//================================================================================
SMESHGUI_MeshOp::SMESHGUI_MeshOp( const bool theToCreate, const bool theIsMesh )
: SMESHGUI_SelectionOp(),
- myToCreate( theToCreate ),
- myIsMesh( theIsMesh ),
myDlg( 0 ),
myShapeByMeshOp( 0 ),
+ myToCreate( theToCreate ),
+ myIsMesh( theIsMesh ),
myHypoSet( 0 )
{
if ( GeometryGUI::GetGeomGen()->_is_nil() )// check that GEOM_Gen exists
for ( int i = SMESH::DIM_0D; i <= SMESH::DIM_3D; i++ )
{
connect( myDlg->tab( i ), SIGNAL( createHyp( const int, const int ) ),
- this, SLOT( onCreateHyp( const int, const int ) ) );
+ this, SLOT( onCreateHyp( const int, const int ) ) );
connect( myDlg->tab( i ), SIGNAL( editHyp( const int, const int ) ),
- this, SLOT( onEditHyp( const int, const int ) ) );
+ this, SLOT( onEditHyp( const int, const int ) ) );
connect( myDlg->tab( i ), SIGNAL( selectAlgo( const int ) ),
- this, SLOT( onAlgoSelected( const int ) ) );
+ this, SLOT( onAlgoSelected( const int ) ) );
}
connect( myDlg, SIGNAL( hypoSet( const QString& )), SLOT( onHypoSet( const QString& )));
connect( myDlg, SIGNAL( geomSelectionByMesh( bool )), SLOT( onGeomSelectionByMesh( bool )));
}
}
SMESHGUI_SelectionOp::startOperation();
- // iterate through dimensions and get available algoritms, set them to the dialog
+ // iterate through dimensions and get available algorithms, set them to the dialog
_PTR(SComponent) aFather = SMESH::GetActiveStudyDocument()->FindComponent( "SMESH" );
for ( int i = SMESH::DIM_0D; i <= SMESH::DIM_3D; i++ )
{
if (aSeq->length() > 0) {
shapeDim = -1;
- for (int iss = 0; iss < aSeq->length() && shapeDim < 3; iss++) {
+ for ( CORBA::ULong iss = 0; iss < aSeq->length() && shapeDim < 3; iss++) {
GEOM::GEOM_Object_var aGeomVar = aSeq[iss];
switch ( aGeomVar->GetShapeType() ) {
case GEOM::SOLID: shapeDim = 3; break;
if (aDim == -1)
return;
- // find highest available dimension, all algos of this dimension are available for choice
- int aTopDim = -1;
- for (int i = SMESH::DIM_0D; i <= SMESH::DIM_3D; i++)
- if (isAccessibleDim( i ))
- aTopDim = i;
- if (aTopDim == -1)
- return;
-
const bool isSubmesh = ( myToCreate ? !myIsMesh : myDlg->isObjectShown( SMESHGUI_MeshDlg::Mesh ));
HypothesisData* algoData = hypData( aDim, Algo, theIndex );
QStringList anAvailable;
- // check that tab enabled of one less dimension
- if ( aDim > SMESH::DIM_0D )
- {
- if ( isAccessibleDim( aDim - 1 ) ) {
- if ( algoData && myIsOnGeometry ) {
- for (int i = aDim - 1; i >= SMESH::DIM_0D; i--) {
- if ( isAccessibleDim( i ) ) {
- myDlg->disableTab( i );
- setCurrentHyp(i, Algo, -1);
- }
- }
+ // enable / disable tabs
+ if ( myIsOnGeometry ) {
+ for (int i = SMESH::DIM_3D; i >= SMESH::DIM_0D; i--) {
+ if ( i > aDim ) {
+ if ( i > myMaxShapeDim ) myDlg->disableTab( i );
+ else myDlg->enableTab( i );
}
- }
- if ( algoData && myIsOnGeometry && !algoData->InputTypes.isEmpty() ) {
- myDlg->enableTab( aDim - 1 );
- }
- if ( !algoData ) {
- if ( aDim != SMESH::DIM_2D || ( aDim == SMESH::DIM_2D &&
- currentHyp( SMESH::DIM_2D, Algo ) < 0) ) {
- for (int i = aDim - 1; i >= SMESH::DIM_0D; i--)
- myDlg->enableTab( i );
+ else if ( i == aDim ) {
+ continue;
}
- else {
- for (int i = aDim - 1; i >= SMESH::DIM_0D; i--)
+ else {//( i < aDim )
+ if ( algoData && algoData->InputTypes.isEmpty() ) {
myDlg->disableTab( i );
+ for ( int type = Algo, nbTypes = nbDlgHypTypes(i); type < nbTypes; type++ )
+ setCurrentHyp(i, type, -1);
+ }
+ else {
