-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// SMESH includes
#include "SMESHGUI.h"
+#include "SMESHGUI_AdaptDlg.h"
#include "SMESHGUI_Add0DElemsOnAllNodesDlg.h"
#include "SMESHGUI_AddMeshElementDlg.h"
#include "SMESHGUI_AddQuadraticElementDlg.h"
#include "SMESHGUI_CopyMeshDlg.h"
#include "SMESHGUI_CreatePolyhedralVolumeDlg.h"
#include "SMESHGUI_DeleteGroupDlg.h"
+#include "SMESHGUI_DisplayEntitiesDlg.h"
#include "SMESHGUI_Displayer.h"
#include "SMESHGUI_DuplicateNodesDlg.h"
#include "SMESHGUI_ExtrusionAlongPathDlg.h"
#include "SMESHGUI_ExtrusionDlg.h"
+#include "SMESHGUI_FaceGroupsSeparatedByEdgesDlg.h"
#include "SMESHGUI_FieldSelectorWdg.h"
#include "SMESHGUI_FileInfoDlg.h"
#include "SMESHGUI_FileValidator.h"
#include "SMESHGUI_FilterDlg.h"
#include "SMESHGUI_FilterLibraryDlg.h"
+#include "SMESHGUI_FilterUtils.h"
#include "SMESHGUI_FindElemByPointDlg.h"
+#include "SMESHGUI_GEOMGenUtils.h"
#include "SMESHGUI_GroupDlg.h"
#include "SMESHGUI_GroupOnShapeDlg.h"
#include "SMESHGUI_GroupOpDlg.h"
+#include "SMESHGUI_GroupUtils.h"
#include "SMESHGUI_Hypotheses.h"
+#include "SMESHGUI_HypothesesUtils.h"
#include "SMESHGUI_Make2DFrom3DOp.h"
#include "SMESHGUI_MakeNodeAtPointDlg.h"
#include "SMESHGUI_Measurements.h"
#include "SMESHGUI_MeshOp.h"
#include "SMESHGUI_MeshOrderOp.h"
#include "SMESHGUI_MeshPatternDlg.h"
+#include "SMESHGUI_MeshUtils.h"
#include "SMESHGUI_MultiEditDlg.h"
#include "SMESHGUI_NodesDlg.h"
+#include "SMESHGUI_OffsetDlg.h"
#include "SMESHGUI_Operations.h"
+#include "SMESHGUI_PatternUtils.h"
#include "SMESHGUI_Preferences_ScalarBarDlg.h"
#include "SMESHGUI_PropertiesDlg.h"
#include "SMESHGUI_RemoveElementsDlg.h"
#include "SMESHGUI_RevolutionDlg.h"
#include "SMESHGUI_RotationDlg.h"
#include "SMESHGUI_ScaleDlg.h"
-#include "SMESHGUI_OffsetDlg.h"
#include "SMESHGUI_Selection.h"
#include "SMESHGUI_SewingDlg.h"
#include "SMESHGUI_SingleEditDlg.h"
#include "SMESHGUI_SmoothingDlg.h"
+#include "SMESHGUI_SpinBox.h"
+#include "SMESHGUI_SplitBiQuad.h"
#include "SMESHGUI_SymmetryDlg.h"
#include "SMESHGUI_TranslationDlg.h"
#include "SMESHGUI_TransparencyDlg.h"
-#include "SMESHGUI_DisplayEntitiesDlg.h"
-#include "SMESHGUI_SplitBiQuad.h"
-
-#include "SMESHGUI_FilterUtils.h"
-#include "SMESHGUI_GEOMGenUtils.h"
-#include "SMESHGUI_GroupUtils.h"
-#include "SMESHGUI_HypothesesUtils.h"
-#include "SMESHGUI_MeshUtils.h"
-#include "SMESHGUI_PatternUtils.h"
#include "SMESHGUI_Utils.h"
#include "SMESHGUI_VTKUtils.h"
#include "SMESH_version.h"
-#include "SMESH_ControlsDef.hxx"
#include "SMESH_Actor.h"
#include "SMESH_ActorUtils.h"
#include "SMESH_Client.hxx"
+#include "SMESH_Comment.hxx"
+#include "SMESH_ControlsDef.hxx"
#include "SMESH_ScalarBarActor.h"
#include "SMESH_TypeFilter.hxx"
+#include "SMESH_Component_Generator.hxx"
// SALOME GUI includes
-#include <SalomeApp_Application.h>
-#include <SalomeApp_CheckFileDlg.h>
-#include <SalomeApp_DataObject.h>
-#include <SalomeApp_Study.h>
-#include <SalomeApp_Tools.h>
-
#include <LightApp_DataOwner.h>
#include <LightApp_NameDlg.h>
#include <LightApp_Preferences.h>
#include <LightApp_SelectionMgr.h>
#include <LightApp_UpdateFlags.h>
-
-#include <SVTK_ViewManager.h>
-#include <SVTK_ViewModel.h>
-#include <SVTK_ViewWindow.h>
-
-#include <VTKViewer_Algorithm.h>
-
+#include <QtxFontEdit.h>
+#include <QtxPopupMgr.h>
+#include <QtxInfoPanel.h>
+#include <SALOME_ListIO.hxx>
#include <SUIT_Desktop.h>
#include <SUIT_FileDlg.h>
#include <SUIT_MessageBox.h>
#include <SUIT_OverrideCursor.h>
#include <SUIT_ResourceMgr.h>
#include <SUIT_Session.h>
-
-#include <QtxPopupMgr.h>
-#include <QtxFontEdit.h>
-
-#include <SALOME_ListIO.hxx>
+#include <SVTK_Renderer.h>
+#include <SVTK_ViewManager.h>
+#include <SVTK_ViewModel.h>
+#include <SVTK_ViewWindow.h>
+#include <SalomeApp_Application.h>
+#include <SalomeApp_CheckFileDlg.h>
+#include <SalomeApp_DataObject.h>
+#include <SalomeApp_Study.h>
+#include <SalomeApp_Tools.h>
+#include <VTKViewer_Algorithm.h>
#ifndef DISABLE_PLOT2DVIEWER
#include <SPlot2d_ViewModel.h>
// Qt includes
// #define INCLUDE_MENUITEM_DEF // VSR commented ????????
#include <QApplication>
+#include <QCheckBox>
+#include <QDialogButtonBox>
+#include <QLayout>
+#include <QListView>
#include <QMenu>
#include <QTextStream>
-#include <QListView>
#include <QTreeView>
-#include <QCheckBox>
-#include <QLayout>
-#include <QDialogButtonBox>
// BOOST includes
#include <boost/shared_ptr.hpp>
#include <SALOMEDS_Study.hxx>
#include <SALOMEDS_SObject.hxx>
#include "utilities.h"
+#include <SALOME_LifeCycleCORBA.hxx>
// OCCT includes
#include <Standard_ErrorHandler.hxx>
void ExportMeshToFile(int theCommandID);
- void SetDisplayMode(int theCommandID, SMESHGUI_StudyId2MarkerMap& theMarkerMap);
+ void SetDisplayMode(int theCommandID, VTK::MarkerMap& theMarkerMap);
void SetDisplayEntity(int theCommandID);
}
else if ( theCommandID == SMESHOp::OpImportSAUV ||
theCommandID == SMESHOp::OpPopupImportSAUV ) {
- filter.append( QObject::tr( "SAUV files (*.sauv*)" ) );
- filter.append( QObject::tr( "All files (*)" ) );
+ filter.append( QObject::tr( "SAUV_FILES_FILTER" ) + " (*.sauv *.sauve)" );
+ filter.append( QObject::tr( "ALL_FILES_FILTER" ) + " (*)" );
}
else if ( theCommandID == SMESHOp::OpImportGMF ||
theCommandID == SMESHOp::OpPopupImportGMF ) {
if ( filenames.count() > 0 )
{
SUIT_OverrideCursor wc;
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
+ _PTR(Study) aStudy = SMESH::getStudy();
QStringList errors;
QStringList anEntryList;
QDialogButtonBox* btnbox = msgBox.findChild<QDialogButtonBox*>();
lt->addWidget(&dontShowCheckBox, lt->rowCount(), lt->columnCount()-1, lt->rowCount(), lt->columnCount());
lt->addWidget(btnbox, lt->rowCount(), 0, lt->rowCount(), lt->columnCount());
- if(msgBox.exec() == QMessageBox::Ok)
- {
- if(dontShowCheckBox.checkState() == Qt::Checked)
- {
- if ( resMgr )
- resMgr->setValue( "SMESH", "show_warning", false);
- }
- aCheckWarn = false;
- }
- else
+ if ( msgBox.exec() != QMessageBox::Ok )
return;
+
+ if ( dontShowCheckBox.checkState() == Qt::Checked && resMgr )
+ resMgr->setValue( "SMESH", "show_warning", false);
}
QString aMeshName = anIObject->getName();
}
}
}
-
+
// Warn the user about presence of not supported elements
QString format;
std::vector< SMESH::EntityType > notSupportedElemTypes, presentNotSupported;
// Get parameters of export operation
- QString aFilename;
- SMESH::MED_VERSION aFormat = SMESH::MED_LATEST;
+ QString aFilename;
+ int aFormat =-1; // for MED version used for write
+ bool isOkToWrite = true; // to check MED file version compatibility before adding a mesh in an existing file
+
// Init the parameters with the default values
bool aIsASCII_STL = true;
bool toCreateGroups = false;
toCreateGroups = resMgr->booleanValue( "SMESH", "auto_groups", false );
bool toOverwrite = true;
bool toFindOutDim = true;
+ double zTol = resMgr ? resMgr->doubleValue( "SMESH", "med_ztolerance", 0. ) : 0.;
QString aFilter, aTitle = QObject::tr("SMESH_EXPORT_MESH");
QString anInitialPath = "";
QList< QPair< GEOM::ListOfFields_var, QString > > aFieldList;
- // Get a file name to write in and additional otions
+ // Get a file name to write in and additional options
if ( isUNV || isDAT || isGMF ) // Export w/o options
{
if ( isUNV )
if ( fd->exec() )
aFilename = fd->selectedFile();
- toOverwrite = fv->isOverwrite();
+ toOverwrite = fv->isOverwrite(aFilename);
toCreateGroups = fd->IsChecked(0);
SMESHGUI::resourceMgr()->setValue("SMESH", theByTypeResource, toCreateGroups );
}
else if ( isMED || isSAUV ) // Export to MED or SAUV
{
- QMap<QString, SMESH::MED_VERSION> aFilterMap;
+ int defaultVersion = 0;
+ QMap<QString, int> aFilterMap;
if ( isMED ) {
- QString v22 (aMesh->GetVersionString(SMESH::MED_V2_2, 2));
- aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( v22 ) + " (*.med)", SMESH::MED_V2_2 );
- int minor = v22.split(".").last().toInt();
- int vv= int(SMESH::MED_MINOR_0); // add all minor from 0 to current
- for (int ii=0; ii<minor; ii++)
- {
- QString vs = aMesh->GetVersionString(SMESH::MED_VERSION(vv), 2);
- aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", SMESH::MED_VERSION(vv));
- vv = vv +1;
- }
+ //filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)";
+ //QString vmed (aMesh->GetVersionString(-1, 2));
+ SMESH::long_array_var mvok = aMesh->GetMEDVersionsCompatibleForAppend();
+ if ( mvok->length() > 0)
+ defaultVersion = mvok[0]; // the current version to set the default filter on it
+ for ( CORBA::ULong i = 0; i < mvok->length(); ++i )
+ {
+ QString vs = (char*)( SMESH_Comment( mvok[i]/10 ) << "." << mvok[i]%10 );
+ MESSAGE("MED version: " << vs.toStdString());
+ aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", mvok[i]);
+ }
}
else { // isSAUV
- aFilterMap.insert("All files (*)", SMESH::MED_V2_1 );
- aFilterMap.insert("SAUV files (*.sauv)", SMESH::MED_V2_2 );
- aFilterMap.insert("SAUV files (*.sauve)", SMESH::MED_V2_1 );
+ aFilterMap.insert("All files (*)", -1 );
+ aFilterMap.insert("SAUV files (*.sauv)", defaultVersion ); // 0 = default filter (defaultVersion)
+ aFilterMap.insert("SAUV files (*.sauve)", -1 );
}
-
QStringList filters;
- QString aDefaultFilter;
- QMap<QString, SMESH::MED_VERSION>::const_iterator it = aFilterMap.begin();
+ QMap<QString, int>::const_iterator it = aFilterMap.begin();
