import salome
import geompy
+from math import sqrt
import StdMeshers
import NETGENPlugin
-geom = salome.lcc.FindOrLoadComponent("FactoryServer", "GEOM")
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
-
-geom.GetCurrentStudy(salome.myStudy._get_StudyId())
smesh.SetCurrentStudy(salome.myStudy)
smeshgui = salome.ImportComponentGUI("SMESH")
-smeshgui.Init(salome.myStudyId);
+smeshgui.Init(salome.myStudyId)
#---------------------------------------------------------------
# --
cc_radius = colis_radius + cc_width
-from math import sqrt
colis_center = sqrt(2.0)*colis_step/2
# --
# --
-barier = geompy.MakeCylinder(
- geom.MakePointStruct(0.,0.,0.),
- geom.MakeDirection(geom.MakePointStruct(0.,0.,1.)),
- barier_radius,
- barier_height)
+p0 = geompy.MakeVertex(0.,0.,0.)
+vz = geompy.MakeVectorDXDYDZ(0.,0.,1.)
# --
-colis = geompy.MakeCylinder(
- geom.MakePointStruct(0.,0.,0.),
- geom.MakeDirection(geom.MakePointStruct(0.,0.,1.)),
- colis_radius,
- barier_height)
+barier = geompy.MakeCylinder(p0, vz, barier_radius, barier_height)
-cc = geompy.MakeCylinder(
- geom.MakePointStruct(0.,0.,0.),
- geom.MakeDirection(geom.MakePointStruct(0.,0.,1.)),
- cc_radius,
- barier_height)
+# --
-colis_cc = geompy.MakeCompound(
- [colis._get_Name(), cc._get_Name()])
+colis = geompy.MakeCylinder(p0, vz, colis_radius, barier_height)
+cc = geompy.MakeCylinder(p0, vz, cc_radius, barier_height)
-colis_cc = geompy.MakeTranslation(
- colis_cc, colis_center, 0.0, 0.0)
+colis_cc = geompy.MakeCompound([colis, cc])
+colis_cc = geompy.MakeTranslation(colis_cc, colis_center, 0.0, 0.0)
-colis_cc_multi = geompy.MakeMultiRotation1D(
- colis_cc,
- geom.MakeDirection(geom.MakePointStruct(0.,0.,1.)),
- geom.MakePointStruct(0.,0.,0.),
- 4)
+colis_cc_multi = geompy.MultiRotate1D(colis_cc, vz, 4)
# --
-alveole = geompy.Partition(
- [colis_cc_multi._get_Name(), barier._get_Name()])
-
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeEdge = 6
+alveole = geompy.MakePartition([colis_cc_multi, barier])
print "Analysis of the geometry to mesh (right after the Partition) :"
-subShellList=geompy.SubShapeAll(alveole,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(alveole,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(alveole,ShapeTypeEdge)
+subShellList = geompy.SubShapeAll(alveole, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(alveole, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(alveole, geompy.ShapeType["EDGE"])
-print "number of Shells in alveole : ",len(subShellList)
-print "number of Faces in alveole : ",len(subFaceList)
-print "number of Edges in alveole : ",len(subEdgeList)
+print "number of Shells in alveole : ", len(subShellList)
+print "number of Faces in alveole : ", len(subFaceList)
+print "number of Edges in alveole : ", len(subEdgeList)
-subshapes = geompy.SubShapeAll( alveole, geompy.ShapeType["SHAPE"] )
+subshapes = geompy.SubShapeAll(alveole, geompy.ShapeType["SHAPE"])
## there are 9 subshapes
-comp1 = geompy.MakeCompound( [ subshapes[0]._get_Name(), subshapes[1]._get_Name() ] );
-comp2 = geompy.MakeCompound( [ subshapes[2]._get_Name(), subshapes[3]._get_Name() ] );
-comp3 = geompy.MakeCompound( [ subshapes[4]._get_Name(), subshapes[5]._get_Name() ] );
-comp4 = geompy.MakeCompound( [ subshapes[6]._get_Name(), subshapes[7]._get_Name() ] );
+comp1 = geompy.MakeCompound( [ subshapes[0], subshapes[1] ] )
+comp2 = geompy.MakeCompound( [ subshapes[2], subshapes[3] ] )
+comp3 = geompy.MakeCompound( [ subshapes[4], subshapes[5] ] )
+comp4 = geompy.MakeCompound( [ subshapes[6], subshapes[7] ] )
-compIORs = []
-compIORs.append( comp1._get_Name() );
-compIORs.append( comp2._get_Name() );
-compIORs.append( comp3._get_Name() );
-compIORs.append( comp4._get_Name() );
-comp = geompy.MakeCompound( compIORs );
+compGOs = []
+compGOs.append( comp1 )
+compGOs.append( comp2 )
+compGOs.append( comp3 )
+compGOs.append( comp4 )
+comp = geompy.MakeCompound( compGOs )
-alveole = geompy.MakeCompound( [ comp._get_Name(), subshapes[8]._get_Name() ]);
