-// SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses
+// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// File : SMESH_2D_Algo_i.hxx
-// Author : Paul RASCLE, EDF
-// Module : SMESH
-// $Header$
+// SMESH SMESH_I : idl implementation based on 'SMESH' unit's calsses
// File : SMESH_2smeshpy.cxx
// Created : Fri Nov 18 13:20:10 2005
// Author : Edward AGAPOV (eap)
-
+//
#include "SMESH_2smeshpy.hxx"
#include "utilities.h"
#include "SMESH_PythonDump.hxx"
-#include "Resource_DataMapOfAsciiStringAsciiString.hxx"
+#include "SMESH_NoteBook.hxx"
+#include "SMESH_Filter_i.hxx"
+
+#include <Resource_DataMapOfAsciiStringAsciiString.hxx>
#include "SMESH_Gen_i.hxx"
/* SALOME headers that include CORBA headers that include windows.h
IMPLEMENT_STANDARD_HANDLE (_pyCommand ,Standard_Transient);
IMPLEMENT_STANDARD_HANDLE (_pyGen ,_pyObject);
IMPLEMENT_STANDARD_HANDLE (_pyMesh ,_pyObject);
+IMPLEMENT_STANDARD_HANDLE (_pySubMesh ,_pyObject);
IMPLEMENT_STANDARD_HANDLE (_pyMeshEditor ,_pyObject);
IMPLEMENT_STANDARD_HANDLE (_pyHypothesis ,_pyObject);
+IMPLEMENT_STANDARD_HANDLE (_pySelfEraser ,_pyObject);
+IMPLEMENT_STANDARD_HANDLE (_pyGroup ,_pyObject);
+IMPLEMENT_STANDARD_HANDLE (_pyFilter ,_pyObject);
IMPLEMENT_STANDARD_HANDLE (_pyAlgorithm ,_pyHypothesis);
IMPLEMENT_STANDARD_HANDLE (_pyComplexParamHypo,_pyHypothesis);
IMPLEMENT_STANDARD_HANDLE (_pyNumberOfSegmentsHyp,_pyHypothesis);
IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
IMPLEMENT_STANDARD_RTTIEXT(_pyGen ,_pyObject);
IMPLEMENT_STANDARD_RTTIEXT(_pyMesh ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pySubMesh ,_pyObject);
IMPLEMENT_STANDARD_RTTIEXT(_pyMeshEditor ,_pyObject);
IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesis ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pySelfEraser ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyGroup ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyFilter ,_pyObject);
IMPLEMENT_STANDARD_RTTIEXT(_pyAlgorithm ,_pyHypothesis);
IMPLEMENT_STANDARD_RTTIEXT(_pyComplexParamHypo,_pyHypothesis);
IMPLEMENT_STANDARD_RTTIEXT(_pyNumberOfSegmentsHyp,_pyHypothesis);
TCollection_AsciiString
SMESH_2smeshpy::ConvertScript(const TCollection_AsciiString& theScript,
- Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod)
+ Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod,
+ Resource_DataMapOfAsciiStringAsciiString& theObjectNames)
{
- theGen = new _pyGen( theEntry2AccessorMethod );
+ theGen = new _pyGen( theEntry2AccessorMethod, theObjectNames );
// split theScript into separate commands
+
+ SMESH_NoteBook * aNoteBook = new SMESH_NoteBook();
+
int from = 1, end = theScript.Length(), to;
while ( from < end && ( to = theScript.Location( "\n", from, end )))
+ {
+ if ( to != from )
+ // cut out and store a command
+ aNoteBook->AddCommand( theScript.SubString( from, to - 1 ));
+ from = to + 1;
+ }
+
+ aNoteBook->ReplaceVariables();
+
+ TCollection_AsciiString aNoteScript = aNoteBook->GetResultScript();
+ delete aNoteBook;
+ aNoteBook = 0;
+
+ // split theScript into separate commands
+ from = 1, end = aNoteScript.Length();
+ while ( from < end && ( to = aNoteScript.Location( "\n", from, end )))
{
if ( to != from )
// cut out and store a command
- theGen->AddCommand( theScript.SubString( from, to - 1 ));
+ theGen->AddCommand( aNoteScript.SubString( from, to - 1 ));
from = to + 1;
}
+
// finish conversion
theGen->Flush();
#ifdef DUMP_CONVERSION
- cout << endl << " ######## RESULT ######## " << endl<< endl;
+ MESSAGE_BEGIN ( std::endl << " ######## RESULT ######## " << std::endl<< std::endl );
#endif
+
// reorder commands after conversion
list< Handle(_pyCommand) >::iterator cmd;
bool orderChanges;
for ( cmd = theGen->GetCommands().begin(); cmd != theGen->GetCommands().end(); ++cmd )
{
#ifdef DUMP_CONVERSION
- cout << "## COM " << (*cmd)->GetOrderNb() << ": "<< (*cmd)->GetString() << endl;
+ MESSAGE_ADD ( "## COM " << (*cmd)->GetOrderNb() << ": "<< (*cmd)->GetString() << std::endl );
#endif
if ( !(*cmd)->IsEmpty() ) {
aScript += "\n";
*/
//================================================================================
-_pyGen::_pyGen(Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod)
+_pyGen::_pyGen(Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod,
+ Resource_DataMapOfAsciiStringAsciiString& theObjectNames)
: _pyObject( new _pyCommand( TPythonDump::SMESHGenName(), 0 )),
- myID2AccessorMethod( theEntry2AccessorMethod )
+ myNbCommands( 0 ),
+ myID2AccessorMethod( theEntry2AccessorMethod ),
+ myObjectNames( theObjectNames ),
+ myNbFilters( 0 )
{
- myNbCommands = 0;
- myHasPattern = false;
// make that GetID() to return TPythonDump::SMESHGenName()
GetCreationCmd()->GetString() += "=";
}
Handle(_pyCommand) aCommand = myCommands.back();
#ifdef DUMP_CONVERSION
- cout << "## COM " << myNbCommands << ": "<< aCommand->GetString() << endl;
+ MESSAGE ( "## COM " << myNbCommands << ": "<< aCommand->GetString() );
#endif
_pyID objID = aCommand->GetObject();
if ( objID.IsEmpty() )
return aCommand;
+ // Find an object to process theCommand
+
// SMESH_Gen method?
- if ( objID == this->GetID() ) {
+ if ( objID == this->GetID() || objID == SMESH_2smeshpy::GenName()) {
this->Process( aCommand );
return aCommand;
}
+
// SMESH_Mesh method?
map< _pyID, Handle(_pyMesh) >::iterator id_mesh = myMeshes.find( objID );
- if ( id_mesh != myMeshes.end() ) {
+ if ( id_mesh != myMeshes.end() )
+ {
+ // check for mesh editor object
if ( aCommand->GetMethod() == "GetMeshEditor" ) { // MeshEditor creation
_pyID editorID = aCommand->GetResultValue();
Handle(_pyMeshEditor) editor = new _pyMeshEditor( aCommand );
myMeshEditors.insert( make_pair( editorID, editor ));
return aCommand;
+ }
+ // check for SubMesh objects
+ else if ( aCommand->GetMethod() == "GetSubMesh" ) { // SubMesh creation
+ _pyID subMeshID = aCommand->GetResultValue();
+ Handle(_pySubMesh) subMesh = new _pySubMesh( aCommand );
+ myObjects.insert( make_pair( subMeshID, subMesh ));
}
+
id_mesh->second->Process( aCommand );
return aCommand;
}
+
// SMESH_MeshEditor method?
map< _pyID, Handle(_pyMeshEditor) >::iterator id_editor = myMeshEditors.find( objID );
- if ( id_editor != myMeshEditors.end() ) {
+ if ( id_editor != myMeshEditors.end() )
+ {
id_editor->second->Process( aCommand );
+ TCollection_AsciiString processedCommand = aCommand->GetString();
+ // some commands of SMESH_MeshEditor create meshes
+ if ( aCommand->GetMethod().Search("MakeMesh") != -1 ) {
+ Handle(_pyMesh) mesh = new _pyMesh( aCommand, aCommand->GetResultValue() );
+ aCommand->GetString() = processedCommand; // discard changes made by _pyMesh
+ myMeshes.insert( make_pair( mesh->GetID(), mesh ));
+ }
+ if ( aCommand->GetMethod() == "MakeBoundaryMesh") {
+ _pyID meshID = aCommand->GetResultValue(0);
+ if ( !myMeshes.count( meshID ) )
+ {
+ Handle(_pyMesh) mesh = new _pyMesh( aCommand, meshID );
+ aCommand->GetString() = processedCommand; // discard changes made by _pyMesh
+ myMeshes.insert( make_pair( meshID, mesh ));
+ }
+ }
return aCommand;
}
// SMESH_Hypothesis method?
return aCommand;
}
+ // aFilterManager.CreateFilter() ?
+ if ( aCommand->GetMethod() == "CreateFilter" )
+ {
+ // Set a more human readable name to a filter
+ // aFilter0x7fbf6c71cfb0 -> aFilter_nb
+ _pyID newID, filterID = aCommand->GetResultValue();
+ int pos = filterID.Search( "0x" );
+ if ( pos > 1 )
+ newID = (filterID.SubString(1,pos-1) + "_") + _pyID( ++myNbFilters );
+
+ Handle(_pyObject) filter( new _pyFilter( aCommand, newID ));
+ AddObject( filter );
+ }
+
+ // other object method?
