elif status == HYP_BAD_SUBSHAPE :
reason = "the shape is neither the main one, nor its sub-shape, nor a valid group"
elif status == HYP_BAD_GEOMETRY:
- reason = "geometry mismatches the expectation of the algorithm"
+ reason = "the algorithm is not applicable to this geometry"
elif status == HYP_HIDDEN_ALGO:
reason = "it is hidden by an algorithm of an upper dimension, which generates elements of all dimensions"
elif status == HYP_HIDING_ALGO:
## Creates a numerical functor by its type
# @param theCriterion functor type - an item of SMESH.FunctorType enumeration.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return SMESH_NumericalFunctor
# @ingroup l1_controls
def GetFunctor(self,theCriterion):
# Treat compute errors
computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, geom )
for err in computeErrors:
- shapeText = ""
- if self.mesh.HasShapeToMesh():
- try:
- mainIOR = salome.orb.object_to_string(geom)
- for sname in salome.myStudyManager.GetOpenStudies():
- s = salome.myStudyManager.GetStudyByName(sname)
- if not s: continue
- mainSO = s.FindObjectIOR(mainIOR)
- if not mainSO: continue
- if err.subShapeID == 1:
- shapeText = ' on "%s"' % mainSO.GetName()
- subIt = s.NewChildIterator(mainSO)
- while subIt.More():
- subSO = subIt.Value()
- subIt.Next()
- obj = subSO.GetObject()
- if not obj: continue
- go = obj._narrow( geomBuilder.GEOM._objref_GEOM_Object )
- if not go: continue
- ids = go.GetSubShapeIndices()
- if len(ids) == 1 and ids[0] == err.subShapeID:
- shapeText = ' on "%s"' % subSO.GetName()
- break
- if not shapeText:
- shape = self.geompyD.GetSubShape( geom, [err.subShapeID])
- if shape:
- shapeText = " on %s #%s" % (shape.GetShapeType(), err.subShapeID)
- else:
- shapeText = " on subshape #%s" % (err.subShapeID)
- except:
- shapeText = " on subshape #%s" % (err.subShapeID)
+ shapeText = " on %s" % self.GetSubShapeName( err.subShapeID )
errText = ""
stdErrors = ["OK", #COMPERR_OK
"Invalid input mesh", #COMPERR_BAD_INPUT_MESH
pass
return ok
- ## Return submesh objects list in meshing order
- # @return list of list of submesh objects
+ ## Return a name of a sub-shape by its ID
+ # @param subShapeID a unique ID of a sub-shape
+ # @return a string describing the sub-shape; possible variants:
+ # - "Face_12" (published sub-shape)
+ # - FACE #3 (not published sub-shape)
+ # - sub-shape #3 (invalid sub-shape ID)
+ # - #3 (error in this function)
+ def GetSubShapeName(self, subShapeID ):
+ if not self.mesh.HasShapeToMesh():
+ return ""
+ try:
+ shapeText = ""
+ mainIOR = salome.orb.object_to_string( self.GetShape() )
+ for sname in salome.myStudyManager.GetOpenStudies():
+ s = salome.myStudyManager.GetStudyByName(sname)
+ if not s: continue
+ mainSO = s.FindObjectIOR(mainIOR)
+ if not mainSO: continue
+ if subShapeID == 1:
+ shapeText = '"%s"' % mainSO.GetName()
+ subIt = s.NewChildIterator(mainSO)
+ while subIt.More():
+ subSO = subIt.Value()
+ subIt.Next()
+ obj = subSO.GetObject()
+ if not obj: continue
+ go = obj._narrow( geomBuilder.GEOM._objref_GEOM_Object )
+ if not go: continue
+ try:
+ ids = self.geompyD.GetSubShapeID( self.GetShape(), go )
+ except:
+ continue
+ if ids == subShapeID:
+ shapeText = '"%s"' % subSO.GetName()
+ break
+ if not shapeText:
+ shape = self.geompyD.GetSubShape( self.GetShape(), [subShapeID])
+ if shape:
+ shapeText = '%s #%s' % (shape.GetShapeType(), subShapeID)
+ else:
+ shapeText = 'sub-shape #%s' % (subShapeID)
+ except:
+ shapeText = "#%s" % (subShapeID)
+ return shapeText
+
+ ## Return a list of sub-shapes meshing of which failed, grouped into GEOM groups by
+ # error of an algorithm
+ # @param publish if @c True, the returned groups will be published in the study
+ # @return a list of GEOM groups each named after a failed algorithm
+ def GetFailedShapes(self, publish=False):
+
+ algo2shapes = {}
+ computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, self.GetShape() )
+ for err in computeErrors:
