<source>MED_FILES_FILTER</source>
<translation>MED files</translation>
</message>
- <message>
- <source>SAUV_FILES_FILTER</source>
- <translation>SAUV files</translation>
- </message>
<message>
<source>IDEAS_FILES_FILTER</source>
<translation>IDEAS files</translation>
<source>CGNS_EXPORT_ELEMS_BY_TYPE</source>
<translation>Group elements by type</translation>
</message>
+ <message>
+ <source>STRUCTUREDCGNS</source>
+ <translation>Structured version (only for Hexahedron(i,j,k) and Quadrangle: Mapping meshes)</translation>
+ </message>
<message>
<source>GMF_ASCII_FILES_FILTER</source>
<translation>GMF ASCII files</translation>
<source>BARE_BORDER_VOLUME</source>
<translation>Volumes with bare border</translation>
</message>
+ <message>
+ <source>SCALED_JACOBIAN</source>
+ <translation>Scaled Jacobian</translation>
+ </message>
<message>
<source>OVER_CONSTRAINED_VOLUME</source>
<translation>Over-constrained volumes</translation>
<source>ASPECTRATIO_3D_ELEMENTS</source>
<translation>Aspect Ratio 3D</translation>
</message>
+ <message>
+ <source>WARPING_3D_ELEMENTS</source>
+ <translation>Warping 3D</translation>
+ </message>
<message>
<source>ASPECTRATIO_ELEMENTS</source>
<translation>Aspect Ratio</translation>
<message>
<source>EDITERR_NO_MEDIUM_ON_GEOM</source>
<translation>Some medium nodes not placed on geometry to avoid
- distorting elements shown in magenta</translation>
+ distorting elements shown in magenta.</translation>
</message>
<message>
<source>SMESH_GEOM</source>
<source>MEN_COPY_MESH</source>
<translation>Copy Mesh</translation>
</message>
+ <message>
+ <source>MEN_CREATE_DUAL_MESH</source>
+ <translation>Create Dual Mesh</translation>
+ </message>
<message>
<source>MEN_CLIP</source>
<translation>Clipping</translation>
<source>MEN_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
- <message>
- <source>MEN_REF_ALL</source>
- <translation>Uniform refinement</translation>
- </message>
- <message>
- <source>MEN_REF_HOMARD</source>
- <translation>Adaptation with HOMARD</translation>
- </message>
- <message>
- <source>MEN_HOMARD_CREATE_CASE</source>
- <translation>New case for adaptation with HOMARD</translation>
- </message>
- <message>
- <source>MEN_HOMARD_FOLLOW_ITERATION</source>
- <translation>Existing case</translation>
- </message>
- <message>
- <source>MEN_HOMARD_NEW_ITERATION</source>
- <translation>New iteration</translation>
- </message>
- <message>
- <source>MEN_HOMARD_COMPUTE</source>
- <translation>Compute</translation>
- </message>
- <message>
- <source>MEN_HOMARD_COMPUTE_PUBLISH</source>
- <translation>Compute and publish</translation>
- </message>
<message>
<source>MEN_MG_ADAPT</source>
<translation>Remesh with MG_Adapt</translation>
</message>
+ <message>
+ <source>MEN_HOMARD_ADAPT</source>
+ <translation>Uniform refinement</translation>
+ </message>
<message>
<source>Args</source>
<translation>Arguments</translation>
<source>Publish_MG_ADAPT</source>
<translation>Publish</translation>
</message>
-<message>
+ <message>
<source>SIZE_MAP_FIELD</source>
<translation>Size map field</translation>
</message>
<source>MG_ADAPT_MED_FILE_5</source>
<translation>No field in this MED file.</translation>
</message>
- <message>
- <source>MG_ADAPT_MED_FILE_6</source>
- <translation>The field(s) in this MED file cannot be read.</translation>
- </message>
<message>
<source>MG_ADAPT_ERROR</source>
<translation>Error</translation>
</message>
<message>
<source>LOCAL_MG_ADAPT</source>
- <translation>local</translation>
+ <translation>Local</translation>
</message>
<message>
<source>BACKGRND_MG_ADAPT</source>
</message>
<message>
<source>SIZE_MAP_DEF</source>
- <translation>size map definition</translation>
+ <translation>Size map definition</translation>
</message>
<message>
<source>ADVOP</source>
<translation>Advanced Options</translation>
</message>
+ <message>