+ QString aDefaultFilter = it.key();
for ( ; it != aFilterMap.end(); ++it ) {
filters.push_back( it.key() );
- if (it.value() == SMESH::MED_V2_2)
+ if (it.value() == defaultVersion) // explicit default for MED = current MED version
aDefaultFilter = it.key();
}
QStringList checkBoxes;
if ( fieldSelWdg->GetAllFields( aMeshList, aFieldList ))
wdgList.append( fieldSelWdg );
+ QWidget* zTolWdg = new QWidget();
+ QCheckBox* zTolCheck = new QCheckBox( QObject::tr( "SMESH_ZTOLERANCE" ), zTolWdg );
+ SMESHGUI_SpinBox* zTolSpin = new SMESHGUI_SpinBox( zTolWdg );
+ QHBoxLayout* zTolLayout = new QHBoxLayout( zTolWdg );
+ zTolLayout->addWidget( zTolCheck );
+ zTolLayout->addWidget( zTolSpin );
+ zTolLayout->setMargin( 0 );
+ zTolSpin->RangeStepAndValidator( 0, 1e+100, 1., "length_precision" );
+ zTolSpin->setValue( zTol );
+ QObject::connect( zTolCheck, SIGNAL( toggled(bool)), zTolSpin, SLOT( setEnabled(bool)));
+ zTolCheck->setChecked( resMgr->booleanValue( "SMESH", "enable_ztolerance", false ));
+ zTolSpin ->setEnabled( zTolCheck->isChecked() );
+ wdgList.append( zTolWdg );
+
SalomeApp_CheckFileDlg* fd =
new SalomeApp_CheckFileDlg ( SMESHGUI::desktop(), false, checkBoxes, true, true, wdgList );
fd->setWindowTitle( aTitle );
if ( !anInitialPath.isEmpty() )
fd->setDirectory( anInitialPath );
fd->selectFile(aMeshName);
-
-
+
+
QListView *lview = fd->findChild<QListView*>("listView");
if( lview ) {
lview->setMinimumHeight(200);
fd->setValidator( fv );
bool is_ok = false;
- while (!is_ok) {
+ while (!is_ok)
+ {
+ //MESSAGE("******* Loop on file dialog ***********");
+ isOkToWrite =true;
if ( fd->exec() )
aFilename = fd->selectedFile();
else {
break;
}
aFormat = aFilterMap[fd->selectedNameFilter()];
- toOverwrite = fv->isOverwrite();
+ //MESSAGE("selected version: " << aFormat << " file: " << aFilename.toUtf8().constData());
+ toOverwrite = fv->isOverwrite(aFilename);
+ //MESSAGE("toOverwrite:" << toOverwrite);
is_ok = true;
if ( !aFilename.isEmpty() ) {
- // med-2.1 does not support poly elements
- if ( aFormat==SMESH::MED_V2_1 )
- for( aMeshIter = aMeshList.begin(); aMeshIter != aMeshList.end(); aMeshIter++ ) {
- SMESH::SMESH_IDSource_var aMeshItem = (*aMeshIter).first;
- SMESH::long_array_var nbElems = aMeshItem->GetMeshInfo();
- if ( nbElems[ SMESH::Entity_Polygon ] + nbElems[ SMESH::Entity_Quad_Polygon ] +
- nbElems[ SMESH::Entity_Polyhedra ] + nbElems[ SMESH::Entity_Quad_Polyhedra ])
- {
- int aRet = SUIT_MessageBox::warning(SMESHGUI::desktop(),
- QObject::tr("SMESH_WRN_WARNING"),
- QObject::tr("SMESH_EXPORT_MED_V2_1").arg((*aMeshIter).second),
- QObject::tr("SMESH_BUT_YES"),
- QObject::tr("SMESH_BUT_NO"), 0, 1);
- if (aRet != 0) {
- is_ok = false;
- break;
- }
- }
- }
if( !toOverwrite ) {
- // can't append to an existing using other format
- SMESH::MED_VERSION aVersion = aFormat; //SMESH::MED_V2_1;
- bool isVersionOk = SMESHGUI::GetSMESHGen()->GetMEDVersion( aFilename.toUtf8().constData(), aVersion );
- if( !isVersionOk || aVersion != aFormat ) {
+ // append is only possible if the existing file format is compatible
+ bool isVersionOk = SMESHGUI::GetSMESHGen()->CheckWriteCompatibility( aFilename.toUtf8().constData() );
+ MESSAGE("Append check, isVersionOk:" << isVersionOk);
+ if ( !isVersionOk ) {
int aRet = SUIT_MessageBox::warning(SMESHGUI::desktop(),
QObject::tr("SMESH_WRN_WARNING"),
QObject::tr("SMESH_EXPORT_MED_VERSION_COLLISION").arg(aFilename),
QObject::tr("SMESH_BUT_YES"),
QObject::tr("SMESH_BUT_NO"), 0, 1);
if (aRet == 0)
+ {
toOverwrite = true;
+ //MESSAGE("incompatible MED file version for add, overwrite accepted");
+ }
else
+ {
+ isOkToWrite = false;
is_ok = false;
+ //MESSAGE("incompatible MED file version for add, overwrite refused");
+ }
}
-
QStringList aMeshNamesCollisionList;
SMESH::string_array_var aMeshNames = SMESHGUI::GetSMESHGen()->GetMeshNames( aFilename.toUtf8().constData() );
for( int i = 0, n = aMeshNames->length(); i < n; i++ ) {
}
}
if( !aMeshNamesCollisionList.isEmpty() ) {
+ isOkToWrite = false;
QString aMeshNamesCollisionString = aMeshNamesCollisionList.join( ", " );
int aRet = SUIT_MessageBox::warning(SMESHGUI::desktop(),
QObject::tr("SMESH_WRN_WARNING"),
QObject::tr("SMESH_BUT_YES"),
QObject::tr("SMESH_BUT_NO"),
QObject::tr("SMESH_BUT_CANCEL"), 0, 2);
- if (aRet == 0)
+ MESSAGE("answer collision name " << aRet);
+ if (aRet == 0) {
toOverwrite = true;
+ isOkToWrite = true;
+ }
else if (aRet == 2)
is_ok = false;
}
}
toCreateGroups = fd->IsChecked(0);
toFindOutDim = fd->IsChecked(1);
+ zTol = zTolCheck->isChecked() ? zTolSpin->value() : -1;
fieldSelWdg->GetSelectedFields();
+ if ( resMgr ) resMgr->setValue( "SMESH", "enable_ztolerance", zTolCheck->isChecked() );
+
if ( !fieldSelWdg->parent() )
delete fieldSelWdg;
+ if ( !zTolWdg->parent() )
+ delete zTolWdg;
delete fd;
}
else
try {
// Renumbering is not needed since SMDS redesign in V6.2.0 (Nov 2010)
-// bool Renumber = false;
-// // PAL 14172 : Check of we have to renumber or not from the preferences before export
-// if (resMgr)
-// Renumber= resMgr->booleanValue("renumbering");
-// if (Renumber){
-// SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor();
+ // bool Renumber = false;
+ // // PAL 14172 : Check of we have to renumber or not from the preferences before export
+ // if (resMgr)
+ // Renumber= resMgr->booleanValue("renumbering");
+ // if (Renumber){
+ // SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor();
// aMeshEditor->RenumberNodes();
// aMeshEditor->RenumberElements();
// if ( SMESHGUI::automaticUpdate() )
// SMESH::UpdateView();
// }
- if ( isMED )
+ if ( isMED && isOkToWrite)
{
+ MESSAGE("OK to write MED file "<< aFilename.toUtf8().constData());
aMeshIter = aMeshList.begin();
for( int aMeshIndex = 0; aMeshIter != aMeshList.end(); aMeshIter++, aMeshIndex++ )
{
const GEOM::ListOfFields& fields = aFieldList[ aMeshIndex ].first.in();
const QString& geoAssFields = aFieldList[ aMeshIndex ].second;
const bool hasFields = ( fields.length() || !geoAssFields.isEmpty() );
- if ( !hasFields && aMeshOrGroup->_is_equivalent( aMeshItem ))
- aMeshItem->ExportToMEDX( aFilename.toUtf8().data(), toCreateGroups,
- aFormat, toOverwrite && aMeshIndex == 0, toFindOutDim );
+ if ( !hasFields && aMeshOrGroup->_is_equivalent( aMeshItem ) && zTol < 0 )
+ aMeshItem->ExportMED( aFilename.toUtf8().data(), toCreateGroups, aFormat,
+ toOverwrite && aMeshIndex == 0, toFindOutDim );
else
- aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(), toCreateGroups,
- aFormat, toOverwrite && aMeshIndex == 0, toFindOutDim,
- fields, geoAssFields.toLatin1().data() );
+ aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(),
+ toCreateGroups, aFormat,
+ toOverwrite && aMeshIndex == 0, toFindOutDim,
+ fields, geoAssFields.toLatin1().data(), zTol );
}
}
else if ( isSAUV )
wc.suspend();
SUIT_MessageBox::warning(SMESHGUI::desktop(),
QObject::tr("SMESH_WRN_WARNING"),
- QObject::tr("SMESH_EXPORT_FAILED"));
+ QObject::tr("SMESH_EXPORT_FAILED") + SalomeApp_Tools::ExceptionToString(S_ex));
wc.resume();
}
}
if ( selected.Extent() )
{
Handle(SALOME_InteractiveObject) anIObject = selected.First();
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
+ _PTR(Study) aStudy = SMESH::getStudy();
_PTR(SObject) aSObj = aStudy->FindObjectID(anIObject->getEntry());
if (aSObj) {
if ( aStudy->GetUseCaseBuilder()->SortChildren( aSObj, true/*AscendingOrder*/ ) ) {
}
}
- void SetDisplayMode(int theCommandID, SMESHGUI_StudyId2MarkerMap& theMarkerMap)
+ // Break link with Shaper model
+ void breakShaperLink()
+ {
+ LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
+ SALOME_ListIO selected;
+ if (aSel) {
+ aSel->selectedObjects(selected);
+ if (selected.Extent()) {
+ Handle(SALOME_InteractiveObject) anIObject = selected.First();
+ _PTR(Study) aStudy = SMESH::getStudy();
+ std::string aEntry = anIObject->getEntry();
+ _PTR(SObject) aSObj = aStudy->FindObjectID(aEntry);
+ if (aSObj) {
+ std::string aName = aSObj->GetName();
+ QMessageBox::StandardButton aRes = SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("MSG_BREAK_SHAPER_LINK").arg(aName.c_str()),
+ SUIT_MessageBox::Yes | SUIT_MessageBox::No, SUIT_MessageBox::No);
+ if (aRes == SUIT_MessageBox::Yes) {
+ SUIT_DataOwnerPtrList aList;
+ aSel->selected(aList, "ObjectBrowser", true);
+ SUIT_DataOwner* aOwn = aList.first();
+ LightApp_DataOwner* sowner = dynamic_cast<LightApp_DataOwner*>(aOwn);
+ QString aREntry = sowner->entry();
+
+ static GEOM::GEOM_Gen_var geomGen;
+ if (CORBA::is_nil(geomGen)) {
+ SalomeApp_Application* app = dynamic_cast<SalomeApp_Application*>
+ (SUIT_Session::session()->activeApplication());
+ if (app) {
+ SALOME_LifeCycleCORBA* ls = new SALOME_LifeCycleCORBA(app->namingService());
+ Engines::EngineComponent_var comp =
+ ls->FindOrLoad_Component("FactoryServer", "SHAPERSTUDY");
+ geomGen = GEOM::GEOM_Gen::_narrow(comp);
+ }
+ }
+ if (!CORBA::is_nil(geomGen))
+ {
+ geomGen->BreakLink(aREntry.toStdString().c_str());
+ SMESHGUI::GetSMESHGUI()->updateObjBrowser();
+
+ // remove actors whose objects are removed by BreakLink()
+ QList<SUIT_ViewWindow*> wndList = SMESHGUI::desktop()->windows();
+ SUIT_ViewWindow* wnd;
+ foreach(wnd, wndList)
+ SMESH::UpdateActorsAfterUpdateStudy(wnd);
+ }
+ }
+ }
+ }
+ }
+ }
+
+ //================================================================================
+ /*!
