Les préférences pour MG-Adapt

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 6355806975cb351839e35a882fb5c3bc6565bb3e..2c68a790bf4a5595f037e9d3bb7df5ccef752483 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -308,6 +308,14 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_RE_COMPUTE</source>
+        <translation>Clear + Compute</translation>
+    </message>
+    <message>
+        <source>MEN_SHOW_ERRORS</source>
+        <translation>Show Compute Errors</translation>
+    </message>
     <message>
         <source>MEN_COMPUTE_SUBMESH</source>
         <translation>Compute Sub-mesh</translation>
@@ -332,6 +340,38 @@
         <source>MEN_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>MEN_REF_ALL</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>MEN_REF_HOMARD</source>
+        <translation>Refinement with HOMARD</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_CREATE_CASE</source>
+        <translation>New case</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_FOLLOW_ITERATION</source>
+        <translation>Existing case</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_NEW_ITERATION</source>
+        <translation>New iteration</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>MEN_HOMARD_COMPUTE_PUBLISH</source>
+        <translation>Compute and publish</translation>
+    </message>
+    <message>
+        <source>MEN_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
     <message>
         <source>MEN_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -780,6 +820,10 @@
         <source>MEN_MODIFY</source>
         <translation>Modification</translation>
     </message>
+    <message>
+        <source>MEN_ADAPT</source>
+        <translation>Adaptation</translation>
+    </message>
     <message>
         <source>MEN_MEASURE</source>
         <translation>Measurements</translation>
@@ -1494,6 +1538,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AVAILABLE</source>
         <translation>Available</translation>
     </message>
+    <message>
+        <source>SMESH_NOT_AVAILABLE</source>
+        <translation>Not available</translation>
+    </message>
     <message>
         <source>SMESH_AVAILABLE_ALGORITHMS</source>
         <translation>Available algorithms</translation>
@@ -2889,6 +2937,82 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MULTICOLOR</source>
         <translation>Multicolor</translation>
     </message>
+    <message>
+        <source>ADAPT_PREF_TAB_GENERAL</source>
+        <translation>Adaptation</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_NONE</source>
+        <translation>None</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_PUBLICATION</source>
+        <translation>Publication of meshes with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_IN</source>
+        <translation>IN mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_OUT</source>
+        <translation>OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS</source>
+        <translation>A YACS schema with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_MAX_ITER</source>
+        <translation>Maximal number of iterations</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_MAX_NODE</source>
+        <translation>Maximal number of nodes</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_MAX_ELEM</source>
+        <translation>Maximal number of elements</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_HOMARD_YACS_TYPE_CONVERGENCE</source>
+        <translation>Test type for a YACS schema with HOMARD</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT</source>
+        <translation>Adaptation with MG-Adapt</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
+        <translation>Write the OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
+        <translation>Publication of the OUT mesh</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP</source>
+        <translation>Size map</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL</source>
+        <translation>Local</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
+        <translation>Background</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+        <translation>Time step</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
+        <translation>Last</translation>
+    </message>
+    <message>
+        <source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
+        <translation>Value</translation>
+    </message>
     <message>
         <source>SMESH_VISU_PROBLEM</source>
         <translation>Mesh visualization failed</translation>
@@ -3104,6 +3228,42 @@ Use Display Entity menu command to show them.
         <source>STB_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>STB_REF_ALL</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>STB_REF_HOMARD</source>
+        <translation>Refinement with HOMARD</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_CREATE_CASE</source>
+        <translation>Creation of a new case</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_FOLLOW_ITERATION</source>
+        <translation>Creation of a new case: pursuit of a stored iteration</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_NEW_ITERATION</source>
+        <translation>Creation of a next iteration</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_COMPUTE</source>
+        <translation>Compute the refinement</translation>
+    </message>
+    <message>
+        <source>STB_HOMARD_COMPUTE_PUBLISH</source>
+        <translation>Compute the refinement and publish the final mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT</source>
+        <translation>Edit</translation>
+    </message>
+    <message>
+        <source>STB_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
     <message>
         <source>STB_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -3700,6 +3860,10 @@ Use Display Entity menu command to show them.
         <source>TB_CTRL3D</source>
         <translation>Volume Controls Toolbar</translation>
     </message>
+    <message>
+        <source>TB_ADAPTATION</source>
+        <translation>Adaptation Toolbar</translation>
+    </message>
     <message>
         <source>TB_MEASUREM</source>
         <translation>Measurements Toolbar</translation>
@@ -3804,6 +3968,34 @@ Use Display Entity menu command to show them.
