## @defgroup l2_modif_invdiag Diagonal inversion of elements
## @defgroup l2_modif_unitetri Uniting triangles
## @defgroup l2_modif_changori Changing orientation of elements
-## @defgroup l2_modif_cutquadr Cutting quadrangles
+## @defgroup l2_modif_cutquadr Cutting elements
## @defgroup l2_modif_smooth Smoothing
## @defgroup l2_modif_extrurev Extrusion and Revolution
## @defgroup l2_modif_patterns Pattern mapping
[TopAbs_IN, TopAbs_OUT, TopAbs_ON, TopAbs_UNKNOWN] = range(4)
# Methods of splitting a hexahedron into tetrahedra
- Hex_5Tet, Hex_6Tet, Hex_24Tet = 1, 2, 3
+ Hex_5Tet, Hex_6Tet, Hex_24Tet, Hex_2Prisms, Hex_4Prisms = 1, 2, 3, 1, 2
def __new__(cls):
global engine
aMeshes = [ Mesh(self, self.geompyD, m) for m in aSmeshMeshes ]
return aMeshes, aStatus
- ## Creates a Mesh object importing data from the given GMF file
+ ## Creates a Mesh object importing data from the given GMF file.
+ # GMF files must have .mesh extension for the ASCII format and .meshb for
+ # the binary format.
# @return [ an instance of Mesh class, SMESH.ComputeError ]
# @ingroup l2_impexp
def CreateMeshesFromGMF( self, theFileName ):
## Creates a filter from criteria
# @param criteria a list of criteria
+ # @param binOp binary operator used when binary operator of criteria is undefined
# @return SMESH_Filter
#
# <a href="../tui_filters_page.html#tui_filters">Example of Filters usage</a>
# @ingroup l1_controls
- def GetFilterFromCriteria(self,criteria):
+ def GetFilterFromCriteria(self,criteria, binOp=SMESH.FT_LogicalAND):
+ for i in range( len( criteria ) - 1 ):
+ if criteria[i].BinaryOp == self.EnumToLong( SMESH.FT_Undefined ):
+ criteria[i].BinaryOp = self.EnumToLong( binOp )
aFilterMgr = self.CreateFilterManager()
aFilter = aFilterMgr.CreateFilter()
aFilter.SetCriteria(criteria)
if not hasattr(src1, "_narrow"): return None
src1 = src1._narrow(SMESH.SMESH_IDSource)
if not src1: return None
+ unRegister = genObjUnRegister()
if id1 != 0:
m = src1.GetMesh()
e = m.GetMeshEditor()
src1 = e.MakeIDSource([id1], SMESH.FACE)
else:
src1 = e.MakeIDSource([id1], SMESH.NODE)
+ unRegister.set( src1 )
pass
if hasattr(src2, "_narrow"):
src2 = src2._narrow(SMESH.SMESH_IDSource)
src2 = e.MakeIDSource([id2], SMESH.FACE)
else:
src2 = e.MakeIDSource([id2], SMESH.NODE)
+ unRegister.set( src2 )
pass
pass
aMeasurements = self.CreateMeasurements()
+ unRegister.set( aMeasurements )
result = aMeasurements.MinDistance(src1, src2)
- aMeasurements.UnRegister()
return result
## Get bounding box of the specified object(s)
aMeasurements.UnRegister()
return result
+ ## Get sum of lengths of all 1D elements in the mesh object.
+ # @param obj mesh, submesh or group
+ # @return sum of lengths of all 1D elements
+ # @ingroup l1_measurements
+ def GetLength(self, obj):
+ if isinstance(obj, Mesh): obj = obj.mesh
+ if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh()
+ aMeasurements = self.CreateMeasurements()
+ value = aMeasurements.Length(obj)
+ aMeasurements.UnRegister()
+ return value
+
+ ## Get sum of areas of all 2D elements in the mesh object.
+ # @param obj mesh, submesh or group
+ # @return sum of areas of all 2D elements
+ # @ingroup l1_measurements
+ def GetArea(self, obj):
+ if isinstance(obj, Mesh): obj = obj.mesh
+ if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh()
+ aMeasurements = self.CreateMeasurements()
+ value = aMeasurements.Area(obj)
+ aMeasurements.UnRegister()
+ return value
+
+ ## Get sum of volumes of all 3D elements in the mesh object.