+ map< _pyID, Handle(_pyObject) >::iterator id_obj = myObjects.find( objID );
+ if ( id_obj != myObjects.end() ) {
+ id_obj->second->Process( aCommand );
+ return aCommand;
+ }
+
// Add access to a wrapped mesh
AddMeshAccessorMethod( aCommand );
// PAL12227. PythonDump was not updated at proper time; result is
// aCriteria.append(SMESH.Filter.Criterion(17,26,0,'L1',26,25,1e-07,SMESH.EDGE,-1))
// TypeError: __init__() takes exactly 11 arguments (10 given)
- char wrongCommand[] = "SMESH.Filter.Criterion(";
+ const char wrongCommand[] = "SMESH.Filter.Criterion(";
if ( int beg = theCommand.Location( wrongCommand, 1, theCommand.Length() ))
{
_pyCommand tmpCmd( theCommand.SubString( beg, theCommand.Length() ), -1);
aCommand->GetString().Trunc( beg - 1 );
aCommand->GetString() += tmpCmd.GetString();
}
+ // IMP issue 0021014
+ // set GetCriterion(elementType,CritType,Compare,Treshold,UnaryOp,BinaryOp,Tolerance)
+ // 1 2 3 4 5 6 7
+ // instead of "SMESH.Filter.Criterion(
+ // Type,Compare,Threshold,ThresholdStr,ThresholdID,UnaryOp,BinaryOp,Tolerance,TypeOfElement,Precision)
+ // 1 2 3 4 5 6 7 8 9 10
+ // in order to avoid the problem of type mismatch of long and FunctorType
+ const TCollection_AsciiString
+ SMESH("SMESH."), dfltFunctor = "SMESH.FT_Undefined", dftlTol = "1e-07", dftlPreci = "-1";
+ TCollection_AsciiString
+ Type = aCommand->GetArg(1), // long
+ Compare = aCommand->GetArg(2), // long
+ Threshold = aCommand->GetArg(3), // double
+ ThresholdStr = aCommand->GetArg(4), // string
+ ThresholdID = aCommand->GetArg(5), // string
+ UnaryOp = aCommand->GetArg(6), // long
+ BinaryOp = aCommand->GetArg(7), // long
+ Tolerance = aCommand->GetArg(8), // double
+ TypeOfElement = aCommand->GetArg(9), // ElementType
+ Precision = aCommand->GetArg(10); // long
+ Type = SMESH + SMESH::FunctorTypeToString( SMESH::FunctorType( Type.IntegerValue() ));
+ Compare = SMESH + SMESH::FunctorTypeToString( SMESH::FunctorType( Compare.IntegerValue() ));
+ UnaryOp = SMESH + SMESH::FunctorTypeToString( SMESH::FunctorType( UnaryOp.IntegerValue() ));
+ BinaryOp = SMESH + SMESH::FunctorTypeToString( SMESH::FunctorType( BinaryOp.IntegerValue() ));
+
+ aCommand->RemoveArgs();
+ aCommand->SetObject( SMESH_2smeshpy::GenName() );
+ aCommand->SetMethod( "GetCriterion" );
+
+ aCommand->SetArg( 1, TypeOfElement );
+ aCommand->SetArg( 2, Type );
+ aCommand->SetArg( 3, Compare );
+
+ if ( Type == "SMESH.FT_ElemGeomType" && Threshold.IsIntegerValue() )
+ {
+ // set SMESH.GeometryType instead of a numerical Threshold
+ const char* types[SMESH::Geom_POLYHEDRA+1] = {
+ "Geom_POINT", "Geom_EDGE", "Geom_TRIANGLE", "Geom_QUADRANGLE", "Geom_POLYGON",
+ "Geom_TETRA", "Geom_PYRAMID", "Geom_HEXA", "Geom_PENTA", "Geom_POLYHEDRA"
+ };
+ int iGeom = Threshold.IntegerValue();
+ if ( -1 < iGeom && iGeom < SMESH::Geom_POLYHEDRA+1 )
+ Threshold = SMESH + types[ iGeom ];
+ }
+ if ( ThresholdStr.Length() != 2 ) // not '' or ""
+ aCommand->SetArg( 4, ThresholdStr );
+ else if ( ThresholdID.Length() != 2 )
+ aCommand->SetArg( 4, ThresholdID );
+ else
+ aCommand->SetArg( 4, Threshold );
+ // find the last not default arg
+ int lastDefault = 8;
+ if ( Tolerance == dftlTol ) {
+ lastDefault = 7;
+ if ( BinaryOp == dfltFunctor ) {
+ lastDefault = 6;
+ if ( UnaryOp == dfltFunctor )
+ lastDefault = 5;
+ }
+ }
+ if ( 5 < lastDefault ) aCommand->SetArg( 5, UnaryOp );
+ if ( 6 < lastDefault ) aCommand->SetArg( 6, BinaryOp );
+ if ( 7 < lastDefault ) aCommand->SetArg( 7, Tolerance );
+ if ( Precision != dftlPreci )
+ {
+ TCollection_AsciiString crit = aCommand->GetResultValue();
+ aCommand->GetString() += "; ";
+ aCommand->GetString() += crit + ".Precision = " + Precision;
+ }
}
return aCommand;
}
//================================================================================
/*!
- * \brief Convert the command or remember it for later conversion
+ * \brief Convert the command or remember it for later conversion
* \param theCommand - The python command calling a method of SMESH_Gen
*/
//================================================================================
// Concatenate( [mesh1, ...], ... )
// CreateHypothesis( theHypType, theLibName )
// Compute( mesh, geom )
+ // Evaluate( mesh, geom )
// mesh creation
- if ( theCommand->GetMethod() == "CreateMesh" ||
- theCommand->GetMethod() == "CreateEmptyMesh" ||
- theCommand->GetMethod() == "CreateMeshesFromUNV" ||
- theCommand->GetMethod() == "CreateMeshesFromSTL")
+ TCollection_AsciiString method = theCommand->GetMethod();
+
+ if ( method == "CreateMesh" || method == "CreateEmptyMesh")
{
Handle(_pyMesh) mesh = new _pyMesh( theCommand );
myMeshes.insert( make_pair( mesh->GetID(), mesh ));
return;
}
-
- if(theCommand->GetMethod() == "CreateMeshesFromMED")
+ if ( method == "CreateMeshesFromUNV" ||
+ method == "CreateMeshesFromSTL" ||
+ method == "CreateMeshesFromCGNS" ||
+ method == "CopyMesh" )
+ {
+ Handle(_pyMesh) mesh = new _pyMesh( theCommand, theCommand->GetResultValue() );
+ myMeshes.insert( make_pair( mesh->GetID(), mesh ));
+ return;
+ }
+ if( method == "CreateMeshesFromMED" || method == "CreateMeshesFromSAUV")
{
for(int ind = 0;ind<theCommand->GetNbResultValues();ind++)
{
Handle(_pyMesh) mesh = new _pyMesh( theCommand, theCommand->GetResultValue(ind));
- myMeshes.insert( make_pair( theCommand->GetResultValue(ind), mesh ));
+ myMeshes.insert( make_pair( theCommand->GetResultValue(ind), mesh ));
}
}
// CreateHypothesis()
- if ( theCommand->GetMethod() == "CreateHypothesis" )
+ if ( method == "CreateHypothesis" )
{
+ // issue 199929, remove standard library name (default parameter)
+ const TCollection_AsciiString & aLibName = theCommand->GetArg( 2 );
+ if ( aLibName.Search( "StdMeshersEngine" ) != -1 ) {
+ // keep first argument
+ TCollection_AsciiString arg = theCommand->GetArg( 1 );
+ theCommand->RemoveArgs();
+ theCommand->SetArg( 1, arg );
+ }
+
myHypos.push_back( _pyHypothesis::NewHypothesis( theCommand ));
return;
}
// smeshgen.Compute( mesh, geom ) --> mesh.Compute()
- if ( theCommand->GetMethod() == "Compute" )
+ if ( method == "Compute" )
{
const _pyID& meshID = theCommand->GetArg( 1 );
map< _pyID, Handle(_pyMesh) >::iterator id_mesh = myMeshes.find( meshID );
}
}
- // leave only one smeshgen.GetPattern() in the script
- if ( theCommand->GetMethod() == "GetPattern" ) {
- if ( myHasPattern ) {
- theCommand->Clear();
+ // smeshgen.Evaluate( mesh, geom ) --> mesh.Evaluate(geom)
+ if ( method == "Evaluate" )
+ {
+ const _pyID& meshID = theCommand->GetArg( 1 );
+ map< _pyID, Handle(_pyMesh) >::iterator id_mesh = myMeshes.find( meshID );
+ if ( id_mesh != myMeshes.end() ) {
+ theCommand->SetObject( meshID );
+ _pyID geom = theCommand->GetArg( 2 );
+ theCommand->RemoveArgs();
+ theCommand->SetArg( 1, geom );
return;
}
- myHasPattern = true;
+ }
+
+ // objects erasing creation command if no more it's commands invoked:
+ // SMESH_Pattern, FilterManager
+ if ( method == "GetPattern" ||
+ method == "CreateFilterManager" ||
+ method == "CreateMeasurements" ) {
+ Handle(_pyObject) obj = new _pySelfEraser( theCommand );
+ if ( !myObjects.insert( make_pair( obj->GetID(), obj )).second )
+ theCommand->Clear(); // already created
}
// Concatenate( [mesh1, ...], ... )
- if ( theCommand->GetMethod() == "Concatenate" ||
- theCommand->GetMethod() == "ConcatenateWithGroups")
+ if ( method == "Concatenate" || method == "ConcatenateWithGroups")
{
+ if ( method == "ConcatenateWithGroups" ) {
+ theCommand->SetMethod( "Concatenate" );
+ theCommand->SetArg( theCommand->GetNbArgs() + 1, "True" );
+ }
+ Handle(_pyMesh) mesh = new _pyMesh( theCommand, theCommand->GetResultValue() );
+ myMeshes.insert( make_pair( mesh->GetID(), mesh ));
AddMeshAccessorMethod( theCommand );
}
void _pyGen::Flush()
{
+ // create empty command
+ myLastCommand = new _pyCommand();
+
map< _pyID, Handle(_pyMesh) >::iterator id_mesh = myMeshes.begin();
for ( ; id_mesh != myMeshes.end(); ++id_mesh )
if ( ! id_mesh->second.IsNull() )
if ( !(*hyp)->IsWrapped() )
(*hyp)->GetCreationCmd()->SetObject( SMESH_2smeshpy::GenName() );
}
+
+ map< _pyID, Handle(_pyObject) >::iterator id_obj = myObjects.begin();
+ for ( ; id_obj != myObjects.end(); ++id_obj )
+ if ( ! id_obj->second.IsNull() )
+ id_obj->second->Flush();
+
+ myLastCommand->SetOrderNb( ++myNbCommands );
+ myCommands.push_back( myLastCommand );
}
//================================================================================
return 0;
}
+//================================================================================
+/*!
+ * \brief Find subMesh by ID (entry)
+ * \param theSubMeshID - The subMesh ID
+ * \retval Handle(_pySubMesh) - The found subMesh
+ */
+//================================================================================
+
+Handle(_pySubMesh) _pyGen::FindSubMesh( const _pyID& theSubMeshID )
+{
+ map< _pyID, Handle(_pyObject) >::iterator id_subMesh = myObjects.find(theSubMeshID);
+ if ( id_subMesh != myObjects.end() )
+ return Handle(_pySubMesh)::DownCast( id_subMesh->second );
+ return Handle(_pySubMesh)();
+}
+
+
//================================================================================
/*!
