-# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
COMPOSITE = "CompositeSegment_1D"
"""
-
Algorithm type: Composite segment 1D algorithm, see :class:`~StdMeshersBuilder.StdMeshersBuilder_CompositeSegment`
"""
-MEFISTO = "MEFISTO_2D"
-"""
-Algorithm type: Triangle MEFISTO 2D algorithm, see :class:`~StdMeshersBuilder.StdMeshersBuilder_Triangle_MEFISTO`
-"""
Hexa = "Hexa_3D"
"""
Algorithm type: Polygon Per Face 2D algorithm, see :class:`~StdMeshersBuilder.StdMeshersBuilder_PolygonPerFace`
"""
+POLYHEDRON = "PolyhedronPerSolid_3D"
+"""
+Algorithm type: Polyhedron Per Solid 3D algorithm, see :class:`~StdMeshersBuilder.StdMeshersBuilder_PolyhedronPerSolid`
+"""
+
# import items of enums
for e in StdMeshers.QuadType._items: exec('%s = StdMeshers.%s'%(e,e))
for e in StdMeshers.VLExtrusionMethod._items: exec('%s = StdMeshers.%s'%(e,e))
of smeshBuilder.Mesh class
"""
- docHelper = "Creates segment 1D algorithm for edges"
+ docHelper = "Create segment 1D algorithm for edges"
"""
doc string of the method
"""
Parameters:
l : for the length of segments that cut an edge
UseExisting : if == true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
p : precision, used for calculation of the number of segments.
The precision should be a positive, meaningful value within the range [0,1].
In general, the number of segments is calculated with the formula:
length : is optional maximal allowed length of segment, if it is omitted
the preestimated length is used that depends on geometry size
UseExisting : if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_MaxLength hypothesis
hyp = self.Hypothesis("MaxLength", [length], UseExisting=UseExisting)
- if length > 0.0:
+ if isinstance(length,str) or length > 0:
# set given length
hyp.SetLength(length)
if not UseExisting:
# set preestimated length
+ import SMESH
gen = self.mesh.smeshpyD
initHyp = gen.GetHypothesisParameterValues("MaxLength", "libStdMeshersEngine.so",
self.mesh.GetMesh(), self.mesh.GetShape(),
- False) # <- byMesh
+ SMESH.HypInitParams( 1, 1.0, False ))
preHyp = initHyp._narrow(StdMeshers.StdMeshers_MaxLength)
if preHyp:
hyp.SetPreestimatedLength( preHyp.GetPreestimatedLength() )
def NumberOfSegments(self, n, s=[], reversedEdges=[], UseExisting=0):
"""
- Defines "NumberOfSegments" hypothesis to cut an edge in a fixed number of segments
+ Defines "NumberOfSegments" hypothesis to cut an edge in a fixed number of segments
Parameters:
n: for the number of segments that cut an edge
s: for the scale factor (optional)
reversedEdges: is a list of edges to mesh using reversed orientation.
- A list item can also be a tuple (edge, 1st_vertex_of_edge)
+ A list item can also be a tuple (edge, 1st_vertex_of_edge)
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - create a new one
+ the same parameters, else (default) - create a new one
Returns:
- an instance of StdMeshers_NumberOfSegments hypothesis
+ an instance of StdMeshers_NumberOfSegments hypothesis
"""
-
+
if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges
reversedEdges, UseExisting = [], reversedEdges
entry = self.MainShapeEntry()
def _compareNumberOfSegments(self, hyp, args):
"""
- Private method
- Checks if the given "NumberOfSegments" hypothesis has the same parameters as the given arguments
+ Private method
+ Checks if the given "NumberOfSegments" hypothesis has the same parameters as the given arguments
"""
if hyp.GetNumberOfSegments() == args[0]:
if len(args) == 3:
maxSize: defines the maximal allowed segment length
deflection: defines the maximal allowed distance from a segment to an edge
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_Adaptive1D hypothesis
"""
-
+
from salome.smesh.smeshBuilder import IsEqual
compFun = lambda hyp, args: ( IsEqual(hyp.GetMinSize(), args[0]) and \
IsEqual(hyp.GetMaxSize(), args[1]) and \
return hyp
def Arithmetic1D(self, start, end, reversedEdges=[], UseExisting=0):
- """
- Defines "Arithmetic1D" hypothesis to cut an edge in several segments with a length
- that changes in arithmetic progression
-
- Parameters:
- start: defines the length of the first segment
- end: defines the length of the last segment
- reversedEdges: is a list of edges to mesh using reversed orientation.