+ # @param obj mesh, submesh or group
+ # @return sum of volumes of all 3D elements
+ # @ingroup l1_measurements
+ def GetVolume(self, obj):
+ if isinstance(obj, Mesh): obj = obj.mesh
+ if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh()
+ aMeasurements = self.CreateMeasurements()
+ value = aMeasurements.Volume(obj)
+ aMeasurements.UnRegister()
+ return value
+
+ pass # end of class smeshBuilder
+
import omniORB
#Registering the new proxy for SMESH_Gen
omniORB.registerObjref(SMESH._objref_SMESH_Gen._NP_RepositoryId, smeshBuilder)
else:
geo_name = "%s_%s to mesh"%(self.geom.GetShapeType(), id(self.geom)%100)
geompyD.addToStudy( self.geom, geo_name )
- self.mesh = self.smeshpyD.CreateMesh(self.geom)
+ self.SetMesh( self.smeshpyD.CreateMesh(self.geom) )
elif isinstance(obj, SMESH._objref_SMESH_Mesh):
self.SetMesh(obj)
else:
- self.mesh = self.smeshpyD.CreateEmptyMesh()
+ self.SetMesh( self.smeshpyD.CreateEmptyMesh() )
if name:
self.smeshpyD.SetName(self.mesh, name)
elif objHasName:
if isinstance( attr, algoCreator ):
#print "algoCreator ", attrName
setattr( self, attrName, attr.copy( self ))
+ pass
+ pass
+ pass
+ ## Destructor. Clean-up resources
+ def __del__(self):
+ if self.mesh:
+ #self.mesh.UnRegister()
+ pass
+ pass
+
## Initializes the Mesh object from an instance of SMESH_Mesh interface
# @param theMesh a SMESH_Mesh object
# @ingroup l2_construct
def SetMesh(self, theMesh):
- if self.mesh: self.mesh.UnRegister()
+ # do not call Register() as this prevents mesh servant deletion at closing study
+ #if self.mesh: self.mesh.UnRegister()
self.mesh = theMesh
if self.mesh:
- self.mesh.Register()
+ #self.mesh.Register()
self.geom = self.mesh.GetShapeToMesh()
+ pass
## Returns the mesh, that is an instance of SMESH_Mesh interface
# @return a SMESH_Mesh object
def ExportMED(self, f, auto_groups=0, version=MED_V2_2,
overwrite=1, meshPart=None, autoDimension=True):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToMED( meshPart, f, auto_groups, version, overwrite, autoDimension)
else:
self.mesh.ExportToMEDX(f, auto_groups, version, overwrite, autoDimension)
# @ingroup l2_impexp
def ExportDAT(self, f, meshPart=None):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToDAT( meshPart, f )
else:
self.mesh.ExportDAT(f)
# @ingroup l2_impexp
def ExportUNV(self, f, meshPart=None):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToUNV( meshPart, f )
else:
self.mesh.ExportUNV(f)
# @ingroup l2_impexp
def ExportSTL(self, f, ascii=1, meshPart=None):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToSTL( meshPart, f, ascii )
else:
self.mesh.ExportSTL(f, ascii)
# @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh
# @ingroup l2_impexp
def ExportCGNS(self, f, overwrite=1, meshPart=None):
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
if isinstance( meshPart, Mesh ):
meshPart = meshPart.mesh
elif not meshPart:
meshPart = self.mesh
self.mesh.ExportCGNS(meshPart, f, overwrite)
- ## Exports the mesh in a file in GMF format
+ ## Exports the mesh in a file in GMF format.
+ # GMF files must have .mesh extension for the ASCII format and .meshb for
+ # the bynary format. Other extensions are not allowed.
# @param f is the file name
# @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh
# @ingroup l2_impexp
def ExportGMF(self, f, meshPart=None):
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
if isinstance( meshPart, Mesh ):
meshPart = meshPart.mesh
elif not meshPart:
# @param opt boolean parameter for creating/not creating
# the groups Group_On_All_Nodes, Group_On_All_Faces, ...
# @param overwrite boolean parameter for overwriting/not overwriting the file
+ # @param autoDimension: if @c True (default), a space dimension of a MED mesh can be either
+ # - 1D if all mesh nodes lie on OX coordinate axis, or
+ # - 2D if all mesh nodes lie on XOY coordinate plane, or
+ # - 3D in the rest cases.
+ #
+ # If @a autoDimension is @c False, the space dimension is always 3.
