# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
+
# File : smesh.py
# Author : Francis KLOSS, OCC
# Module : SMESH
## @defgroup l2_modif_tofromqu Convert to/from Quadratic Mesh
## @}
+## @defgroup l1_measurements Measurements
import salome
import geompyDC
import StdMeshers
import SALOME
+import SALOMEDS
# import NETGENPlugin module if possible
noNETGENPlugin = 0
Hexotic = 9
BLSURF = 10
GHS3DPRL = 11
-QUARDANGLE = 0
+QUADRANGLE = 0
RADIAL_QUAD = 1
# MirrorType enumeration
PrecisionConfusion = 1e-07
+# TopAbs_State enumeration
+[TopAbs_IN, TopAbs_OUT, TopAbs_ON, TopAbs_UNKNOWN] = range(4)
+
+# Methods of splitting a hexahedron into tetrahedra
+Hex_5Tet, Hex_6Tet, Hex_24Tet = 1, 2, 3
+
## Converts an angle from degrees to radians
def DegreesToRadians(AngleInDegrees):
from math import pi
## Gets object name
def GetName(obj):
- ior = salome.orb.object_to_string(obj)
- sobj = salome.myStudy.FindObjectIOR(ior)
- if sobj is None:
- return NO_NAME
- else:
- attr = sobj.FindAttribute("AttributeName")[1]
- return attr.Value()
+ if obj:
+ # object not null
+ if isinstance(obj, SALOMEDS._objref_SObject):
+ # study object
+ return obj.GetName()
+ ior = salome.orb.object_to_string(obj)
+ if ior:
+ # CORBA object
+ studies = salome.myStudyManager.GetOpenStudies()
+ for sname in studies:
+ s = salome.myStudyManager.GetStudyByName(sname)
+ if not s: continue
+ sobj = s.FindObjectIOR(ior)
+ if not sobj: continue
+ return sobj.GetName()
+ if hasattr(obj, "GetName"):
+ # unknown CORBA object, having GetName() method
+ return obj.GetName()
+ else:
+ # unknown CORBA object, no GetName() method
+ return NO_NAME
+ pass
+ if hasattr(obj, "GetName"):
+ # unknown non-CORBA object, having GetName() method
+ return obj.GetName()
+ pass
+ raise RuntimeError, "Null or invalid object"
## Prints error message if a hypothesis was not assigned.
def TreatHypoStatus(status, hypName, geomName, isAlgo):
elif status == HYP_NOTCONFORM :
reason = "a non-conform mesh would be built"
elif status == HYP_ALREADY_EXIST :
+ if isAlgo: return # it does not influence anything
reason = hypType + " of the same dimension is already assigned to this shape"
elif status == HYP_BAD_DIM :
reason = hypType + " mismatches the shape"
return
hypName = '"' + hypName + '"'
geomName= '"' + geomName+ '"'
- if status < HYP_UNKNOWN_FATAL:
+ if status < HYP_UNKNOWN_FATAL and not geomName =='""':
print hypName, "was assigned to", geomName,"but", reason
- else:
+ elif not geomName == '""':
print hypName, "was not assigned to",geomName,":", reason
+ else:
+ print hypName, "was not assigned:", reason
pass
## Check meshing plugin availability
def EnumToLong(self,theItem):
return theItem._v
+ ## Returns a string representation of the color.
+ # To be used with filters.
+ # @param c color value (SALOMEDS.Color)
+ # @ingroup l1_controls
+ def ColorToString(self,c):
+ val = ""
+ if isinstance(c, SALOMEDS.Color):
+ val = "%s;%s;%s" % (c.R, c.G, c.B)
+ elif isinstance(c, str):
+ val = c
+ else:
+ raise ValueError, "Color value should be of string or SALOMEDS.Color type"
+ return val
+
## Gets PointStruct from vertex
# @param theVertex a GEOM object(vertex)
# @return SMESH.PointStruct
def Concatenate( self, meshes, uniteIdenticalGroups,
mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False):
mergeTolerance,Parameters = geompyDC.ParseParameters(mergeTolerance)
+ for i,m in enumerate(meshes):
+ if isinstance(m, Mesh):
+ meshes[i] = m.GetMesh()
if allGroups:
aSmeshMesh = SMESH._objref_SMESH_Gen.ConcatenateWithGroups(
self,meshes,uniteIdenticalGroups,mergeNodesAndElements,mergeTolerance)
else:
print "Error: The treshold should be a string."