* \brief Change order of commands in the script
void _pyGen::SetCommandAfter( Handle(_pyCommand) theCmd, Handle(_pyCommand) theAfterCmd )
{
-#ifdef _DEBUG_
-//cout << "SET\t" << theAfterCmd->GetString() << endl << "BEFORE\t" << theCmd->GetString() << endl<<endl;
-#endif
+ setNeighbourCommand( theCmd, theAfterCmd, true );
+}
+
+//================================================================================
+/*!
+ * \brief Set one command before the other
+ * \param theCmd - Command to move
+ * \param theBeforeCmd - Command before which to insert the first one
+ */
+//================================================================================
+
+void _pyGen::SetCommandBefore( Handle(_pyCommand) theCmd, Handle(_pyCommand) theBeforeCmd )
+{
+ setNeighbourCommand( theCmd, theBeforeCmd, false );
+}
+
+//================================================================================
+/*!
+ * \brief Set one command before or after the other
+ * \param theCmd - Command to move
+ * \param theOtherCmd - Command ater or before which to insert the first one
+ */
+//================================================================================
+
+void _pyGen::setNeighbourCommand( Handle(_pyCommand)& theCmd,
+ Handle(_pyCommand)& theOtherCmd,
+ const bool theIsAfter )
+{
list< Handle(_pyCommand) >::iterator pos;
pos = find( myCommands.begin(), myCommands.end(), theCmd );
myCommands.erase( pos );
- pos = find( myCommands.begin(), myCommands.end(), theAfterCmd );
- myCommands.insert( ++pos, theCmd );
+ pos = find( myCommands.begin(), myCommands.end(), theOtherCmd );
+ myCommands.insert( (theIsAfter ? ++pos : pos), theCmd );
int i = 1;
for ( pos = myCommands.begin(); pos != myCommands.end(); ++pos)
(*pos)->SetOrderNb( i++ );
}
+//================================================================================
+/*!
+ * \brief Set command be last in list of commands
+ * \param theCmd - Command to be last
+ */
+//================================================================================
+
+Handle(_pyCommand)& _pyGen::GetLastCommand()
+{
+ return myLastCommand;
+}
+
//================================================================================
/*!
* \brief Set method to access to object wrapped with python class
//================================================================================
/*!
- * \brief Find out type of geom group
- * \param grpID - The geom group entry
- * \retval int - The type
+ * \brief Generated new ID for object and assign with existing name
+ * \param theID - ID of existing object
*/
//================================================================================
-static bool sameGroupType( const _pyID& grpID,
- const TCollection_AsciiString& theType)
-{
- // define group type as smesh.Mesh.Group() does
- int type = -1;
- SALOMEDS::Study_var study = SMESH_Gen_i::GetSMESHGen()->GetCurrentStudy();
- SALOMEDS::SObject_var aSObj = study->FindObjectID( grpID.ToCString() );
- if ( !aSObj->_is_nil() ) {
- GEOM::GEOM_Object_var aGeomObj = GEOM::GEOM_Object::_narrow( aSObj->GetObject() );
- if ( !aGeomObj->_is_nil() ) {
- switch ( aGeomObj->GetShapeType() ) {
- case GEOM::VERTEX: type = SMESH::NODE; break;
- case GEOM::EDGE: type = SMESH::EDGE; break;
- case GEOM::FACE: type = SMESH::FACE; break;
- case GEOM::SOLID:
- case GEOM::SHELL: type = SMESH::VOLUME; break;
- case GEOM::COMPOUND: {
- GEOM::GEOM_Gen_ptr aGeomGen = SMESH_Gen_i::GetSMESHGen()->GetGeomEngine();
- if ( !aGeomGen->_is_nil() ) {
- GEOM::GEOM_IGroupOperations_var aGrpOp =
- aGeomGen->GetIGroupOperations( study->StudyId() );
- if ( !aGrpOp->_is_nil() ) {
- switch ( aGrpOp->GetType( aGeomObj )) {
- case TopAbs_VERTEX: type = SMESH::NODE; break;
- case TopAbs_EDGE: type = SMESH::EDGE; break;
- case TopAbs_FACE: type = SMESH::FACE; break;
- case TopAbs_SOLID: type = SMESH::VOLUME; break;
- default:;
- }
- }
- }
- }
- default:;
- }
- }
- }
- if ( type < 0 ) {
- MESSAGE("Type of the group " << grpID << " not found");
- return false;
+_pyID _pyGen::GenerateNewID( const _pyID& theID )
+{
+ int index = 1;
+ _pyID aNewID;
+ do {
+ aNewID = theID + _pyID( ":" ) + _pyID( index++ );
}
- if ( theType.IsIntegerValue() )
- return type == theType.IntegerValue();
+ while ( myObjectNames.IsBound( aNewID ) );
- switch ( type ) {
- case SMESH::NODE: return theType.Location( "NODE", 1, theType.Length() );
- case SMESH::EDGE: return theType.Location( "EDGE", 1, theType.Length() );
- case SMESH::FACE: return theType.Location( "FACE", 1, theType.Length() );
- case SMESH::VOLUME: return theType.Location( "VOLUME", 1, theType.Length() );
- default:;
- }
- return false;
+ myObjectNames.Bind( aNewID, myObjectNames.IsBound( theID )
+ ? (myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ))
+ : _pyID( "A" ) + aNewID );
+ return aNewID;
}
//================================================================================
/*!
- * \brief
- * \param theCreationCmd -
+ * \brief Stores theObj in myObjects
*/
//================================================================================
-_pyMesh::_pyMesh(const Handle(_pyCommand) theCreationCmd):
- _pyObject(theCreationCmd), myHasEditor(false)
+void _pyGen::AddObject( Handle(_pyObject)& theObj )
+{
+ myObjects.insert( make_pair( theObj->GetID(), theObj ));
+}
+
+//================================================================================
+/*!
+ * \brief Finds a _pyObject by ID
+ */
+//================================================================================
+
+Handle(_pyObject) _pyGen::FindObject( const _pyID& theObjID ) const
+{
+ std::map< _pyID, Handle(_pyObject) >::const_iterator id_obj = myObjects.find( theObjID );
+ return ( id_obj == myObjects.end() ) ? Handle(_pyObject)() : id_obj->second;
+}
+
+//================================================================================
+/*!
+ * \brief Find out type of geom group
+ * \param grpID - The geom group entry
+ * \retval int - The type
+ */
+//================================================================================
+
+// static bool sameGroupType( const _pyID& grpID,
+// const TCollection_AsciiString& theType)
+// {
+// // define group type as smesh.Mesh.Group() does
+// int type = -1;
+// SALOMEDS::Study_var study = SMESH_Gen_i::GetSMESHGen()->GetCurrentStudy();
+// SALOMEDS::SObject_var aSObj = study->FindObjectID( grpID.ToCString() );
+// if ( !aSObj->_is_nil() ) {
+// GEOM::GEOM_Object_var aGeomObj = GEOM::GEOM_Object::_narrow( aSObj->GetObject() );
+// if ( !aGeomObj->_is_nil() ) {
+// switch ( aGeomObj->GetShapeType() ) {
+// case GEOM::VERTEX: type = SMESH::NODE; break;
+// case GEOM::EDGE: type = SMESH::EDGE; break;
+// case GEOM::FACE: type = SMESH::FACE; break;
+// case GEOM::SOLID:
+// case GEOM::SHELL: type = SMESH::VOLUME; break;
+// case GEOM::COMPOUND: {
+// GEOM::GEOM_Gen_ptr aGeomGen = SMESH_Gen_i::GetSMESHGen()->GetGeomEngine();
+// if ( !aGeomGen->_is_nil() ) {
+// GEOM::GEOM_IGroupOperations_var aGrpOp =
+// aGeomGen->GetIGroupOperations( study->StudyId() );
+// if ( !aGrpOp->_is_nil() ) {
+// switch ( aGrpOp->GetType( aGeomObj )) {
+// case TopAbs_VERTEX: type = SMESH::NODE; break;
+// case TopAbs_EDGE: type = SMESH::EDGE; break;
+// case TopAbs_FACE: type = SMESH::FACE; break;
+// case TopAbs_SOLID: type = SMESH::VOLUME; break;
+// default:;
+// }
+// }
+// }
+// }
+// default:;
+// }
+// }
+// }
+// if ( type < 0 ) {
+// MESSAGE("Type of the group " << grpID << " not found");
+// return false;
+// }
+// if ( theType.IsIntegerValue() )
+// return type == theType.IntegerValue();
+
+// switch ( type ) {
+// case SMESH::NODE: return theType.Location( "NODE", 1, theType.Length() );
+// case SMESH::EDGE: return theType.Location( "EDGE", 1, theType.Length() );
+// case SMESH::FACE: return theType.Location( "FACE", 1, theType.Length() );
+// case SMESH::VOLUME: return theType.Location( "VOLUME", 1, theType.Length() );
+// default:;
+// }
+// return false;
+// }
+
+//================================================================================
+/*!
+ * \brief
+ * \param theCreationCmd -
+ */
+//================================================================================
+
+_pyMesh::_pyMesh(const Handle(_pyCommand) theCreationCmd)
+ : _pyObject(theCreationCmd), myHasEditor(false)
{
// convert my creation command
Handle(_pyCommand) creationCmd = GetCreationCmd();
- TCollection_AsciiString str = creationCmd->GetMethod();
-
- creationCmd->SetObject( SMESH_2smeshpy::SmeshpyName() );
- if(str != "CreateMeshesFromUNV" &&
- str != "CreateMeshesFromMED" &&
- str != "CreateMeshesFromSTL")
- creationCmd->SetMethod( "Mesh" );
+ //TCollection_AsciiString str = creationCmd->GetMethod();
+// if(str != "CreateMeshesFromUNV" &&
+// str != "CreateMeshesFromMED" &&
+// str != "CreateMeshesFromSTL")
+ creationCmd->SetObject( SMESH_2smeshpy::SmeshpyName() );
+ creationCmd->SetMethod( "Mesh" );
theGen->SetAccessorMethod( GetID(), "GetMesh()" );
}
//================================================================================
/*!
- * \brief
- * \param theCreationCmd -
+ * \brief
+ * \param theCreationCmd -
*/
//================================================================================
_pyMesh::_pyMesh(const Handle(_pyCommand) theCreationCmd, const TCollection_AsciiString& id):
{
// convert my creation command
Handle(_pyCommand) creationCmd = GetCreationCmd();
- creationCmd->SetObject( SMESH_2smeshpy::SmeshpyName() );
+ creationCmd->SetObject( SMESH_2smeshpy::SmeshpyName() );
theGen->SetAccessorMethod( id, "GetMesh()" );
}
//================================================================================
/*!
