False):
+ if IDs is None:
+ IDs = [self.mesh]
+ elif isinstance(IDs, tuple):
+ IDs = list(IDs)
+ if not isinstance(IDs, list):
+ IDs = [IDs]
+ if len(IDs) > 0 and isinstance(IDs[0], int):
+ IDs = [IDs]
+ srclist = []
+ for o in IDs:
+ if isinstance(o, Mesh):
+ srclist.append(o.mesh)
+ elif hasattr(o, "_narrow"):
+ src = o._narrow(SMESH.SMESH_IDSource)
+ if src: srclist.append(src)
+ pass
+ elif isinstance(o, list):
+ if isElem:
+ srclist.append(self.editor.MakeIDSource(o, SMESH.FACE))
+ else:
+ srclist.append(self.editor.MakeIDSource(o, SMESH.NODE))
+ pass
+ pass
+ aMeasurements = self.smeshpyD.CreateMeasurements()
+ aMeasure = aMeasurements.BoundingBox(srclist)
+ aMeasurements.Destroy()
+ return aMeasure
+
# Mesh edition (SMESH_MeshEditor functionality):
# ---------------------------------------------
def RemoveNodes(self, IDsOfNodes):
return self.editor.RemoveNodes(IDsOfNodes)
+ ## Removes all orphan (free) nodes from mesh
+ # @return number of the removed nodes
+ # @ingroup l2_modif_del
+ def RemoveOrphanNodes(self):
+ return self.editor.RemoveOrphanNodes()
+
## Add a node to the mesh by coordinates
# @return Id of the new node
# @ingroup l2_modif_add
## Splits volumic elements into tetrahedrons
# @param elemIDs either list of elements or mesh or group or submesh
- # @param method flags passing splitting method:
- # 1 - split the hexahedron into 5 tetrahedrons
- # 2 - split the hexahedron into 6 tetrahedrons
+ # @param method flags passing splitting method: Hex_5Tet, Hex_6Tet, Hex_24Tet
+ # Hex_5Tet - split the hexahedron into 5 tetrahedrons, etc
# @ingroup l2_modif_cutquadr
- def SplitVolumesIntoTetra(self, elemIDs, method=1 ):
+ def SplitVolumesIntoTetra(self, elemIDs, method=Hex_5Tet ):
if isinstance( elemIDs, Mesh ):
elemIDs = elemIDs.GetMesh()
self.editor.SplitVolumesIntoTetra(elemIDs, method)
## Converts the mesh to quadratic, deletes old elements, replacing
# them with quadratic with the same id.
+ # @param theForce3d new node creation method:
+ # 0 - the medium node lies at the geometrical edge from which the mesh element is built
+ # 1 - the medium node lies at the middle of the line segments connecting start and end node of a mesh element
# @ingroup l2_modif_tofromqu
def ConvertToQuadratic(self, theForce3d):
self.editor.ConvertToQuadratic(theForce3d)
## Scales the object
# @param theObject - the object to translate (mesh, submesh, or group)
# @param thePoint - base point for scale
- # @param theScaleFact - scale factors for axises
+ # @param theScaleFact - list of 1-3 scale factors for axises
# @param Copy - allows copying the translated elements
# @param MakeGroups - forces the generation of new groups from existing
# ones (if Copy)
if ( isinstance( theObject, Mesh )):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
- theObject = self.editor.MakeIDSource(theObject)
+ theObject = self.editor.MakeIDSource(theObject, SMESH.ALL)
thePoint, Parameters = ParsePointStruct(thePoint)
self.mesh.SetParameters(Parameters)
## Creates a new mesh from the translated object
# @param theObject - the object to translate (mesh, submesh, or group)
# @param thePoint - base point for scale
- # @param theScaleFact - scale factors for axises
+ # @param theScaleFact - list of 1-3 scale factors for axises
# @param MakeGroups - forces the generation of new groups from existing ones
# @param NewMeshName - the name of the newly created mesh
# @return instance of Mesh class
if (isinstance(theObject, Mesh)):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
- theObject = self.editor.MakeIDSource(theObject)
+ theObject = self.editor.MakeIDSource(theObject,SMESH.ALL)
mesh = self.editor.ScaleMakeMesh(theObject, thePoint, theScaleFact,
MakeGroups, NewMeshName)