# @ingroup l2_impexp
- def ExportToMED(self, f, version, opt=0, overwrite=1):
- self.mesh.ExportToMEDX(f, opt, version, overwrite)
+ def ExportToMED(self, f, version, opt=0, overwrite=1, autoDimension=True):
+ self.mesh.ExportToMEDX(f, opt, version, overwrite, autoDimension)
# Operations with groups:
# ----------------------
def GetElementGeomType(self, id):
return self.mesh.GetElementGeomType(id)
+ ## Returns the shape type of mesh element
+ # @return the value from SMESH::GeometryType enumeration
+ # @ingroup l1_meshinfo
+ def GetElementShape(self, id):
+ return self.mesh.GetElementShape(id)
+
## Returns the list of submesh elements IDs
# @param Shape a geom object(sub-shape) IOR
# Shape must be the sub-shape of a ShapeToMesh()
def GetElemFaceNodes(self,elemId, faceIndex):
return self.mesh.GetElemFaceNodes(elemId, faceIndex)
+ ## Returns three components of normal of given mesh face
+ # (or an empty array in KO case)
+ # @ingroup l1_meshinfo
+ def GetFaceNormal(self, faceId, normalized=False):
+ return self.mesh.GetFaceNormal(faceId,normalized)
+
## Returns an element based on all given nodes.
# @ingroup l1_meshinfo
def FindElementByNodes(self,nodes):
aMeasurements = self.smeshpyD.CreateMeasurements()
aMeasure = aMeasurements.MinDistance(id1, id2)
- aMeasurements.UnRegister()
+ genObjUnRegister([aMeasurements,id1, id2])
return aMeasure
## Get bounding box of the specified object(s)
if len(IDs) > 0 and isinstance(IDs[0], int):
IDs = [IDs]
srclist = []
+ unRegister = genObjUnRegister()
for o in IDs:
if isinstance(o, Mesh):
srclist.append(o.mesh)
srclist.append(self.editor.MakeIDSource(o, SMESH.FACE))
else:
srclist.append(self.editor.MakeIDSource(o, SMESH.NODE))
+ unRegister.set( srclist[-1] )
pass
pass
aMeasurements = self.smeshpyD.CreateMeasurements()
+ unRegister.set( aMeasurements )
aMeasure = aMeasurements.BoundingBox(srclist)
- aMeasurements.UnRegister()
return aMeasure
# Mesh edition (SMESH_MeshEditor functionality):
# can be retrieved from the returned object by calling GetIDs()
# @ingroup l2_modif_add
def Add0DElementsToAllNodes(self, theObject, theGroupName=""):
+ unRegister = genObjUnRegister()
if isinstance( theObject, Mesh ):
theObject = theObject.GetMesh()
if isinstance( theObject, list ):
theObject = self.GetIDSource( theObject, SMESH.ALL )
+ unRegister.set( theObject )
return self.editor.Create0DElementsOnAllNodes( theObject, theGroupName )
## Creates a ball element on a node with given ID.
# @return number of reoriented faces
# @ingroup l2_modif_changori
def Reorient2D(self, the2DObject, theDirection, theFaceOrPoint ):
+ unRegister = genObjUnRegister()
# check the2DObject
if isinstance( the2DObject, Mesh ):
the2DObject = the2DObject.GetMesh()
if isinstance( the2DObject, list ):
the2DObject = self.GetIDSource( the2DObject, SMESH.FACE )
+ unRegister.set( the2DObject )
# check theDirection
if isinstance( theDirection, geomBuilder.GEOM._objref_GEOM_Object):
theDirection = self.smeshpyD.GetDirStruct( theDirection )
# group or a list of face IDs. By default all quadrangles are split
# @ingroup l2_modif_cutquadr
def QuadTo4Tri (self, theElements=[]):
+ unRegister = genObjUnRegister()
if isinstance( theElements, Mesh ):
theElements = theElements.mesh
elif not theElements:
theElements = self.mesh
elif isinstance( theElements, list ):
theElements = self.GetIDSource( theElements, SMESH.FACE )
+ unRegister.set( theElements )
return self.editor.QuadTo4Tri( theElements )
## Splits quadrangles into triangles.
return self.editor.BestSplit(IDOfQuad, self.smeshpyD.GetFunctor(theCriterion))
## Splits volumic elements into tetrahedrons
- # @param elemIDs either list of elements or mesh or group or submesh
- # @param method flags passing splitting method: Hex_5Tet, Hex_6Tet, Hex_24Tet
- # Hex_5Tet - split the hexahedron into 5 tetrahedrons, etc
+ # @param elems either a list of elements or a mesh or a group or a submesh or a filter
+ # @param method flags passing splitting method:
+ # smesh.Hex_5Tet, smesh.Hex_6Tet, smesh.Hex_24Tet.