+ * \brief Return true if a mesh icon == ICON_SMESH_TREE_GEOM_MODIF
+ * which means that the mesh can't be modified. It should be either re-computed
+ * or breakShaperLink()'ed. Warn the user about it.
+ */
+ //================================================================================
+
+ bool warnOnGeomModif()
+ {
+ SALOME_ListIO selected;
+ if ( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
+ aSel->selectedObjects(selected,"",/*convertReferences=*/false);
+
+ SALOME_ListIteratorOfListIO It( selected );
+ for ( ; It.More(); It.Next() )
+ {
+ Handle(SALOME_InteractiveObject) io = It.Value();
+ if ( !io->hasEntry() ) continue;
+ _PTR(SObject) so = SMESH::getStudy()->FindObjectID( io->getEntry() );
+ SMESH::SMESH_Mesh_var mesh;
+ while ( mesh->_is_nil() && so && so->GetID() != "0:" )
+ {
+ CORBA::Object_var obj = SMESH::SObjectToObject( so );
+ SMESH::SMESH_IDSource_var isrc = SMESH::SMESH_IDSource::_narrow( obj );
+ if ( isrc->_is_nil() )
+ so = so->GetFather();
+ else
+ mesh = isrc->GetMesh();
+ }
+ if ( mesh->_is_nil() ) continue;
+ so = SMESH::FindSObject( mesh );
+ if ( !so ) continue;
+ _PTR(GenericAttribute) attr;
+ so->FindAttribute( attr, "AttributePixMap" );
+ _PTR(AttributePixMap) pixmap = attr;
+ if ( !pixmap ) continue;
+
+ if ( pixmap->GetPixMap() == "ICON_SMESH_TREE_GEOM_MODIF" )
+ {
+ SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("MSG_WARN_ON_GEOM_MODIF"));
+ return true;
+ }
+ }
+ return false;
+ }
+
+ void SetDisplayMode(int theCommandID, VTK::MarkerMap& theMarkerMap)
{
SALOME_ListIO selected;
SalomeApp_Application* app =
return;
}
- _PTR(Study) aStudy = appStudy->studyDS();
-
aSel->selectedObjects( selected );
if ( selected.Extent() >= 1 )
presentEntities = presentEntities | SMESH_Actor::e0DElements;
if ( !(presentEntities & SMESH_Actor::eBallElem) && anActor->GetObject()->GetNbEntities( SMDSAbs_Ball ) )
presentEntities = presentEntities | SMESH_Actor::eBallElem;
-
+
// as we know that all types of elements are present, we can exit the loop
if ( presentEntities == SMESH_Actor::eAllEntity )
break;
}
- SMESHGUI_PropertiesDlg dlg( theMarkerMap[ aStudy->StudyId() ], SMESHGUI::desktop() );
+ SMESHGUI_PropertiesDlg dlg( theMarkerMap, SMESHGUI::desktop() );
// nodes: color, marker
dlg.setNodeColor( nodeColor );
if( markerType != VTK::MT_USER )
dlg.setShrinkCoef( int( shrinkCoef * 100. ) );
// hide unused controls
dlg.showControls( presentEntities, hasNodes );
-
+
if ( dlg.exec() ) {
nodeColor = dlg.nodeColor();
markerType = dlg.nodeMarkerType();
orientation3d = dlg.orientation3d();
shrinkCoef = dlg.shrinkCoef() / 100.;
- // store point markers map that might be changed by the user
- theMarkerMap[ aStudy->StudyId() ] = dlg.customMarkers();
+ // store point markers that might be changed by the user
+ theMarkerMap = dlg.customMarkers();
// set properties from dialog box to the presentations
SALOME_ListIteratorOfListIO It( selected );
if ( !IObject->hasEntry() ) continue;
SMESH_Actor* anActor = SMESH::FindActorByEntry( IObject->getEntry() );
if ( !anActor ) continue;
-
+
// nodes: color, marker
anActor->SetNodeColor( nodeColor.redF(), nodeColor.greenF(), nodeColor.blueF() );
if ( markerType != VTK::MT_USER ) {
anActor->SetMarkerStd( markerType, markerScale );
}
else {
- const VTK::MarkerMap& markerMap = theMarkerMap[ aStudy->StudyId() ];
- VTK::MarkerMap::const_iterator iter = markerMap.find( markerId );
- if ( iter != markerMap.end() )
+ VTK::MarkerMap::const_iterator iter = theMarkerMap.find( markerId );
+ if ( iter != theMarkerMap.end() )
anActor->SetMarkerTexture( markerId, iter->second.second );
}
// volumes: normal color, reversed color (delta)
aColor = nodeColor; break;
case SMESH::EDGE:
aColor = edgeColor; break;
- case SMESH::FACE:
+ case SMESH::FACE:
aColor = faceColor; break;
case SMESH::VOLUME:
aColor = volumeColor; break;
- case SMESH::ELEM0D:
+ case SMESH::ELEM0D:
aColor = elem0dColor; break;
- case SMESH::BALL:
+ case SMESH::BALL:
aColor = ballColor; break;
default: break;
}
-
+
if ( aColor.isValid() ) {
SALOMEDS::Color aGroupColor;
aGroupColor.R = aColor.redF();
void Control( int theCommandID )
{
SMESH_Actor::eControl aControl = SMESH_Actor::eControl( ActionToControl( theCommandID ));
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
+ _PTR(Study) aStudy = SMESH::getStudy();
SALOME_ListIO selected;
if ( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
if ( !anIDSrc->_is_nil() ) {
SMESH_Actor *anActor = SMESH::FindActorByEntry( anIO->getEntry());
if (( !anActor && selected.Extent() == 1 ) &&
- ( anActor = SMESH::CreateActor( aStudy, anIO->getEntry() )))
+ ( anActor = SMESH::CreateActor( anIO->getEntry() )))
{
anActor->SetControlMode( aControl );
SMESH::DisplayActor( SMESH::GetCurrentVtkView(), anActor );
int anEntitiesCount = anActor->GetNumberControlEntities();
if (anEntitiesCount >= 0)
functorName = functorName + ": " + QString::number(anEntitiesCount);
- anActor->GetScalarBarActor()->SetTitle( functorName.toLatin1().constData() );
+ anActor->GetScalarBarActor()->SetTitle( functorName.toUtf8().constData() );
SMESH::RepaintCurrentView();
#ifndef DISABLE_PLOT2DVIEWER
if ( anActor->GetPlot2Histogram() ) {
QString CheckTypeObject(const Handle(SALOME_InteractiveObject) & theIO)
{
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
+ _PTR(Study) aStudy = SMESH::getStudy();
_PTR(SObject) aSObj = aStudy->FindObjectID(theIO->getEntry());
if (aSObj) {
_PTR(SComponent) aSComp = aSObj->GetFatherComponent();
v = qMax( uint(0), qMin ( v, size-1 ) );
return v;
}
-
+
} //namespace
void SMESHGUI::OnEditDelete()
LightApp_SelectionMgr* aSel = SMESHGUI::selectionMgr();
SALOME_ListIO selected; aSel->selectedObjects( selected, QString::null, false );
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
+ _PTR(Study) aStudy = SMESH::getStudy();
_PTR(StudyBuilder) aStudyBuilder = aStudy->NewBuilder();
_PTR(GenericAttribute) anAttr;
_PTR(AttributeIOR) anIOR;
+ const int objectCountLimit = 30; // PAL23599
int objectCount = 0;
QString aNameList;
QString aParentComponent = QString::null;
-
+
for( SALOME_ListIteratorOfListIO anIt( selected ); anIt.More(); anIt.Next() )
{
Handle(SALOME_InteractiveObject) anIO = anIt.Value();
if ( anIO.IsNull() ) continue;
-
- QString father = "unknown";
+
+ QString father = "unknown", name;
_PTR(SObject) aSO = aStudy->FindObjectID( anIO->getEntry() );
if (aSO) {
father = QString::fromStdString( aSO->GetFatherComponent()->ComponentDataType() );
// check if object is reference
_PTR(SObject) aRefSObj;
- aNameList.append("\n - ");
if ( aSO->ReferencedObject( aRefSObj ) ) {
- QString aRefName = QString::fromStdString ( aRefSObj->GetName() );
- aNameList.append( aRefName );
+ name = QString::fromStdString ( aRefSObj->GetName() );
father = QString::fromStdString ( aRefSObj->GetFatherComponent()->ComponentDataType() );
}
else
- aNameList.append(anIO->getName());
+ name = anIO->getName();
objectCount++;
}
+ if ( objectCount < objectCountLimit ) { // avoid occupying the whole screen
+ aNameList.append("\n - ");
+ aNameList.append( name );
+ }
if( aParentComponent.isNull() )
aParentComponent = father;
else if( !aParentComponent.isEmpty() && aParentComponent!=father )
aParentComponent = "";
}
+ if ( objectCount >= objectCountLimit )
+ aNameList.append("\n - ...");
if ( objectCount == 0 )
return; // No Valid Objects Selected
SalomeApp_Application* anApp = dynamic_cast<SalomeApp_Application*>( SUIT_Session::session()->activeApplication() );
- // Put the whole hierarchy of sub-objects of the selected SO's into a list and
- // then treat them all starting from the deepest objects (at list back)
+ // Put one level of sub-objects of the selected SO's into a list
+ // in order to get objects inside folders like "Assigned Algorithms"
std::list< _PTR(SObject) > listSO;
SALOME_ListIteratorOfListIO It(selected);
for( ; It.More(); It.Next()) // loop on selected IO's
aSO = aRefSObject; // Delete main Object instead of reference
listSO.push_back( aSO );
- std::list< _PTR(SObject) >::iterator itSO = --listSO.end();
- for ( ; itSO != listSO.end(); ++itSO ) {
- _PTR(ChildIterator) it = aStudy->NewChildIterator( *itSO );
- for (it->InitEx(false); it->More(); it->Next())
- listSO.push_back( it->Value() );
- }
+
+ _PTR(ChildIterator) it = aStudy->NewChildIterator( aSO );
+ for (it->InitEx(false); it->More(); it->Next())
+ listSO.push_back( it->Value() );
}
}
// Check if none of objects to delete is referred from outside
std::list< _PTR(SObject) >::reverse_iterator ritSO;
+ std::vector< _PTR(SObject) > subSO;
for ( ritSO = listSO.rbegin(); ritSO != listSO.rend(); ++ritSO )
{
_PTR(SObject) SO = *ritSO;
if ( !SO ) continue;
- std::vector<_PTR(SObject)> aReferences = aStudy->FindDependances( *ritSO );
- for (size_t i = 0; i < aReferences.size(); i++) {
- _PTR(SComponent) aComponent = aReferences[i]->GetFatherComponent();
- std::string type = aComponent->ComponentDataType();
- if ( type != "SMESH" )
- {
- SUIT_MessageBox::warning( anApp->desktop(),
- QObject::tr("WRN_WARNING"),
- QObject::tr("DEP_OBJECT") );
- return; // outside SMESH, there is an object depending on a SMESH object
+
+ int nbChildren = SO->GetLastChildTag();
+ subSO.clear();
+ subSO.reserve( 1 + nbChildren );
+ subSO.push_back( SO );
+ if ( nbChildren > 0 )
+ {
+ _PTR(ChildIterator) it = aStudy->NewChildIterator( SO );
+ for ( it->InitEx( true ); it->More(); it->Next() )
+ subSO.push_back( it->Value() );
+ }
+ for ( size_t i = 0; i < subSO.size(); ++i )
+ {
+ std::vector<_PTR(SObject)> aReferences = aStudy->FindDependances( subSO[i] );
