# on curve from 0 to 1 (additionally it is neecessary to check
# orientation of edges and create list of reversed edges if it is
# needed) and sets numbers of segments between given points (default
- # values are equals 1
+ # values are 1)
# @param points defines the list of parameters on curve
# @param nbSegs defines the list of numbers of segments
# @param reversedEdges is a list of edges to mesh using reversed orientation.
def LengthNearVertex(self, length, vertex=0, UseExisting=0):
import types
store_geom = self.geom
- if type(vertex) is types.IntType:
+ if isinstance(vertex, int):
if vertex == 0 or vertex == 1:
from salome.geom import geomBuilder
vertex = self.mesh.geompyD.ExtractShapes(self.geom, geomBuilder.geomBuilder.ShapeType["VERTEX"],True)[vertex]
pass
# 0D algorithm
if self.geom is None:
- raise RuntimeError, "Attemp to create SegmentAroundVertex_0D algoritm on None shape"
+ self.geom = store_geom
+ raise RuntimeError("Attempt to create SegmentAroundVertex_0D algorithm on None shape")
from salome.smesh.smeshBuilder import AssureGeomPublished, GetName, TreatHypoStatus
AssureGeomPublished( self.mesh, self.geom )
name = GetName(self.geom)
## Return 3D hypothesis holding the 1D one
def Get3DHypothesis(self):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
return self.distribHyp
# hypothesis. Returns the created hypothesis
def OwnHypothesis(self, hypType, args=[], so="libStdMeshersEngine.so"):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
if not self.nbLayers is None:
self.mesh.GetMesh().RemoveHypothesis( self.geom, self.nbLayers )
# the same parameters, else (default) - creates a new one
def NumberOfLayers(self, n, UseExisting=0):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
self.mesh.RemoveHypothesis( self.distribHyp, self.geom )
from salome.smesh.smeshBuilder import IsEqual
# @param p the precision of rounding
def LocalLength(self, l, p=1e-07):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
hyp = self.OwnHypothesis("LocalLength", [l,p])
hyp.SetLength(l)
# @param s the scale factor (optional)
def NumberOfSegments(self, n, s=[]):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
if not s:
hyp = self.OwnHypothesis("NumberOfSegments", [n])
# @param end the length of the last segment
def Arithmetic1D(self, start, end ):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
hyp = self.OwnHypothesis("Arithmetic1D", [start, end])
hyp.SetLength(start, 1)
# @param ratio the common ratio of the geometric progression
def GeometricProgression(self, start, ratio ):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
hyp = self.OwnHypothesis("GeometricProgression", [start, ratio])
hyp.SetStartLength( start )
# @param end for the length of the last segment
def StartEndLength(self, start, end):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
hyp = self.OwnHypothesis("StartEndLength", [start, end])
hyp.SetLength(start, 1)
# @param fineness defines the quality of the mesh within the range [0-1]
def AutomaticLength(self, fineness=0):
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorith doesn't support any hyposesis"
+ print("Prism_3D algorith doesn't support any hyposesis")
return None
hyp = self.OwnHypothesis("AutomaticLength")
hyp.SetFineness( fineness )
# several functions, they must be accompanied by relative coordinates of
# points dividing the whole shape into ranges where the functions apply; points
# coodrinates should vary within (0.0, 1.0) range. Parameter \a t of the spacing
- # function f(t) varies from 0.0 to 1.0 witin a shape range.
+ # function f(t) varies from 0.0 to 1.0 within a shape range.
# Examples:
# - "10.5" - defines a grid with a constant spacing
# - [["1", "1+10*t", "11"] [0.1, 0.6]] - defines different spacing in 3 ranges.
self.mesh.AddHypothesis( self.hyp, self.geom )
for axis, gridDef in enumerate( [xGridDef, yGridDef, zGridDef] ):
- if not gridDef: raise ValueError, "Empty grid definition"
+ if not gridDef: raise ValueError("Empty grid definition")
if isinstance( gridDef, str ):
self.hyp.SetGridSpacing( [gridDef], [], axis )
elif isinstance( gridDef[0], str ):
pass # end of StdMeshersBuilder_Cartesian_3D class
## Defines a stub 1D algorithm, which enables "manual" creation of nodes and
-# segments usable by 2D algoritms
+# segments usable by 2D algorithms
#
# It is created by calling smeshBuilder.Mesh.UseExistingSegments(geom=0)
#
pass # end of StdMeshersBuilder_UseExisting_1D class
## Defines a stub 2D algorithm, which enables "manual" creation of nodes and
-# faces usable by 3D algoritms
+# faces usable by 3D algorithms
#
# It is created by calling smeshBuilder.Mesh.UseExistingFaces(geom=0)
#