- A list item can also be a tuple (edge, 1st_vertex_of_edge)
- UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
-
- Returns:
- an instance of StdMeshers_Arithmetic1D hypothesis
- """
+ """
+ Defines "Arithmetic1D" hypothesis to cut an edge in several segments with a length
+ that changes in arithmetic progression
+
+ Parameters:
+ start: defines the length of the first segment
+ end: defines the length of the last segment
+ reversedEdges: is a list of edges to mesh using reversed orientation.
+ A list item can also be a tuple (edge, 1st_vertex_of_edge)
+ UseExisting: if ==true - searches for an existing hypothesis created with
+ the same parameters, else (default) - Create a new one
+
+ Returns:
+ an instance of StdMeshers_Arithmetic1D hypothesis
+ """
if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges
reversedEdges, UseExisting = [], reversedEdges
return hyp
def GeometricProgression(self, start, ratio, reversedEdges=[], UseExisting=0):
- """
- Defines "GeometricProgression" hypothesis to cut an edge in several
- segments with a length that changes in Geometric progression
-
- Parameters:
- start: defines the length of the first segment
- ratio: defines the common ratio of the geometric progression
- reversedEdges: is a list of edges to mesh using reversed orientation.
- A list item can also be a tuple (edge, 1st_vertex_of_edge)
- UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
-
- Returns:
- an instance of StdMeshers_Geometric1D hypothesis
- """
+ """
+ Defines "GeometricProgression" hypothesis to cut an edge in several
+ segments with a length that changes in Geometric progression
+
+ Parameters:
+ start: defines the length of the first segment
+ ratio: defines the common ratio of the geometric progression
+ reversedEdges: is a list of edges to mesh using reversed orientation.
+ A list item can also be a tuple (edge, 1st_vertex_of_edge)
+ UseExisting: if ==true - searches for an existing hypothesis created with
+ the same parameters, else (default) - Create a new one
+
+ Returns:
+ an instance of StdMeshers_Geometric1D hypothesis
+ """
reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges)
entry = self.MainShapeEntry()
def FixedPoints1D(self, points, nbSegs=[1], reversedEdges=[], UseExisting=0):
"""
- Defines "FixedPoints1D" hypothesis to cut an edge using parameter
- on curve from 0 to 1 (additionally it is neecessary to check
- orientation of edges and create list of reversed edges if it is
- needed) and sets numbers of segments between given points (default
- values are 1)
-
- Parameters:
- points: defines the list of parameters on curve
- nbSegs: defines the list of numbers of segments
- reversedEdges: is a list of edges to mesh using reversed orientation.
- A list item can also be a tuple (edge, 1st_vertex_of_edge)
- UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
-
- Returns:
- an instance of StdMeshers_FixedPoints1D hypothesis
- """
+ Defines "FixedPoints1D" hypothesis to cut an edge using parameter
+ on curve from 0 to 1 (additionally it is neecessary to check
+ orientation of edges and create list of reversed edges if it is
+ needed) and sets numbers of segments between given points (default
+ values are 1)
+
+ Parameters:
+ points: defines the list of parameters on curve
+ nbSegs: defines the list of numbers of segments
+ reversedEdges: is a list of edges to mesh using reversed orientation.
+ A list item can also be a tuple (edge, 1st_vertex_of_edge)
+ UseExisting: if ==true - searches for an existing hypothesis created with
+ the same parameters, else (default) - Create a new one
+
+ Returns:
+ an instance of StdMeshers_FixedPoints1D hypothesis
+ """
if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges
reversedEdges, UseExisting = [], reversedEdges
reversedEdges: is a list of edges to mesh using reversed orientation.