+ <source>MG_ADAPT_DIAG_1</source>
+ <translation>Adaptation succeeded.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_DIAG_2</source>
+ <translation>Adaptation failed.</translation>
+ </message>
<message>
<source>MEN_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>MEN_2D_FROM_3D</source>
<translation>Create boundary elements</translation>
</message>
+ <message>
+ <source>MEN_2D_FROM_3D_ELEMENTS</source>
+ <translation>Create 2D mesh from 3D elements</translation>
+ </message>
<message>
<source>MEN_MESH_ORDER</source>
<translation>Change sub-mesh priority</translation>
<source>MEN_EXPORT_GMF</source>
<translation>Export to GMF file</translation>
</message>
- <message>
- <source>MEN_EXPORT_SAUV</source>
- <translation>Export to SAUV file</translation>
- </message>
<message>
<source>MEN_EXPORT_STL</source>
<translation>Export to STL file</translation>
<translation>GMF file</translation>
</message>
<message>
- <source>MEN_IMPORT_SAUV</source>
- <translation>SAUV file</translation>
+ <source>MEN_IMPORT_MESHIO</source>
+ <translation>other formats... (meshio)</translation>
</message>
<message>
- <source>MEN_SAUV</source>
- <translation>SAUV file</translation>
+ <source>MEN_EXPORT_MESHIO</source>
+ <translation>other formats... (meshio)</translation>
</message>
<message>
<source>MEN_MERGE</source>
<source>MEN_MESH_THROU_POINT</source>
<translation>Move Node</translation>
</message>
+ <message>
+ <source>MEN_MOVE_NODE_INTRCT</source>
+ <translation>Move node by mouse</translation>
+ </message>
+ <message>
+ <source>MEN_SPLIT_DIAG_INTRC</source>
+ <translation>Add node on segment</translation>
+ </message>
+ <message>
+ <source>MEN_SPLIT_FACE_INTRC</source>
+ <translation>Add node to triangle</translation>
+ </message>
<message>
<source>MEN_MIN_ANG</source>
<translation>Minimum Angle</translation>
<source>MEN_REMOVE_NODES</source>
<translation>Nodes</translation>
</message>
+ <message>
+ <source>MEN_REMOVE_NODE_RECON</source>
+ <translation>Node with reconnection</translation>
+ </message>
<message>
<source>MEN_REMOVE_ORPHAN_NODES</source>
<translation>Orphan Nodes</translation>
</message>
<message>
<source>MEN_SAVE_DISTRIBUTION</source>
- <translation>Export ...</translation>
+ <translation>Export the distribution...</translation>
</message>
<message>
<source>MEN_SHOW_DISTRIBUTION</source>
<source>MEN_VOLUME_3D</source>
<translation>Volume</translation>
</message>
+ <message>
+ <source>MEN_SCALED_JACOBIAN</source>
+ <translation>Scaled Jacobian</translation>
+ </message>
<message>
<source>MEN_WARP</source>
<translation>Warping Angle</translation>
</message>
+ <message>
+ <source>MEN_WARP_3D</source>
+ <translation>Warping 3D</translation>
+ </message>
<message>
<source>MEN_WHAT_IS</source>
<translation>Mesh Element Information</translation>
<source>SMESH_AUTO_DIM</source>
<translation>Automatically define space dimension</translation>
</message>
+ <message>
+ <source>SMESH_MED_SAVE_NUMS</source>
+ <translation>Export indices</translation>
+ </message>
<message>
<source>SMESH_ZTOLERANCE</source>
<translation>Z tolerance</translation>
Probably, there is not enough space on disk, or the version of MED file used is not compatible with the mesh.
</translation>
</message>
+ <message>
+ <source>SMESH_EXPORT_FAILED_SHORT</source>
+ <translation>Mesh export failed.</translation>
+ </message>
<message>
<source>SMESH_EXPORT_MED_DUPLICATED_GRP</source>
<translation>There are duplicated group names in mesh "%1".
meshes with the following names: %1
The result file may be incorrect.
Overwrite the file?</translation>
+ </message>
+ <message>
+ <source>SMESH_EXPORT_MESHIO_ONLY_MESH</source>
+ <translation>Current implementation uses export through intermediate MED file.
+However, meshio does not support reading MED files with more than one mesh.
+Selected meshes will be saved into separated files.