return None
+ elif CritType == FT_ElemGeomType:
+ # Checks the treshold
+ try:
+ aCriterion.Threshold = self.EnumToLong(aTreshold)
+ except:
+ if isinstance(aTreshold, int):
+ aCriterion.Threshold = aTreshold
+ else:
+ print "Error: The treshold should be an integer or SMESH.GeometryType."
+ return None
+ pass
+ pass
+ elif CritType == FT_GroupColor:
+ # Checks the treshold
+ try:
+ aCriterion.ThresholdStr = self.ColorToString(aTreshold)
+ except:
+ print "Error: The threshold value should be of SALOMEDS.Color type"
+ return None
+ pass
elif CritType in [FT_FreeBorders, FT_FreeEdges, FT_BadOrientedVolume, FT_FreeNodes,
- FT_FreeFaces, FT_ElemGeomType, FT_GroupColor]:
+ FT_FreeFaces, FT_LinearOrQuadratic]:
# At this point the treshold is unnecessary
if aTreshold == FT_LogicalNOT:
aCriterion.UnaryOp = self.EnumToLong(FT_LogicalNOT)
# If the optional \a geom parameter is not set, this algorithm is global.
# \n Otherwise, this algorithm defines a submesh based on \a geom subshape.
# @param geom If defined, the subshape to be meshed (GEOM_Object)
- # @param algo values are: smesh.QUARDANGLE || smesh.RADIAL_QUAD
+ # @param algo values are: smesh.QUADRANGLE || smesh.RADIAL_QUAD
# @return an instance of Mesh_Quadrangle algorithm
# @ingroup l3_algos_basic
- def Quadrangle(self, geom=0, algo=QUARDANGLE):
+ def Quadrangle(self, geom=0, algo=QUADRANGLE):
if algo==RADIAL_QUAD:
return Mesh_RadialQuadrangle1D2D(self,geom)
else:
## Computes the mesh and returns the status of the computation
+ # @param geom geomtrical shape on which mesh data should be computed
+ # @param discardModifs if True and the mesh has been edited since
+ # a last total re-compute and that may prevent successful partial re-compute,
+ # then the mesh is cleaned before Compute()
# @return True or False
# @ingroup l2_construct
- def Compute(self, geom=0):
+ def Compute(self, geom=0, discardModifs=False):
if geom == 0 or not isinstance(geom, geompyDC.GEOM._objref_GEOM_Object):
if self.geom == 0:
geom = self.mesh.GetShapeToMesh()
geom = self.geom
ok = False
try:
+ if discardModifs and self.mesh.HasModificationsToDiscard(): # issue 0020693
+ self.mesh.Clear()
ok = self.smeshpyD.Compute(self.mesh, geom)
except SALOME.SALOME_Exception, ex:
print "Mesh computation failed, exception caught:"
print "Mesh computation failed, exception caught:"
traceback.print_exc()
if True:#not ok:
- errors = self.smeshpyD.GetAlgoState( self.mesh, geom )
allReasons = ""
+
+ # Treat compute errors
+ computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, geom )
+ for err in computeErrors:
+ shapeText = ""
+ if self.mesh.HasShapeToMesh():
+ try:
+ mainIOR = salome.orb.object_to_string(geom)
+ for sname in salome.myStudyManager.GetOpenStudies():
+ s = salome.myStudyManager.GetStudyByName(sname)
+ if not s: continue
+ mainSO = s.FindObjectIOR(mainIOR)
+ if not mainSO: continue
+ if err.subShapeID == 1:
+ shapeText = ' on "%s"' % mainSO.GetName()
+ subIt = s.NewChildIterator(mainSO)
+ while subIt.More():
+ subSO = subIt.Value()
+ subIt.Next()
+ obj = subSO.GetObject()