+ for ( size_t j = 0; j < aReferences.size(); j++ ) {
+ _PTR(SComponent) aComponent = aReferences[j]->GetFatherComponent();
+ std::string type = aComponent->ComponentDataType();
+ if ( type != "SMESH" )
+ {
+ SUIT_MessageBox::warning( anApp->desktop(),
+ QObject::tr("WRN_WARNING"),
+ QObject::tr("DEP_OBJECT") );
+ return; // outside SMESH, there is an object depending on a SMESH object
+ }
}
}
}
- // Call mesh->Clear() to prevent loading mesh from file caused by hypotheses removal
- for( It.Initialize( selected ); It.More(); It.Next()) // loop on selected IO's
- {
- Handle(SALOME_InteractiveObject) IObject = It.Value();
- SMESH::SMESH_Mesh_var mesh = SMESH::IObjectToInterface< SMESH::SMESH_Mesh >( IObject );
- if ( !mesh->_is_nil() )
- mesh->Clear();
- }
-
// Treat SO's in the list starting from the back
aStudyBuilder->NewCommand(); // There is a transaction
for ( ritSO = listSO.rbegin(); ritSO != listSO.rend(); ++ritSO )
std::string anEntry = SO->GetID();
/** Erase graphical object and remove all its data **/
- if(SO->FindAttribute(anAttr, "AttributeIOR")) {
+ if ( SO->FindAttribute( anAttr, "AttributeIOR" )) {
SMESH::RemoveVisualObjectWithActors( anEntry.c_str(), true);
}
/** Remove an object from data structures **/
else if ( !aSubMesh->_is_nil() ) { // DELETE SUBMESH
SMESH::SMESH_Mesh_var aMesh = aSubMesh->GetFather();
aMesh->RemoveSubMesh( aSubMesh );
-
- _PTR(SObject) aMeshSO = SMESH::FindSObject(aMesh);
- if (aMeshSO)
- SMESH::ModifiedMesh(aMeshSO, false, aMesh->NbNodes()==0);
}
else {
Handle(SALOME_InteractiveObject) IObject = new SALOME_InteractiveObject
*
*/
//=============================================================================
-SMESHGUI::SMESHGUI() :
-SalomeApp_Module( "SMESH" )
+SMESHGUI::SMESHGUI() : SalomeApp_Module( "SMESH" )
{
if ( CORBA::is_nil( myComponentSMESH ) )
{
CORBA::Boolean anIsEmbeddedMode;
- myComponentSMESH = SMESH_Client::GetSMESHGen(getApp()->orb(),anIsEmbeddedMode);
+ SALOME_NamingService_Abstract *ns = SalomeApp_Application::namingService();
+ if( dynamic_cast<SALOME_NamingService *>(ns) )
+ myComponentSMESH = SMESH_Client::GetSMESHGen(getApp()->orb(),anIsEmbeddedMode);
+ else
+ {
+ Engines::EngineComponent_var comp = RetrieveSMESHInstance();
+ myComponentSMESH = SMESH::SMESH_Gen::_narrow(comp);
+ }
+
//MESSAGE("-------------------------------> anIsEmbeddedMode=" << anIsEmbeddedMode);
// 0019923: EDF 765 SMESH : default values of hypothesis
SMESH::long_array_var info = theMesh->GetMeshInfo();
long nbOdElems = info[SMDSEntity_0D];
long nbEdges = info[SMDSEntity_Edge] + info[SMDSEntity_Quad_Edge];
- long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] +
- info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] +
+ long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] +
+ info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] +
info[SMDSEntity_Polygon] + info[SMDSEntity_Quad_Polygon];
- long nbVolumes = info[SMDSEntity_Tetra] + info[SMDSEntity_Quad_Tetra] +
- info[SMDSEntity_Hexa] + info[SMDSEntity_Quad_Hexa] + info[SMDSEntity_TriQuad_Hexa] +
- info[SMDSEntity_Pyramid] + info[SMDSEntity_Quad_Pyramid] +
+ long nbVolumes = info[SMDSEntity_Tetra] + info[SMDSEntity_Quad_Tetra] +
+ info[SMDSEntity_Hexa] + info[SMDSEntity_Quad_Hexa] + info[SMDSEntity_TriQuad_Hexa] +
+ info[SMDSEntity_Pyramid] + info[SMDSEntity_Quad_Pyramid] +
info[SMDSEntity_Penta] + info[SMDSEntity_Quad_Penta] + info[SMDSEntity_BiQuad_Penta] +
- info[SMDSEntity_Polyhedra] +
+ info[SMDSEntity_Polyhedra] +
info[SMDSEntity_Hexagonal_Prism];
long nbBalls = info[SMDSEntity_Ball];
long requestedSize = nbOdElems + nbBalls + nbEdges + nbFaces + nbVolumes;
*nbElements = requestedSize;
-
+
*entities = SMESH_Actor::eAllEntity;
*hidden = 0;
smeshMod = dynamic_cast<SMESHGUI*>( module );
}
- if ( smeshMod && smeshMod->application() && smeshMod->application()->activeStudy() )
- {
- SalomeApp_Study* study = dynamic_cast<SalomeApp_Study*>( smeshMod->application()->activeStudy() );
- if ( study )
- {
- _PTR(Study) aStudy = study->studyDS();
- if ( aStudy )
- GetSMESHGen()->SetCurrentStudy( _CAST(Study,aStudy)->GetStudy() );
- }
- }
-
return smeshMod;
}
return true;
}
-//=============================================================================
/*!
- *
- */
-//=============================================================================
-static int isStudyLocked(_PTR(Study) theStudy){
- return theStudy->GetProperties()->IsLocked();
-}
-
-static bool checkLock(_PTR(Study) theStudy) {
- if (isStudyLocked(theStudy)) {
- SUIT_MessageBox::warning( SMESHGUI::desktop(),
- QObject::tr("WRN_WARNING"),
- QObject::tr("WRN_STUDY_LOCKED") );
+ * \brief Verifies whether study of operation is locked
+ * \param theMess - specifies whether message box must be shown if study is locked
+ * \return State of study.
+*
+* Verifies whether study of operation is locked. If second parameter is TRUE and study
+* is locked when corresponding message box appears
+*/
+bool SMESHGUI::isStudyLocked( bool theMessage )
+{
+ if ( SMESH::getStudy()->GetProperties()->IsLocked() )
+ {
+ if ( theMessage )
+ SUIT_MessageBox::warning( SMESHGUI::desktop(),
+ QObject::tr( "WRN_WARNING" ),
+ QObject::tr( "WRN_STUDY_LOCKED" ) );
return true;
}
return false;
}
-//=======================================================================
-//function : CheckActiveStudyLocked
-//purpose :
-//=======================================================================
-
-bool SMESHGUI::isActiveStudyLocked()
-{
- _PTR(Study) aStudy = activeStudy()->studyDS();
- return checkLock( aStudy );
-}
-
//=============================================================================
/*!
*
if( !anApp )
return false;
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument(); //Document OCAF de l'etude active
SUIT_ResourceMgr* mgr = resourceMgr();
if( !mgr )
return false;
- if (CORBA::is_nil(GetSMESHGen()->GetCurrentStudy())) {
- GetSMESHGen()->SetCurrentStudy(_CAST(Study,aStudy)->GetStudy());
- }
-
SUIT_ViewWindow* view = application()->desktop()->activeWindow();
SVTK_ViewWindow* vtkwnd = dynamic_cast<SVTK_ViewWindow*>( view );
switch (theCommandID) {
case SMESHOp::OpDelete:
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
OnEditDelete();
break;
case SMESHOp::OpImportDAT:
case SMESHOp::OpPopupImportSAUV:
case SMESHOp::OpPopupImportGMF:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
::ImportMeshesFromFile(GetSMESHGen(),theCommandID);
break;
}
#ifndef DISABLE_PLOT2DVIEWER
SMESH::ProcessIn2DViewers(anActor,SMESH::RemoveFrom2dViewer);
#endif
+ anActor->UpdateFilter();
}
}
}
case SMESHOp::OpUpdate:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
SUIT_OverrideCursor wc;
try {
OCC_CATCH_SIGNALS;
SMESH::UpdateView();
}
- catch (std::bad_alloc) { // PAL16774 (Crash after display of many groups)
+ catch (std::bad_alloc&) { // PAL16774 (Crash after display of many groups)
SMESH::OnVisuException();
}
catch (...) { // PAL16774 (Crash after display of many groups)
}
// PAL13338 + PAL15161 -->
- if ( ( theCommandID==SMESHOp::OpShow || theCommandID==SMESHOp::OpShowOnly ) && !checkLock(aStudy)) {
+ if ( ( theCommandID==SMESHOp::OpShow || theCommandID==SMESHOp::OpShowOnly ) && !isStudyLocked()) {
SMESH::UpdateView();
SMESHGUI::GetSMESHGUI()->EmitSignalVisibilityChanged();
}
else
aSel->setSelectedObjects( to_process );
+ if ( vtkwnd && vtkwnd->GetRenderer() && !isStudyLocked() &&
+ ( theCommandID==SMESHOp::OpShow || theCommandID==SMESHOp::OpShowOnly ) )
+ vtkwnd->GetRenderer()->AdjustActors();
+
break;
}
case SMESHOp::OpNode:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
break;
}
- case SMESHOp::OpCreateMesh:
- case SMESHOp::OpCreateSubMesh:
case SMESHOp::OpEditMeshOrSubMesh:
case SMESHOp::OpEditMesh:
case SMESHOp::OpEditSubMesh:
+ case SMESHOp::OpMeshOrder:
+ case SMESHOp::OpCreateSubMesh:
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+ // fall through
+ case SMESHOp::OpCreateMesh:
case SMESHOp::OpCompute:
case SMESHOp::OpComputeSubMesh:
case SMESHOp::OpPreCompute:
case SMESHOp::OpEvaluate:
- case SMESHOp::OpMeshOrder:
+ case SMESHOp::OpShowErrors:
startOperation( theCommandID );
break;
+ case SMESHOp::OpRecompute:
+ {
+ if ( isStudyLocked() )
+ break;
+ SALOME_ListIO selected;
+ if ( LightApp_SelectionMgr *sel = selectionMgr() )
+ sel->selectedObjects( selected );
+ if ( selected.Extent() == 1 ) {
+ SMESH::SMESH_Mesh_var aMesh = SMESH::GetMeshByIO( selected.First() );
+ if ( !aMesh->_is_nil() )
+ aMesh->Clear();
+ startOperation( SMESHOp::OpCompute );
+ }
+ }
+ break;
case SMESHOp::OpCopyMesh:
{
- if (checkLock(aStudy)) break;
+ if (isStudyLocked()) break;
EmitSignalDeactivateDialog();
( new SMESHGUI_CopyMeshDlg( this ) )->show();
}
break;
case SMESHOp::OpBuildCompoundMesh:
{
- if (checkLock(aStudy)) break;
+ if (isStudyLocked()) break;
EmitSignalDeactivateDialog();
( new SMESHGUI_BuildCompoundDlg( this ) )->show();
}
break;
}
- if ( checkLock( aStudy ) )
+ if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
/*Standard_Boolean aRes;
SMESH::SMESH_Mesh_var aMesh = SMESH::IObjectToInterface<SMESH::SMESH_Mesh>(IObject);
break;
}
- if ( checkLock( aStudy ) )
+ if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
SMESHGUI_MultiEditDlg* aDlg = NULL;
}
case SMESHOp::OpSmoothing:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_SmoothingDlg( this ) )->show();
}
case SMESHOp::OpExtrusion:
{
- if (checkLock(aStudy)) break;
+ if (isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if (vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_ExtrusionDlg ( this ) )->show();