+ myDlg->enableTab( i );
+ }
}
}
}
bool noCompatible = false;
for ( ; dim * dir <= lastDim * dir; dim += dir)
{
- HypothesisData* nextAlgo = 0;
- if ( myMaxShapeDim == SMESH::DIM_3D && a3DAlgo && dim == SMESH::DIM_2D ) {
- nextAlgo = a3DAlgo;
- }
if ( !isAccessibleDim( dim ))
continue;
if ( noCompatible ) { // the selected algo has no compatible ones
algoByDim[ dim ] = 0;
continue;
}
+ HypothesisData* nextAlgo = 0;
+ if ( myMaxShapeDim == SMESH::DIM_3D && a3DAlgo && dim == SMESH::DIM_2D ) {
+ nextAlgo = a3DAlgo;
+ }
// get currently selected algo
int algoIndex = currentHyp( dim, Algo );
HypothesisData* curAlgo = hypData( dim, Algo, algoIndex );
- if ( curAlgo ) { // some algo selected
- if ( !isCompatible( prevAlgo, curAlgo, Algo ))
- curAlgo = 0;
- }
- // set new available algoritms
QString anCompareType = currentMeshTypeName(myDlg->currentMeshType());
QString anCurrentCompareType = "";
anCurrentCompareType = (anCompareType == "HEXA" || anCompareType == "QUAD") ? "QUAD" : "TRIA";
nextAlgo = 0;
}
+
+ // set new available algorithms
availableHyps( dim, Algo, anAvailable, myAvailableHypData[dim][Algo], prevAlgo, nextAlgo, anCurrentCompareType);
HypothesisData* soleCompatible = 0;
if ( anAvailable.count() == 1 )
soleCompatible = myAvailableHypData[dim][Algo][0];
myDlg->tab( dim )->setAvailableHyps( Algo, anAvailable );
noCompatible = anAvailable.isEmpty();
- algoIndex = myAvailableHypData[dim][Algo].indexOf( curAlgo );
+ algoIndex = myAvailableHypData[dim][Algo].indexOf( curAlgo );
if ( !isSubmesh && algoIndex < 0 && soleCompatible && !forward && dim != SMESH::DIM_0D) {
// select the sole compatible algo
- algoIndex = myAvailableHypData[dim][Algo].indexOf( soleCompatible );
+ algoIndex = 0;
}
- setCurrentHyp( dim, Algo, algoIndex);
+ setCurrentHyp( dim, Algo, algoIndex );
// remember current algo
prevAlgo = algoByDim[ dim ] = hypData( dim, Algo, algoIndex );
+
+ } // loop on dims
+
+ if ( myMaxShapeDim == SMESH::DIM_3D && forward && algoDim == SMESH::DIM_1D )
+ {
+ algoDim = SMESH::DIM_3D;
+ forward = -1;
+ a3DAlgo = prevAlgo;
+ continue;
}
- if ( myMaxShapeDim == SMESH::DIM_3D && forward && algoDim == SMESH::DIM_1D ) {
- algoDim = SMESH::DIM_3D;
- forward = -1;
- a3DAlgo = prevAlgo;
- continue;
- }
- }
+ } // loops backward and forward
+
- // set hypotheses corresponding to the found algoritms
+ // set hypotheses corresponding to the found algorithms
_PTR(SObject) pObj = SMESH::GetActiveStudyDocument()->FindComponent("SMESH");
return anAlgoVar;
QString aHypName = dataList[ aHypIndex ]->TypeName;
- // get existing algoritms
+ // get existing algorithms
_PTR(SObject) pObj = SMESH::GetActiveStudyDocument()->FindComponent("SMESH");
QStringList tmp;
existingHyps( theDim, Algo, pObj, tmp, myExistingHyps[ theDim ][ Algo ]);
{
// get hypotheses
existingHyps( dim, hypType, pObj, anExisting, myObjHyps[ dim ][ hypType ] );
+ if ( myObjHyps[ dim ][ hypType ].count() == 0 ) {
+ setCurrentHyp( dim, hypType, -1 );
+ }
for ( int i = 0, nb = myObjHyps[ dim ][ hypType ].count(); i < nb; ++i )
{
// find index of required hypothesis among existing ones for this dimension and type
// First, remove old algos in order to avoid messages on algorithm hiding
for ( int dim = aDim; dim <= SMESH::DIM_3D; dim++ )
{
- if ( isAccessibleDim( dim ) && myObjHyps[ dim ][ Algo ].count() > 0 )
+ if ( /*isAccessibleDim( dim ) &&*/ myObjHyps[ dim ][ Algo ].count() > 0 )
{
SMESH::SMESH_Hypothesis_var anOldAlgo = myObjHyps[ dim ][ Algo ].first().first;