+ if not obj: continue
+ go = obj._narrow( geompyDC.GEOM._objref_GEOM_Object )
+ if not go: continue
+ ids = go.GetSubShapeIndices()
+ if len(ids) == 1 and ids[0] == err.subShapeID:
+ shapeText = ' on "%s"' % subSO.GetName()
+ break
+ if not shapeText:
+ shape = self.geompyD.GetSubShape( geom, [err.subShapeID])
+ if shape:
+ shapeText = " on %s #%s" % (shape.GetShapeType(), err.subShapeID)
+ else:
+ shapeText = " on subshape #%s" % (err.subShapeID)
+ except:
+ shapeText = " on subshape #%s" % (err.subShapeID)
+ errText = ""
+ stdErrors = ["OK", #COMPERR_OK
+ "Invalid input mesh", #COMPERR_BAD_INPUT_MESH
+ "std::exception", #COMPERR_STD_EXCEPTION
+ "OCC exception", #COMPERR_OCC_EXCEPTION
+ "SALOME exception", #COMPERR_SLM_EXCEPTION
+ "Unknown exception", #COMPERR_EXCEPTION
+ "Memory allocation problem", #COMPERR_MEMORY_PB
+ "Algorithm failed", #COMPERR_ALGO_FAILED
+ "Unexpected geometry"]#COMPERR_BAD_SHAPE
+ if err.code > 0:
+ if err.code < len(stdErrors): errText = stdErrors[err.code]
+ else:
+ errText = "code %s" % -err.code
+ if errText: errText += ". "
+ errText += err.comment
+ if allReasons != "":allReasons += "\n"
+ allReasons += '"%s" failed%s. Error: %s' %(err.algoName, shapeText, errText)
+ pass
+
+ # Treat hyp errors
+ errors = self.smeshpyD.GetAlgoState( self.mesh, geom )
for err in errors:
if err.isGlobalAlgo:
glob = "global"
reason = "For unknown reason."+\
" Revise Mesh.Compute() implementation in smeshDC.py!"
pass
- if allReasons != "":
- allReasons += "\n"
- pass
+ if allReasons != "":allReasons += "\n"
allReasons += reason
pass
if allReasons != "":
pass
status = self.mesh.AddHypothesis(geom, hyp)
isAlgo = hyp._narrow( SMESH_Algo )
- TreatHypoStatus( status, GetName( hyp ), GetName( geom ), isAlgo )
+ hyp_name = GetName( hyp )
+ geom_name = ""
+ if geom:
+ geom_name = GetName( geom )
+ TreatHypoStatus( status, hyp_name, geom_name, isAlgo )
return status
## Unassigns a hypothesis
def Group(self, grp, name=""):
return self.GroupOnGeom(grp, name)
- ## Deprecated, used only for compatibility! Please, use ExportMED() method instead.
+ ## Deprecated, used only for compatibility! Please, use ExportToMEDX() method instead.
# Exports the mesh in a file in MED format and chooses the \a version of MED format
+ ## allowing to overwrite the file if it exists or add the exported data to its contents
# @param f the file name
# @param version values are SMESH.MED_V2_1, SMESH.MED_V2_2
# @param opt boolean parameter for creating/not creating
# the groups Group_On_All_Nodes, Group_On_All_Faces, ...
+ # @param overwrite boolean parameter for overwriting/not overwriting the file
# @ingroup l2_impexp
- def ExportToMED(self, f, version, opt=0):
- self.mesh.ExportToMED(f, opt, version)
+ def ExportToMED(self, f, version, opt=0, overwrite=1):
+ self.mesh.ExportToMEDX(f, opt, version, overwrite)
- ## Exports the mesh in a file in MED format
+ ## Exports the mesh in a file in MED format and chooses the \a version of MED format
+ ## allowing to overwrite the file if it exists or add the exported data to its contents