A list item can also be a tuple (edge, 1st_vertex_of_edge)
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_StartEndLength hypothesis
"""
-
+
if not isinstance(reversedEdges,list): #old version script, before adding reversedEdges
reversedEdges, UseExisting = [], reversedEdges
reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges)
return hyp
def Deflection1D(self, d, UseExisting=0):
- """
- Defines "Deflection1D" hypothesis
+ """
+ Defines "Deflection1D" hypothesis
- Parameters:
+ Parameters:
d: for the deflection
UseExisting: if ==true - searches for an existing hypothesis created with
the same parameters, else (default) - create a new one
- """
+ """
from salome.smesh.smeshBuilder import IsEqual
compFun = lambda hyp, args: IsEqual(hyp.GetDeflection(), args[0])
return hyp
def Propagation(self):
- """
- Defines "Propagation" hypothesis that propagates 1D hypotheses
- from an edge where this hypothesis is assigned to
- on all other edges that are at the opposite side in case of quadrangular faces
- This hypothesis should be assigned to an edge to propagate a hypothesis from.
- """
+ """
+ Defines "Propagation" hypothesis that propagates 1D hypotheses
+ from an edge where this hypothesis is assigned to
+ on all other edges that are at the opposite side in case of quadrangular faces
+ This hypothesis should be assigned to an edge to propagate a hypothesis from.
+ """
return self.Hypothesis("Propagation", UseExisting=1, CompareMethod=self.CompareEqualHyp)
def PropagationOfDistribution(self):
- """
- Defines "Propagation of Node Distribution" hypothesis that propagates
- distribution of nodes from an edge where this hypothesis is assigned to,
- to opposite edges of quadrangular faces, so that number of segments on all these
- edges will be the same, as well as relations between segment lengths.
- """
+ """
+ Defines "Propagation of Node Distribution" hypothesis that propagates
+ distribution of nodes from an edge where this hypothesis is assigned to,
+ to opposite edges of quadrangular faces, so that number of segments on all these
+ edges will be the same, as well as relations between segment lengths.
+ """
return self.Hypothesis("PropagOfDistribution", UseExisting=1,
CompareMethod=self.CompareEqualHyp)
def AutomaticLength(self, fineness=0, UseExisting=0):
- """
- Defines "AutomaticLength" hypothesis
-
- Parameters:
- fineness: for the fineness [0-1]
- UseExisting: if ==true - searches for an existing hypothesis created with the
- same parameters, else (default) - create a new one
- """
+ """
+ Defines "AutomaticLength" hypothesis
+
+ Parameters:
+ fineness: for the fineness [0-1]
+ UseExisting: if ==true - searches for an existing hypothesis created with the
+ same parameters, else (default) - create a new one
+ """
from salome.smesh.smeshBuilder import IsEqual
compFun = lambda hyp, args: IsEqual(hyp.GetFineness(), args[0])
hyp.SetFineness( fineness )
return hyp
- def LengthNearVertex(self, length, vertex=0, UseExisting=0):
- """
- Defines "SegmentLengthAroundVertex" hypothesis
-
- Parameters:
- length: for the segment length
- vertex: for the length localization: the vertex index [0,1] | vertex object.
- Any other integer value means that the hypothesis will be set on the
- whole 1D shape, where Mesh_Segment algorithm is assigned.
- UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
- """
+ def LengthNearVertex(self, length, vertex=-1, UseExisting=0):
+ """
+ Defines "SegmentLengthAroundVertex" hypothesis
+
+ Parameters:
+ length: for the segment length
+ vertex: for the length localization: the vertex index [0,1] | vertex object.
+ Any other integer value means that the hypothesis will be set on the
+ whole 1D shape, where Mesh_Segment algorithm is assigned.
+ UseExisting: if ==true - searches for an existing hypothesis created with
+ the same parameters, else (default) - Create a new one
+ """
import types
store_geom = self.geom
- if type(vertex) is types.IntType:
+ if isinstance(vertex, int):
if vertex == 0 or vertex == 1:
from salome.geom import geomBuilder
vertex = self.mesh.geompyD.ExtractShapes(self.geom, geomBuilder.geomBuilder.ShapeType["VERTEX"],True)[vertex]
# 0D algorithm
if self.geom is None:
self.geom = store_geom
- raise RuntimeError, "Attempt to create SegmentAroundVertex_0D algorithm on None shape"
+ raise RuntimeError("Attempt to create SegmentAroundVertex_0D algorithm on None shape")
from salome.smesh.smeshBuilder import AssureGeomPublished, GetName, TreatHypoStatus
AssureGeomPublished( self.mesh, self.geom )
name = GetName(self.geom)
return hyp
def QuadraticMesh(self):
- """
- Defines "QuadraticMesh" hypothesis, forcing construction of quadratic edges.