         <source>TOP_CONSTRUCT_GROUP</source>
         <translation>Construct Group</translation>
     </message>
+    <message>
+        <source>TOP_REF_ALL</source>
+        <translation>Uniform refinement</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_CREATE_CASE</source>
+        <translation>New case</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_FOLLOW_ITERATION</source>
+        <translation>Existing case</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_NEW_ITERATION</source>
+        <translation>New iteration</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>TOP_HOMARD_COMPUTE_PUBLISH</source>
+        <translation>Compute and publish</translation>
+    </message>
+    <message>
+        <source>TOP_MG_ADAPT</source>
+        <translation>Remesh with MG_Adapt</translation>
+    </message>
     <message>
         <source>TOP_CONV_TO_QUAD</source>
         <translation>Convert to/from quadratic</translation>
@@ -4435,8 +4627,8 @@ Use Display Entity menu command to show them.
     <message>
         <source>FULL_RECOMPUTE_QUESTION</source>
         <translation>
-The mesh has been edited since a last total re-compute 
-that may prevent successful computation. 
+The mesh has been edited since a last total re-compute
+that may prevent successful computation.
 Do you wish to re-compute the mesh totally to discard the modifications?
 </translation>
     </message>
@@ -4515,6 +4707,11 @@ It can&apos;t be deleted </translation>
       <source>MSG_BREAK_SHAPER_LINK</source>
       <translation>A link with Shaper model for object %1 will be broken.
 Continue?</translation>
+    </message>
+    <message>
+        <source>MSG_WARN_ON_GEOM_MODIF</source>
+        <translation>This action is prohibited since the geometry
+was changed and the mesh needs to be recomputed.</translation>
     </message>
     <message>
         <source>SMESH_ADVANCED</source>
@@ -4672,6 +4869,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_NB_SEGMENTS</source>
         <translation>Default Number of Segments</translation>
     </message>
+    <message>
+        <source>PREF_USE_MESHGEMS_HYPOSET</source>
+        <translation>Use MeshGems meshers when assigning set of hypotheses</translation>
+    </message>
     <message>
         <source>SMESH_PREF_MESH_LOADING</source>
         <translation>Mesh loading</translation>
@@ -6515,7 +6716,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>HYPOTHESES_SETS</source>
-        <translation>Assign a set of hypotheses</translation>
+        <translation>Assign a set of automatic hypotheses</translation>
     </message>
     <message>
         <source>MESH</source>
@@ -6529,6 +6730,10 @@ Please specify them and try again</translation>
         <source>NAME</source>
         <translation>Name</translation>
     </message>
+    <message>
+        <source>CREATE_ALL_GROUPS</source>
+        <translation>Create all Groups on Geometry</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOp</name>
@@ -6548,7 +6753,7 @@ Please specify them and try again</translation>
     <message>
         <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
         <translation>Geometry object is not defined.
-Do you want to create an empty mesh 
+Do you want to create an empty mesh
 without algorithms and hypotheses? </translation>
     </message>
     <message>
@@ -6622,8 +6827,8 @@ select mesh or sub-mesh and try again</translation>
     </message>
     <message>
         <source>CONCURRENT_SUBMESH_APPEARS</source>
-        <translation> 
-The assigned algorithm has the same priority as one assigned to an 
+        <translation>
+The assigned algorithm has the same priority as one assigned to an
 adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
 meshing boundary shared by two sub-meshes. Would you like to set
 the order of sub-mesh computation? </translation>
@@ -8233,7 +8438,7 @@ as they are of improper type:
     <message>
         <source>SUBSHAPES_NOT_FOUND_MSG</source>
         <translation>
-Some sub-shapes not found in the new geometry. They are listed 
+Some sub-shapes not found in the new geometry. They are listed
 below along with dependent mesh objects that are marked with
 red in the Object Browser.</translation>
     </message>
@@ -8493,4 +8698,11 @@ red in the Object Browser.</translation>
         <translation>Option value</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_GenericHypothesisCreator</name>
+    <message>
+        <source>AverageLengthForHypoSet</source>
+        <translation>Mean Size</translation>
+    </message>
+</context>
 </TS>