# @param f is the file name
# @param auto_groups boolean parameter for creating/not creating
# the groups Group_On_All_Nodes, Group_On_All_Faces, ... ;
# the typical use is auto_groups=false.
# @param version MED format version(MED_V2_1 or MED_V2_2)
+ # @param overwrite boolean parameter for overwriting/not overwriting the file
# @ingroup l2_impexp
- def ExportMED(self, f, auto_groups=0, version=MED_V2_2):
- self.mesh.ExportToMED(f, auto_groups, version)
+ def ExportMED(self, f, auto_groups=0, version=MED_V2_2, overwrite=1):
+ self.mesh.ExportToMEDX(f, auto_groups, version, overwrite)
## Exports the mesh in a file in DAT format
# @param f the file name
return self.mesh.GetElementsId()
## Returns the list of IDs of mesh elements with the given type
- # @param elementType the required type of elements
+ # @param elementType the required type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME)
# @return list of integer values
# @ingroup l1_meshinfo
def GetElementsByType(self, elementType):
def GetElementType(self, id, iselem):
return self.mesh.GetElementType(id, iselem)
+ ## Returns the geometric type of mesh element
+ # @return the value from SMESH::EntityType enumeration
+ # @ingroup l1_meshinfo
+ def GetElementGeomType(self, id):
+ return self.mesh.GetElementGeomType(id)
+
## Returns the list of submesh elements IDs
# @param Shape a geom object(subshape) IOR
# Shape must be the subshape of a ShapeToMesh()
def ElemNbFaces(self, id):
return self.mesh.ElemNbFaces(id)
+ ## Returns nodes of given face (counted from zero) for given volumic element.
+ # @ingroup l1_meshinfo
+ def GetElemFaceNodes(self,elemId, faceIndex):
+ return self.mesh.GetElemFaceNodes(elemId, faceIndex)
+
+ ## Returns an element based on all given nodes.
+ # @ingroup l1_meshinfo
+ def FindElementByNodes(self,nodes):
+ return self.mesh.FindElementByNodes(nodes)
+
## Returns true if the given element is a polygon
# @ingroup l1_meshinfo
def IsPoly(self, id):
def RemoveNodes(self, IDsOfNodes):
return self.editor.RemoveNodes(IDsOfNodes)
+ ## Removes all orphan (free) nodes from mesh
+ # @return number of the removed nodes
+ # @ingroup l2_modif_del
+ def RemoveOrphanNodes(self):
+ return self.editor.RemoveOrphanNodes()
+
## Add a node to the mesh by coordinates
# @return Id of the new node
# @ingroup l2_modif_add
def FindElementsByPoint(self, x, y, z, elementType = SMESH.ALL):
return self.editor.FindElementsByPoint(x, y, z, elementType)
+ # Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
+ # TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
+
+ def GetPointState(self, x, y, z):
+ return self.editor.GetPointState(x, y, z)
## Finds the node closest to a point and moves it to a point location
# @param x the X coordinate of a point
def BestSplit (self, IDOfQuad, theCriterion):
return self.editor.BestSplit(IDOfQuad, self.smeshpyD.GetFunctor(theCriterion))
+ ## Splits volumic elements into tetrahedrons
+ # @param elemIDs either list of elements or mesh or group or submesh
+ # @param method flags passing splitting method: Hex_5Tet, Hex_6Tet, Hex_24Tet
+ # Hex_5Tet - split the hexahedron into 5 tetrahedrons, etc
+ # @ingroup l2_modif_cutquadr
+ def SplitVolumesIntoTetra(self, elemIDs, method=Hex_5Tet ):
+ if isinstance( elemIDs, Mesh ):
+ elemIDs = elemIDs.GetMesh()
+ self.editor.SplitVolumesIntoTetra(elemIDs, method)