## Finds groups of ajacent nodes within Tolerance.
# @param Tolerance the value of tolerance
# @param SubMeshOrGroup SubMesh or Group
+ # @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search
# @return the list of groups of nodes
# @ingroup l2_modif_trsf
- def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance):
- return self.editor.FindCoincidentNodesOnPart(SubMeshOrGroup, Tolerance)
+ def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[]):
+ if (isinstance( SubMeshOrGroup, Mesh )):
+ SubMeshOrGroup = SubMeshOrGroup.GetMesh()
+ if not isinstance( ExceptSubMeshOrGroups, list):
+ ExceptSubMeshOrGroups = [ ExceptSubMeshOrGroups ]
+ if ExceptSubMeshOrGroups and isinstance( ExceptSubMeshOrGroups[0], int):
+ ExceptSubMeshOrGroups = [ self.editor.MakeIDSource( ExceptSubMeshOrGroups, SMESH.NODE)]
+ return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,ExceptSubMeshOrGroups)
## Merges nodes
# @param GroupsOfNodes the list of groups of nodes
# This method provided for convenience works as DoubleNodes() described above.
# @param theNodes group of nodes to be doubled
# @param theModifiedElems group of elements to be updated.
- # @return TRUE if operation has been completed successfully, FALSE otherwise
+ # @param theMakeGroup forces the generation of a group containing new nodes.
+ # @return TRUE or a created group if operation has been completed successfully,
+ # FALSE or None otherwise
# @ingroup l2_modif_edit
- def DoubleNodeGroup(self, theNodes, theModifiedElems):
+ def DoubleNodeGroup(self, theNodes, theModifiedElems, theMakeGroup=False):
+ if theMakeGroup:
+ return self.editor.DoubleNodeGroupNew(theNodes, theModifiedElems)
return self.editor.DoubleNodeGroup(theNodes, theModifiedElems)
-
+
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
# @param theNodes list of groups of nodes to be doubled
# @param theNodesNot - group of nodes not to replicated
# @param theAffectedElems - group of elements to which the replicated nodes
# should be associated to.
+ # @param theMakeGroup forces the generation of a group containing new elements.
# @ingroup l2_modif_edit
- def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems):
+ def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems, theMakeGroup=False):
+ if theMakeGroup:
+ return self.editor.DoubleNodeElemGroupNew(theElems, theNodesNot, theAffectedElems)
return self.editor.DoubleNodeElemGroup(theElems, theNodesNot, theAffectedElems)
-
+
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
# @param theElems - group of of elements (edges or faces) to be replicated
def DoubleNodeElemGroupsInRegion(self, theElems, theNodesNot, theShape):
return self.editor.DoubleNodeElemGroupsInRegion(theElems, theNodesNot, theShape)
+ def _valueFromFunctor(self, funcType, elemId):
+ fn = self.smeshpyD.GetFunctor(funcType)
+ fn.SetMesh(self.mesh)
+ if fn.GetElementType() == self.GetElementType(elemId, True):
+ val = fn.GetValue(elemId)
+ else:
+ val = 0
+ return val
+
+ ## Get length of 1D element.
+ # @param elemId mesh element ID
+ # @return element's length value
+ # @ingroup l1_measurements
+ def GetLength(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Length, elemId)
+
+ ## Get area of 2D element.
+ # @param elemId mesh element ID
+ # @return element's area value
+ # @ingroup l1_measurements
+ def GetArea(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Area, elemId)
+
+ ## Get volume of 3D element.
+ # @param elemId mesh element ID
+ # @return element's volume value
+ # @ingroup l1_measurements
+ def GetVolume(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+
+ ## Get maximum element length.
+ # @param elemId mesh element ID
+ # @return element's maximum length value
+ # @ingroup l1_measurements
+ def GetMaxElementLength(self, elemId):
+ if self.GetElementType(elemId, True) == SMESH.VOLUME:
+ ftype = SMESH.FT_MaxElementLength3D
+ else:
+ ftype = SMESH.FT_MaxElementLength2D
+ return self._valueFromFunctor(ftype, elemId)
+
+ ## Get aspect ratio of 2D or 3D element.
+ # @param elemId mesh element ID
+ # @return element's aspect ratio value
+ # @ingroup l1_measurements
+ def GetAspectRatio(self, elemId):
+ if self.GetElementType(elemId, True) == SMESH.VOLUME:
+ ftype = SMESH.FT_AspectRatio3D
+ else:
+ ftype = SMESH.FT_AspectRatio
+ return self._valueFromFunctor(ftype, elemId)
+
+ ## Get warping angle of 2D element.
+ # @param elemId mesh element ID
+ # @return element's warping angle value
+ # @ingroup l1_measurements
+ def GetWarping(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Warping, elemId)
+
+ ## Get minimum angle of 2D element.