- If the 2D mesher sees that all boundary edges are quadratic,
- it generates quadratic faces, else it generates linear faces using
- medium nodes as if they are vertices.
- The 3D mesher generates quadratic volumes only if all boundary faces
- are quadratic, else it fails.
- """
-
+ """
+ Defines "QuadraticMesh" hypothesis, forcing construction of quadratic edges.
+ If the 2D mesher sees that all boundary edges are quadratic,
+ it generates quadratic faces, else it generates linear faces using
+ medium nodes as if they are vertices.
+ The 3D mesher generates quadratic volumes only if all boundary faces
+ are quadratic, else it fails.
+ """
+
hyp = self.Hypothesis("QuadraticMesh", UseExisting=1, CompareMethod=self.CompareEqualHyp)
return hyp
of smeshBuilder.Mesh class
"""
- docHelper = "Creates segment 1D algorithm for edges"
+ docHelper = "Create segment 1D algorithm for edges"
"""
doc string of the method
"""
class StdMeshersBuilder_Segment_Python(Mesh_Algorithm):
"""
- Defines a segment 1D algorithm for discretization of edges with Python function
- It is created by calling smeshBuilder.Mesh.Segment(smeshBuilder.PYTHON,geom=0)
+ Defines a segment 1D algorithm for discretization of edges with Python function.
+ It is created by calling smeshBuilder.Mesh.Segment(smeshBuilder.PYTHON,geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates segment 1D algorithm for edges"
+ docHelper = "Create segment 1D algorithm for edges"
"""
doc string of the method
"""
n: for the number of segments that cut an edge
func: for the python function that calculates the length of all segments
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
compFun = lambda hyp, args: False
pass # end of StdMeshersBuilder_Segment_Python class
-class StdMeshersBuilder_Triangle_MEFISTO(Mesh_Algorithm):
- """
- Triangle MEFISTO 2D algorithm
- It is created by calling smeshBuilder.Mesh.Triangle(smeshBuilder.MEFISTO,geom=0)
- """
-
-
- meshMethod = "Triangle"
- """
- name of the dynamic method in smeshBuilder.Mesh class
- """
- algoType = MEFISTO
- """
- type of algorithm used with helper function in smeshBuilder.Mesh class
- """
- isDefault = True
- """
- flag pointing whether this algorithm should be used by default in dynamic method
- of smeshBuilder.Mesh class
- """
- docHelper = "Creates triangle 2D algorithm for faces"
- """
- doc string of the method
- """
-
- def __init__(self, mesh, geom=0):
- """
- Private constructor.
-
- Parameters:
- mesh: parent mesh object algorithm is assigned to
- geom: geometry (shape/sub-shape) algorithm is assigned to;
- if it is :code:`0` (default), the algorithm is assigned to the main shape
- """
- Mesh_Algorithm.__init__(self)
- self.Create(mesh, geom, self.algoType)
- pass
-
- def MaxElementArea(self, area, UseExisting=0):
- """
- Defines "MaxElementArea" hypothesis basing on the definition of the maximum area of each triangle
-
- Parameters:
- area: for the maximum area of each triangle
- UseExisting: if ==true - searches for an existing hypothesis created with the
- same parameters, else (default) - creates a new one
- """
-
- from salome.smesh.smeshBuilder import IsEqual
- comparator = lambda hyp, args: IsEqual(hyp.GetMaxElementArea(), args[0])
- hyp = self.Hypothesis("MaxElementArea", [area], UseExisting=UseExisting,
- CompareMethod=comparator)
- hyp.SetMaxElementArea(area)
- return hyp
-
- def LengthFromEdges(self):
- """
- Defines "LengthFromEdges" hypothesis to build triangles
- based on the length of the edges taken from the wire
- """
-
- hyp = self.Hypothesis("LengthFromEdges", UseExisting=1, CompareMethod=self.CompareEqualHyp)
- return hyp
-
- pass # end of StdMeshersBuilder_Triangle_MEFISTO class
-
class StdMeshersBuilder_Quadrangle(Mesh_Algorithm):
"""
- Defines a quadrangle 2D algorithm
+ Defines a quadrangle 2D algorithm.