- * \brief Convert a IDL API command of SMESH::Mesh to a method call of python Mesh
+ * \brief Convert an IDL API command of SMESH::SMESH_Mesh to a method call of python Mesh
* \param theCommand - Engine method called for this mesh
*/
//================================================================================
const TCollection_AsciiString method = theCommand->GetMethod();
// ----------------------------------------------------------------------
- if ( method == "GetSubMesh" ) {
- mySubmeshes.push_back( theCommand );
+ if ( method == "GetSubMesh" ) { // collect submeshes of the mesh
+ Handle(_pySubMesh) subMesh = theGen->FindSubMesh( theCommand->GetResultValue() );
+ if ( !subMesh.IsNull() ) {
+ subMesh->SetCreator( this );
+ mySubmeshes.push_back( subMesh );
+ }
}
// ----------------------------------------------------------------------
else if ( method == "AddHypothesis" ) { // mesh.AddHypothesis(geom, HYPO )
// ----------------------------------------------------------------------
else if ( method == "CreateGroupFromGEOM" ) {// (type, name, grp)
_pyID grp = theCommand->GetArg( 3 );
- if ( sameGroupType( grp, theCommand->GetArg( 1 )) ) { // --> Group(grp)
- theCommand->SetMethod( "Group" );
+ // VSR 24/12/2010. PAL21106: always use GroupOnGeom() function on dump
+ // next if(){...} section is commented
+ //if ( sameGroupType( grp, theCommand->GetArg( 1 )) ) { // --> Group(grp)
+ // theCommand->SetMethod( "Group" );
+ // theCommand->RemoveArgs();
+ // theCommand->SetArg( 1, grp );
+ //}
+ //else {
+ // ------------------------->>>>> GroupOnGeom( grp, name, typ )
+ _pyID type = theCommand->GetArg( 1 );
+ _pyID name = theCommand->GetArg( 2 );
+ theCommand->SetMethod( "GroupOnGeom" );
theCommand->RemoveArgs();
theCommand->SetArg( 1, grp );
- }
- else {
- AddMeshAccess( theCommand );
- }
+ theCommand->SetArg( 2, name );
+ theCommand->SetArg( 3, type );
+ //}
}
// ----------------------------------------------------------------------
- else if ( method == "ExportToMED" ) { // ExportToMED() --> ExportMED()
- theCommand->SetMethod( "ExportMED" );
+ else if ( method == "CreateGroupFromFilter" ) // --> GroupOnFilter()
+ {
+ theCommand->SetMethod( "GroupOnFilter" );
+ Handle(_pyGroup) group = new _pyGroup( theCommand );
+ theGen->AddObject( group );
+
+ // GroupOnFilter(typ, name, aFilter0x4743dc0 -> aFilter_1)
+ _pyID filterID = theCommand->GetArg(3);
+ Handle(_pyObject) filter = theGen->FindObject( filterID );
+ if ( !filter.IsNull() && filter->IsKind(STANDARD_TYPE(_pyFilter)))
+ filter->Process( theCommand );
+ }
+ // ----------------------------------------------------------------------
+ else if ( method == "GetIdsFromFilter" )
+ {
+ // GetIdsFromFilter( aFilter0x4743dc0) -> GetIdsFromFilter( aFilter_1)
+ _pyID filterID = theCommand->GetArg(1);
+ Handle(_pyObject) filter = theGen->FindObject( filterID );
+ if ( !filter.IsNull() && filter->IsKind(STANDARD_TYPE(_pyFilter)))
+ filter->Process( theCommand );
}
// ----------------------------------------------------------------------
- else if ( method == "CreateGroup" ) { // CreateGroup() --> CreateEmptyGroup()
+ else if ( method == "CreateGroup" ) // CreateGroup() --> CreateEmptyGroup()
+ {
theCommand->SetMethod( "CreateEmptyGroup" );
+ Handle(_pyGroup) group = new _pyGroup( theCommand );
+ theGen->AddObject( group );
+ }
+ // ----------------------------------------------------------------------
+ else if ( method == "ExportToMED" || // ExportToMED() --> ExportMED()
+ method == "ExportToMEDX" ) { // ExportToMEDX() --> ExportMED()
+ theCommand->SetMethod( "ExportMED" );
+ }
+ // ----------------------------------------------------------------------
+ else if ( method == "ExportCGNS" )
+ { // ExportCGNS(part, ...) -> ExportCGNS(..., part)
+ _pyID partID = theCommand->GetArg( 1 );
+ int nbArgs = theCommand->GetNbArgs();
+ for ( int i = 2; i <= nbArgs; ++i )
+ theCommand->SetArg( i-1, theCommand->GetArg( i ));
+ theCommand->SetArg( nbArgs, partID );
+ }
+ // ----------------------------------------------------------------------
+ else if ( method.Location( "ExportPartTo", 1, method.Length() ) == 1 )
+ { // ExportPartTo*(part, ...) -> Export*(..., part)
+ //
+ // remove "PartTo" from the method
+ TCollection_AsciiString newMethod = method;
+ newMethod.Remove( 7, 6 );
+ theCommand->SetMethod( newMethod );
+ // make the 1st arg be the last one
+ _pyID partID = theCommand->GetArg( 1 );
+ int nbArgs = theCommand->GetNbArgs();
+ for ( int i = 2; i <= nbArgs; ++i )
+ theCommand->SetArg( i-1, theCommand->GetArg( i ));
+ theCommand->SetArg( nbArgs, partID );
}
// ----------------------------------------------------------------------
else if ( method == "RemoveHypothesis" ) // (geom, hyp)
// remove hyp from myHypos
myHypos.remove( hyp );
}
+ // check for SubMesh order commands
+ else if ( theCommand->GetMethod() == "GetMeshOrder" ||
+ theCommand->GetMethod() == "SetMeshOrder" )
+ {
+ // make commands GetSubMesh() returning sub-meshes be before using sub-meshes
+ // by GetMeshOrder() and SetMeshOrder(), since by defalut GetSubMesh()
+ // commands are moved at the end of the script
+ const bool isArg = theCommand->GetMethod() == "SetMeshOrder";
+ const TCollection_AsciiString& cmdStr = theCommand->GetString();
+ int begPos = (/*isArg ? cmdStr.Search( "(" ) :*/ cmdStr.Search( "[" )) + 1;
+ int endPos = (isArg ? cmdStr.Search( ")" ) : cmdStr.Search( "=" )) - 1;
+ if ( begPos != -1 && begPos < endPos && endPos <= cmdStr.Length() ) {
+ TCollection_AsciiString aSubStr = cmdStr.SubString( begPos, endPos );
+ Standard_Integer index = 1;
+ TCollection_AsciiString anIDStr = aSubStr.Token("\t ,[]", index++);
+ while ( !anIDStr.IsEmpty() ) {
+ Handle(_pySubMesh) subMesh = theGen->FindSubMesh( anIDStr );
+ if ( !subMesh.IsNull() )
+ subMesh->Process( theCommand ); // it moves GetSubMesh() before theCommand
+ anIDStr = aSubStr.Token("\t ,[]", index++);
+ }
+ }
+ }
// add accessor method if necessary
else
{
bool _pyMesh::NeedMeshAccess( const Handle(_pyCommand)& theCommand )
{
- // names of SMESH_Mesh methods fully equal to methods of class Mesh, so
- // no conversion is needed for them at all:
+ // names of SMESH_Mesh methods fully equal to methods of python class Mesh,
+ // so no conversion is needed for them at all:
static TStringSet sameMethods;
if ( sameMethods.empty() ) {
const char * names[] =
- { "ExportDAT","ExportUNV","ExportSTL", "RemoveGroup","RemoveGroupWithContents",
+ { "ExportDAT","ExportUNV","ExportSTL","ExportSAUV", "RemoveGroup","RemoveGroupWithContents",
"GetGroups","UnionGroups","IntersectGroups","CutGroups","GetLog","GetId","ClearLog",
"GetStudyId","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
"NbEdges","NbEdgesOfOrder","NbFaces","NbFacesOfOrder","NbTriangles",
"GetNodeInverseElements","GetShapeID","GetShapeIDForElem","GetElemNbNodes",
"GetElemNode","IsMediumNode","IsMediumNodeOfAnyElem","ElemNbEdges","ElemNbFaces",
"IsPoly","IsQuadratic","BaryCenter","GetHypothesisList", "SetAutoColor", "GetAutoColor",
- "" }; // <- mark of end
+ "Clear", "ConvertToStandalone", "GetMeshOrder", "SetMeshOrder"
+ ,"" }; // <- mark of end
sameMethods.Insert( names );
}
void _pyMesh::Flush()
{
- list < Handle(_pyCommand) >::iterator cmd, cmd2;
+ list < Handle(_pyCommand) >::iterator cmd;
// try to convert algo addition like this:
// mesh.AddHypothesis(geom, ALGO ) --> ALGO = mesh.Algo()
for ( cmd = myAddHypCmds.begin(); cmd != myAddHypCmds.end(); ++cmd )
{
Handle(_pyCommand) addCmd = *cmd;
+
_pyID algoID = addCmd->GetArg( 2 );
Handle(_pyHypothesis) algo = theGen->FindHyp( algoID );
if ( algo.IsNull() || !algo->IsAlgo() )
continue;
- // try to convert
+
+ // check and create new algorithm instance if it is already wrapped
+ if ( algo->IsWrapped() ) {
+ _pyID localAlgoID = theGen->GenerateNewID( algoID );
+ TCollection_AsciiString aNewCmdStr = localAlgoID +
+ TCollection_AsciiString( " = " ) + theGen->GetID() +
+ TCollection_AsciiString( ".CreateHypothesis( \"" ) + algo->GetAlgoType() +
+ TCollection_AsciiString( "\" )" );
+
+ Handle(_pyCommand) newCmd = theGen->AddCommand( aNewCmdStr );