+ shape = self.geompyD.GetSubShape( self.GetShape(), [err.subShapeID])
+ if not shape: continue
+ if err.algoName in algo2shapes:
+ algo2shapes[ err.algoName ].append( shape )
+ else:
+ algo2shapes[ err.algoName ] = [ shape ]
+ pass
+
+ groups = []
+ for algoName, shapes in algo2shapes.items():
+ while shapes:
+ groupType = self.smeshpyD.EnumToLong( shapes[0].GetShapeType() )
+ otherTypeShapes = []
+ sameTypeShapes = []
+ group = self.geompyD.CreateGroup( self.geom, groupType )
+ for shape in shapes:
+ if shape.GetShapeType() == shapes[0].GetShapeType():
+ sameTypeShapes.append( shape )
+ else:
+ otherTypeShapes.append( shape )
+ self.geompyD.UnionList( group, sameTypeShapes )
+ if otherTypeShapes:
+ group.SetName( "%s %s" % ( algoName, shapes[0].GetShapeType() ))
+ else:
+ group.SetName( algoName )
+ groups.append( group )
+ shapes = otherTypeShapes
+ pass
+ if publish:
+ for group in groups:
+ self.geompyD.addToStudyInFather( self.geom, group, group.GetName() )
+ return groups
+
+ ## Return sub-mesh objects list in meshing order
+ # @return list of list of sub-meshes
# @ingroup l2_construct
def GetMeshOrder(self):
return self.mesh.GetMeshOrder()
- ## Return submesh objects list in meshing order
- # @return list of list of submesh objects
+ ## Set order in which concurrent sub-meshes sould be meshed
+ # @param submeshes list of sub-meshes
# @ingroup l2_construct
def SetMeshOrder(self, submeshes):
return self.mesh.SetMeshOrder(submeshes)
# @return SMESH.Hypothesis_Status
# @ingroup l2_hypotheses
def AddHypothesis(self, hyp, geom=0):
+ if isinstance( hyp, geomBuilder.GEOM._objref_GEOM_Object ):
+ hyp, geom = geom, hyp
if isinstance( hyp, Mesh_Algorithm ):
hyp = hyp.GetAlgorithm()
pass
# @return an integer value
# @ingroup l1_meshinfo
def NbPolygons(self, elementOrder = SMESH.ORDER_ANY):
- return self.mesh.NbPolygons(elementOrder)
+ return self.mesh.NbPolygonsOfOrder(elementOrder)
## Returns the number of volumes in the mesh
# @return an integer value
# @return the list of integer values
# @ingroup l1_meshinfo
def GetSubMeshElementsId(self, Shape):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
return self.mesh.GetSubMeshElementsId(ShapeID)
# @return the list of integer values
# @ingroup l1_meshinfo
def GetSubMeshNodesId(self, Shape, all):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
# @return element type
# @ingroup l1_meshinfo
def GetSubMeshElementType(self, Shape):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
return self.mesh.GetSubMeshElementType(ShapeID)
# @ingroup l2_modif_add
def SetNodeOnVertex(self, NodeID, Vertex):
if ( isinstance( Vertex, geomBuilder.GEOM._objref_GEOM_Object)):
- VertexID = Vertex.GetSubShapeIndices()[0]
+ VertexID = self.geompyD.GetSubShapeID( self.geom, Vertex )
else:
VertexID = Vertex
try:
# @ingroup l2_modif_add
def SetNodeOnEdge(self, NodeID, Edge, paramOnEdge):
if ( isinstance( Edge, geomBuilder.GEOM._objref_GEOM_Object)):
- EdgeID = Edge.GetSubShapeIndices()[0]
+ EdgeID = self.geompyD.GetSubShapeID( self.geom, Edge )
else:
EdgeID = Edge
try:
# @ingroup l2_modif_add
def SetNodeOnFace(self, NodeID, Face, u, v):
if ( isinstance( Face, geomBuilder.GEOM._objref_GEOM_Object)):
- FaceID = Face.GetSubShapeIndices()[0]
+ FaceID = self.geompyD.GetSubShapeID( self.geom, Face )
else:
FaceID = Face
try:
# @ingroup l2_modif_add
def SetNodeInVolume(self, NodeID, Solid):
if ( isinstance( Solid, geomBuilder.GEOM._objref_GEOM_Object)):
- SolidID = Solid.GetSubShapeIndices()[0]
+ SolidID = self.geompyD.GetSubShapeID( self.geom, Solid )
else:
SolidID = Solid
try:
# @ingroup l2_modif_add
def SetMeshElementOnShape(self, ElementID, Shape):
if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
try:
## Fuses the neighbouring triangles into quadrangles.
# @param IDsOfElements The triangles to be fused.
# @param theCriterion a numerical functor, in terms of enum SMESH.FunctorType, used to
- # choose a neighbour to fuse with.