It is created by calling smeshBuilder.Mesh.Quadrangle(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates quadrangle 2D algorithm for faces"
+ docHelper = "Create quadrangle 2D algorithm for faces"
"""
doc string of the method
"""
pass
def QuadrangleParameters(self, quadType=StdMeshers.QUAD_STANDARD, triangleVertex=0,
- enfVertices=[],enfPoints=[],UseExisting=0):
+ enfVertices=[],enfPoints=[],corners=[],UseExisting=0):
"""
Defines "QuadrangleParameters" hypothesis
quadType defines the algorithm of transition between differently descretized
or triples of values ([[x1,y1,z1], [x2,y2,z2], ...]).
In the case if the defined QuadrangleParameters() refer to a sole face,
all given points must lie on this face, else the mesher fails.
+ corners: list of vertices that should be used as quadrangle corners.
+ The parameter can be useful for faces with more than four vertices,
+ since in some cases Quadrangle Mapping algorithm chooses corner vertices
+ differently than it is desired.
+ A hypothesis can be global and define corners for all CAD faces that
+ require it, but be sure that each specified vertex is a corner in all
+ faces the hypothesis will be applied to.
UseExisting: if *True* - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
if isinstance( enfVertices, int ) and not enfPoints and not UseExisting:
# a call of old syntax, before inserting enfVertices and enfPoints before UseExisting
UseExisting, enfVertices = enfVertices, []
+
pStructs, xyz = [], []
for p in enfPoints:
if isinstance( p, SMESH.PointStruct ):
self.params = self.Hypothesis("QuadrangleParams", [quadType,vertexID,entries,xyz],
UseExisting = UseExisting, CompareMethod=compFun)
pass
+
+ if corners and isinstance( corners[0], GEOM._objref_GEOM_Object ):
+ corners = [ self.mesh.geompyD.GetSubShapeID( self.mesh.geom, v ) for v in corners ]
+
if self.params.GetQuadType() != quadType:
self.params.SetQuadType(quadType)
if vertexID > 0:
for v in enfVertices:
AssureGeomPublished( self.mesh, v )
self.params.SetEnforcedNodes( enfVertices, pStructs )
+ self.params.SetCorners( corners )
return self.params
def QuadranglePreference(self, reversed=False, UseExisting=0):
quadrangles are built in the transition area along the finer meshed sides,
if the total quantity of segments on all four sides of the face is even.
- Parameters:
+ Parameters:
reversed: if True, transition area is located along the coarser meshed sides.
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
-
+
if reversed:
return self.QuadrangleParameters(QUAD_QUADRANGLE_PREF_REVERSED,UseExisting=UseExisting)
return self.QuadrangleParameters(QUAD_QUADRANGLE_PREF,UseExisting=UseExisting)
Parameters:
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
return self.QuadrangleParameters(QUAD_TRIANGLE_PREF,UseExisting=UseExisting)
Parameters:
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
return self.QuadrangleParameters(QUAD_REDUCED,UseExisting=UseExisting)
Vertex can be either a GEOM_Object or a vertex ID within the
shape to mesh
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
return self.QuadrangleParameters(QUAD_STANDARD,vertex,UseExisting)
class StdMeshersBuilder_Hexahedron(Mesh_Algorithm):
"""
- Defines a hexahedron 3D algorithm
+ Defines a hexahedron 3D algorithm.
It is created by calling smeshBuilder.Mesh.Hexahedron(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates hexahedron 3D algorithm for volumes"
+ docHelper = "Create hexahedron 3D algorithm for volumes"
"""
doc string of the method
"""
"""
Mesh_Algorithm.__init__(self)
self.Create(mesh, geom, Hexa)
+ self.renumHypothesis = 0
pass
+ def Renumber(self, blockCSList=[] ):
+ if isinstance( blockCSList, StdMeshers.BlockCS ):
+ blockCSList = [blockCSList]
+ if not self.renumHypothesis:
+ self.renumHypothesis = self.Hypothesis("BlockRenumber", blockCSList, UseExisting=0)
+ self.renumHypothesis.SetBlocksOrientation( blockCSList )
+ return self.renumHypothesis
+
pass # end of StdMeshersBuilder_Hexahedron class
class StdMeshersBuilder_Projection1D(Mesh_Algorithm):
"""
- Defines a projection 1D algorithm
+ Defines a projection 1D algorithm.