+ Handle(_pyAlgorithm) newAlgo = Handle(_pyAlgorithm)::DownCast(theGen->FindHyp( localAlgoID ));
+ if ( !newAlgo.IsNull() ) {
+ newAlgo->Assign( algo, this->GetID() );
+ newAlgo->SetCreationCmd( newCmd );
+ algo = newAlgo;
+ // set algorithm creation
+ theGen->SetCommandBefore( newCmd, addCmd );
+ }
+ else
+ newCmd->Clear();
+ }
_pyID geom = addCmd->GetArg( 1 );
bool isLocalAlgo = ( geom != GetGeom() );
+
+ // try to convert
if ( algo->Addition2Creation( addCmd, this->GetID() )) // OK
{
// wrapped algo is created atfer mesh creation
addCmd->SetArg( addCmd->GetNbArgs() + 1,
TCollection_AsciiString( "geom=" ) + geom );
// sm = mesh.GetSubMesh(geom, name) --> sm = ALGO.GetSubMesh()
- for ( cmd2 = mySubmeshes.begin(); cmd2 != mySubmeshes.end(); ++cmd2 ) {
- Handle(_pyCommand) subCmd = *cmd2;
+ list < Handle(_pySubMesh) >::iterator smIt;
+ for ( smIt = mySubmeshes.begin(); smIt != mySubmeshes.end(); ++smIt ) {
+ Handle(_pySubMesh) subMesh = *smIt;
+ Handle(_pyCommand) subCmd = subMesh->GetCreationCmd();
if ( geom == subCmd->GetArg( 1 )) {
subCmd->SetObject( algo->GetID() );
subCmd->RemoveArgs();
- addCmd->AddDependantCmd( subCmd );
+ subMesh->SetCreator( algo );
}
}
}
void _pyMeshEditor::Process( const Handle(_pyCommand)& theCommand)
{
- // names of SMESH_MeshEditor methods fully equal to methods of class Mesh, so
+ // names of SMESH_MeshEditor methods fully equal to methods of python class Mesh, so
// commands calling this methods are converted to calls of methods of Mesh
static TStringSet sameMethods;
if ( sameMethods.empty() ) {
const char * names[] = {
- "RemoveElements","RemoveNodes","AddNode","AddEdge","AddFace","AddPolygonalFace",
- "AddVolume","AddPolyhedralVolume","AddPolyhedralVolumeByFaces","MoveNode",
- "InverseDiag","DeleteDiag","Reorient","ReorientObject","SplitQuad","SplitQuadObject",
+ "RemoveElements","RemoveNodes","RemoveOrphanNodes","AddNode","Add0DElement","AddEdge","AddFace","AddPolygonalFace",
+ "AddVolume","AddPolyhedralVolume","AddPolyhedralVolumeByFaces","MoveNode", "MoveClosestNodeToPoint",
+ "InverseDiag","DeleteDiag","Reorient","ReorientObject","TriToQuad","SplitQuad","SplitQuadObject",
"BestSplit","Smooth","SmoothObject","SmoothParametric","SmoothParametricObject",
"ConvertToQuadratic","ConvertFromQuadratic","RenumberNodes","RenumberElements",
- "RotationSweep","RotationSweepObject","ExtrusionSweep","AdvancedExtrusion",
- "ExtrusionSweepObject","ExtrusionSweepObject1D","ExtrusionSweepObject2D","Mirror",
- "MirrorObject","Translate","TranslateObject","Rotate","RotateObject",
- "FindCoincidentNodes","FindCoincidentNodesOnPart","MergeNodes","FindEqualElements",
+ "RotationSweep","RotationSweepObject","RotationSweepObject1D","RotationSweepObject2D",
+ "ExtrusionSweep","AdvancedExtrusion","ExtrusionSweepObject","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
+ "ExtrusionAlongPath","ExtrusionAlongPathObject","ExtrusionAlongPathX",
+ "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject2D",
+ "Mirror","MirrorObject","Translate","TranslateObject","Rotate","RotateObject",
+ "FindCoincidentNodes",/*"FindCoincidentNodesOnPart",*/"MergeNodes","FindEqualElements",
"MergeElements","MergeEqualElements","SewFreeBorders","SewConformFreeBorders",
"SewBorderToSide","SewSideElements","ChangeElemNodes","GetLastCreatedNodes",
"GetLastCreatedElems",
"MirrorMakeMesh","MirrorObjectMakeMesh","TranslateMakeMesh",
- "TranslateObjectMakeMesh","RotateMakeMesh","RotateObjectMakeMesh",
- "" }; // <- mark of the end
+ "TranslateObjectMakeMesh","RotateMakeMesh","RotateObjectMakeMesh","MakeBoundaryMesh",
+ "MakeBoundaryElements"
+ ,"" }; // <- mark of the end
sameMethods.Insert( names );
}
- //theGen->AddMeshAccessorMethod( theCommand ); // for *Object()
- if ( sameMethods.Contains( theCommand->GetMethod() )) {
- theCommand->SetObject( myMesh );
+ // names of SMESH_MeshEditor methods which differ from methods of class Mesh
+ // only by last two arguments
+ static TStringSet diffLastTwoArgsMethods;
+ if (diffLastTwoArgsMethods.empty() ) {
+ const char * names[] = {
+ "MirrorMakeGroups","MirrorObjectMakeGroups",
+ "TranslateMakeGroups","TranslateObjectMakeGroups",
+ "RotateMakeGroups","RotateObjectMakeGroups",
+ ""};// <- mark of the end
+ diffLastTwoArgsMethods.Insert( names );
+ }
- // meshes made by *MakeMesh() methods are not wrapped by _pyMesh,
- // so let _pyMesh care of it (TMP?)
- if ( theCommand->GetMethod().Search("MakeMesh") != -1 )
- _pyMesh( new _pyCommand( theCommand->GetString(), 0 )); // for theGen->SetAccessorMethod()
+ const TCollection_AsciiString & method = theCommand->GetMethod();
+ bool isPyMeshMethod = sameMethods.Contains( method );
+ if ( !isPyMeshMethod )
+ {
+ //Replace SMESH_MeshEditor "MakeGroups" functions by the Mesh
+ //functions with the flag "theMakeGroups = True" like:
+ //SMESH_MeshEditor.CmdMakeGroups => Mesh.Cmd(...,True)
+ int pos = method.Search("MakeGroups");
+ if( pos != -1)
+ {
+ isPyMeshMethod = true;
+
+ // 1. Remove "MakeGroups" from the Command
+ TCollection_AsciiString aMethod = theCommand->GetMethod();
+ int nbArgsToAdd = diffLastTwoArgsMethods.Contains(aMethod) ? 2 : 1;
+ aMethod.Trunc(pos-1);
+ theCommand->SetMethod(aMethod);
+
+ // 2. And add last "True" argument(s)
+ while(nbArgsToAdd--)
+ theCommand->SetArg(theCommand->GetNbArgs()+1,"True");
+ }
}
- else {
+
+ // set "ExtrusionAlongPathX()" instead of "ExtrusionAlongPathObjX()"
+ if ( !isPyMeshMethod && method == "ExtrusionAlongPathObjX")
+ {
+ isPyMeshMethod=true;
+ theCommand->SetMethod("ExtrusionAlongPathX");
+ }
+
+ // set "FindCoincidentNodesOnPart()" instead of "FindCoincidentNodesOnPartBut()"
+ if ( !isPyMeshMethod && method == "FindCoincidentNodesOnPartBut")
+ {
+ isPyMeshMethod=true;
+ theCommand->SetMethod("FindCoincidentNodesOnPart");
+ }
+ // DoubleNodeElemGroupNew() -> DoubleNodeElemGroup()
+ // DoubleNodeGroupNew() -> DoubleNodeGroup()
+ // DoubleNodeGroupsNew() -> DoubleNodeGroups()
+ // DoubleNodeElemGroupsNew() -> DoubleNodeElemGroups()
+ if ( !isPyMeshMethod && ( method == "DoubleNodeElemGroupNew" ||
+ method == "DoubleNodeElemGroupsNew" ||
+ method == "DoubleNodeGroupNew" ||
+ method == "DoubleNodeGroupsNew"))
+ {
+ isPyMeshMethod=true;
+ theCommand->SetMethod( method.SubString( 1, method.Length()-3));
+ theCommand->SetArg(theCommand->GetNbArgs()+1,"True");
+ }
+ // ConvertToQuadraticObject(bool,obj) -> ConvertToQuadratic(bool,obj)
+ // ConvertFromQuadraticObject(obj) -> ConvertFromQuadratic(obj)
+ if ( !isPyMeshMethod && ( method == "ConvertToQuadraticObject" ||
+ method == "ConvertFromQuadraticObject" ))
+ {
+ isPyMeshMethod=true;
+ theCommand->SetMethod( method.SubString( 1, method.Length()-6));
+ // prevent moving creation of the converted sub-mesh to the end of the script
+ bool isFromQua = ( method.Value( 8 ) == 'F' );
+ Handle(_pySubMesh) sm = theGen->FindSubMesh( theCommand->GetArg( isFromQua ? 1 : 2 ));
+ if ( !sm.IsNull() )
+ sm->Process( theCommand );
+ }
+ // FindAmongElementsByPoint(meshPart, x, y, z, elementType) ->
+ // FindElementsByPoint(x, y, z, elementType, meshPart)
+ if ( !isPyMeshMethod && method == "FindAmongElementsByPoint" )
+ {
+ isPyMeshMethod=true;
+ theCommand->SetMethod( "FindElementsByPoint" );
+ // make the 1st arg be the last one
+ _pyID partID = theCommand->GetArg( 1 );
+ int nbArgs = theCommand->GetNbArgs();
+ for ( int i = 2; i <= nbArgs; ++i )
+ theCommand->SetArg( i-1, theCommand->GetArg( i ));
+ theCommand->SetArg( nbArgs, partID );
+ }
+
+ // meshes made by *MakeMesh() methods are not wrapped by _pyMesh,
+ // so let _pyMesh care of it (TMP?)
+ // if ( theCommand->GetMethod().Search("MakeMesh") != -1 )
+ // _pyMesh( new _pyCommand( theCommand->GetString(), 0 )); // for theGen->SetAccessorMethod()
+ if ( isPyMeshMethod )
+ {
+ theCommand->SetObject( myMesh );
+ }
+ else
+ {
// editor creation command is needed only if any editor function is called
+ theGen->AddMeshAccessorMethod( theCommand ); // for *Object()
if ( !myCreationCmdStr.IsEmpty() ) {
GetCreationCmd()->GetString() = myCreationCmdStr;
myCreationCmdStr.Clear();
//================================================================================
/*!