+ # smesh.Hex_5Tet - to split the hexahedron into 5 tetrahedrons, etc.
+ # @ingroup l2_modif_cutquadr
+ def SplitVolumesIntoTetra(self, elems, method=smeshBuilder.Hex_5Tet ):
+ unRegister = genObjUnRegister()
+ if isinstance( elems, Mesh ):
+ elems = elems.GetMesh()
+ if ( isinstance( elems, list )):
+ elems = self.editor.MakeIDSource(elems, SMESH.VOLUME)
+ unRegister.set( elems )
+ self.editor.SplitVolumesIntoTetra(elems, method)
+
+ ## Splits hexahedra into prisms
+ # @param elems either a list of elements or a mesh or a group or a submesh or a filter
+ # @param startHexPoint a point used to find a hexahedron for which @a facetNormal
+ # gives a normal vector defining facets to split into triangles.
+ # @a startHexPoint can be either a triple of coordinates or a vertex.
+ # @param facetNormal a normal to a facet to split into triangles of a
+ # hexahedron found by @a startHexPoint.
+ # @a facetNormal can be either a triple of coordinates or an edge.
+ # @param method flags passing splitting method: smesh.Hex_2Prisms, smesh.Hex_4Prisms.
+ # smesh.Hex_2Prisms - to split the hexahedron into 2 prisms, etc.
+ # @param allDomains if @c False, only hexahedra adjacent to one closest
+ # to @a startHexPoint are split, else @a startHexPoint
+ # is used to find the facet to split in all domains present in @a elems.
# @ingroup l2_modif_cutquadr
- def SplitVolumesIntoTetra(self, elemIDs, method=smeshBuilder.Hex_5Tet ):
- if isinstance( elemIDs, Mesh ):
- elemIDs = elemIDs.GetMesh()
- if ( isinstance( elemIDs, list )):
- elemIDs = self.editor.MakeIDSource(elemIDs, SMESH.VOLUME)
- self.editor.SplitVolumesIntoTetra(elemIDs, method)
+ def SplitHexahedraIntoPrisms(self, elems, startHexPoint, facetNormal,
+ method=smeshBuilder.Hex_2Prisms, allDomains=False ):
+ # IDSource
+ unRegister = genObjUnRegister()
+ if isinstance( elems, Mesh ):
+ elems = elems.GetMesh()
+ if ( isinstance( elems, list )):
+ elems = self.editor.MakeIDSource(elems, SMESH.VOLUME)
+ unRegister.set( elems )
+ pass
+ # axis
+ if isinstance( startHexPoint, geomBuilder.GEOM._objref_GEOM_Object):
+ startHexPoint = self.geompyD.PointCoordinates( startHexPoint )
+ if isinstance( facetNormal, geomBuilder.GEOM._objref_GEOM_Object):
+ facetNormal = self.geompyD.VectorCoordinates( facetNormal )
+ axis = SMESH.AxisStruct( startHexPoint[0], startHexPoint[1], startHexPoint[2],
+ facetNormal[0], facetNormal[1], facetNormal[2])
+ self.mesh.SetParameters( axis.parameters )
+
+ self.editor.SplitHexahedraIntoPrisms(elems, method, axis, allDomains)
## Splits quadrangle faces near triangular facets of volumes
#
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method is Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def Smooth(self, IDsOfElements, IDsOfFixedNodes,
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method is Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def SmoothObject(self, theObject, IDsOfFixedNodes,
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method is Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def SmoothParametric(self, IDsOfElements, IDsOfFixedNodes,
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def SmoothParametricObject(self, theObject, IDsOfFixedNodes,
# the new mesh else only boundary elements will be copied into the new mesh
# @param toCopyExistingBondary - if true, not only new but also pre-existing
# boundary elements will be copied into the new mesh
- # @return tuple (mesh, group) where bondary elements were added to
+ # @return tuple (mesh, group) where boundary elements were added to
# @ingroup l2_modif_edit
def MakeBoundaryMesh(self, elements, dimension=SMESH.BND_2DFROM3D, groupName="", meshName="",
toCopyElements=False, toCopyExistingBondary=False):
+ unRegister = genObjUnRegister()
if isinstance( elements, Mesh ):
elements = elements.GetMesh()
if ( isinstance( elements, list )):
elemType = SMESH.ALL
if elements: elemType = self.GetElementType( elements[0], iselem=True)
elements = self.editor.MakeIDSource(elements, elemType)
+ unRegister.set( elements )
mesh, group = self.editor.MakeBoundaryMesh(elements,dimension,groupName,meshName,
toCopyElements,toCopyExistingBondary)
if mesh: mesh = self.smeshpyD.Mesh(mesh)
# @param LinearVariation forces the computation of rotation angles as linear
# variation of the given Angles along path steps
# @param HasRefPoint allows using the reference point
- # @param RefPoint the point around which the shape is rotated (the mass center of the shape by default).