+ # applied to possible quadrangles to choose a neighbour to fuse with.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @param MaxAngle is the maximum angle between element normals at which the fusion
# is still performed; theMaxAngle is mesured in radians.
# Also it could be a name of variable which defines angle in degrees.
## Fuses the neighbouring triangles of the object into quadrangles
# @param theObject is mesh, submesh or group
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
- # choose a neighbour to fuse with.
+ # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType,
+ # applied to possible quadrangles to choose a neighbour to fuse with.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @param MaxAngle a max angle between element normals at which the fusion
# is still performed; theMaxAngle is mesured in radians.
# @return TRUE in case of success, FALSE otherwise.
## Splits quadrangles into triangles.
# @param IDsOfElements the faces to be splitted.
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
+ # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting. If @a theCriterion is None, which is a default
# value, then quadrangles will be split by the smallest diagonal.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_cutquadr
def QuadToTri (self, IDsOfElements, theCriterion = None):
# choose a diagonal for splitting. If @a theCriterion is None, which is a default
# value, then quadrangles will be split by the smallest diagonal.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_cutquadr
def QuadToTriObject (self, theObject, theCriterion = None):
# @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return 1 if 1-3 diagonal is better, 2 if 2-4
# diagonal is better, 0 if error occurs.
# @ingroup l2_modif_cutquadr
## Creates 2D mesh as skin on boundary faces of a 3D mesh
# @return TRUE if operation has been completed successfully, FALSE otherwise
# @ingroup l2_modif_edit
- def Make2DMeshFrom3D(self):
- return self.editor. Make2DMeshFrom3D()
+ def Make2DMeshFrom3D(self):
+ return self.editor.Make2DMeshFrom3D()
## Creates missing boundary elements
# @param elements - elements whose boundary is to be checked:
## Generates new elements by extrusion of the elements with given ids
- # @param IDsOfElements the list of elements ids for extrusion
+ # @param IDsOfElements the list of ids of elements or nodes for extrusion
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups)
## Generates new elements by extrusion along the normal to a discretized surface or wire
- # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh
- # Only faces can be extruded so far. Sub-mesh should be a sub-mesh on geom faces.
+ # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh.
+ # Only faces can be extruded so far. A sub-mesh should be a sub-mesh on geom faces.
# @param StepSize length of one extrusion step (the total extrusion
# length will be \a NbOfSteps * \a StepSize ).
# @param NbOfSteps number of extrusion steps.
return self.editor.ExtrusionByNormal(Elements, StepSize, NbOfSteps,
ByAverageNormal, UseInputElemsOnly, MakeGroups, Dim)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of the elements or nodes which belong to the object
+ # @param theObject the object whose elements or nodes should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @param NbOfSteps the number of steps
# @param MakeGroups forces the generation of new groups from existing ones
- # @param IsNodes is True if elements to extrude are nodes
+ # @param IsNodes is True if elements to extrude are nodes
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
def ExtrusionSweepObject(self, theObject, StepVector, NbOfSteps, MakeGroups=False, IsNodes=False):
else : e,f, = theObject,theObject
return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of edges which belong to the object
+ # @param theObject object whose 1D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
def ExtrusionSweepObject1D(self, theObject, StepVector, NbOfSteps, MakeGroups=False):
return self.ExtrusionSweepObjects([],theObject,[], StepVector, NbOfSteps, MakeGroups)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of faces which belong to the object
+ # @param theObject object whose 2D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
## Generates new elements by extrusion of the given elements
# The path of extrusion must be a meshed edge.
- # @param Base mesh or group, or submesh, or list of ids of elements for extrusion
+ # @param Base mesh or group, or sub-mesh, or list of ids of elements for extrusion
# @param Path - 1D mesh or 1D sub-mesh, along which proceeds the extrusion
# @param NodeStart the start node from Path. Defines the direction of extrusion
# @param HasAngles allows the shape to be rotated around the path
## Generates new elements by extrusion of the elements which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
+ # @param theObject the object whose elements should be processed.