* \brief _pyHypothesis constructor
- * \param theCreationCmd -
+ * \param theCreationCmd -
*/
//================================================================================
// i.e. convertion result will be "locallength = regular1d.LocalLength(<arg of SetLength()>)"
hyp->AddArgMethod( "SetLength" );
}
+ else if ( hypType == "MaxLength" ) {
+ // set algo's method creating hyp, and algo type
+ hyp->SetConvMethodAndType( "MaxSize", "Regular_1D");
+ // set method whose 1 arg will become the 1-st arg of hyp creation command
+ // i.e. convertion result will be "maxsize = regular1d.MaxSize(<arg of SetLength()>)"
+ hyp->AddArgMethod( "SetLength" );
+ }
else if ( hypType == "NumberOfSegments" ) {
hyp = new _pyNumberOfSegmentsHyp( theCreationCmd );
hyp->SetConvMethodAndType( "NumberOfSegments", "Regular_1D");
hyp->AddArgMethod( "SetNumberOfSegments" );
// arg of SetScaleFactor() will become the 2-nd arg of hyp creation command
hyp->AddArgMethod( "SetScaleFactor" );
+ hyp->AddArgMethod( "SetReversedEdges" );
}
else if ( hypType == "Arithmetic1D" ) {
hyp = new _pyComplexParamHypo( theCreationCmd );
hyp->SetConvMethodAndType( "Arithmetic1D", "Regular_1D");
+ hyp->AddArgMethod( "SetStartLength" );
+ hyp->AddArgMethod( "SetEndLength" );
+ hyp->AddArgMethod( "SetReversedEdges" );
}
else if ( hypType == "StartEndLength" ) {
hyp = new _pyComplexParamHypo( theCreationCmd );
hyp->SetConvMethodAndType( "StartEndLength", "Regular_1D");
+ hyp->AddArgMethod( "SetStartLength" );
+ hyp->AddArgMethod( "SetEndLength" );
+ hyp->AddArgMethod( "SetReversedEdges" );
}
else if ( hypType == "Deflection1D" ) {
hyp->SetConvMethodAndType( "Deflection1D", "Regular_1D");
}
else if ( hypType == "QuadranglePreference" ) {
hyp->SetConvMethodAndType( "QuadranglePreference", "Quadrangle_2D");
- hyp->SetConvMethodAndType( "QuadranglePreference", "NETGEN_2D_ONLY");
+ hyp->SetConvMethodAndType( "SetQuadAllowed", "NETGEN_2D_ONLY");
+ }
+ else if ( hypType == "TrianglePreference" ) {
+ hyp->SetConvMethodAndType( "TrianglePreference", "Quadrangle_2D");
+ }
+ // RadialQuadrangle_1D2D ----------
+ else if ( hypType == "RadialQuadrangle_1D2D" ) {
+ algo->SetConvMethodAndType( "Quadrangle" , hypType.ToCString());
+ algo->myArgs.Append( "algo=smesh.RADIAL_QUAD" );
+ }
+ else if ( hypType == "NumberOfLayers2D" ) {
+ hyp->SetConvMethodAndType( "NumberOfLayers", "RadialQuadrangle_1D2D");
+ hyp->AddArgMethod( "SetNumberOfLayers" );
+ }
+ else if ( hypType == "LayerDistribution2D" ) {
+ hyp = new _pyLayerDistributionHypo( theCreationCmd, "Get2DHypothesis" );
+ hyp->SetConvMethodAndType( "LayerDistribution", "RadialQuadrangle_1D2D");
+ }
+ // BLSURF ----------
+ else if ( hypType == "BLSURF" ) {
+ algo->SetConvMethodAndType( "Triangle", hypType.ToCString());
+ algo->myArgs.Append( "algo=smesh.BLSURF" );
+ }
+ else if ( hypType == "BLSURF_Parameters") {
+ hyp->SetConvMethodAndType( "Parameters", "BLSURF");
}
// NETGEN ----------
-// else if ( hypType == "NETGEN_2D") { // 1D-2D
-// algo->SetConvMethodAndType( "Triangle" , hypType.ToCString());
-// algo->myArgs.Append( "algo=smesh.NETGEN" );
-// }
+ else if ( hypType == "NETGEN_2D") { // 1D-2D
+ algo->SetConvMethodAndType( "Triangle" , hypType.ToCString());
+ algo->myArgs.Append( "algo=smesh.NETGEN" );
+ }
+ else if ( hypType == "NETGEN_Parameters_2D") {
+ hyp->SetConvMethodAndType( "Parameters", "NETGEN_2D");
+ }
+ else if ( hypType == "NETGEN_SimpleParameters_2D") {
+ hyp->SetConvMethodAndType( "Parameters", "NETGEN_2D");
+ hyp->myArgs.Append( "which=smesh.SIMPLE" );
+ }
+ else if ( hypType == "NETGEN_2D3D") { // 1D-2D-3D
+ algo->SetConvMethodAndType( "Tetrahedron" , hypType.ToCString());
+ algo->myArgs.Append( "algo=smesh.FULL_NETGEN" );
+ }
+ else if ( hypType == "NETGEN_Parameters") {
+ hyp->SetConvMethodAndType( "Parameters", "NETGEN_2D3D");
+ }
+ else if ( hypType == "NETGEN_SimpleParameters_3D") {
+ hyp->SetConvMethodAndType( "Parameters", "NETGEN_2D3D");
+ hyp->myArgs.Append( "which=smesh.SIMPLE" );
+ }
else if ( hypType == "NETGEN_2D_ONLY") { // 2D
algo->SetConvMethodAndType( "Triangle" , hypType.ToCString());
algo->myArgs.Append( "algo=smesh.NETGEN_2D" );
algo->SetConvMethodAndType( "Tetrahedron", hypType.ToCString());
algo->myArgs.Append( "algo=smesh.GHS3D" );
}
+ else if ( hypType == "GHS3D_Parameters") {
+ hyp->SetConvMethodAndType( "Parameters", "GHS3D_3D");
+ }
// Hexa_3D ---------
- else if ( hypType == "Hexa_3D" ) {
+ else if ( hypType == "BLSURF" ) {
algo->SetConvMethodAndType( "Hexahedron", hypType.ToCString());
}
// Repetitive Projection_1D ---------
else if ( hypType == "Projection_2D" ) {
algo->SetConvMethodAndType( "Projection2D", hypType.ToCString());
}
+ else if ( hypType == "Projection_1D2D" ) {
+ algo->SetConvMethodAndType( "Projection1D2D", hypType.ToCString());
+ }
else if ( hypType == "ProjectionSource2D" ) {
hyp->SetConvMethodAndType( "SourceFace", "Projection_2D");
hyp->AddArgMethod( "SetSourceFace");
hyp->AddArgMethod( "SetNumberOfLayers" );
}
else if ( hypType == "LayerDistribution" ) {
- hyp = new _pyLayerDistributionHypo( theCreationCmd );
+ hyp = new _pyLayerDistributionHypo( theCreationCmd, "Get3DHypothesis" );
hyp->SetConvMethodAndType( "LayerDistribution", "RadialPrism_3D");
}
-
- if ( algo->IsValid() ) {
- return algo;
+ // Cartesian 3D ---------
+ else if ( hypType == "Cartesian_3D" ) {
+ algo->SetConvMethodAndType( "BodyFitted", hypType.ToCString());
+ }
+ else if ( hypType == "CartesianParameters3D" ) {
+ hyp = new _pyComplexParamHypo( theCreationCmd );
+ hyp->SetConvMethodAndType( "SetGrid", "Cartesian_3D");
+ for ( int iArg = 0; iArg < 4; ++iArg )
+ hyp->myArgs.Append("[]");
}
- return hyp;
+
+ return algo->IsValid() ? algo : hyp;
}
//================================================================================
algo = theGen->FindAlgo( myGeom, theMesh, this );
if ( algo.IsNull() )
return false;
+ // attach hypothesis creation command to be after algo creation command
+ // because it can be new created instance of algorithm
algo->GetCreationCmd()->AddDependantCmd( theCmd );
}
myIsWrapped = true;
}
// set a new creation command
GetCreationCmd()->Clear();
+ // replace creation command by wrapped instance
+ // please note, that hypothesis attaches to algo creation command (see upper)
SetCreationCmd( theCmd );
+
// clear commands setting arg values
list < Handle(_pyCommand) >::iterator argCmd = myArgCommands.begin();
for ( ; argCmd != myArgCommands.end(); ++argCmd )
( *cmd )->Clear();
}
+
+//================================================================================
+/*!
+ * \brief Assign fields of theOther to me except myIsWrapped
+ */
+//================================================================================
+
+void _pyHypothesis::Assign( const Handle(_pyHypothesis)& theOther,
+ const _pyID& theMesh )
+{
+ myIsWrapped = false;
+ myMesh = theMesh;
+
+ // myCreationCmd = theOther->myCreationCmd;
+ myIsAlgo = theOther->myIsAlgo;
+ myGeom = theOther->myGeom;
+ myType2CreationMethod = theOther->myType2CreationMethod;
+ myArgs = theOther->myArgs;
+ myArgMethods = theOther->myArgMethods;
+ myNbArgsByMethod = theOther->myNbArgsByMethod;
+ myArgCommands = theOther->myArgCommands;
+ myUnknownCommands = theOther->myUnknownCommands;
+}
+
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
void _pyComplexParamHypo::Process( const Handle(_pyCommand)& theCommand)
{
- // ex: hyp.SetLength(start, 1)
- // hyp.SetLength(end, 0)
- ASSERT(( theCommand->GetMethod() == "SetLength" ));
- ASSERT(( theCommand->GetArg( 2 ).IsIntegerValue() ));
- int i = 2 - theCommand->GetArg( 2 ).IntegerValue();
- while ( myArgs.Length() < i )
- myArgs.Append( "[]" );
- myArgs( i ) = theCommand->GetArg( 1 ); // arg value
- myArgCommands.push_back( theCommand );
+ if ( GetAlgoType() == "Cartesian_3D" )
+ {
+ // CartesianParameters3D hyp
+
+ if ( theCommand->GetMethod() == "SetSizeThreshold" )
+ {
+ myArgs( 4 ) = theCommand->GetArg( 1 );
+ myArgCommands.push_back( theCommand );
+ return;
+ }
+ if ( theCommand->GetMethod() == "SetGrid" ||
+ theCommand->GetMethod() == "SetGridSpacing" )
+ {
+ TCollection_AsciiString axis = theCommand->GetArg( theCommand->GetNbArgs() );
+ int iArg = 1 + ( axis.Value(1) - '0' );
+ if ( theCommand->GetMethod() == "SetGrid" )
+ {
+ myArgs( iArg ) = theCommand->GetArg( 1 );
+ }
+ else
+ {
+ myArgs( iArg ) = "[ ";
+ myArgs( iArg ) += theCommand->GetArg( 1 );
+ myArgs( iArg ) += ", ";
+ myArgs( iArg ) += theCommand->GetArg( 2 );
+ myArgs( iArg ) += "]";
+ }
+ myArgCommands.push_back( theCommand );
+ return;
+ }
+ }
+
+ if( theCommand->GetMethod() == "SetLength" )
+ {
+ // NOW it becomes OBSOLETE
+ // ex: hyp.SetLength(start, 1)
+ // hyp.SetLength(end, 0)
+ ASSERT(( theCommand->GetArg( 2 ).IsIntegerValue() ));
+ int i = 2 - theCommand->GetArg( 2 ).IntegerValue();
+ while ( myArgs.Length() < i )
+ myArgs.Append( "[]" );
+ myArgs( i ) = theCommand->GetArg( 1 ); // arg value
+ myArgCommands.push_back( theCommand );
+ }
+ else
+ {
+ _pyHypothesis::Process( theCommand );
+ }
+}
+//================================================================================
+/*!