+ # @param RefPoint the point around which the elements are rotated (the mass
+ # center of the elements by default).
# The User can specify any point as the Reference Point.
+ # RefPoint can be either GEOM Vertex, [x,y,z] or SMESH.PointStruct
# @param MakeGroups forces the generation of new groups from existing ones
# @param ElemType type of elements for extrusion (if param Base is a mesh)
# @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error if MakeGroups=True,
def ExtrusionAlongPathX(self, Base, Path, NodeStart,
HasAngles, Angles, LinearVariation,
HasRefPoint, RefPoint, MakeGroups, ElemType):
- if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)):
+ if isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object):
RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
pass
+ elif isinstance( RefPoint, list ):
+ RefPoint = PointStruct(*RefPoint)
+ pass
Angles,AnglesParameters,hasVars = ParseAngles(Angles)
Parameters = AnglesParameters + var_separator + RefPoint.parameters
self.mesh.SetParameters(Parameters)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True,
# empty list otherwise
def Scale(self, theObject, thePoint, theScaleFact, Copy, MakeGroups=False):
+ unRegister = genObjUnRegister()
if ( isinstance( theObject, Mesh )):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
theObject = self.GetIDSource(theObject, SMESH.ALL)
+ unRegister.set( theObject )
if ( isinstance( theScaleFact, float )):
theScaleFact = [theScaleFact]
if ( isinstance( theScaleFact, int )):
# @param NewMeshName - the name of the newly created mesh
# @return instance of Mesh class
def ScaleMakeMesh(self, theObject, thePoint, theScaleFact, MakeGroups=False, NewMeshName=""):
+ unRegister = genObjUnRegister()
if (isinstance(theObject, Mesh)):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
theObject = self.GetIDSource(theObject,SMESH.ALL)
+ unRegister.set( theObject )
if ( isinstance( theScaleFact, float )):
theScaleFact = [theScaleFact]
if ( isinstance( theScaleFact, int )):
self.mesh.SetParameters(Parameters)
return Mesh( self.smeshpyD, self.geompyD, mesh )
- ## Finds groups of ajacent nodes within Tolerance.
+ ## Finds groups of adjacent nodes within Tolerance.
# @param Tolerance the value of tolerance
- # @return the list of groups of nodes
+ # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def FindCoincidentNodes (self, Tolerance):
return self.editor.FindCoincidentNodes(Tolerance)
# @param Tolerance the value of tolerance
# @param SubMeshOrGroup SubMesh or Group
# @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search
- # @return the list of groups of nodes
+ # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[]):
+ unRegister = genObjUnRegister()
if (isinstance( SubMeshOrGroup, Mesh )):
SubMeshOrGroup = SubMeshOrGroup.GetMesh()
if not isinstance( exceptNodes, list):
exceptNodes = [ exceptNodes ]
if exceptNodes and isinstance( exceptNodes[0], int):
exceptNodes = [ self.GetIDSource( exceptNodes, SMESH.NODE)]
+ unRegister.set( exceptNodes )
return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,exceptNodes)
## Merges nodes
- # @param GroupsOfNodes the list of groups of nodes
+ # @param GroupsOfNodes a list of pairs of nodes IDs for merging (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def MergeNodes (self, GroupsOfNodes):
self.editor.MergeNodes(GroupsOfNodes)
