## @defgroup l2_modif_tofromqu Convert to/from Quadratic Mesh
## @}
+## @defgroup l1_measurements Measurements
import salome
import geompyDC
# TopAbs_State enumeration
[TopAbs_IN, TopAbs_OUT, TopAbs_ON, TopAbs_UNKNOWN] = range(4)
+# Methods of splitting a hexahedron into tetrahedra
+Hex_5Tet, Hex_6Tet, Hex_24Tet = 1, 2, 3
## Converts an angle from degrees to radians
def DegreesToRadians(AngleInDegrees):
def Concatenate( self, meshes, uniteIdenticalGroups,
mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False):
mergeTolerance,Parameters = geompyDC.ParseParameters(mergeTolerance)
+ for i,m in enumerate(meshes):
+ if isinstance(m, Mesh):
+ meshes[i] = m.GetMesh()
if allGroups:
aSmeshMesh = SMESH._objref_SMESH_Gen.ConcatenateWithGroups(
self,meshes,uniteIdenticalGroups,mergeNodesAndElements,mergeTolerance)
return self.mesh.GetElementsId()
## Returns the list of IDs of mesh elements with the given type
- # @param elementType the required type of elements
+ # @param elementType the required type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME)
# @return list of integer values
# @ingroup l1_meshinfo
def GetElementsByType(self, elementType):
## Splits volumic elements into tetrahedrons
# @param elemIDs either list of elements or mesh or group or submesh
- # @param method flags passing splitting method:
- # 1 - split the hexahedron into 5 tetrahedrons
- # 2 - split the hexahedron into 6 tetrahedrons
+ # @param method flags passing splitting method: Hex_5Tet, Hex_6Tet, Hex_24Tet
+ # Hex_5Tet - split the hexahedron into 5 tetrahedrons, etc
# @ingroup l2_modif_cutquadr
- def SplitVolumesIntoTetra(self, elemIDs, method=1 ):
+ def SplitVolumesIntoTetra(self, elemIDs, method=Hex_5Tet ):
if isinstance( elemIDs, Mesh ):
elemIDs = elemIDs.GetMesh()
self.editor.SplitVolumesIntoTetra(elemIDs, method)
## Converts the mesh to quadratic, deletes old elements, replacing
# them with quadratic with the same id.
+ # @param theForce3d new node creation method:
+ # 0 - the medium node lies at the geometrical edge from which the mesh element is built
+ # 1 - the medium node lies at the middle of the line segments connecting start and end node of a mesh element
# @ingroup l2_modif_tofromqu
def ConvertToQuadratic(self, theForce3d):
self.editor.ConvertToQuadratic(theForce3d)
## Scales the object
# @param theObject - the object to translate (mesh, submesh, or group)
# @param thePoint - base point for scale
- # @param theScaleFact - scale factors for axises
+ # @param theScaleFact - list of 1-3 scale factors for axises
# @param Copy - allows copying the translated elements
# @param MakeGroups - forces the generation of new groups from existing
# ones (if Copy)
if ( isinstance( theObject, Mesh )):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
- theObject = self.editor.MakeIDSource(theObject)
+ theObject = self.editor.MakeIDSource(theObject, SMESH.ALL)
thePoint, Parameters = ParsePointStruct(thePoint)
self.mesh.SetParameters(Parameters)
## Creates a new mesh from the translated object
# @param theObject - the object to translate (mesh, submesh, or group)
# @param thePoint - base point for scale
- # @param theScaleFact - scale factors for axises
+ # @param theScaleFact - list of 1-3 scale factors for axises
# @param MakeGroups - forces the generation of new groups from existing ones
# @param NewMeshName - the name of the newly created mesh
# @return instance of Mesh class
if (isinstance(theObject, Mesh)):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
- theObject = self.editor.MakeIDSource(theObject)
+ theObject = self.editor.MakeIDSource(theObject,SMESH.ALL)
mesh = self.editor.ScaleMakeMesh(theObject, thePoint, theScaleFact,
MakeGroups, NewMeshName)
# This method provided for convenience works as DoubleNodes() described above.
# @param theNodes group of nodes to be doubled
# @param theModifiedElems group of elements to be updated.
- # @return TRUE if operation has been completed successfully, FALSE otherwise
+ # @param theMakeGroup forces the generation of a group containing new nodes.
+ # @return TRUE or a created group if operation has been completed successfully,
+ # FALSE or None otherwise
# @ingroup l2_modif_edit
- def DoubleNodeGroup(self, theNodes, theModifiedElems):
+ def DoubleNodeGroup(self, theNodes, theModifiedElems, theMakeGroup=False):
+ if theMakeGroup:
+ return self.editor.DoubleNodeGroupNew(theNodes, theModifiedElems)
return self.editor.DoubleNodeGroup(theNodes, theModifiedElems)
- ## Creates a hole in a mesh by doubling the nodes of some particular elements
- # Works as DoubleNodeGroup() described above, but returns a new group with
- # newly created nodes.