}
case SMESHOp::OpExtrusionAlongAPath:
{
- if (checkLock(aStudy)) break;
+ if (isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if (vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_ExtrusionAlongPathDlg( this ) )->show();
}
case SMESHOp::OpRevolution:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RevolutionDlg( this ) )->show();
}
case SMESHOp::OpPatternMapping:
{
- if ( checkLock( aStudy ) )
+ if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd )
{
EmitSignalDeactivateDialog();
}
break;
}
+ // Adaptation - begin
+ case SMESHOp::OpMGAdapt:
+ {
+ SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil();
+ SMESHGUI_AdaptDlg *objet = new SMESHGUI_AdaptDlg( this, theCommandID, aMesh);
+ }
+ // Adaptation - end
case SMESHOp::OpSplitBiQuadratic:
case SMESHOp::OpConvertMeshToQuadratic:
case SMESHOp::OpCreateBoundaryElements: // create 2D mesh from 3D
case SMESHOp::OpReorientFaces:
case SMESHOp::OpCreateGeometryGroup:
{
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
startOperation( theCommandID );
break;
}
break;
}
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil();
break;
}
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
// check if submesh is selected
Handle(SALOME_InteractiveObject) IObject = selected.First();
if (IObject->hasEntry()) {
- _PTR(SObject) aSObj = aStudy->FindObjectID(IObject->getEntry());
+ _PTR(SObject) aSObj = SMESH::getStudy()->FindObjectID(IObject->getEntry());
if( aSObj ) {
SMESH::SMESH_subMesh_var aSubMesh = SMESH::SMESH_subMesh::_narrow( SMESH::SObjectToObject( aSObj ) );
if (!aSubMesh->_is_nil()) {
break;
}
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
case SMESHOp::OpAddElemGroupPopup: // Add elements to group
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
if (myState == 800) {
SMESHGUI_GroupDlg *aDlg = (SMESHGUI_GroupDlg*) myActiveDialogBox;
if (aDlg) aDlg->onAdd();
case SMESHOp::OpRemoveElemGroupPopup: // Remove elements from group
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
if (myState == 800) {
SMESHGUI_GroupDlg *aDlg = (SMESHGUI_GroupDlg*) myActiveDialogBox;
if (aDlg) aDlg->onRemove();
break;
}
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
EmitSignalDeactivateDialog();
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
break;
}
- if ( checkLock( aStudy ) )
+ if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
case SMESHOp::OpGroupUnderlyingElem: // Create groups of entities from existing groups of superior dimensions
{
- if ( checkLock( aStudy ) )
+ if ( isStudyLocked() )
break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
EmitSignalDeactivateDialog();
SMESHGUI_GroupOpDlg* aDlg = new SMESHGUI_DimGroupDlg( this );
break;
}
+ case SMESHOp::OpFaceGroupsByEdges: // Create face groups separated by sharp edges
+ {
+ if ( isStudyLocked() )
+ break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
+
+ EmitSignalDeactivateDialog();
+ SMESHGUI_FaceGroupsSeparatedByEdgesDlg* aDlg = new SMESHGUI_FaceGroupsSeparatedByEdgesDlg( this );
+ aDlg->show();
+
+ break;
+ }
+
case SMESHOp::OpDeleteGroup: // Delete groups with their contents
{
if ( !vtkwnd )
break;
}
- if ( checkLock( aStudy ) )
+ if ( isStudyLocked() )
break;
EmitSignalDeactivateDialog();
SALOME_ListIteratorOfListIO It( selected );
for ( ; It.More(); It.Next() ) {
SMESHGUI_MeshInfoDlg* dlg = new SMESHGUI_MeshInfoDlg( SMESHGUI::desktop(), page );
- dlg->showInfo( It.Value() );
+ dlg->showInfo( It.Value() );
dlg->show();
}
}
case SMESHOp::OpEditHypothesis:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
SALOME_ListIO selected;
}
case SMESHOp::OpUnassign: // REMOVE HYPOTHESIS / ALGORITHMS
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
SUIT_OverrideCursor wc;
LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
case SMESHOp::OpPyramid:
case SMESHOp::OpHexagonalPrism:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
SMDSAbs_EntityType type = SMDSEntity_Edge;
}
case SMESHOp::OpPolyhedron:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_CreatePolyhedralVolumeDlg( this ) )->show();
case SMESHOp::OpQuadraticHexahedron:
case SMESHOp::OpTriQuadraticHexahedron:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
SMDSAbs_EntityType type = SMDSEntity_Last;
}
case SMESHOp::OpRemoveNodes:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RemoveNodesDlg( this ) )->show();
}
case SMESHOp::OpRemoveElements: // REMOVES ELEMENTS
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RemoveElementsDlg( this ) )->show();
}
case SMESHOp::OpClearMesh: {
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
SALOME_ListIO selected;
if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
if ( aMesh->NbNodes() == 0 ) // imported mesh is not empty
SMESH::RemoveVisualObjectWithActors(IOS->getEntry(), true);
_PTR(SObject) aMeshSObj = SMESH::FindSObject(aMesh);
- SMESH::ModifiedMesh( aMeshSObj, false, true);
// hide groups and submeshes
_PTR(ChildIterator) anIter =
- SMESH::GetActiveStudyDocument()->NewChildIterator( aMeshSObj );
+ SMESH::getStudy()->NewChildIterator( aMeshSObj );
for ( anIter->InitEx(true); anIter->More(); anIter->Next() )
{
_PTR(SObject) so = anIter->Value();
}
case SMESHOp::OpRemoveOrphanNodes:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
SALOME_ListIO selected;
if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
aSel->selectedObjects( selected );
}
case SMESHOp::OpRenumberingNodes:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RenumberingDlg( this, 0 ) )->show();
}
case SMESHOp::OpRenumberingElements:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RenumberingDlg( this, 1 ) )->show();
}
case SMESHOp::OpTranslation:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_TranslationDlg( this ) )->show();
}
case SMESHOp::OpRotation:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_RotationDlg( this ) )->show();
}
case SMESHOp::OpSymmetry:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if(vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_SymmetryDlg( this ) )->show();
}
case SMESHOp::OpScale:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_ScaleDlg( this ) )->show();
case SMESHOp::OpOffset:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_OffsetDlg( this ) )->show();
case SMESHOp::OpSewing:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if(vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_SewingDlg( this ) )->show();
}
case SMESHOp::OpMergeNodes:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if(vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_MergeDlg( this, 0 ) )->show();
}
case SMESHOp::OpMergeElements:
{
- if (checkLock(aStudy)) break;
+ if (isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if (vtkwnd) {
EmitSignalDeactivateDialog();
( new SMESHGUI_MergeDlg( this, 1 ) )->show();
}
case SMESHOp::OpMoveNode: // MAKE MESH PASS THROUGH POINT
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
startOperation( SMESHOp::OpMoveNode );
break;
case SMESHOp::OpDuplicateNodes:
{
- if(checkLock(aStudy)) break;
+ if(isStudyLocked()) break;
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
if ( vtkwnd ) {
EmitSignalDeactivateDialog();
( new SMESHGUI_DuplicateNodesDlg( this ) )->show();
}
case SMESHOp::OpElem0DOnElemNodes: // 0D_ON_ALL_NODES
+ if ( warnOnGeomModif() )
+ break; // action forbidden as geometry modified
startOperation( SMESHOp::OpElem0DOnElemNodes );
break;
case SMESHOp::OpPropertiesVolume:
case SMESHOp::OpMinimumDistance:
case SMESHOp::OpBoundingBox:
+ case SMESHOp::OpAngle:
{
int page = SMESHGUI_MeasureDlg::MinDistance;
if ( theCommandID == SMESHOp::OpBoundingBox )
page = SMESHGUI_MeasureDlg::Area;
else if ( theCommandID == SMESHOp::OpPropertiesVolume )
page = SMESHGUI_MeasureDlg::Volume;
+ else if ( theCommandID == SMESHOp::OpAngle )
+ page = SMESHGUI_MeasureDlg::Angle;
EmitSignalDeactivateDialog();
SMESHGUI_MeasureDlg* dlg = new SMESHGUI_MeasureDlg( SMESHGUI::desktop(), page );
case SMESHOp::OpSortChild:
::sortChildren();
break;
+ case SMESHOp::OpBreakLink:
+ ::breakShaperLink();
+ break;
}
*
*/
//=============================================================================
-bool SMESHGUI::OnMousePress( QMouseEvent * pe, SUIT_ViewWindow * wnd )
+bool SMESHGUI::OnMousePress( QMouseEvent * /*pe*/, SUIT_ViewWindow * /*wnd*/ )
{
return false;
}
*
*/
//=============================================================================
-bool SMESHGUI::OnMouseMove( QMouseEvent * pe, SUIT_ViewWindow * wnd )
+bool SMESHGUI::OnMouseMove( QMouseEvent * /*pe*/, SUIT_ViewWindow * /*wnd*/ )
{
return true;
}
*
*/
//=============================================================================
-bool SMESHGUI::OnKeyPress( QKeyEvent * pe, SUIT_ViewWindow * wnd )
+bool SMESHGUI::OnKeyPress( QKeyEvent * /*pe*/, SUIT_ViewWindow * /*wnd*/ )
{
return true;
}
if ( !icon_id.isEmpty() )
pix = resMgr->loadPixmap( "SMESH", tr( icon_id.toLatin1().data() ) );
else
- pix = resMgr->loadPixmap( "SMESH", tr( QString( "ICO_%1" ).arg( po_id ).toLatin1().data() ), false );
+ pix = resMgr->loadPixmap( "SMESH", tr( QString( "ICON_%1" ).arg( po_id ).toLatin1().data() ), false );
if ( !pix.isNull() )
icon = QIcon( pix );
popupMgr()->insert( action( id ), pId, 0 );
QString lc = "$"; // VSR : instead of QtxPopupSelection::defEquality();
- QString dc = "selcount"; // VSR : insetad of QtxPopupSelection::defSelCountParam()
+ QString dc = "selcount"; // VSR : instead of QtxPopupSelection::defSelCountParam()
QString rule = "(%1) and (%2) and (%3)";