# It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
if MakeGroups: return gr,er
return er
- ## Generates new elements by extrusion of the elements which belong to the object
+ ## Generates new elements by extrusion of mesh segments which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose 1D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
if MakeGroups: return gr,er
return er
- ## Generates new elements by extrusion of the elements which belong to the object
+ ## Generates new elements by extrusion of faces which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose 2D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
# @param GroupsOfNodes a list of groups of nodes IDs for merging
# (e.g. [[1,12,13],[25,4]], then nodes 12, 13 and 4 will be removed and replaced
# by nodes 1 and 25 correspondingly in all elements and groups
+ # @param NodesToKeep nodes to keep in the mesh: a list of groups, sub-meshes or node IDs.
+ # If @a NodesToKeep does not include a node to keep for some group to merge,
+ # then the first node in the group is kept.
# @ingroup l2_modif_trsf
- def MergeNodes (self, GroupsOfNodes):
- self.editor.MergeNodes(GroupsOfNodes)
+ def MergeNodes (self, GroupsOfNodes, NodesToKeep=[]):
+ # NodesToKeep are converted to SMESH_IDSource in meshEditor.MergeNodes()
+ self.editor.MergeNodes(GroupsOfNodes,NodesToKeep)
## Finds the elements built on the same nodes.
# @param MeshOrSubMeshOrGroup Mesh or SubMesh, or Group of elements for searching
def MergeEqualElements(self):
self.editor.MergeEqualElements()
+ ## Returns groups of FreeBorder's coincident within the given tolerance.
+ # @param tolerance the tolerance. If the tolerance <= 0.0 then one tenth of an average
+ # size of elements adjacent to free borders being compared is used.
+ # @return SMESH.CoincidentFreeBorders structure
+ # @ingroup l2_modif_trsf
+ def FindCoincidentFreeBorders (self, tolerance=0.):
+ return self.editor.FindCoincidentFreeBorders( tolerance )
+
+ ## Sew FreeBorder's of each group
+ # @param freeBorders either a SMESH.CoincidentFreeBorders structure or a list of lists
+ # where each enclosed list contains node IDs of a group of coincident free
+ # borders such that each consequent triple of IDs within a group describes
+ # a free border in a usual way: n1, n2, nLast - i.e. 1st node, 2nd node and
+ # last node of a border.
+ # For example [[1, 2, 10, 20, 21, 40], [11, 12, 15, 55, 54, 41]] describes two
+ # groups of coincident free borders, each group including two borders.
+ # @param createPolygons if @c True faces adjacent to free borders are converted to
+ # polygons if a node of opposite border falls on a face edge, else such
+ # faces are split into several ones.
+ # @param createPolyhedra if @c True volumes adjacent to free borders are converted to
+ # polyhedra if a node of opposite border falls on a volume edge, else such
+ # volumes, if any, remain intact and the mesh becomes non-conformal.
+ # @return a number of successfully sewed groups
+ # @ingroup l2_modif_trsf
+ def SewCoincidentFreeBorders (self, freeBorders, createPolygons=False, createPolyhedra=False):
+ if freeBorders and isinstance( freeBorders, list ):
+ # construct SMESH.CoincidentFreeBorders
+ if isinstance( freeBorders[0], int ):
+ freeBorders = [freeBorders]
+ borders = []
+ coincidentGroups = []
+ for nodeList in freeBorders:
+ if not nodeList or len( nodeList ) % 3:
+ raise ValueError, "Wrong number of nodes in this group: %s" % nodeList
+ group = []
+ while nodeList:
+ group.append ( SMESH.FreeBorderPart( len(borders), 0, 1, 2 ))
+ borders.append( SMESH.FreeBorder( nodeList[:3] ))
+ nodeList = nodeList[3:]
+ pass
+ coincidentGroups.append( group )
+ pass
+ freeBorders = SMESH.CoincidentFreeBorders( borders, coincidentGroups )
+
+ return self.editor.SewCoincidentFreeBorders( freeBorders, createPolygons, createPolyhedra )
+
## Sews free borders
# @return SMESH::Sew_Error
# @ingroup l2_modif_trsf
def ClearLastCreated(self):
self.editor.ClearLastCreated()
- ## Creates Duplicates given elements, i.e. creates new elements based on the
+ ## Creates duplicates of given elements, i.e. creates new elements based on the
# same nodes as the given ones.
# @param theElements - container of elements to duplicate. It can be a Mesh,
# sub-mesh, group, filter or a list of element IDs. If \a theElements is
## Returns value of a functor for a given element
# @param funcType an item of SMESH.FunctorType enum
+ # Type "SMESH.FunctorType._items" in the Python Console to see all items.