- # @param theNodes group of nodes to be doubled
- # @param theModifiedElems group of elements to be updated.
- # @return a new group with newly created nodes
- # @ingroup l2_modif_edit
- def DoubleNodeGroupNew(self, theNodes, theModifiedElems):
- return self.editor.DoubleNodeGroupNew(theNodes, theModifiedElems)
-
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
# @param theNodes list of groups of nodes to be doubled
# @param theNodesNot - group of nodes not to replicated
# @param theAffectedElems - group of elements to which the replicated nodes
# should be associated to.
+ # @param theMakeGroup forces the generation of a group containing new elements.
# @ingroup l2_modif_edit
- def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems):
+ def DoubleNodeElemGroup(self, theElems, theNodesNot, theAffectedElems, theMakeGroup=False):
+ if theMakeGroup:
+ return self.editor.DoubleNodeElemGroupNew(theElems, theNodesNot, theAffectedElems)
return self.editor.DoubleNodeElemGroup(theElems, theNodesNot, theAffectedElems)
- ## Creates a hole in a mesh by doubling the nodes of some particular elements
- # Works as DoubleNodeElemGroup() described above, but returns a new group with
- # newly created elements.
- # @param theElems - group of of elements (edges or faces) to be replicated
- # @param theNodesNot - group of nodes not to replicated
- # @param theAffectedElems - group of elements to which the replicated nodes
- # should be associated to.
- # @return a new group with newly created elements
- # @ingroup l2_modif_edit
- def DoubleNodeElemGroupNew(self, theElems, theNodesNot, theAffectedElems):
- return self.editor.DoubleNodeElemGroupNew(theElems, theNodesNot, theAffectedElems)
-
## Creates a hole in a mesh by doubling the nodes of some particular elements
# This method provided for convenience works as DoubleNodes() described above.
# @param theElems - group of of elements (edges or faces) to be replicated
def DoubleNodeElemGroupsInRegion(self, theElems, theNodesNot, theShape):
return self.editor.DoubleNodeElemGroupsInRegion(theElems, theNodesNot, theShape)
+ def _valueFromFunctor(self, funcType, elemId):
+ fn = self.smeshpyD.GetFunctor(funcType)
+ fn.SetMesh(self.mesh)
+ if fn.GetElementType() == self.GetElementType(elemId, True):
+ val = fn.GetValue(elemId)
+ else:
+ val = 0
+ return val
+
+ ## Get length of 1D element.
+ # @param elemId mesh element ID
+ # @return element's length value
+ # @ingroup l1_measurements
+ def GetLength(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Length, elemId)
+
+ ## Get area of 2D element.
+ # @param elemId mesh element ID
+ # @return element's area value
+ # @ingroup l1_measurements
+ def GetArea(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Area, elemId)
+
+ ## Get volume of 3D element.
+ # @param elemId mesh element ID
+ # @return element's volume value
+ # @ingroup l1_measurements
+ def GetVolume(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+
+ ## Get aspect ratio of 2D or 3D element.
+ # @param elemId mesh element ID
+ # @return element's aspect ratio value
+ # @ingroup l1_measurements
+ def GetAspectRatio(self, elemId):
+ if self.GetElementType(elemId, True) == SMESH.VOLUME:
+ ftype = SMESH.FT_AspectRatio3D
+ else:
+ ftype = SMESH.FT_AspectRatio
+ return self._valueFromFunctor(ftype, elemId)
+
+ ## Get warping angle of 2D element.
+ # @param elemId mesh element ID
+ # @return element's warping angle value
+ # @ingroup l1_measurements
+ def GetWarping(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Warping, elemId)
+
+ ## Get minimum angle of 2D element.
+ # @param elemId mesh element ID
+ # @return element's minimum angle value
+ # @ingroup l1_measurements
+ def GetMinimumAngle(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_MinimumAngle, elemId)
+
+ ## Get taper of 2D element.
+ # @param elemId mesh element ID
+ # @return element's taper value
+ # @ingroup l1_measurements
+ def GetTaper(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Taper, elemId)
+
+ ## Get skew of 2D element.
+ # @param elemId mesh element ID
+ # @return element's skew value
+ # @ingroup l1_measurements
+ def GetSkew(self, elemId):
+ return self._valueFromFunctor(SMESH.FT_Skew, elemId)
+
## The mother class to define algorithm, it is not recommended to use it directly.
#
# More details.
self.Parameters().SetPhyMax(theVal)
## Sets a way to define maximum angular deflection of mesh from CAD model.
- # @param theGeometricMesh is: DefaultGeom or Custom
+ # @param theGeometricMesh is: 0 (None) or 1 (Custom)
# @ingroup l3_hypos_blsurf
def SetGeometricMesh(self, theGeometricMesh=0):
# Parameter of BLSURF algo