+
## Splits quadrangle faces near triangular facets of volumes
#
# @ingroup l1_auxiliary
## Converts the mesh to quadratic, deletes old elements, replacing
# them with quadratic with the same id.
+ # @param theForce3d new node creation method:
+ # 0 - the medium node lies at the geometrical edge from which the mesh element is built
+ # 1 - the medium node lies at the middle of the line segments connecting start and end node of a mesh element
# @ingroup l2_modif_tofromqu
def ConvertToQuadratic(self, theForce3d):
self.editor.ConvertToQuadratic(theForce3d)
mesh.SetParameters(Parameters)
return Mesh( self.smeshpyD, self.geompyD, mesh )
+
+
+ ## Scales the object
+ # @param theObject - the object to translate (mesh, submesh, or group)
+ # @param thePoint - base point for scale
+ # @param theScaleFact - list of 1-3 scale factors for axises
+ # @param Copy - allows copying the translated elements
+ # @param MakeGroups - forces the generation of new groups from existing
+ # ones (if Copy)
+ # @return list of created groups (SMESH_GroupBase) if MakeGroups=True,
+ # empty list otherwise
+ def Scale(self, theObject, thePoint, theScaleFact, Copy, MakeGroups=False):
+ if ( isinstance( theObject, Mesh )):
+ theObject = theObject.GetMesh()
+ if ( isinstance( theObject, list )):
+ theObject = self.editor.MakeIDSource(theObject, SMESH.ALL)
+
+ thePoint, Parameters = ParsePointStruct(thePoint)
+ self.mesh.SetParameters(Parameters)
+
+ if Copy and MakeGroups:
+ return self.editor.ScaleMakeGroups(theObject, thePoint, theScaleFact)
+ self.editor.Scale(theObject, thePoint, theScaleFact, Copy)
+ return []
+
+ ## Creates a new mesh from the translated object
+ # @param theObject - the object to translate (mesh, submesh, or group)
+ # @param thePoint - base point for scale
+ # @param theScaleFact - list of 1-3 scale factors for axises
+ # @param MakeGroups - forces the generation of new groups from existing ones
+ # @param NewMeshName - the name of the newly created mesh
+ # @return instance of Mesh class
+ def ScaleMakeMesh(self, theObject, thePoint, theScaleFact, MakeGroups=False, NewMeshName=""):
+ if (isinstance(theObject, Mesh)):
+ theObject = theObject.GetMesh()
+ if ( isinstance( theObject, list )):
+ theObject = self.editor.MakeIDSource(theObject,SMESH.ALL)
+
+ mesh = self.editor.ScaleMakeMesh(theObject, thePoint, theScaleFact,
+ MakeGroups, NewMeshName)
+ #mesh.SetParameters(Parameters)
+ return Mesh( self.smeshpyD, self.geompyD, mesh )
+
+
+
## Rotates the elements
# @param IDsOfElements list of elements ids
# @param Axis the axis of rotation (AxisStruct or geom line)
## Finds groups of ajacent nodes within Tolerance.
# @param Tolerance the value of tolerance
# @param SubMeshOrGroup SubMesh or Group
+ # @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search
# @return the list of groups of nodes
# @ingroup l2_modif_trsf
- def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance):
- return self.editor.FindCoincidentNodesOnPart(SubMeshOrGroup, Tolerance)
+ def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[]):
+ if (isinstance( SubMeshOrGroup, Mesh )):
+ SubMeshOrGroup = SubMeshOrGroup.GetMesh()
+ if not isinstance( ExceptSubMeshOrGroups, list):
+ ExceptSubMeshOrGroups = [ ExceptSubMeshOrGroups ]
+ if ExceptSubMeshOrGroups and isinstance( ExceptSubMeshOrGroups[0], int):
+ ExceptSubMeshOrGroups = [ self.editor.MakeIDSource( ExceptSubMeshOrGroups, SMESH.NODE)]
+ return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,ExceptSubMeshOrGroups)
## Merges nodes
# @param GroupsOfNodes the list of groups of nodes
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
- # @param theNodes identifiers of node to be doubled
+ # @param theNodeId identifiers of node to be doubled
# @param theModifiedElems identifiers of elements to be updated
# @return TRUE if operation has been completed successfully, FALSE otherwise
# @ingroup l2_modif_edit
# This method provided for convenience works as DoubleNodes() described above.
# @param theNodes group of nodes to be doubled
# @param theModifiedElems group of elements to be updated.
- # @return TRUE if operation has been completed successfully, FALSE otherwise
+ # @param theMakeGroup forces the generation of a group containing new nodes.