-
-idalveole= geompy.addToStudy(alveole, "alveole")
+alveole = geompy.MakeCompound( [ comp, subshapes[8] ])
+
+idalveole = geompy.addToStudy(alveole, "alveole")
print "Analysis of the geometry to mesh (right after the MakeCompound) :"
-subShellList=geompy.SubShapeAll(alveole,ShapeTypeShell)
-subFaceList=geompy.SubShapeAll(alveole,ShapeTypeFace)
-subEdgeList=geompy.SubShapeAll(alveole,ShapeTypeEdge)
+subShellList = geompy.SubShapeAll(alveole, geompy.ShapeType["SHELL"])
+subFaceList = geompy.SubShapeAll(alveole, geompy.ShapeType["FACE"])
+subEdgeList = geompy.SubShapeAll(alveole, geompy.ShapeType["EDGE"])
-print "number of Shells in alveole : ",len(subShellList)
-print "number of Faces in alveole : ",len(subFaceList)
-print "number of Edges in alveole : ",len(subEdgeList)
+print "number of Shells in alveole : ", len(subShellList)
+print "number of Faces in alveole : ", len(subFaceList)
+print "number of Edges in alveole : ", len(subEdgeList)
-status=geompy.CheckShape(alveole)
+status = geompy.CheckShape(alveole)
print " check status ", status
# ---- launch SMESH
-# ---- create Hypothesis
-
print "-------------------------- create Hypothesis (In this case global hypothesis are used)"
print "-------------------------- NumberOfSegments"
numberOfSegments = 10
-hypNbSeg=smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
+hypNbSeg = smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
hypNbSeg.SetNumberOfSegments(numberOfSegments)
print hypNbSeg.GetName()
print hypNbSeg.GetId()
maxElementArea = 0.1
-hypArea=smesh.CreateHypothesis("MaxElementArea", "libStdMeshersEngine.so")
+hypArea = smesh.CreateHypothesis("MaxElementArea", "libStdMeshersEngine.so")
hypArea.SetMaxElementArea(maxElementArea)
print hypArea.GetName()
print hypArea.GetId()
maxElementVolume = 0.5
-hypVolume=smesh.CreateHypothesis("MaxElementVolume", "libStdMeshersEngine.so")
+hypVolume = smesh.CreateHypothesis("MaxElementVolume", "libStdMeshersEngine.so")
hypVolume.SetMaxElementVolume(maxElementVolume)
print hypVolume.GetName()
print hypVolume.GetId()
smeshgui.SetName(salome.ObjectToID(hypVolume), "MaxElementVolume_0.5")
-# ---- create Algorithms
-
print "-------------------------- create Algorithms"
print "-------------------------- Regular_1D"
print "-------------------------- MEFISTO_2D"
-mefisto2D=smesh.CreateHypothesis("MEFISTO_2D", "libStdMeshersEngine.so")
+mefisto2D = smesh.CreateHypothesis("MEFISTO_2D", "libStdMeshersEngine.so")
smeshgui.SetName(salome.ObjectToID(mefisto2D), "MEFISTO_2D")
print "-------------------------- NETGEN_3D"
-netgen3D=smesh.CreateHypothesis("NETGEN_3D", "libNETGENEngine.so")
+netgen3D = smesh.CreateHypothesis("NETGEN_3D", "libNETGENEngine.so")
smeshgui.SetName(salome.ObjectToID(netgen3D), "NETGEN_3D")
# ---- init a Mesh with the alveole
shape_mesh = salome.IDToObject( idalveole )
-mesh=smesh.CreateMesh(shape_mesh)
+mesh = smesh.CreateMesh(shape_mesh)
smeshgui.SetName(salome.ObjectToID(mesh), "MeshAlveole")
# ---- add hypothesis to alveole
mesh.AddHypothesis(shape_mesh,hypVolume)
print "-------------------------- compute the mesh of alveole "
-ret=smesh.Compute(mesh,shape_mesh)
+ret = smesh.Compute(mesh,shape_mesh)
if ret != 0:
log=mesh.GetLog(0) # no erase trace
for linelog in log:
print linelog
print "Information about the Mesh_mechanic:"
- print "Number of nodes : ", mesh.NbNodes()
- print "Number of edges : ", mesh.NbEdges()
- print "Number of faces : ", mesh.NbFaces()
- print "Number of triangles : ", mesh.NbTriangles()
- print "Number of volumes: ", mesh.NbVolumes()
- print "Number of tetrahedrons: ", mesh.NbTetras()
+ print "Number of nodes : ", mesh.NbNodes()
+ print "Number of edges : ", mesh.NbEdges()
+ print "Number of faces : ", mesh.NbFaces()
+ print "Number of triangles : ", mesh.NbTriangles()
+ print "Number of volumes : ", mesh.NbVolumes()
+ print "Number of tetrahedrons: ", mesh.NbTetras()
else:
print "problem when computing the mesh"
-
+
salome.sg.updateObjBrowser(1)