# @param elemId element or node ID
# @param isElem @a elemId is ID of element or node
# @return the functor value or zero in case of invalid arguments
fun = self._getFunctor( funType )
if fun:
if meshPart:
+ if hasattr( meshPart, "SetMesh" ):
+ meshPart.SetMesh( self.mesh ) # set mesh to filter
hist = fun.GetLocalHistogram( 1, False, meshPart )
else:
hist = fun.GetHistogram( 1, False )
pass # end of Mesh class
-## class used to add to SMESH_MeshEditor methods removed from its CORBA API
+
+## class used to compensate change of CORBA API of SMESH_Mesh for backward compatibility
+# with old dump scripts which call SMESH_Mesh directly and not via smeshBuilder.Mesh
+#
+class meshProxy(SMESH._objref_SMESH_Mesh):
+ def __init__(self):
+ SMESH._objref_SMESH_Mesh.__init__(self)
+ def __deepcopy__(self, memo=None):
+ new = self.__class__()
+ return new
+ def CreateDimGroup(self,*args): # 2 args added: nbCommonNodes, underlyingOnly
+ if len( args ) == 3:
+ args += SMESH.ALL_NODES, True
+ return SMESH._objref_SMESH_Mesh.CreateDimGroup( self, *args )
+ pass
+omniORB.registerObjref(SMESH._objref_SMESH_Mesh._NP_RepositoryId, meshProxy)
+
+## class used to compensate change of CORBA API of SMESH_MeshEditor for backward compatibility
+# with old dump scripts which call SMESH_MeshEditor directly and not via smeshBuilder.Mesh
#
class meshEditor(SMESH._objref_SMESH_MeshEditor):
def __init__(self):
if hasattr( self.mesh, name ):
return getattr( self.mesh, name )
if name == "ExtrusionAlongPathObjX":
- return getattr( self.mesh, "ExtrusionAlongPathX" )
- print name, "meshEditor: attribute '%s' NOT FOUND" % name
+ return getattr( self.mesh, "ExtrusionAlongPathX" ) # other method name
+ print "meshEditor: attribute '%s' NOT FOUND" % name
return None
def __deepcopy__(self, memo=None):
new = self.__class__()
return new
+ def FindCoincidentNodes(self,*args): # a 2nd arg added (SeparateCornerAndMediumNodes)
+ if len( args ) == 1: args += False,
+ return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodes( self, *args )
+ def FindCoincidentNodesOnPart(self,*args): # a 3d arg added (SeparateCornerAndMediumNodes)
+ if len( args ) == 2: args += False,
+ return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodesOnPart( self, *args )
+ def MergeNodes(self,*args): # a 2nd arg added (NodesToKeep)
+ if len( args ) == 1:
+ return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], [] )
+ NodesToKeep = args[1]
+ unRegister = genObjUnRegister()
+ if NodesToKeep:
+ if isinstance( NodesToKeep, list ) and isinstance( NodesToKeep[0], int ):
+ NodesToKeep = self.MakeIDSource( NodesToKeep, SMESH.NODE )
+ if not isinstance( NodesToKeep, list ):
+ NodesToKeep = [ NodesToKeep ]
+ return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], NodesToKeep )
pass
omniORB.registerObjref(SMESH._objref_SMESH_MeshEditor._NP_RepositoryId, meshEditor)
#
class Pattern(SMESH._objref_SMESH_Pattern):
+ def LoadFromFile(self, patternTextOrFile ):
+ text = patternTextOrFile
+ if os.path.exists( text ):
+ text = open( patternTextOrFile ).read()
+ pass
+ return SMESH._objref_SMESH_Pattern.LoadFromFile( self, text )
+
def ApplyToMeshFaces(self, theMesh, theFacesIDs, theNodeIndexOnKeyPoint1, theReverse):
decrFun = lambda i: i-1
theNodeIndexOnKeyPoint1,Parameters,hasVars = ParseParameters(theNodeIndexOnKeyPoint1, decrFun)
theMesh.SetParameters(Parameters)
return SMESH._objref_SMESH_Pattern.ApplyToHexahedrons( self, theMesh, theVolumesIDs, theNode000Index, theNode001Index )
+ def MakeMesh(self, mesh, CreatePolygons=False, CreatePolyhedra=False):
+ if isinstance( mesh, Mesh ):
+ mesh = mesh.GetMesh()
+ return SMESH._objref_SMESH_Pattern.MakeMesh( self, mesh, CreatePolygons, CreatePolyhedra )
+
# Registering the new proxy for Pattern
omniORB.registerObjref(SMESH._objref_SMESH_Pattern._NP_RepositoryId, Pattern)