+ # @return TRUE or a created group if operation has been completed successfully,
+ # FALSE or None otherwise
# @ingroup l2_modif_edit
- def DoubleNodeGroup(self, theNodes, theModifiedElems):
+ def DoubleNodeGroup(self, theNodes, theModifiedElems, theMakeGroup=False):
+ if theMakeGroup:
+ return self.editor.DoubleNodeGroupNew(theNodes, theModifiedElems)
return self.editor.DoubleNodeGroup(theNodes, theModifiedElems)
-
+
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
# @param theNodes list of groups of nodes to be doubled
# @param theNodesNot - group of nodes not to replicated
# @param theAffectedElems - group of elements to which the replicated nodes
# should be associated to.
+ # @param theMakeGroup forces the generation of a group containing new elements.
# @ingroup l2_modif_edit
- def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems):
+ def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems, theMakeGroup=False):
+ if theMakeGroup:
+ return self.editor.DoubleNodeElemGroupNew(theElems, theNodesNot, theAffectedElems)
return self.editor.DoubleNodeElemGroup(theElems, theNodesNot, theAffectedElems)
-
+
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
# @param theElems - group of of elements (edges or faces) to be replicated
def DoubleNodeElemGroupsInRegion(self, theElems, theNodesNot, theShape):
return self.editor.DoubleNodeElemGroupsInRegion(theElems, theNodesNot, theShape)
+ def _valueFromFunctor(self, funcType, elemId):
+ fn = self.smeshpyD.GetFunctor(funcType)
+ fn.SetMesh(self.mesh)
+ if fn.GetElementType() == self.GetElementType(elemId, True):
+ val = fn.GetValue(elemId)
+ else:
+ val = 0
+ return val
+
+ ## Get length of 1D element.
+ # @param elemId mesh element ID
+ # @return element's length value
+ # @ingroup l1_measurements
+ def GetLength(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Length, elemId)
+
+ ## Get area of 2D element.
+ # @param elemId mesh element ID
+ # @return element's area value
+ # @ingroup l1_measurements
+ def GetArea(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Area, elemId)
+
+ ## Get volume of 3D element.
+ # @param elemId mesh element ID
+ # @return element's volume value
+ # @ingroup l1_measurements
+ def GetVolume(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+
+ ## Get aspect ratio of 2D or 3D element.
+ # @param elemId mesh element ID
+ # @return element's aspect ratio value
+ # @ingroup l1_measurements
+ def GetAspectRatio(self, elemId):
+ if self.GetElementType(elemId, True) == SMESH.VOLUME:
+ ftype = SMESH.FT_AspectRatio3D
+ else:
+ ftype = SMESH.FT_AspectRatio
+ return self._valueFromFunctor(ftype, elemId)
+
+ ## Get warping angle of 2D element.
+ # @param elemId mesh element ID
+ # @return element's warping angle value
+ # @ingroup l1_measurements
+ def GetWarping(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Warping, elemId)
+
+ ## Get minimum angle of 2D element.
+ # @param elemId mesh element ID
+ # @return element's minimum angle value
+ # @ingroup l1_measurements
+ def GetMinimumAngle(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_MinimumAngle, elemId)
+
+ ## Get taper of 2D element.
+ # @param elemId mesh element ID
+ # @return element's taper value
+ # @ingroup l1_measurements
+ def GetTaper(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Taper, elemId)
+
+ ## Get skew of 2D element.