It is created by calling smeshBuilder.Mesh.Projection1D(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 1D algorithm for edges"
+ docHelper = "Create projection 1D algorithm for edges"
"""
doc string of the method
"""
srcV: a vertex of *edge* to associate with *tgtV* (optional)
tgtV: a vertex of *the edge* to which the algorithm is assigned, to associate with *srcV* (optional)
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
from salome.smesh.smeshBuilder import AssureGeomPublished, Mesh
AssureGeomPublished( self.mesh, edge )
class StdMeshersBuilder_Projection2D(Mesh_Algorithm):
"""
- Defines a projection 2D algorithm
+ Defines a projection 2D algorithm.
It is created by calling smeshBuilder.Mesh.Projection2D(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 2D algorithm for faces"
+ docHelper = "Create projection 2D algorithm for faces"
"""
doc string of the method
"""
class StdMeshersBuilder_Projection1D2D(StdMeshersBuilder_Projection2D):
"""
- Defines a projection 1D-2D algorithm
+ Defines a projection 1D-2D algorithm.
It is created by calling smeshBuilder.Mesh.Projection1D2D(geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 1D-2D algorithm for faces"
+ docHelper = "Create projection 1D-2D algorithm for faces"
"""
doc string of the method
"""
class StdMeshersBuilder_Projection3D(Mesh_Algorithm):
"""
- Defines a projection 3D algorithm
+ Defines a projection 3D algorithm.
It is created by calling smeshBuilder.Mesh.Projection3D(geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 3D algorithm for volumes"
+ docHelper = "Create projection 3D algorithm for volumes"
"""
doc string of the method
"""
srcV2: a vertex of *solid* to associate with *tgtV1* (optional)
tgtV2: a vertex of *the solid* to which the algorithm is assigned,to associate with *srcV2* (optional)
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Note:
association vertices must belong to one edge of a solid
class StdMeshersBuilder_Prism3D(Mesh_Algorithm):
"""
- Defines a Prism 3D algorithm, which is either "Extrusion 3D" or "Radial Prism" depending on geometry
+ Defines a Prism 3D algorithm, which is either "Extrusion 3D" or "Radial Prism" depending on geometry.
It is created by calling smeshBuilder.Mesh.Prism(geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates prism 3D algorithm for volumes"
+ docHelper = "Create prism 3D algorithm for volumes"
"""
doc string of the method
"""
3D hypothesis holding the 1D one
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
return self.distribHyp
the created hypothesis
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
if not self.nbLayers is None:
self.mesh.GetMesh().RemoveHypothesis( self.geom, self.nbLayers )
self.mesh.GetMesh().AddHypothesis( self.geom, self.distribHyp )
- study = self.mesh.smeshpyD.GetCurrentStudy() # prevents publishing own 1D hypothesis
- self.mesh.smeshpyD.SetCurrentStudy( None )
+ self.mesh.smeshpyD.SetEnablePublish( False ) # prevents publishing own 1D hypothesis
hyp = self.mesh.smeshpyD.CreateHypothesis(hypType, so)
- self.mesh.smeshpyD.SetCurrentStudy( study ) # enables publishing
+ self.mesh.smeshpyD.SetEnablePublish( True ) # enables publishing
if not self.distribHyp:
self.distribHyp = self.Hypothesis("LayerDistribution", UseExisting=0)
self.distribHyp.SetLayerDistribution( hyp )
Parameters:
n: number of layers
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
self.mesh.RemoveHypothesis( self.distribHyp, self.geom )
from salome.smesh.smeshBuilder import IsEqual
p: the precision of rounding
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
hyp = self.OwnHypothesis("LocalLength", [l,p])
hyp.SetLength(l)
s: the scale factor (optional)
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
if not s:
hyp = self.OwnHypothesis("NumberOfSegments", [n])
end: the length of the last segment
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
hyp = self.OwnHypothesis("Arithmetic1D", [start, end])
hyp.SetLength(start, 1)
ratio: the common ratio of the geometric progression
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
hyp = self.OwnHypothesis("GeometricProgression", [start, ratio])
hyp.SetStartLength( start )
end: for the length of the last segment
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
hyp = self.OwnHypothesis("StartEndLength", [start, end])
hyp.SetLength(start, 1)
fineness: defines the quality of the mesh within the range [0-1]
"""
if self.algoType != "RadialPrism_3D":
- print "Prism_3D algorithm doesn't support any hypothesis"
+ print("Prism_3D algorithm doesn't support any hypothesis")
return None
hyp = self.OwnHypothesis("AutomaticLength")
hyp.SetFineness( fineness )
class StdMeshersBuilder_RadialPrism3D(StdMeshersBuilder_Prism3D):
"""
- Defines Radial Prism 3D algorithm
- It is created by calling smeshBuilder.Mesh.Prism(geom=0)
+ Defines Radial Prism 3D algorithm.