+
+Do you want to continue?</translation>
+ </message>
+ <message>
+ <source>SMESH_MESHIO_NOT_INSTALLED</source>
+ <translation>Meshio is not installed!
+Operation will be canceled.
+
+Try to install meshio with a command:
+pip install meshio[all]</translation>
</message>
<message>
<source>EXPORT_NOT_SUPPORTED</source>
<source>SMESH_LOGARITHMIC_SCALARBAR</source>
<translation>Logarithmic</translation>
</message>
+ <message>
+ <source>SMESH_TRESHOLD_SCALARBAR</source>
+ <translation>Threshold</translation>
+ </message>
+ <message>
+ <source>SMESH_WIREFRAME_OFF_SCALARBAR</source>
+ <translation>Wireframe Off</translation>
+ </message>
<message>
<source>SMESH_MAKE_GROUPS</source>
<translation>Generate groups</translation>
<source>SMESH_RENUMBERING</source>
<translation>Renumbering</translation>
</message>
+ <message>
+ <source>SMESH_RENUMBER</source>
+ <translation>Renumber</translation>
+ </message>
<message>
<source>SMESH_RENUMBERING_ELEMENTS_TITLE</source>
<translation>Renumbering elements</translation>
<translation>None</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_PUBLICATION</source>
- <translation>Publication of meshes with HOMARD</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_IN</source>
- <translation>IN mesh</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_OUT</source>
- <translation>OUT mesh</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_YACS</source>
- <translation>A YACS schema with HOMARD</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_YACS_MAX_ITER</source>
- <translation>Maximal number of iterations</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_YACS_MAX_NODE</source>
- <translation>Maximal number of nodes</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_YACS_MAX_ELEM</source>
- <translation>Maximal number of elements</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_YACS_TYPE_CONVERGENCE</source>
- <translation>Test type for a YACS schema with HOMARD</translation>
+ <source>ADAPT_WITH_HOMARD</source>
+ <translation>Adaptation with HOMARD</translation>
</message>
<message>
<source>ADAPT_PREF_MG_ADAPT</source>
<source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
<translation>Background</translation>
</message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_MED_SIZE_MAP_BACKGROUND</source>
- <translation>MED file background size map</translation>
- </message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
- <translation>Time step</translation>
- </message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_NO_TIME_STEP</source>
- <translation>No time step</translation>
- </message>
<message>
<source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
<translation>Last</translation>
</message>
<message>
- <source>ADAPT_PREF_MG_ADAPT_AR</source>
- <translation>Arguments</translation>
- </message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
- <translation>Advanced Options</translation>
- </message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_TIME_LAST_STEP</source>
- <translation>Last time step</translation>
- </message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_TIME_C_STEP</source>
- <translation>Chosen time step</translation>
+ <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+ <translation>Choosen time step</translation>
</message>
<message>
<source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
<source>MG_ADAPT_SELECT_FILE_0</source>
<translation>MG-ADAPT select file</translation>
</message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
+ <translation>Advanced Options</translation>
+ </message>
<message>
<source>SMESH_VISU_PROBLEM</source>
<translation>Mesh visualization failed</translation>
<source>SMESH_Z</source>
<translation>Z</translation>
</message>
+ <message>
+ <source>SMESH_Z_SCALARBAR</source>
+ <translation>Z:</translation>
+ </message>
<message>
<source>STATE_ALGO_MISSING</source>
<translation>%3 %2D algorithm is missing</translation>
<source>STB_COPY_MESH</source>