## Finds the elements built on the same nodes.
# @param MeshOrSubMeshOrGroup Mesh or SubMesh, or Group of elements for searching
- # @return a list of groups of equal elements
+ # @return the list of pairs of equal elements IDs (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def FindEqualElements (self, MeshOrSubMeshOrGroup):
if ( isinstance( MeshOrSubMeshOrGroup, Mesh )):
return self.editor.FindEqualElements(MeshOrSubMeshOrGroup)
## Merges elements in each given group.
- # @param GroupsOfElementsID groups of elements for merging
+ # @param GroupsOfElementsID a list of pairs of elements IDs for merging (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def MergeElements(self, GroupsOfElementsID):
self.editor.MergeElements(GroupsOfElementsID)
# @return a group where the new elements are added. None if theGroupName == "".
# @ingroup l2_modif_edit
def DoubleElements(self, theElements, theGroupName=""):
+ unRegister = genObjUnRegister()
if isinstance( theElements, Mesh ):
theElements = theElements.mesh
elif isinstance( theElements, list ):
theElements = self.GetIDSource( theElements, SMESH.ALL )
+ unRegister.set( theElements )
return self.editor.DoubleElements(theElements, theGroupName)
## Creates a hole in a mesh by doubling the nodes of some particular elements
val = 0
return val
- ## Get length of 1D element.
- # @param elemId mesh element ID
- # @return element's length value
+ ## Get length of 1D element or sum of lengths of all 1D mesh elements
+ # @param elemId mesh element ID (if not defined - sum of length of all 1D elements will be calculated)
+ # @return element's length value if \a elemId is specified or sum of all 1D mesh elements' lengths otherwise
# @ingroup l1_measurements
- def GetLength(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Length, elemId)
+ def GetLength(self, elemId=None):
+ length = 0
+ if elemId == None:
+ length = self.smeshpyD.GetLength(self)
+ else:
+ length = self._valueFromFunctor(SMESH.FT_Length, elemId)
+ return length
- ## Get area of 2D element.
- # @param elemId mesh element ID
- # @return element's area value
+ ## Get area of 2D element or sum of areas of all 2D mesh elements
+ # @param elemId mesh element ID (if not defined - sum of areas of all 2D elements will be calculated)
+ # @return element's area value if \a elemId is specified or sum of all 2D mesh elements' areas otherwise
# @ingroup l1_measurements
- def GetArea(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Area, elemId)
+ def GetArea(self, elemId=None):
+ area = 0
+ if elemId == None:
+ area = self.smeshpyD.GetArea(self)
+ else:
+ area = self._valueFromFunctor(SMESH.FT_Area, elemId)
+ return area
- ## Get volume of 3D element.
- # @param elemId mesh element ID
- # @return element's volume value
+ ## Get volume of 3D element or sum of volumes of all 3D mesh elements
+ # @param elemId mesh element ID (if not defined - sum of volumes of all 3D elements will be calculated)
+ # @return element's volume value if \a elemId is specified or sum of all 3D mesh elements' volumes otherwise
# @ingroup l1_measurements
- def GetVolume(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+ def GetVolume(self, elemId=None):
+ volume = 0
+ if elemId == None:
+ volume = self.smeshpyD.GetVolume(self)
+ else:
+ volume = self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+ return volume
## Get maximum element length.
# @param elemId mesh element ID
raise ValueError, detail # wrong variable name
return result
+ pass
+
+# A helper class that call UnRegister() of SALOME.GenericObj'es stored in it
+class genObjUnRegister:
+
+ def __init__(self, genObj=None):
+ self.genObjList = []
+ self.set( genObj )
+ return
+
+ def set(self, genObj):
+ "Store one or a list of of SALOME.GenericObj'es"
+ if isinstance( genObj, list ):
+ self.genObjList.extend( genObj )
+ else:
+ self.genObjList.append( genObj )
+ return
+
+ def __del__(self):
+ for genObj in self.genObjList:
+ if genObj and hasattr( genObj, "UnRegister" ):
+ genObj.UnRegister()
for pluginName in os.environ[ "SMESH_MeshersList" ].split( ":" ):
#
try:
exec( "from salome.%s.%s import *" % (pluginName, pluginBuilderName))
except Exception, e:
- print "Exception while loading %s: %s" % ( pluginBuilderName, e )
+ from salome_utils import verbose
+ if verbose(): print "Exception while loading %s: %s" % ( pluginBuilderName, e )
continue
exec( "from salome.%s import %s" % (pluginName, pluginBuilderName))
plugin = eval( pluginBuilderName )