rule = rule.arg( QString( "%1>0" ).arg( dc ) );
if( clients.isEmpty() )
createSMESHAction( SMESHOp::OpCopyMesh, "COPY_MESH", "ICON_COPY_MESH" );
createSMESHAction( SMESHOp::OpCompute, "COMPUTE", "ICON_COMPUTE" );
createSMESHAction( SMESHOp::OpComputeSubMesh, "COMPUTE_SUBMESH", "ICON_COMPUTE" );
+ createSMESHAction( SMESHOp::OpRecompute, "RE_COMPUTE", "ICON_COMPUTE" );
createSMESHAction( SMESHOp::OpPreCompute, "PRECOMPUTE", "ICON_PRECOMPUTE" );
+ createSMESHAction( SMESHOp::OpShowErrors, "SHOW_ERRORS", "ICON_SHOW_ERRORS" );
createSMESHAction( SMESHOp::OpEvaluate, "EVALUATE", "ICON_EVALUATE" );
createSMESHAction( SMESHOp::OpMeshOrder, "MESH_ORDER", "ICON_MESH_ORDER");
createSMESHAction( SMESHOp::OpCreateGroup, "CREATE_GROUP", "ICON_CREATE_GROUP" );
createSMESHAction( SMESHOp::OpIntersectGroups, "INT_GROUP", "ICON_INTERSECT" );
createSMESHAction( SMESHOp::OpCutGroups, "CUT_GROUP", "ICON_CUT" );
createSMESHAction( SMESHOp::OpGroupUnderlyingElem, "UNDERLYING_ELEMS", "ICON_UNDERLYING_ELEMS" );
+ createSMESHAction( SMESHOp::OpFaceGroupsByEdges, "FACE_GROUPS_BY_EDGES", "ICON_FACE_GROUPS_BY_EDGES" );
createSMESHAction( SMESHOp::OpAddElemGroupPopup, "ADD_TO_GROUP" );
createSMESHAction( SMESHOp::OpRemoveElemGroupPopup, "REMOVE_FROM_GROUP" );
createSMESHAction( SMESHOp::OpDeleteGroup, "DEL_GROUP", "ICON_DEL_GROUP" );
createSMESHAction( SMESHOp::OpAutoColor, "AUTO_COLOR" );
createSMESHAction( SMESHOp::OpDisableAutoColor, "DISABLE_AUTO_COLOR" );
+ // Adaptation - begin
+ createSMESHAction( SMESHOp::OpMGAdapt, "MG_ADAPT", "ICON_MG_ADAPT" );
+ // Adaptation - end
+
createSMESHAction( SMESHOp::OpMinimumDistance, "MEASURE_MIN_DIST", "ICON_MEASURE_MIN_DIST" );
createSMESHAction( SMESHOp::OpBoundingBox, "MEASURE_BND_BOX", "ICON_MEASURE_BND_BOX" );
createSMESHAction( SMESHOp::OpPropertiesLength, "MEASURE_LENGTH", "ICON_MEASURE_LENGTH" );
createSMESHAction( SMESHOp::OpPropertiesArea, "MEASURE_AREA", "ICON_MEASURE_AREA" );
createSMESHAction( SMESHOp::OpPropertiesVolume, "MEASURE_VOLUME", "ICON_MEASURE_VOLUME" );
+ createSMESHAction( SMESHOp::OpAngle, "MEASURE_ANGLE", "ICON_MEASURE_ANGLE" );
createSMESHAction( SMESHOp::OpHide, "HIDE", "ICON_HIDE" );
createSMESHAction( SMESHOp::OpShow, "SHOW", "ICON_SHOW" );
createSMESHAction( SMESHOp::OpSortChild, "SORT_CHILD_ITEMS" );
+ createSMESHAction( SMESHOp::OpBreakLink, "BREAK_SHAPER_LINK" );
+
QList<int> aCtrlActions;
aCtrlActions << SMESHOp::OpFreeNode << SMESHOp::OpEqualNode
<< SMESHOp::OpNodeConnectivityNb // node controls
meshId = createMenu( tr( "MEN_MESH" ), -1, 70, 10 ),
ctrlId = createMenu( tr( "MEN_CTRL" ), -1, 60, 10 ),
modifyId = createMenu( tr( "MEN_MODIFY" ), -1, 40, 10 ),
+ adaptId = createMenu( tr( "MEN_ADAPT" ), -1, 80, 10 ),
measureId = createMenu( tr( "MEN_MEASURE" ), -1, 50, 10 ),
viewId = createMenu( tr( "MEN_VIEW" ), -1, 2 );
createMenu( SMESHOp::OpCutGroups, meshId, -1 );
createMenu( separator(), meshId, -1 );
createMenu( SMESHOp::OpGroupUnderlyingElem, meshId, -1 );
+ createMenu( SMESHOp::OpFaceGroupsByEdges, meshId, -1 );
createMenu( separator(), meshId, -1 );
createMenu( SMESHOp::OpMeshInformation, meshId, -1 );
//createMenu( SMESHOp::OpStdInfo, meshId, -1 );
createMenu( SMESHOp::OpSmoothing, modifyId, -1 );
createMenu( SMESHOp::OpPatternMapping, modifyId, -1 );
+ // Adaptation - begin
+ createMenu( SMESHOp::OpMGAdapt, adaptId, -1 );
+ // Adaptation - end
+
createMenu( SMESHOp::OpMinimumDistance, measureId, -1 );
createMenu( SMESHOp::OpBoundingBox, measureId, -1 );
+ createMenu( SMESHOp::OpAngle, measureId, -1 );
createMenu( SMESHOp::OpPropertiesLength, basicPropId, -1 );
createMenu( SMESHOp::OpPropertiesArea, basicPropId, -1 );
createMenu( SMESHOp::OpPropertiesVolume, basicPropId, -1 );
connect( volumeMenu, SIGNAL( aboutToShow() ), this, SLOT( onUpdateControlActions() ) );
// ----- create toolbars --------------
- int meshTb = createTool( tr( "TB_MESH" ), QString( "SMESHMeshToolbar" ) ),
- info = createTool( tr( "TB_INFO" ), QString( "SMESHInformationToolbar" ) ),
- groupTb = createTool( tr( "TB_GROUP" ), QString( "SMESHGroupToolbar" ) ),
- ctrl0dTb = createTool( tr( "TB_CTRL0D" ), QString( "SMESHNodeControlsToolbar" ) ),
- ctrl1dTb = createTool( tr( "TB_CTRL1D" ), QString( "SMESHEdgeControlsToolbar" ) ),
- ctrl2dTb = createTool( tr( "TB_CTRL2D" ), QString( "SMESHFaceControlsToolbar" ) ),
- ctrl3dTb = createTool( tr( "TB_CTRL3D" ), QString( "SMESHVolumeControlsToolbar" ) ),
- addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ),
- addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ),
- remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ),
- //renumbTb = createTool( tr( "TB_RENUMBER" ), QString( "SMESHRenumberingToolbar" ) ),
- transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ),
- modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ),
- measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ),
- dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) );
-
+ int meshTb = createTool( tr( "TB_MESH" ), QString( "SMESHMeshToolbar" ) ) ;
createTool( SMESHOp::OpCreateMesh, meshTb );
createTool( SMESHOp::OpCreateSubMesh, meshTb );
createTool( SMESHOp::OpEditMeshOrSubMesh, meshTb );
createTool( SMESHOp::OpEvaluate, meshTb );
createTool( SMESHOp::OpMeshOrder, meshTb );
+ int infoTb = createTool( tr( "TB_INFO" ), QString( "SMESHInformationToolbar" ) ) ;
+ createTool( SMESHOp::OpMeshInformation, infoTb );
+ //createTool( SMESHOp::OpStdInfo, meshTb );
+ //createTool( SMESHOp::OpWhatIs, meshTb ); // VSR: issue #0021242 (eliminate "Mesh Element Information" command)
+ createTool( SMESHOp::OpFindElementByPoint, infoTb );
+
+ int groupTb = createTool( tr( "TB_GROUP" ), QString( "SMESHGroupToolbar" ) ) ;
createTool( SMESHOp::OpCreateGroup, groupTb );
createTool( SMESHOp::OpCreateGeometryGroup, groupTb );
createTool( SMESHOp::OpConstructGroup, groupTb );
createTool( SMESHOp::OpEditGroup, groupTb );
- createTool( SMESHOp::OpMeshInformation, info );
- //createTool( SMESHOp::OpStdInfo, meshTb );
- //createTool( SMESHOp::OpWhatIs, meshTb ); // VSR: issue #0021242 (eliminate "Mesh Element Information" command)
- createTool( SMESHOp::OpFindElementByPoint, info );
-
+ int ctrl0dTb = createTool( tr( "TB_CTRL0D" ), QString( "SMESHNodeControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeNode, ctrl0dTb );
createTool( SMESHOp::OpEqualNode, ctrl0dTb );
//createTool( SMESHOp::OpNodeConnectivityNb, ctrl0dTb );
+ int ctrl1dTb = createTool( tr( "TB_CTRL1D" ), QString( "SMESHEdgeControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeBorder, ctrl1dTb );
createTool( SMESHOp::OpLength, ctrl1dTb );
createTool( SMESHOp::OpConnection, ctrl1dTb );
createTool( SMESHOp::OpEqualEdge, ctrl1dTb );
+ int ctrl2dTb = createTool( tr( "TB_CTRL2D" ), QString( "SMESHFaceControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeEdge, ctrl2dTb );
createTool( SMESHOp::OpFreeFace, ctrl2dTb );
createTool( SMESHOp::OpBareBorderFace, ctrl2dTb );
createTool( SMESHOp::OpEqualFace, ctrl2dTb );
createTool( SMESHOp::OpDeflection2D, ctrl2dTb );
+ int ctrl3dTb = createTool( tr( "TB_CTRL3D" ), QString( "SMESHVolumeControlsToolbar" ) ) ;
createTool( SMESHOp::OpAspectRatio3D, ctrl3dTb );
createTool( SMESHOp::OpVolume, ctrl3dTb );
createTool( SMESHOp::OpMaxElementLength3D, ctrl3dTb );
createTool( SMESHOp::OpOverConstrainedVolume, ctrl3dTb );
createTool( SMESHOp::OpEqualVolume, ctrl3dTb );
+ int addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ) ;
createTool( SMESHOp::OpNode, addElemTb );
createTool( SMESHOp::OpElem0D, addElemTb );
createTool( SMESHOp::OpElem0DOnElemNodes, addElemTb );
createTool( SMESHOp::OpHexagonalPrism, addElemTb );
createTool( SMESHOp::OpPolyhedron, addElemTb );
+ int addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ) ;
createTool( SMESHOp::OpQuadraticEdge, addNonElemTb );
createTool( SMESHOp::OpQuadraticTriangle, addNonElemTb );
createTool( SMESHOp::OpBiQuadraticTriangle, addNonElemTb );
createTool( SMESHOp::OpQuadraticHexahedron, addNonElemTb );
createTool( SMESHOp::OpTriQuadraticHexahedron, addNonElemTb );
+ int remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ) ;
createTool( SMESHOp::OpRemoveNodes, remTb );
createTool( SMESHOp::OpRemoveElements, remTb );
createTool( SMESHOp::OpRemoveOrphanNodes, remTb );
createTool( SMESHOp::OpClearMesh, remTb );
+// int renumbTb = createTool( tr( "TB_RENUMBER" ), QString( "SMESHRenumberingToolbar" ) ) ;
//createTool( SMESHOp::OpRenumberingNodes, renumbTb );
//createTool( SMESHOp::OpRenumberingElements, renumbTb );
+ int transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ) ;
createTool( SMESHOp::OpMergeNodes, transformTb );
createTool( SMESHOp::OpMergeElements, transformTb );
createTool( SMESHOp::OpTranslation, transformTb );
createTool( SMESHOp::OpSewing, transformTb );
createTool( SMESHOp::OpDuplicateNodes, transformTb );
+ int modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ) ;
createTool( SMESHOp::OpConvertMeshToQuadratic, modifyTb );
createTool( SMESHOp::OpCreateBoundaryElements, modifyTb );
createTool( SMESHOp::OpExtrusion, modifyTb );
createTool( SMESHOp::OpSmoothing, modifyTb );
createTool( SMESHOp::OpPatternMapping, modifyTb );
+ // Adaptation - begin
+ int adaptTb = createTool( tr( "TB_ADAPTATION" ),QString( "SMESHAdaptationToolbar" ) ) ;
+ createTool( SMESHOp::OpMGAdapt, adaptTb );
+ // Adaptation - end
+
+ int measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ) ;
createTool( SMESHOp::OpMinimumDistance, measuremTb );
+ int dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) );