<translation>Copy Mesh</translation>
</message>
+ <message>
+ <source>STB_CREATE_DUAL_MESH</source>
+ <translation>Create Dual Mesh</translation>
+ </message>
<message>
<source>STB_CLIP</source>
<translation>Clipping</translation>
<source>STB_COMPUTE</source>
<translation>Compute</translation>
</message>
+ <message>
+ <source>STB_RE_COMPUTE</source>
+ <translation>Clear + Compute</translation>
+ </message>
<message>
<source>STB_COMPUTE_SUBMESH</source>
<translation>Compute Sub-mesh</translation>
<source>STB_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
- <message>
- <source>STB_REF_ALL</source>
- <translation>Uniform refinement</translation>
- </message>
- <message>
- <source>STB_REF_HOMARD</source>
- <translation>Refinement with HOMARD</translation>
- </message>
- <message>
- <source>STB_HOMARD_CREATE_CASE</source>
- <translation>Creation of a new case for adaptation with HOMARD</translation>
- </message>
- <message>
- <source>STB_HOMARD_FOLLOW_ITERATION</source>
- <translation>Creation of a new case: pursuit of a stored iteration</translation>
- </message>
- <message>
- <source>STB_HOMARD_NEW_ITERATION</source>
- <translation>Creation of a next iteration</translation>
- </message>
- <message>
- <source>STB_HOMARD_COMPUTE</source>
- <translation>Compute the refinement</translation>
- </message>
- <message>
- <source>STB_HOMARD_COMPUTE_PUBLISH</source>
- <translation>Compute the refinement and publish the final mesh</translation>
- </message>
- <message>
- <source>STB_EDIT</source>
- <translation>Edit</translation>
- </message>
<message>
<source>STB_MG_ADAPT</source>
<translation>Remesh with MG_Adapt</translation>
</message>
+ <message>
+ <source>STB_HOMARD_ADAPT</source>
+ <translation>Uniform refinement</translation>
+ </message>
<message>
<source>STB_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>STB_2D_FROM_3D</source>
<translation>Create boundary elements</translation>
</message>
+ <message>
+ <source>STB_2D_FROM_3D_ELEMENTS</source>
+ <translation>Create 2D mesh from 3D elements</translation>
+ </message>
<message>
<source>STB_MESH_ORDER</source>
<translation>Change sub-mesh priority</translation>
<source>STB_EXPORT_GMF</source>
<translation>Export to GMF file</translation>
</message>
- <message>
- <source>STB_EXPORT_SAUV</source>
- <translation>Export to SAUV file</translation>
- </message>
<message>
<source>STB_EXPORT_STL</source>
<translation>Export to STL file</translation>
<source>STB_GMF</source>
<translation>Export GMF file</translation>
</message>
- <message>
- <source>STB_IMPORT_SAUV</source>
- <translation>Import SAUV file</translation>
- </message>
- <message>
- <source>STB_SAUV</source>
- <translation>Export SAUV file</translation>
- </message>
<message>
<source>STB_MERGE</source>
<translation>Merge nodes</translation>
<source>STB_MESH_THROU_POINT</source>
<translation>Move Node</translation>
</message>
+ <message>
+ <source>STB_MOVE_NODE_INTRCT</source>
+ <translation>Move Node by mouse</translation>
+ </message>
+ <message>
+ <source>STB_SPLIT_DIAG_INTRC</source>
+ <translation>Add node on segment</translation>
+ </message>
+ <message>
+ <source>STB_SPLIT_FACE_INTRC</source>
+ <translation>Add node to triangle</translation>
+ </message>
<message>
<source>STB_MIN_ANG</source>
<translation>Minimum Angle</translation>
<source>STB_REMOVE_NODES</source>
<translation>Remove nodes</translation>
</message>
+ <message>
+ <source>STB_REMOVE_NODE_RECON</source>
+ <translation>Remove node with reconnection</translation>
+ </message>
<message>
<source>STB_REMOVE_ORPHAN_NODES</source>
<translation>Remove orphan nodes</translation>
<source>STB_VOLUME_3D</source>
<translation>Volume</translation>
</message>
+ <message>
+ <source>STB_SCALED_JACOBIAN</source>
+ <translation>Scaled Jacobian</translation>
+ </message>
<message>
<source>STB_WARP</source>
<translation>Warping angle</translation>
</message>
+ <message>
+ <source>STB_WARP_3D</source>
+ <translation>Warping angle</translation>