+ It is created by calling smeshBuilder.Mesh.Prism(geom=0).
+ See :class:`StdMeshersBuilder_Prism3D` for methods defining distribution of mesh layers
+ build between the inner and outer shells.
"""
-
meshMethod = "Prism"
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates Raial Prism 3D algorithm for volumes"
+ docHelper = "Create Raial Prism 3D algorithm for volumes"
"""
doc string of the method
"""
self.distribHyp = self.Hypothesis("LayerDistribution2D", UseExisting=0)
else:
self.mesh.GetMesh().AddHypothesis( self.geom, self.distribHyp )
- study = self.mesh.smeshpyD.GetCurrentStudy() # prevents publishing own 1D hypothesis
- self.mesh.smeshpyD.SetCurrentStudy( None )
+ self.mesh.smeshpyD.SetEnablePublish( False )
hyp = self.mesh.smeshpyD.CreateHypothesis(hypType, so)
- self.mesh.smeshpyD.SetCurrentStudy( study ) # enables publishing
+ self.mesh.smeshpyD.SetEnablePublish( True )
self.distribHyp.SetLayerDistribution( hyp )
return hyp
Parameters:
n: number of layers
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
if self.distribHyp:
self.mesh.GetMesh().RemoveHypothesis( self.geom, self.distribHyp )
class StdMeshersBuilder_RadialQuadrangle1D2D(StdMeshersBuilder_RadialAlgorithm):
"""
- Defines a Radial Quadrangle 1D-2D algorithm
+ Defines a Radial Quadrangle 1D-2D algorithm.
It is created by calling smeshBuilder.Mesh.Quadrangle(smeshBuilder.RADIAL_QUAD,geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates quadrangle 1D-2D algorithm for faces having a shape of disk or a disk segment"
+ docHelper = "Create quadrangle 1D-2D algorithm for faces having a shape of disk or a disk segment"
"""
doc string of the method
"""
class StdMeshersBuilder_QuadMA_1D2D(StdMeshersBuilder_RadialAlgorithm):
"""
- Defines a Quadrangle (Medial Axis Projection) 1D-2D algorithm
+ Defines a Quadrangle (Medial Axis Projection) 1D-2D algorithm .
It is created by calling smeshBuilder.Mesh.Quadrangle(smeshBuilder.QUAD_MA_PROJ,geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates quadrangle 1D-2D algorithm for faces"
+ docHelper = "Create quadrangle 1D-2D algorithm for faces"
"""
doc string of the method
"""
pass
class StdMeshersBuilder_PolygonPerFace(Mesh_Algorithm):
- """ Defines a Polygon Per Face 2D algorithm
+ """ Defines a Polygon Per Face 2D algorithm.
It is created by calling smeshBuilder.Mesh.Polygon(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates polygon 2D algorithm for faces"
+ docHelper = "Create polygon 2D algorithm for faces"
+ """
+ doc string of the method
+ """
+
+ def __init__(self, mesh, geom=0):
+ """
+ Private constructor.
+
+ Parameters:
+ mesh: parent mesh object algorithm is assigned to
+ geom: geometry (shape/sub-shape) algorithm is assigned to;
+ if it is :code:`0` (default), the algorithm is assigned to the main shape
+ """
+ Mesh_Algorithm.__init__(self)
+ self.Create(mesh, geom, self.algoType)
+ pass
+
+ pass
+
+class StdMeshersBuilder_PolyhedronPerSolid(Mesh_Algorithm):
+ """ Defines a Polyhedron Per Solid 3D algorithm.
+ It is created by calling smeshBuilder.Mesh.Polyhedron(geom=0)
+ """
+
+ meshMethod = "Polyhedron"
+ """
+ name of the dynamic method in smeshBuilder.Mesh class
+ """
+ algoType = POLYHEDRON
+ """
+ type of algorithm used with helper function in smeshBuilder.Mesh class
+ """
+ isDefault = True
+ """
+ flag pointing whether this algorithm should be used by default in dynamic method
+ of smeshBuilder.Mesh class
+ """
+ docHelper = "Create polyhedron 3D algorithm for solids"
"""
doc string of the method
"""
pass
class StdMeshersBuilder_UseExistingElements_1D(Mesh_Algorithm):
- """ Defines a Use Existing Elements 1D algorithm
+ """ Defines a Use Existing Elements 1D algorithm.