+ # @param elemId mesh element ID
+ # @return element's minimum angle value
+ # @ingroup l1_measurements
+ def GetMinimumAngle(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_MinimumAngle, elemId)
+
+ ## Get taper of 2D element.
+ # @param elemId mesh element ID
+ # @return element's taper value
+ # @ingroup l1_measurements
+ def GetTaper(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Taper, elemId)
+
+ ## Get skew of 2D element.
+ # @param elemId mesh element ID
+ # @return element's skew value
+ # @ingroup l1_measurements
+ def GetSkew(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Skew, elemId)
+
## The mother class to define algorithm, it is not recommended to use it directly.
#
# More details.
self.Parameters().SetPhyMax(theVal)
## Sets a way to define maximum angular deflection of mesh from CAD model.
- # @param theGeometricMesh is: DefaultGeom or Custom
+ # @param theGeometricMesh is: 0 (None) or 1 (Custom)
# @ingroup l3_hypos_blsurf
def SetGeometricMesh(self, theGeometricMesh=0):
# Parameter of BLSURF algo
return hyp
+# Public class: Mesh_UseExistingElements
+# --------------------------------------
+## Defines a Radial Quadrangle 1D2D algorithm
+# @ingroup l3_algos_basic
+#
+class Mesh_UseExistingElements(Mesh_Algorithm):
+
+ def __init__(self, dim, mesh, geom=0):
+ if dim == 1:
+ self.Create(mesh, geom, "Import_1D")
+ else:
+ self.Create(mesh, geom, "Import_1D2D")
+ return
+
+ ## Defines "Source edges" hypothesis, specifying groups of edges to import
+ # @param groups list of groups of edges
+ # @param toCopyMesh if True, the whole mesh \a groups belong to is imported
+ # @param toCopyGroups if True, all groups of the mesh \a groups belong to are imported
+ # @param UseExisting if ==true - searches for the existing hypothesis created with
+ # the same parameters, else (default) - creates a new one
+ def SourceEdges(self, groups, toCopyMesh=False, toCopyGroups=False, UseExisting=False):
+ if self.algo.GetName() == "Import_2D":
+ raise ValueError, "algoritm dimension mismatch"
+ hyp = self.Hypothesis("ImportSource1D", [groups, toCopyMesh, toCopyGroups],
+ UseExisting=UseExisting, CompareMethod=self._compareHyp)
+ hyp.SetSourceEdges(groups)
+ hyp.SetCopySourceMesh(toCopyMesh, toCopyGroups)
+ return hyp
+
+ ## Defines "Source faces" hypothesis, specifying groups of faces to import
+ # @param groups list of groups of faces
+ # @param toCopyMesh if True, the whole mesh \a groups belong to is imported
+ # @param toCopyGroups if True, all groups of the mesh \a groups belong to are imported
+ # @param UseExisting if ==true - searches for the existing hypothesis created with
+ # the same parameters, else (default) - creates a new one
+ def SourceFaces(self, groups, toCopyMesh=False, toCopyGroups=False, UseExisting=False):
+ if self.algo.GetName() == "Import_1D":
+ raise ValueError, "algoritm dimension mismatch"
+ hyp = self.Hypothesis("ImportSource2D", [groups, toCopyMesh, toCopyGroups],
+ UseExisting=UseExisting, CompareMethod=self._compareHyp)
+ hyp.SetSourceFaces(groups)
+ hyp.SetCopySourceMesh(toCopyMesh, toCopyGroups)
+ return hyp
+
+ def _compareHyp(self,hyp,args):
+ if hasattr( hyp, "GetSourceEdges"):
+ entries = hyp.GetSourceEdges()
+ else:
+ entries = hyp.GetSourceFaces()
+ groups = args[0]
+ toCopyMesh,toCopyGroups = hyp.GetCopySourceMesh()
+ if len(entries)==len(groups) and toCopyMesh==args[1] and toCopyGroups==args[2]:
+ entries2 = []
+ study = self.mesh.smeshpyD.GetCurrentStudy()
+ if study:
+ for g in groups:
+ ior = salome.orb.object_to_string(g)
+ sobj = study.FindObjectIOR(ior)
+ if sobj: entries2.append( sobj.GetID() )
+ pass
+ pass
+ entries.sort()
+ entries2.sort()
+ return entries == entries2
+ return False
+
+
# Private class: Mesh_UseExisting
# -------------------------------
class Mesh_UseExisting(Mesh_Algorithm):