createTool( SMESHOp::OpUpdate, dispModeTb );
QString lc = "$"; // VSR : instead of QtxPopupSelection::defEquality();
hasVolumes("({'Volume'} in elemTypes)"),
hasFacesOrVolumes("(({'Face'} in elemTypes) || ({'Volume'} in elemTypes)) ");
- createPopupItem( SMESHOp::OpFileInformation, OB, mesh, "&& selcount=1 && isImported" );
- createPopupItem( SMESHOp::OpCreateSubMesh, OB, mesh, "&& hasGeomReference");
createPopupItem( SMESHOp::OpEditMesh, OB, mesh, "&& selcount=1" );
+ createPopupItem( SMESHOp::OpCreateSubMesh, OB, mesh, "&& hasGeomReference");
+ createPopupItem( SMESHOp::OpMeshOrder, OB, mesh, "&& selcount=1 && hasAlgo && hasGeomReference" );
createPopupItem( SMESHOp::OpEditSubMesh, OB, subMesh, "&& selcount=1 && hasGeomReference" );
createPopupItem( SMESHOp::OpEditGroup, OB, group );
createPopupItem( SMESHOp::OpEditGeomGroupAsGroup, OB, group, "&& groupType != 'Group'" );
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpCompute, OB, mesh, "&& selcount=1 && isComputable" );
- createPopupItem( SMESHOp::OpComputeSubMesh, OB, subMesh, "&& selcount=1 && isComputable" );
- createPopupItem( SMESHOp::OpPreCompute, OB, mesh, "&& selcount=1 && isPreComputable" );
- createPopupItem( SMESHOp::OpEvaluate, OB, mesh, "&& selcount=1 && isComputable" );
- createPopupItem( SMESHOp::OpMeshOrder, OB, mesh, "&& selcount=1 && isComputable && hasGeomReference" );
- createPopupItem( SMESHOp::OpUpdate, OB, mesh_part );
+ createPopupItem( SMESHOp::OpCompute, OB, mesh, "&& selcount=1 && hasAlgo && isComputable" );
+ createPopupItem( SMESHOp::OpRecompute, OB, mesh, "&& selcount=1 && hasAlgo && (" + isNotEmpty + " || hasErrors )");
+ createPopupItem( SMESHOp::OpShowErrors, OB, mesh, "&& selcount=1 && hasErrors" );
+ createPopupItem( SMESHOp::OpComputeSubMesh, OB, subMesh, "&& selcount=1 && hasAlgo && isComputable" );
+ createPopupItem( SMESHOp::OpPreCompute, OB, mesh, "&& selcount=1 && hasAlgo && isPreComputable" );
+ createPopupItem( SMESHOp::OpEvaluate, OB, mesh, "&& selcount=1 && hasAlgo && isComputable" );
+ popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpFileInformation, OB, mesh, "&& selcount=1 && isImported" );
createPopupItem( SMESHOp::OpMeshInformation, OB, mesh_part );
- createPopupItem( SMESHOp::OpFindElementByPoint,OB, mesh_group, "&& selcount=1" );
+ createPopupItem( SMESHOp::OpFindElementByPoint,OB, mesh_group, "&& selcount=1 && " + hasElems );
createPopupItem( SMESHOp::OpOverallMeshQuality,OB, mesh_part );
popupMgr()->insert( separator(), -1, 0 );
createPopupItem( SMESHOp::OpCreateGroup, OB, mesh, "&& selcount=1" );
createPopupItem( SMESHOp::OpEditHypothesis, OB, hypo, "&& isEditableHyp");
createPopupItem( SMESHOp::OpUnassign, OB, hyp_alg );
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpConvertMeshToQuadratic, OB, mesh_submesh );
+ createPopupItem( SMESHOp::OpConvertMeshToQuadratic, OB, mesh_submesh, "&& " + hasElems );
createPopupItem( SMESHOp::OpCreateBoundaryElements, OB, mesh_group, "&& selcount=1 && dim>=2");
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpClearMesh, OB, mesh );
- //popupMgr()->insert( separator(), -1, 0 );
+
+ // Adaptation - begin
+ createPopupItem( SMESHOp::OpMGAdapt, OB, mesh );
+ // Adaptation - end
QString only_one_non_empty = QString( " && %1=1 && numberOfNodes>0" ).arg( dc );
QString multiple_non_empty = QString( " && %1>0 && numberOfNodes>0" ).arg( dc );
QString only_one_2D = only_one_non_empty + " && dim>1";
int anId = popupMgr()->insert( tr( "MEN_EXPORT" ), -1, -1 ); // EXPORT submenu
+ popupMgr()->findMenu( anId )->menuAction()->setIcon( resourceMgr()->loadPixmap( "SMESH", tr( "ICON_EXPORT" )));
createPopupItem( SMESHOp::OpPopupExportMED, OB, mesh_group, multiple_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportUNV, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportSTL, OB, mesh_group, only_one_2D, anId );
createPopupItem( SMESHOp::OpPopupExportSAUV, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportGMF, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportDAT, OB, mesh_group, only_one_non_empty, anId );
- createPopupItem( SMESHOp::OpDelete, OB, mesh_part + " " + hyp_alg );
- createPopupItem( SMESHOp::OpDeleteGroup, OB, group );
anId = popupMgr()->insert( tr( "MEN_IMPORT" ), -1, -1 ); // IMPORT submenu
createPopupItem( SMESHOp::OpPopupImportMED, OB, smesh, "", anId );
createPopupItem( SMESHOp::OpPopupImportDAT, OB, smesh, "", anId );
popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpClearMesh, OB, mesh );
+ createPopupItem( SMESHOp::OpDelete, OB, mesh_part + " " + hyp_alg );
+ createPopupItem( SMESHOp::OpDeleteGroup, OB, group );
+
// popup for viewer
createPopupItem( SMESHOp::OpEditGroup, View, group );
createPopupItem( SMESHOp::OpAddElemGroupPopup, View, elems, "&& guiState = 800" );
createPopupItem( SMESHOp::OpRemoveElemGroupPopup, View, elems, "&& guiState = 800" );
popupMgr()->insert( separator(), -1, 0 );
- createPopupItem( SMESHOp::OpUpdate, View, mesh_part );
createPopupItem( SMESHOp::OpMeshInformation, View, mesh_part );
createPopupItem( SMESHOp::OpOverallMeshQuality, View, mesh_part );
- createPopupItem( SMESHOp::OpFindElementByPoint, View, mesh );
+ createPopupItem( SMESHOp::OpFindElementByPoint, View, mesh, "&& " + hasElems);
popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpUpdate, OB + " " + View, mesh_part );
createPopupItem( SMESHOp::OpAutoColor, OB + " " + View, mesh, "&& (not isAutoColor)" );
createPopupItem( SMESHOp::OpDisableAutoColor, OB + " " + View, mesh, "&& isAutoColor" );
popupMgr()->insert( separator(), -1, 0 );
popupMgr()->setRule( action( SMESHOp::OpSortChild ), "$component={'SMESH'} and client='ObjectBrowser' and isContainer and nbChildren>1", QtxPopupMgr::VisibleRule );
popupMgr()->insert( separator(), -1, -1 );
+ popupMgr()->insert( action( SMESHOp::OpBreakLink), -1, -1 );
+ popupMgr()->setRule( action( SMESHOp::OpBreakLink), "$component={'SHAPERSTUDY'} and client='ObjectBrowser' and canBreakLink", QtxPopupMgr::VisibleRule );
+
connect( application(), SIGNAL( viewManagerActivated( SUIT_ViewManager* ) ),
this, SLOT( onViewManagerActivated( SUIT_ViewManager* ) ) );
SALOME_ListIteratorOfListIO It( selected );
for ( ; isCompatible && It.More(); It.Next())
isCompatible =
- ( strcmp("GEOM", It.Value()->getComponentDataType()) == 0 ) ||
- ( strcmp("SMESH", It.Value()->getComponentDataType()) == 0 );
+ ( strcmp("GEOM", It.Value()->getComponentDataType()) == 0 ) ||
+ ( strcmp("SHAPERSTUDY", It.Value()->getComponentDataType()) == 0 ) ||
+ ( strcmp("SMESH", It.Value()->getComponentDataType()) == 0 );
return isCompatible;
}
bool SMESHGUI::reusableOperation( const int id )
{
// compute, evaluate and precompute are not reusable operations
- return ( id == SMESHOp::OpCompute || id == SMESHOp::OpPreCompute || id == SMESHOp::OpEvaluate ) ? false : SalomeApp_Module::reusableOperation( id );
+ return ( id == SMESHOp::OpCompute || id == SMESHOp::OpPreCompute || id == SMESHOp::OpEvaluate || id == SMESHOp::OpRecompute ) ? false : SalomeApp_Module::reusableOperation( id );
+}
+
+namespace
+{
+ QString wrap(const QString& text, const QString& tag)
+ { return QString("<%1>%2</%3>").arg(tag).arg(text).arg(tag);}
}
bool SMESHGUI::activateModule( SUIT_Study* study )
setMenuShown( true );
setToolShown( true );
+ // Fill in Help Panel
+ SalomeApp_Application* app = dynamic_cast<SalomeApp_Application*>( application() );
+ app->infoPanel()->setTitle(tr("INFO_WELCOME_TO_SMESH"));
+
+ int gb = app->infoPanel()->addGroup(tr("INFO_GRP_CREATE_MESH"));
+ QString lab;
+ QStringList items;
+ lab = tr("INFO_DEFINE_ALGOS") + "<br/>";
+ lab = lab + tr("INFO_DEFINE_HYPOS") + "<br/>";
+ lab = lab + tr("INFO_COMPUTE") + "<br/>";
+ lab = lab + tr("INFO_REFINE") + ":";
+ items << wrap(tr("INFO_REFINE_LOCAL_SIZE"), "li")
+ << wrap(tr("INFO_REFINE_SUBMESH"), "li");
+ lab = lab + wrap(items.join(""), "ul");
+ items.clear();
+
+ app->infoPanel()->addLabel(lab, gb);
+
+ gb = app->infoPanel()->addGroup(tr("INFO_GRP_IMPORT_MESH"));
+ items << wrap("UNV", "li")
+ << wrap("MED", "li")
+ << wrap("STL", "li")
+ << wrap("CGNS", "li")
+ << wrap("SAUV", "li")
+ << wrap("GMF", "li");
+ lab = tr("INFO_AVAILABLE_FORMATS") + ":" + wrap(items.join(""), "ul");
+ items.clear();
+
+ app->infoPanel()->addLabel(lab, gb);
+
+ gb = app->infoPanel()->addGroup(tr("INFO_GRP_CHECK_MESH"));
+ lab = tr("INFO_DISPLAY") + "<br/>";
+ items << wrap(tr("INFO_QUALITY_AREA"), "li")
+ << wrap(tr("INFO_QUALITY_VOLUME"), "li")
+ << wrap(tr("INFO_QUALITY_ASPECT_RATION"), "li")
+ << wrap("...", "li");
+ lab = lab + tr("INFO_QUALITY_INFO") + ":" + wrap(items.join(""), "ul");
+ items.clear();
+ lab = lab + tr("INFO_CLIPPING");
+
+ app->infoPanel()->addLabel(lab, gb);
+ // << Help Panel
+
// import Python module that manages SMESH plugins (need to be here because SalomePyQt API uses active module)
PyGILState_STATE gstate = PyGILState_Ensure();
PyObject* pluginsmanager = PyImport_ImportModuleNoBlock((char*)"salome_pluginsmanager");
action(SMESHOp::OpDelete)->setEnabled(true); // Delete: Key_Delete
// 0020210. Make SMESH_Gen update meshes at switching GEOM->SMESH
- GetSMESHGen()->SetCurrentStudy(SALOMEDS::Study::_nil());
- if ( SalomeApp_Study* s = dynamic_cast<SalomeApp_Study*>( study )) {
- if ( _PTR(Study) aStudy = s->studyDS() )
- GetSMESHGen()->SetCurrentStudy( _CAST(Study,aStudy)->GetStudy() );
- }
+ GetSMESHGen()->UpdateStudy();
// get all view currently opened in the study and connect their signals to
// the corresponding slots of the class.