+ # @param elemId mesh element ID
+ # @return element's skew value
+ # @ingroup l1_measurements
+ def GetSkew(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Skew, elemId)
+
## The mother class to define algorithm, it is not recommended to use it directly.
#
# More details.
raise RuntimeError, "Attemp to create " + algo + " algoritm on None shape"
self.mesh = mesh
piece = mesh.geom
+ name = ""
if not geom:
self.geom = piece
else:
self.geom = geom
- name = GetName(geom)
- if name==NO_NAME:
+ try:
+ name = GetName(geom)
+ pass
+ except:
name = mesh.geompyD.SubShapeName(geom, piece)
mesh.geompyD.addToStudyInFather(piece, geom, name)
+ pass
self.subm = mesh.mesh.GetSubMesh(geom, algo.GetName())
self.algo = algo
status = mesh.mesh.AddHypothesis(self.geom, self.algo)
- TreatHypoStatus( status, algo.GetName(), GetName(self.geom), True )
+ TreatHypoStatus( status, algo.GetName(), name, True )
def CompareHyp (self, hyp, args):
print "CompareHyp is not implemented for ", self.__class__.__name__, ":", hyp.GetName()
def FixedPoints1D(self, points, nbSegs=[1], reversedEdges=[], UseExisting=0):
if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges
reversedEdges, UseExisting = [], reversedEdges
+ if reversedEdges and isinstance( reversedEdges[0], geompyDC.GEOM._objref_GEOM_Object ):
+ for i in range( len( reversedEdges )):
+ reversedEdges[i] = self.mesh.geompyD.GetSubShapeID(self.mesh.geom, reversedEdges[i] )
entry = self.MainShapeEntry()
hyp = self.Hypothesis("FixedPoints1D", [points, nbSegs, reversedEdges, entry],
UseExisting=UseExisting,
- CompareMethod=self.CompareArithmetic1D)
+ CompareMethod=self.CompareFixedPoints1D)
hyp.SetPoints(points)
hyp.SetNbSegments(nbSegs)
hyp.SetReversedEdges(reversedEdges)
### 0D algorithm
if self.geom is None:
raise RuntimeError, "Attemp to create SegmentAroundVertex_0D algoritm on None shape"
- name = GetName(self.geom)
- if name == NO_NAME:
+ try:
+ name = GetName(self.geom)
+ pass
+ except:
piece = self.mesh.geom
name = self.mesh.geompyD.SubShapeName(self.geom, piece)
self.mesh.geompyD.addToStudyInFather(piece, self.geom, name)
+ pass
algo = self.FindAlgorithm("SegmentAroundVertex_0D", self.mesh.smeshpyD)
if algo is None:
algo = self.mesh.smeshpyD.CreateHypothesis("SegmentAroundVertex_0D", "libStdMeshersEngine.so")
self.Parameters().SetPhyMax(theVal)
## Sets a way to define maximum angular deflection of mesh from CAD model.
- # @param theGeometricMesh is: DefaultGeom or Custom
+ # @param theGeometricMesh is: 0 (None) or 1 (Custom)
# @ingroup l3_hypos_blsurf
def SetGeometricMesh(self, theGeometricMesh=0):
# Parameter of BLSURF algo
CompareMethod=self.CompareEqualHyp)
return hyp
+ ## Defines "QuadrangleParams" hypothesis
+ # @param vertex: vertex of a trilateral geometrical face, around which triangles
+ # will be created while other elements will be quadrangles.
+ # Vertex can be either a GEOM_Object or a vertex ID within the
+ # shape to mesh
+ # @param UseExisting: if ==true - searches for the existing hypothesis created with
+ # the same parameters, else (default) - creates a new one
+ #
+ # @ingroup l3_hypos_additi
+ def TriangleVertex(self, vertex, UseExisting=0):
+ vertexID = vertex
+ if isinstance( vertexID, geompyDC.GEOM._objref_GEOM_Object ):
+ vertexID = self.mesh.geompyD.GetSubShapeID( self.mesh.geom, vertex )
+ hyp = self.Hypothesis("QuadrangleParams", [vertexID], UseExisting = UseExisting,
+ CompareMethod=lambda hyp,args: hyp.GetTriaVertex()==args[0])
+ hyp.SetTriaVertex( vertexID )
+ return hyp
+
+
# Public class: Mesh_Tetrahedron
# ------------------------------