+ * \brief Clear SetObjectEntry() as it is called by methods of Mesh_Segment
+ */
+//================================================================================
+
+void _pyComplexParamHypo::Flush()
+{
+ if ( IsWrapped() )
+ {
+ list < Handle(_pyCommand) >::iterator cmd = myUnknownCommands.begin();
+ for ( ; cmd != myUnknownCommands.end(); ++cmd )
+ if ((*cmd)->GetMethod() == "SetObjectEntry" )
+ (*cmd)->Clear();
+ }
}
//================================================================================
my1dHyp->ClearAllCommands();
}
my1dHyp = hyp1d;
- if ( my1dHyp.IsNull() )
- return; // something wrong :(
-
- // make a new name for 1D hyp = "HypType" + "_Distribution"
- if ( my1dHyp->GetCreationCmd()->GetMethod() == "CreateHypothesis" ) {
- // not yet converted creation cmd
- TCollection_AsciiString hypTypeQuoted = my1dHyp->GetCreationCmd()->GetArg(1);
- TCollection_AsciiString hypType = hypTypeQuoted.SubString( 2, hypTypeQuoted.Length() - 1 );
- newName = hypType + "_Distribution";
- my1dHyp->GetCreationCmd()->SetResultValue( newName );
- }
- else {
- // already converted creation cmd
- newName = my1dHyp->GetCreationCmd()->GetResultValue();
- }
- // as creation of 1D hyp was written later then it's edition,
- // we need to find all it's edition calls and process them
- list< Handle(_pyCommand) >& cmds = theGen->GetCommands();
- list< Handle(_pyCommand) >::iterator cmdIt = cmds.begin();
- for ( ; cmdIt != cmds.end(); ++cmdIt ) {
- const _pyID& objID = (*cmdIt)->GetObject();
- if ( objID == hyp1dID ) {
- my1dHyp->Process( *cmdIt );
- my1dHyp->GetCreationCmd()->AddDependantCmd( *cmdIt );
- ( *cmdIt )->SetObject( newName );
- }
- }
if ( !myArgCommands.empty() )
myArgCommands.front()->Clear();
- theCommand->SetArg( 1, newName );
myArgCommands.push_back( theCommand );
- // copy hyp1d's creation method and args
-// myCreationMethod = hyp1d->GetCreationMethod();
-// myArgs = hyp1d->GetArgs();
-// // make them cleared at conversion
-// myArgCommands = hyp1d->GetArgCommands();
-
-// // to be cleared at convertion only
-// myArgCommands.push_back( theCommand );
}
//================================================================================
/*!
- * \brief
- * \param theAdditionCmd -
- * \param theMesh -
- * \retval bool -
+ * \brief
+ * \param theAdditionCmd - command to be converted
+ * \param theMesh - mesh instance
+ * \retval bool - status
*/
//================================================================================
_pyID geom = theAdditionCmd->GetArg( 1 );
- my1dHyp->SetMesh( theMesh );
- if ( !my1dHyp->Addition2Creation( theAdditionCmd, theMesh ))
- return false;
+ Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMesh, this );
+ if ( !algo.IsNull() )
+ {
+ my1dHyp->SetMesh( theMesh );
+ my1dHyp->SetConvMethodAndType(my1dHyp->GetAlgoCreationMethod().ToCString(),
+ algo->GetAlgoType().ToCString());
+ if ( !my1dHyp->Addition2Creation( theAdditionCmd, theMesh ))
+ return false;
- // clear "SetLayerDistribution()" cmd
- myArgCommands.front()->Clear();
+ // clear "SetLayerDistribution()" cmd
+ myArgCommands.back()->Clear();
- // Convert my creation => me = RadialPrismAlgo.Get3DHypothesis()
+ // Convert my creation => me = RadialPrismAlgo.Get3DHypothesis()
- // find RadialPrism algo created on <geom> for theMesh
- Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMesh, this );
- if ( !algo.IsNull() ) {
+ // find RadialPrism algo created on <geom> for theMesh
GetCreationCmd()->SetObject( algo->GetID() );
- GetCreationCmd()->SetMethod( "Get3DHypothesis" );
+ GetCreationCmd()->SetMethod( myAlgoMethod );
GetCreationCmd()->RemoveArgs();
theAdditionCmd->AddDependantCmd( GetCreationCmd() );
myIsWrapped = true;
//================================================================================
/*!
- * \brief
+ * \brief
*/
//================================================================================
void _pyLayerDistributionHypo::Flush()
{
- //my1dHyp.Nullify();
- //_pyHypothesis::Flush();
+ // as creation of 1D hyp was written later then it's edition,
+ // we need to find all it's edition calls and process them
+ if ( !my1dHyp.IsNull() )
+ {
+ _pyID hyp1dID = my1dHyp->GetCreationCmd()->GetResultValue();
+
+ // make a new name for 1D hyp = "HypType" + "_Distribution"
+ _pyID newName;
+ if ( my1dHyp->IsWrapped() ) {
+ newName = my1dHyp->GetCreationCmd()->GetMethod();
+ }
+ else {
+ TCollection_AsciiString hypTypeQuoted = my1dHyp->GetCreationCmd()->GetArg(1);
+ newName = hypTypeQuoted.SubString( 2, hypTypeQuoted.Length() - 1 );
+ }
+ newName += "_Distribution";
+ my1dHyp->GetCreationCmd()->SetResultValue( newName );
+
+ list< Handle(_pyCommand) >& cmds = theGen->GetCommands();
+ list< Handle(_pyCommand) >::iterator cmdIt = cmds.begin();
+ for ( ; cmdIt != cmds.end(); ++cmdIt ) {
+ const _pyID& objID = (*cmdIt)->GetObject();
+ if ( objID == hyp1dID ) {
+ my1dHyp->Process( *cmdIt );
+ my1dHyp->GetCreationCmd()->AddDependantCmd( *cmdIt );
+ ( *cmdIt )->SetObject( newName );
+ }
+ }
+ // Set new hyp name to SetLayerDistribution() cmd
+ if ( !myArgCommands.empty() && !myArgCommands.back()->IsEmpty() )
+ myArgCommands.back()->SetArg( 1, newName );
+ }
}
//================================================================================
for ( ; !distrTypeNb && cmd != myUnknownCommands.rend(); ++cmd )
if ( (*cmd)->GetMethod() == "SetDistrType" )
distrTypeNb = (*cmd)->GetOrderNb();
+ else if (IsWrapped() && (*cmd)->GetMethod() == "SetObjectEntry" )
+ (*cmd)->Clear();
// clear commands before the last SetDistrType()
list<Handle(_pyCommand)> * cmds[2] = { &myArgCommands, &myUnknownCommands };
* \retval bool - false if the command cant be converted
*/
//================================================================================
-
+
bool _pySegmentLengthAroundVertexHyp::Addition2Creation( const Handle(_pyCommand)& theCmd,
const _pyID& theMeshID)
{
/*!