+ </message>
<message>
<source>STB_WHAT_IS</source>
<translation>Show information about the mesh node or element</translation>
<source>TB_RENUMBER</source>
<translation>Renumbering Toolbar</translation>
</message>
+ <message>
+ <source>TB_INTERACT</source>
+ <translation>Interactive modifications Toolbar</translation>
+ </message>
<message>
<source>TB_TRANSFORM</source>
<translation>Transformation Toolbar</translation>
<source>TOP_COMPUTE</source>
<translation>Compute</translation>
</message>
+ <message>
+ <source>TOP_RE_COMPUTE</source>
+ <translation>Clear + Compute</translation>
+ </message>
<message>
<source>TOP_COMPUTE_SUBMESH</source>
<translation>Compute Sub-mesh</translation>
<source>TOP_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
- <message>
- <source>TOP_REF_ALL</source>
- <translation>Uniform refinement</translation>
- </message>
- <message>
- <source>TOP_HOMARD_CREATE_CASE</source>
- <translation>New case</translation>
- </message>
- <message>
- <source>TOP_HOMARD_FOLLOW_ITERATION</source>
- <translation>Existing case</translation>
- </message>
- <message>
- <source>TOP_HOMARD_NEW_ITERATION</source>
- <translation>New iteration</translation>
- </message>
- <message>
- <source>TOP_HOMARD_COMPUTE</source>
- <translation>Compute</translation>
- </message>
- <message>
- <source>TOP_HOMARD_COMPUTE_PUBLISH</source>
- <translation>Compute and publish</translation>
- </message>
<message>
<source>TOP_MG_ADAPT</source>
<translation>Remesh with MG_Adapt</translation>
</message>
+ <message>
+ <source>TOP_HOMARD_ADAPT</source>
+ <translation>Uniform refinement</translation>
+ </message>
<message>
<source>TOP_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>TOP_2D_FROM_3D</source>
<translation>Create boundary elements</translation>
</message>
+ <message>
+ <source>TOP_2D_FROM_3D_ELEMENTS</source>
+ <translation>Create 2D mesh from 3D elements</translation>
+ </message>
<message>
<source>TOP_MESH_ORDER</source>
<translation>Change sub-mesh priority</translation>
<source>TOP_EXPORT_MED</source>
<translation>Export to MED file</translation>
</message>
- <message>
- <source>TOP_EXPORT_SAUV</source>
- <translation>Export to SAUV file</translation>
- </message>
<message>
<source>TOP_EXPORT_STL</source>
<translation>Export to STL file</translation>
<source>TOP_GMF</source>
<translation>Export GMF file</translation>
</message>
- <message>
- <source>TOP_IMPORT_SAUV</source>
- <translation>Import SAUV file</translation>
- </message>
- <message>
- <source>TOP_SAUV</source>
- <translation>Export SAUV file</translation>
- </message>
<message>
<source>TOP_MERGE</source>
<translation>Merge nodes</translation>
<source>TOP_MESH_THROU_POINT</source>
<translation>Move Node</translation>
</message>
+ <message>
+ <source>TOP_MOVE_NODE_INTRCT</source>
+ <translation>Move node by mouse</translation>
+ </message>
+ <message>
+ <source>TOP_SPLIT_DIAG_INTRC</source>
+ <translation>Add node on segment</translation>
+ </message>
+ <message>
+ <source>TOP_SPLIT_FACE_INTRC</source>
+ <translation>Add node to triangle</translation>
+ </message>
<message>
<source>TOP_MIN_ANG</source>
<translation>Minimum Angle</translation>
<source>TOP_REMOVE_NODES</source>
<translation>Remove nodes</translation>
</message>
+ <message>
+ <source>TOP_REMOVE_NODE_RECON</source>
+ <translation>Remove node with reconnection</translation>
+ </message>
<message>
<source>TOP_REMOVE_ORPHAN_NODES</source>
<translation>Remove orphan nodes</translation>
<source>TOP_VOLUME_3D</source>
<translation>Volume</translation>
</message>
+ <message>
+ <source>TOP_SCALED_JACOBIAN</source>
+ <translation>Scaled Jacobian</translation>
+ </message>
<message>
<source>TOP_WARP</source>
<translation>Warping angle</translation>
</message>
+ <message>
+ <source>TOP_WARP_3D</source>
+ <translation>Warping 3D</translation>
+ </message>
<message>
<source>TOP_WHAT_IS</source>
<translation>Mesh Element Information</translation>
<source>WARP_ELEMENTS</source>