SMESH::SMESH_Hypothesis_var anAlgoVar = getAlgo( dim );
// Assign new algorithms and hypotheses
for ( int dim = aDim; dim <= SMESH::DIM_3D; dim++ )
{
- if ( !isAccessibleDim( dim )) continue;
+ //if ( !isAccessibleDim( dim )) continue;
// find or create algorithm
SMESH::SMESH_Hypothesis_var anAlgoVar = getAlgo( dim );
* \param theIndex - Index of current type of mesh
*/
//================================================================================
-void SMESHGUI_MeshOp::setFilteredAlgoData( const int theTabIndex, const int theIndex)
+void SMESHGUI_MeshOp::setFilteredAlgoData( const int theTabIndex, const int theIndex )
{
QStringList anAvailableAlgs;
QString anCompareType = currentMeshTypeName( theIndex );
anCurrentAvailableAlgo = -1;
isNone = currentHyp( dim, Algo ) < 0;
//return current algo in current tab and set new algorithm list
- HypothesisData* algoCur;
+ HypothesisData* algoCur = 0;
if ( !isNone && !myAvailableHypData[dim][Algo].empty() ) {
algoCur = myAvailableHypData[dim][Algo].at( currentHyp( dim, Algo ) );
}
setCurrentHyp( dim, Algo, anCurrentAvailableAlgo );
if ( anCurrentAvailableAlgo > -1 )
isReqDisBound = algoCur->InputTypes.isEmpty();
- else if ( dim != SMESH::DIM_3D && currentHyp( SMESH::DIM_3D, Algo ) >= 0 )
- isReqDisBound = true;
if ( isReqDisBound ) {
aReqDim = dim;
break;
}
else
for ( int i = SMESH::DIM_0D; i <= SMESH::DIM_3D; i++ ) {
- if ( i > myMaxShapeDim || ( isReqDisBound && i < aReqDim ) ) myDlg->disableTab( i );
- else myDlg->enableTab( i );
+ if ( i > myMaxShapeDim || ( isReqDisBound && i != aReqDim ) ) myDlg->disableTab( i );
+ else myDlg->enableTab( i );
}
myDlg->setCurrentTab( theTabIndex );
}
setCurrentHyp( dim, Algo, anCurrentAvailableAlgo );
}
- if ( isNone || isReqDisBound ) {
- for ( int i = SMESH::DIM_0D; i <= myMaxShapeDim; i++ ) {
- if ( aDim != i ) {
- myDlg->disableTab( i );
- }
- }
- }
- else if ( !isNone ) {
- if ( aDim == SMESH::DIM_2D) {
- myDlg->disableTab( SMESH::DIM_3D );
- setCurrentHyp( SMESH::DIM_3D, Algo, -1);
- }
- for ( int i = myMaxShapeDim; i > SMESH::DIM_0D; i-- ) {
- bool isNoneAlg = currentHyp( i, Algo ) < 0;
- if ( !isNoneAlg )
- isReqDisBound = myAvailableHypData[i][Algo].at( currentHyp( i, Algo ) )->InputTypes.isEmpty();
- else
- isReqDisBound = true;
- if ( isReqDisBound && isNoneAlg ) {
- for (int j = i - 1; j >= SMESH::DIM_0D; j--) {
- if ( j < aDim && currentHyp( j+1, Algo ) < 0 ) {
- myDlg->disableTab( j );
- setCurrentHyp( j , Algo, -1 );
- }
+ for ( int i = myMaxShapeDim; i >= SMESH::DIM_0D; i-- ) {
+ bool isNoneAlg = currentHyp( i, Algo ) < 0;
+ if ( !isNoneAlg )
+ isReqDisBound = myAvailableHypData[i][Algo].at( currentHyp( i, Algo ) )->InputTypes.isEmpty();
+ else
+ isReqDisBound = true;
+ if ( isReqDisBound && !isNoneAlg && i <= aDim) {
+ for (int j = myMaxShapeDim; j >= SMESH::DIM_0D; j--) {
+ if ( currentHyp( j, Algo ) < 0 ) {
+ myDlg->disableTab( j );
+ setCurrentHyp( j , Algo, -1 );
}
- break;
- }
- else if ( isNoneAlg ) {
- myDlg->disableTab( i );
}
+ break;
}
+ else {
+ myDlg->enableTab( i );
+ }
+ }
+ if ( aDim == SMESH::DIM_2D) {
+ myDlg->disableTab( SMESH::DIM_3D );
+ setCurrentHyp( SMESH::DIM_3D, Algo, -1);
}
- myDlg->enableTab( aDim );
- myDlg->setCurrentTab( aDim );
+
+ int currentTab = ( theTabIndex <= aDim ) ? theTabIndex : aDim;
+ myDlg->setCurrentTab( currentTab );
}
THypDataList anAvailableAlgsData;
QStringList aHypothesesSetsList = SMESH::GetHypothesesSets( aDim );