It is created by calling smeshBuilder.Mesh.UseExisting1DElements(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates 1D algorithm for edges with reusing of existing mesh elements"
+ docHelper = "Create 1D algorithm for edges with reusing of existing mesh elements"
"""
doc string of the method
"""
toCopyMesh: if True, the whole mesh *groups* belong to is imported
toCopyGroups: if True, all groups of the mesh *groups* belong to are imported
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
for group in groups:
from salome.smesh.smeshBuilder import AssureGeomPublished
pass # end of StdMeshersBuilder_UseExistingElements_1D class
class StdMeshersBuilder_UseExistingElements_1D2D(Mesh_Algorithm):
- """ Defines a Use Existing Elements 1D-2D algorithm
+ """ Defines a Use Existing Elements 1D-2D algorithm.
It is created by calling smeshBuilder.Mesh.UseExisting2DElements(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates 1D-2D algorithm for faces with reusing of existing mesh elements"
+ docHelper = "Create 1D-2D algorithm for faces with reusing of existing mesh elements"
"""
doc string of the method
"""
toCopyMesh: if True, the whole mesh *groups* belong to is imported
toCopyGroups: if True, all groups of the mesh *groups* belong to are imported
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
import SMESH
compFun = lambda hyp, args: ( hyp.GetSourceFaces() == args[0] and \
pass # end of StdMeshersBuilder_UseExistingElements_1D2D class
class StdMeshersBuilder_Cartesian_3D(Mesh_Algorithm):
- """ Defines a Body Fitting 3D algorithm
+ """ Defines a Body Fitting 3D algorithm.
It is created by calling smeshBuilder.Mesh.BodyFitted(geom=0)
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates Body Fitting 3D algorithm for volumes"
+ docHelper = "Create Body Fitting 3D algorithm for volumes"
"""
doc string of the method
"""
- Functions f(t) defining grid spacing at each point on grid axis. If there are
several functions, they must be accompanied by relative coordinates of
points dividing the whole shape into ranges where the functions apply; points
- coodrinates should vary within (0.0, 1.0) range. Parameter *t* of the spacing
+ coordinates should vary within (0.0, 1.0) range. Parameter *t* of the spacing
function f(t) varies from 0.0 to 1.0 within a shape range.
+ Note:
+ The actual grid spacing can slightly differ from the defined one. This is done for the
+ best fitting of polyhedrons and for a better mesh quality on the interval boundaries.
+ For example, if a constant **Spacing** is defined along an axis, the actual grid will
+ fill the shape's dimension L along this axis with round number of equal cells:
+ Spacing_actual = L / round( L / Spacing_defined ).
Examples:
"10.5" - defines a grid with a constant spacing
self.mesh.AddHypothesis( self.hyp, self.geom )
for axis, gridDef in enumerate( [xGridDef, yGridDef, zGridDef] ):
- if not gridDef: raise ValueError, "Empty grid definition"
+ if not gridDef: raise ValueError("Empty grid definition")
if isinstance( gridDef, str ):
self.hyp.SetGridSpacing( [gridDef], [], axis )
elif isinstance( gridDef[0], str ):
class StdMeshersBuilder_UseExisting_1D(Mesh_Algorithm):
""" Defines a stub 1D algorithm, which enables "manual" creation of nodes and
- segments usable by 2D algorithms
+ segments usable by 2D algorithms.
It is created by calling smeshBuilder.Mesh.UseExistingSegments(geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates 1D algorithm allowing batch meshing of edges"
+ docHelper = "Create 1D algorithm allowing batch meshing of edges"
"""
doc string of the method
"""
class StdMeshersBuilder_UseExisting_2D(Mesh_Algorithm):
""" Defines a stub 2D algorithm, which enables "manual" creation of nodes and
- faces usable by 3D algorithms
+ faces usable by 3D algorithms.
It is created by calling smeshBuilder.Mesh.UseExistingFaces(geom=0)
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates 2D algorithm allowing batch meshing of faces"
+ docHelper = "Create 2D algorithm allowing batch meshing of faces"
"""
doc string of the method
"""