* \brief Convert the command adding an algorithm to mesh
* \param theCmd - The command like mesh.AddHypothesis( geom, algo )
- * \param theMesh - The mesh needing this algo
+ * \param theMesh - The mesh needing this algo
* \retval bool - false if the command cant be converted
*/
//================================================================================
-
+
bool _pyAlgorithm::Addition2Creation( const Handle(_pyCommand)& theCmd,
const _pyID& theMeshID)
{
{
// beginning
int begPos = GetBegPos( RESULT_IND ) + myRes.Length();
- if ( begPos < 1 )
+ if ( begPos < 1 ) {
begPos = myString.Location( "=", 1, Length() ) + 1;
- // store
+ // is '=' in the string argument (for example, name) or not
+ int nb1 = 0; // number of ' character at the left of =
+ int nb2 = 0; // number of " character at the left of =
+ for ( int i = 1; i < begPos-1; i++ ) {
+ if ( myString.Value( i )=='\'' )
+ nb1 += 1;
+ else if ( myString.Value( i )=='"' )
+ nb2 += 1;
+ }
+ // if number of ' or " is not divisible by 2,
+ // then get an object at the start of the command
+ if ( nb1 % 2 != 0 || nb2 % 2 != 0 )
+ begPos = 1;
+ }
myObj = GetWord( myString, begPos, true );
+ // check if object is complex,
+ // so far consider case like "smesh.smesh.Method()"
+ if ( int bracketPos = myString.Location( "(", begPos, Length() )) {
+ //if ( bracketPos==0 ) bracketPos = Length();
+ int dotPos = begPos+myObj.Length();
+ while ( dotPos+1 < bracketPos ) {
+ if ( int pos = myString.Location( ".", dotPos+1, bracketPos ))
+ dotPos = pos;
+ else
+ break;
+ }
+ if ( dotPos > begPos+myObj.Length() )
+ myObj = myString.SubString( begPos, dotPos-1 );
+ }
+ // store
SetBegPos( OBJECT_IND, begPos );
}
//SCRUTE(myObj);
{
if ( GetBegPos( ARG1_IND ) == UNKNOWN )
{
- // find all args
- int begPos = GetBegPos( METHOD_IND ) + myMeth.Length();
- if ( begPos < 1 )
- begPos = myString.Location( "(", 1, Length() ) + 1;
-
- int i = 0, prevLen = 0;
- while ( begPos != EMPTY ) {
- begPos += prevLen;
- // check if we are looking at the closing parenthesis
- while ( begPos <= Length() && isspace( myString.Value( begPos )))
- ++begPos;
- if ( begPos > Length() || myString.Value( begPos ) == ')' )
- break;
- myArgs.Append( GetWord( myString, begPos, true, true ));
- SetBegPos( ARG1_IND + i, begPos );
- prevLen = myArgs.Last().Length();
- if ( prevLen == 0 )
- myArgs.Remove( myArgs.Length() ); // no more args
- i++;
+ // Find all args
+
+ int pos = GetBegPos( METHOD_IND ) + myMeth.Length();
+ if ( pos < 1 )
+ pos = myString.Location( "(", 1, Length() );
+ else
+ --pos;
+
+ // we are at or before '(', skip it if present
+ if ( pos > 0 ) {
+ while ( pos <= Length() && myString.Value( pos ) != '(' ) ++pos;
+ if ( myString.Value( pos ) != '(' )
+ pos = 0;
+ }
+ if ( pos < 1 ) {
+ SetBegPos( ARG1_IND, 0 ); // even no '('
+ return theEmptyString;
+ }
+ ++pos;
+
+ list< TCollection_AsciiString > separatorStack( 1, ",)");
+ bool ignoreNesting = false;
+ int prevPos = pos;
+ while ( pos <= Length() )
+ {
+ const char chr = myString.Value( pos );
+
+ if ( separatorStack.back().Location( chr, 1, separatorStack.back().Length()))
+ {
+ if ( separatorStack.size() == 1 ) // ',' dividing args or a terminal ')' found
+ {
+ while ( pos-1 >= prevPos && isspace( myString.Value( prevPos )))
+ ++prevPos;
+ if ( pos-1 >= prevPos ) {
+ TCollection_AsciiString arg = myString.SubString( prevPos, pos-1 );
+ arg.RightAdjust(); // remove spaces
+ arg.LeftAdjust();
+ SetBegPos( ARG1_IND + myArgs.Length(), prevPos );
+ myArgs.Append( arg );
+ }
+ if ( chr == ')' )
+ break;
+ prevPos = pos+1;
+ }
+ else // end of nesting args found
+ {
+ separatorStack.pop_back();
+ ignoreNesting = false;
+ }
+ }
+ else if ( !ignoreNesting )
+ {
+ switch ( chr ) {
+ case '(' : separatorStack.push_back(")"); break;
+ case '[' : separatorStack.push_back("]"); break;
+ case '\'': separatorStack.push_back("'"); ignoreNesting=true; break;
+ case '"' : separatorStack.push_back("\""); ignoreNesting=true; break;
+ default:;
+ }
+ }
+ ++pos;
}
}
if ( myArgs.Length() < index )
return theEmptyString; // no word found
// end
end = beg + 1;
- while ( end <= theString.Length() && isWord( theString.Value( end ), dotIsWord))
- ++end;
- --end;
+ char begChar = theString.Value( beg );
+ if ( begChar == '"' || begChar == '\'' || begChar == '[') {
+ char endChar = ( begChar == '[' ) ? ']' : begChar;
+ // end is at the corresponding quoting mark or bracket
+ while ( end < theString.Length() &&
+ ( theString.Value( end ) != endChar || theString.Value( end-1 ) == '\\'))
+ ++end;
+ }
+ else {
+ while ( end <= theString.Length() && isWord( theString.Value( end ), dotIsWord))
+ ++end;
+ --end;
+ }
}
else { // search backward
// end
if ( end == 0 )
return theEmptyString; // no word found
beg = end - 1;
- while ( beg > 0 && isWord( theString.Value( beg ), dotIsWord))
- --beg;
- ++beg;
+ char endChar = theString.Value( end );
+ if ( endChar == '"' || endChar == '\'' ) {
+ // beg is at the corresponding quoting mark
+ while ( beg > 1 &&
+ ( theString.Value( beg ) != endChar || theString.Value( beg-1 ) == '\\'))
+ --beg;
+ }
+ else {
+ while ( beg > 0 && isWord( theString.Value( beg ), dotIsWord))
+ --beg;
+ ++beg;
+ }
}
theStartPos = beg;
//cout << theString << " ---- " << beg << " - " << end << endl;
//================================================================================
/*!
* \brief Look for position where not space char is
- * \param theString - The string
+ * \param theString - The string
* \param thePos - The position to search from and which returns result
* \retval bool - false if there are only space after thePos in theString
- *
- *
+ *
+ *
*/
//================================================================================
case METHOD_IND: seperator = "()"; break;
default:;
}
- }
+ }
myString.Remove( pos, theOldPart.Length() );
if ( !seperator.IsEmpty() )
myString.Insert( pos , seperator );
if ( pos < 1 ) // no index-th arg exist, append inexistent args
{
// find a closing parenthesis
- if ( int lastArgInd = GetNbArgs() ) {
+ if ( GetNbArgs() != 0 && index <= GetNbArgs() ) {
+ int lastArgInd = GetNbArgs();
pos = GetBegPos( ARG1_IND + lastArgInd - 1 ) + GetArg( lastArgInd ).Length();
while ( pos > 0 && pos <= Length() && myString.Value( pos ) != ')' )
++pos;
return childID.SubString( 1, colPos-1 );
return "";
}
+
+//================================================================================
+/*!
+ * \brief SelfEraser erases creation command if no more it's commands invoked
+ */
+//================================================================================
+
+void _pySelfEraser::Flush()
+{
+ if ( GetNbCalls() == 0 )
+ GetCreationCmd()->Clear();
+}
+
+//================================================================================
+/*!
+ * \brief count invoked commands
+ */
+//================================================================================
+
+void _pySubMesh::Process( const Handle(_pyCommand)& theCommand )
+{
+ _pyObject::Process(theCommand); // count calls of Process()
+ GetCreationCmd()->AddDependantCmd( theCommand );
+}
+
+//================================================================================
+/*!
+ * \brief Clear creation command if no commands invoked
+ */
+//================================================================================
+
+void _pySubMesh::Flush()
+{
+ if ( GetNbCalls() == 0 ) // move to the end of all commands
+ theGen->GetLastCommand()->AddDependantCmd( GetCreationCmd() );
+ else if ( !myCreator.IsNull() )
+ // move to be just after creator
+ myCreator->GetCreationCmd()->AddDependantCmd( GetCreationCmd() );
+}
+
+//================================================================================
+/*!
+ * \brief To convert creation of a group by filter
+ */
+//================================================================================
+
+void _pyGroup::Process( const Handle(_pyCommand)& theCommand)
+{
+ // Convert the following set of commands into mesh.MakeGroupByFilter(groupName, theFilter)
+ // group = mesh.CreateEmptyGroup( elemType, groupName )
+ // aFilter.SetMesh(mesh)
+ // nbAdd = group.AddFrom( aFilter )
+ if ( theCommand->GetMethod() == "AddFrom" )
+ {
+ _pyID idSource = theCommand->GetArg(1);
+ // check if idSource is a filter
+ Handle(_pyObject) filter = theGen->FindObject( idSource );
+ if ( filter.IsNull() || !filter->IsKind(STANDARD_TYPE(_pyFilter)))
+ return;
+ // find aFilter.SetMesh(mesh) to clear it, it should be just before theCommand
+ list< Handle(_pyCommand) >::reverse_iterator cmdIt = theGen->GetCommands().rbegin();
+ while ( *cmdIt != theCommand ) ++cmdIt;
+ while ( (*cmdIt)->GetOrderNb() != 1 )
+ {
+ const Handle(_pyCommand)& setMeshCmd = *(++cmdIt);
+ if ((setMeshCmd->GetObject() == idSource ||
+ setMeshCmd->GetObject() == Handle(_pyFilter)::DownCast(filter)->GetNewID() )
+ &&
+ setMeshCmd->GetMethod() == "SetMesh")
+ {
+ setMeshCmd->Clear();
+ break;
+ }
+ }
+ // replace 3 commands by one
+ theCommand->Clear();
+ const Handle(_pyCommand)& makeGroupCmd = GetCreationCmd();
+ TCollection_AsciiString name = makeGroupCmd->GetArg( 2 );
+ makeGroupCmd->SetMethod( "MakeGroupByFilter" );
+ makeGroupCmd->SetArg( 1, name );
+ makeGroupCmd->SetArg( 2, idSource );
+ // set new name of a filter
+ filter->Process( makeGroupCmd );
+ }
+ else if ( theCommand->GetMethod() == "SetFilter" )
+ {
+ // set new name of a filter
+ _pyID filterID = theCommand->GetArg(1);
+ Handle(_pyObject) filter = theGen->FindObject( filterID );
+ if ( !filter.IsNull() )
+ filter->Process( theCommand );
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Constructor of _pyFilter
+ */
+//================================================================================
+
+_pyFilter::_pyFilter(const Handle(_pyCommand)& theCreationCmd, const _pyID& newID/*=""*/)
+ :_pyObject(theCreationCmd), myNewID( newID )
+{
+}
+
+//================================================================================
+/*!
+ * \brief To convert creation of a filter by criteria and
+ * to replace an old name by a new one
+ */
+//================================================================================
+
+void _pyFilter::Process( const Handle(_pyCommand)& theCommand)
+{
+ if ( theCommand->GetObject() == GetID() )
+ _pyObject::Process(theCommand); // count commands
+
+ if ( !myNewID.IsEmpty() )
+ {
+ if ( theCommand->GetObject() == GetID() )
+ theCommand->SetObject( myNewID );
+ else if ( theCommand->GetResultValue() == GetID() )
+ theCommand->SetResultValue( myNewID );
+ else
+ for ( int i = 1, nb = theCommand->GetNbArgs(); i <= nb; ++i )
+ if ( theCommand->GetArg( i ) == GetID() )
+ {
+ theCommand->SetArg( i, myNewID );
+ break;
+ }
+ }
+
+ // Convert the following set of commands into smesh.GetFilterFromCriteria(criteria)
+ // aFilter0x2aaab0487080 = aFilterManager.CreateFilter()
+ // aFilter0x2aaab0487080.SetCriteria(aCriteria)
+ if ( GetNbCalls() == 0 && // none method was called before SetCriteria()
+ theCommand->GetMethod() == "SetCriteria")
+ {
+ // aFilter.SetCriteria(aCriteria) ->
+ // aFilter = smesh.GetFilterFromCriteria(criteria)
+ if ( myNewID.IsEmpty() )
+ theCommand->SetResultValue( GetID() );
+ else
+ theCommand->SetResultValue( myNewID );
+ theCommand->SetObject( SMESH_2smeshpy::GenName() );
+ theCommand->SetMethod( "GetFilterFromCriteria" );
+
+ // Clear aFilterManager.CreateFilter()
+ GetCreationCmd()->Clear();
+ }
+ else if ( theCommand->GetMethod() == "SetMesh")
+ {
+ theGen->AddMeshAccessorMethod( theCommand );
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Set new filter name to the creation command
+ */
+//================================================================================
+
+void _pyFilter::Flush()
+{
+ if ( !myNewID.IsEmpty() && !GetCreationCmd()->IsEmpty() )
+ GetCreationCmd()->SetResultValue( myNewID );
+}