<translation>Warping</translation>
</message>
+ <message>
+ <source>WARP_3D_ELEMENTS</source>
+ <translation>Warping 3D</translation>
+ </message>
<message>
<source>MEN_FILE_INFO</source>
<translation>File Information</translation>
</message>
<message>
<source>NB_GROUPS_CREATED</source>
- <translation>%1 groups of faces created</translation>
+ <translation>%1 group(s) of faces created</translation>
</message>
</context>
<context>
<source>PREF_SHOW_WARN</source>
<translation>Show warning when exporting group</translation>
</message>
+ <message>
+ <source>PREF_MED_SAVE_NUMS</source>
+ <translation>Save cell/node numbers to MED file</translation>
+ </message>
<message>
<source>PREF_ZTOLERANCE</source>
<translation>Z tolerance for MED export</translation>
<translation>Warning: mesh can become non-conformal</translation>
</message>
</context>
+<context>
+ <name>SMESHGUI_CreateDualMeshDlg</name>
+ <message>
+ <source>CAPTION</source>
+ <translation>Create Dual Mesh</translation>
+ </message>
+ <message>
+ <source>MESH</source>
+ <translation>Mesh or Sub-mesh</translation>
+ </message>
+ <message>
+ <source>NON_TETRA_MESH_WARNING</source>
+ <translation>Warning: mesh must have only Tetrahedron 3D elements</translation>
+ </message>
+ <message>
+ <source>DUAL_MESH_NAME</source>
+ <translation>Name of the dual mesh</translation>
+ </message>
+ <message>
+ <source>PROJ_SHAPE</source>
+ <translation>Project boundary elements on shape</translation>
+ </message>
+</context>
<context>
<name>SMESHGUI_ConvToQuadOp</name>
<message>
<source>ASPECT_RATIO_3D</source>
<translation>Aspect ratio 3D</translation>
</message>
+ <message>
+ <source>WARPING_3D</source>
+ <translation>Warping 3D</translation>
+ </message>
<message>
<source>BAD_ORIENTED_VOLUME</source>
<translation>Bad oriented volume</translation>
<source>VOLUME_3D</source>
<translation>Volume</translation>
</message>
+ <message>
+ <source>SCALED_JACOBIAN</source>
+ <translation>Scaled Jacobian</translation>
+ </message>
<message>
<source>WARPING</source>
<translation>Warping</translation>
<source>DESTINATION</source>
<translation>Destination</translation>
</message>
+ <message>
+ <source>DESTINATION_BY_MOUSE</source>
+ <translation>Destination by mouse click</translation>
+ </message>
<message>
<source>MOVE_NODE</source>
<translation>Move node</translation>
<translation>Mesh to modify not selected</translation>
</message>
</context>
+<context>
+ <name>SMESHGUI_AddNodeOnSegmentDlg</name>
+ <message>
+ <source>CAPTION</source>
+ <translation>Add node to segment</translation>
+ </message>
+ <message>
+ <source>SEGMENT_GROUP</source>
+ <translation>Edge between neighboring triangles</translation>
+ </message>
+ <message>
+ <source>SEGMENT</source>
+ <translation>Edge</translation>
+ </message>
+ <message>
+ <source>POSITION_GROUP</source>
+ <translation>Node on Edge</translation>
+ </message>
+ <message>
+ <source>POSITION</source>
+ <translation>Location by mouse click</translation>
+ </message>
+</context>
+<context>
+ <name>SMESHGUI_AddNodeOnSegmentOp</name>
+ <message>
+ <source>INVALID_EDGE</source>
+ <translation>Edge is invalid</translation>
+ </message>
+ <message>
+ <source>INVALID_MESH</source>
+ <translation>Mesh to modify not selected</translation>
+ </message>
+ <message>
+ <source>NO_ELEMENTS</source>
+ <translation>Edge belongs to none face</translation>
+ </message>
+ <message>
+ <source>VOLUME_FOUND</source>
+ <translation>Can't split an edge of a volume</translation>
+ </message>
+ <message>
+ <source>NOT_TRIANGLE_FACE_FOUND</source>
+ <translation>Operation applies to triangles only</translation>
+ </message>
+ <message>
+ <source>BAD_POSITION</source>
+ <translation>Position on edge is incorrect</translation>
+ </message>
+</context>
+<context>
+ <name>SMESHGUI_AddNodeOnFaceDlg</name>
+ <message>
+ <source>CAPTION</source>
+ <translation>Add node to triangle</translation>
+ </message>
+ <message>
+ <source>FACE_GROUP</source>
+ <translation>Triangle to split</translation>
+ </message>
+ <message>
+ <source>FACE_ID</source>
+ <translation>ID</translation>
+ </message>
+ <message>
+ <source>XYZ_GROUP</source>
+ <translation>Node location by mouse click</translation>
+ </message>
+ <message>
+ <source>XYZ_NODE_ON_FACE</source>
+ <translation>Node on face</translation>
+ </message>
+</context>
+<context>
+ <name>SMESHGUI_AddNodeOnFaceOp</name>
+ <message>
+ <source>INVALID_MESH</source>
+ <translation>Mesh to modify not selected</translation>
+ </message>
+ <message>
+ <source>NOT_FACE</source>
+ <translation>Not a face selected</translation>
+ </message>
+ <message>
+ <source>INVALID_ID</source>
+ <translation>Face ID is invalid</translation>
+ </message>
+</context>
+<context>
+ <name>SMESHGUI_RemoveNodeReconnectionDlg</name>
+ <message>
+ <source>CAPTION</source>
+ <translation>Remove Node with Reconnection</translation>
+ </message>
+ <message>
+ <source>NODE_2REMOVE_ID</source>
+ <translation>ID</translation>
+ </message>
+ <message>
+ <source>NODE_2REMOVE</source>
+ <translation>Node</translation>
+ </message>
+</context>
+<context>
+ <name>SMESHGUI_RemoveNodeReconnectionOp</name>
+ <message>
+ <source>INVALID_ID</source>
+ <translation>Node ID is invalid</translation>
+ </message>
+ <message>
+ <source>INVALID_MESH</source>
+ <translation>Mesh to modify not selected</translation>
+ </message>
+</context>
<context>
<name>SMESHGUI_FindElemByPointDlg</name>
<message>
<translation>Generate</translation>
</message>
</context>
+<context>
+ <name>SMESHGUI_MakeFull2DFrom3DDlg</name>
+ <message>
+ <source>CAPTION</source>
+ <translation>Create 2D mesh from 3D elements</translation>
+ </message>
+ <message>
+ <source>2D_FROM_3D_ELEMENTS</source>
+ <translation>2D from 3D</translation>
+ </message>
+</context>
<context>
<name>SMESHGUI_Make2DFrom3DDlg</name>
<message>
<translation>Create group</translation>
</message>
</context>
+<context>
+ <name>SMESHGUI_MakeFull2DFrom3DOp</name>
+ <message>
+ <source>NB_ADDED</source>
+ <translation>%1 boundary elements have been added</translation>
+ </message>
+ <message>
+ <source>WRONG_GROUPS</source>
+ <translation>The following groups have not been processed
+as they are of improper type:
+%1</translation>
+ </message>
+ <message>
+ <source>SMESH_ERR_NO_INPUT_MESH</source>
+ <translation>Source mesh is not specified</translation>
+ </message>
+ <message>
+ <source>SMESH_TOO_MANY_MESHES</source>
+ <translation>Only one mesh can be processed at once</translation>
+ </message>
+ <message>
+ <source>SMESH_NOT_ONLY_GROUPS</source>
+ <translation>Can't process meshes and groups at once</translation>
+ </message>
+ <message>
+ <source>SMESH_ERR_NO_3D_ELEMENTS</source>
+ <translation>The source objects do not contain 3D elements</translation>
+ </message>
+ <message>
+ <source>SMESH_ERR_MESH_NAME_NOT_SPECIFIED</source>
+ <translation>New mesh name is not specified</translation>
+ </message>
+ <message>
+ <source>SMESH_ERR_GRP_NAME_NOT_SPECIFIED</source>
+ <translation>Group name is not specified</translation>
+ </message>
+</context>
<context>
<name>SMESHGUI_Make2DFrom3DOp</name>
<message>
<source>OBJECT</source>
<translation>Object</translation>
</message>
+ <message>
+ <source>OBJECTS</source>
+ <translation>Objects</translation>
+ </message>
<message>
<source>POINT</source>
<translation>Point</translation>
<source>VOLUMES</source>
<translation>Volumes</translation>
</message>
+ <message>
+ <source>REF_GROUPS</source>
+ <translation>Ref. objects (optional)</translation>
+ </message>
<message>
<source>OUTSIDE_VOLUME_NORMAL</source>
<translation>Face normal outside volume</translation>
<translation>Mean Size</translation>
</message>
</context>
+<context>
+ <name>SMESHGUI_SpinBoxForbiddendRange</name>
+ <message>
+ <source>VALID_RANGE_NOVAR_MSG</source>
+ <translation>Specify a floating-point value in range [%1; %2) U (%3; %4]
+with %5-digit precision</translation>
+ </message>
+</context>
</TS>