QList<SUIT_ViewWindow*> wndList = aDesk->windows();
SUIT_ViewWindow* wnd;
foreach ( wnd, wndList )
+ {
connectView( wnd );
+
+ // remove actors whose objects are removed in GetSMESHGen()->UpdateStudy()
+ SMESH::UpdateActorsAfterUpdateStudy(wnd);
+
+ wnd->update();
+ }
}
Py_XDECREF(pluginsmanager);
{
if( !s )
return;
- SMESH::RemoveVisuData( s->id() );
+ SMESH::RemoveVisuData();
SalomeApp_Module::studyClosed( s );
}
SMESH::SMESH_Gen_var SMESHGUI::GetSMESHGen()
{
- _PTR(Study) aStudy = SMESH::GetActiveStudyDocument(); //Document OCAF de l'etude active
if ( CORBA::is_nil( myComponentSMESH ) )
- {
- SMESHGUI aGUI; //SRN BugID: IPAL9186: Create an instance of SMESHGUI to initialize myComponentSMESH
- if ( aStudy )
- aGUI.myComponentSMESH->SetCurrentStudy(_CAST(Study,aStudy)->GetStudy());
- return aGUI.myComponentSMESH;
- }
- if ( aStudy )
- myComponentSMESH->SetCurrentStudy(_CAST(Study,aStudy)->GetStudy());
+ {
+ SMESHGUI aGUI; //SRN BugID: IPAL9186: Create an instance of SMESHGUI to initialize myComponentSMESH
+ return aGUI.myComponentSMESH;
+ }
return myComponentSMESH;
}
_PTR(Study) study = appStudy->studyDS();
_PTR(SObject) obj = study->FindObjectID( io->getEntry() );
if ( obj ) {
- QString aName = QString( SMESH::fromUtf8(obj->GetName()) );
- while ( aName.at( aName.length() - 1 ) == ' ' ) // Remove extraspaces in Name of Popup
- aName.remove( (aName.length() - 1), 1 );
+ QString aName = SMESH::fromUtf8( obj->GetName());
+ while ( !aName.isEmpty() && aName.at( aName.length() - 1 ) == ' ' ) // Remove extraspaces in Name of Popup
+ aName.remove(( aName.length() - 1 ), 1 );
title = aName;
}
}
{
aMap.insert( SalomeApp_Application::WT_ObjectBrowser, Qt::LeftDockWidgetArea );
aMap.insert( SalomeApp_Application::WT_NoteBook, Qt::LeftDockWidgetArea );
+ aMap.insert( SalomeApp_Application::WT_InfoPanel, Qt::RightDockWidgetArea);
#ifndef DISABLE_PYCONSOLE
aMap.insert( SalomeApp_Application::WT_PyConsole, Qt::BottomDockWidgetArea );
#endif
void SMESHGUI::ProcessEvents( vtkObject* theObject,
unsigned long theEvent,
void* theClientData,
- void* theCallData )
+ void* /*theCallData*/ )
{
if( SMESHGUI* aSMESHGUI = reinterpret_cast<SMESHGUI*>( theClientData ) ) {
if( theObject && (int) theEvent == SMESH::DeleteActorEvent ) {
int dispgroup = addPreference( tr( "PREF_DISPLAY_MODE_GROUP" ), genTab );
setPreferenceProperty( dispgroup, "columns", 2 );
+
+ addPreference( tr( "PREF_FITALL_ON_DISPLAYONLY" ), dispgroup, LightApp_Preferences::Bool, "SMESH", "fitall_on_displayonly" );
+
int dispmode = addPreference( tr( "PREF_DISPLAY_MODE" ), dispgroup, LightApp_Preferences::Selector, "SMESH", "display_mode" );
QStringList modes;
modes.append( tr("MEN_WIRE") );
setPreferenceProperty( doubleNodesTol, "max", 1000000.0 );
setPreferenceProperty( doubleNodesTol, "step", 0.0000001 );
+ /*
+ int cinc = addPreference(tr("PREF_CONTROLS_INCREMENT"), qaGroup, LightApp_Preferences::IntSpin, "SMESH", "controls_increment");
+ setPreferenceProperty( cinc, "min", 0 );
+ setPreferenceProperty( cinc, "max", 5 );
+ */
int exportgroup = addPreference( tr( "PREF_GROUP_EXPORT" ), genTab );
setPreferenceProperty( exportgroup, "columns", 2 );
addPreference( tr( "PREF_AUTO_GROUPS" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "auto_groups" );
addPreference( tr( "PREF_SHOW_WARN" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "show_warning" );
+ int zTol = addPreference( tr( "PREF_ZTOLERANCE" ), exportgroup, LightApp_Preferences::DblSpin, "SMESH", "med_ztolerance" );
+ setPreferenceProperty( zTol, "precision", 10 );
+ setPreferenceProperty( zTol, "min", 0.0000000001 );
+ setPreferenceProperty( zTol, "max", 1000000.0 );
+ setPreferenceProperty( zTol, "step", 1. );
//addPreference( tr( "PREF_RENUMBER" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "renumbering" );
int computeGroup = addPreference( tr( "PREF_GROUP_COMPUTE" ), genTab );
"SMESH", "nb_segments_per_edge" );
setPreferenceProperty( nbSeg, "min", 1 );
setPreferenceProperty( nbSeg, "max", 10000000 );
+ addPreference( tr( "PREF_USE_MESHGEMS_HYPOSET" ), segGroup, LightApp_Preferences::Bool, "SMESH", "use-meshgems-hypo-sets" );
int loadGroup = addPreference( tr( "SMESH_PREF_MESH_LOADING" ), genTab );
addPreference( tr( "PREF_FORGET_MESH_AT_HYP_MODIF" ), loadGroup, LightApp_Preferences::Bool,
int numGroup = addPreference( tr( "PREF_GROUP_NUMBERING" ), meshTab );
setPreferenceProperty( numGroup, "columns", 2 );
-
+
addPreference( tr( "PREF_NUMBERING_NODE" ), numGroup, LightApp_Preferences::Color, "SMESH", "numbering_node_color" );
addVtkFontPref( tr( "PREF_NUMBERING_FONT" ), numGroup, "numbering_node_font", true );
addPreference( tr( "PREF_ELEMENTS" ), precSelGroup, LightApp_Preferences::Double, "SMESH", "selection_precision_element" );
addPreference( tr( "PREF_OBJECTS" ), precSelGroup, LightApp_Preferences::Double, "SMESH", "selection_precision_object" );
+ int sinc = addPreference(tr("PREF_SELECTION_INCREMENT"), selTab, LightApp_Preferences::IntSpin, "SMESH", "selection_increment");
+ setPreferenceProperty( sinc, "min", 0 );
+ setPreferenceProperty( sinc, "max", 5 );
+
// Scalar Bar tab ------------------------------------------------------------------------
int sbarTab = addPreference( tr( "SMESH_SCALARBAR" ) );
int fontGr = addPreference( tr( "SMESH_FONT_SCALARBAR" ), sbarTab );
setPreferenceProperty( coloringType, "indexes", indices );
addPreference( tr( "SMESH_DISTRIBUTION_COLOR" ), distributionGr, LightApp_Preferences::Color, "SMESH", "distribution_color" );
+ // Adaptation - begin
+ // Adaptation tab ------------------------------------------------------------------------
+ int adaptTab = addPreference( tr( "ADAPT_PREF_TAB_GENERAL" ) );
+ int bloc, pref ;
+ // MG-Adapt
+ bloc = addPreference( tr( "ADAPT_PREF_MG_ADAPT" ), adaptTab );
+ setPreferenceProperty( bloc, "columns", 1 );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT" ), bloc, LightApp_Preferences::Bool, "HOMARD", "mg_adapt_file_mesh_out" );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT" ), bloc, LightApp_Preferences::Bool, "HOMARD", "mg_adapt_publish_mesh_out" );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_SIZE_MAP" ), bloc, LightApp_Preferences::Selector, "HOMARD", "mg_adapt_size_map" );
+ QStringList aListOfSizeMap;
+ aListOfSizeMap << tr( "ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL" );
+ aListOfSizeMap << tr( "ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND" );
+ aListOfSizeMap << tr( "ADAPT_PREF_NONE" );;
+ setPreferenceProperty( pref, "strings", aListOfSizeMap );
+ pref = addPreference( tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP" ), bloc, LightApp_Preferences::Selector, "HOMARD", "mg_adapt_time_step" );
+ QStringList aListOfTimeStep;
+ aListOfTimeStep << tr( "ADAPT_PREF_NONE" );
+ aListOfTimeStep << tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST" );
+ aListOfTimeStep << tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP_C" );;
+ setPreferenceProperty( pref, "strings", aListOfTimeStep );
+ // Adaptation - end
+
}
void SMESHGUI::preferencesChanged( const QString& sect, const QString& name )
std::string aWarning;
SUIT_ResourceMgr* aResourceMgr = SMESH::GetResourceMgr(this);
- if ( name== "selection_object_color" ||
- name=="selection_element_color" ||
- name== "highlight_color" ||
- name=="selection_precision_node" ||
- name=="selection_precision_element" ||
- name=="selection_precision_object" )
+ if ( name == "selection_object_color" ||
+ name == "selection_element_color" ||
+ name == "highlight_color" ||
+ name == "selection_precision_node" ||
+ name == "selection_precision_element" ||
+ name == "selection_precision_object" ||
+ name == "selection_increment")
{
SMESH::UpdateSelectionProp( this );
}
// to do : create operation here
switch( id )
{
- case SMESHOp::OpSplitBiQuadratic:
- op = new SMESHGUI_SplitBiQuadOp();
+ case SMESHOp::OpSplitBiQuadratic:
+ op = new SMESHGUI_SplitBiQuadOp();
break;
- case SMESHOp::OpConvertMeshToQuadratic:
- op = new SMESHGUI_ConvToQuadOp();
+ case SMESHOp::OpConvertMeshToQuadratic:
+ op = new SMESHGUI_ConvToQuadOp();
break;
- case SMESHOp::OpCreateBoundaryElements: // create 2D mesh as boundary on 3D
- op = new SMESHGUI_Make2DFrom3DOp();
+ case SMESHOp::OpCreateBoundaryElements: // create 2D mesh as boundary on 3D
+ op = new SMESHGUI_Make2DFrom3DOp();
break;
- case SMESHOp::OpReorientFaces:
- op = new SMESHGUI_ReorientFacesOp();
- break;
- case SMESHOp::OpCreateMesh:
- op = new SMESHGUI_MeshOp( true, true );
+ case SMESHOp::OpReorientFaces:
+ op = new SMESHGUI_ReorientFacesOp();
break;
- case SMESHOp::OpCreateSubMesh:
- op = new SMESHGUI_MeshOp( true, false );
+ case SMESHOp::OpCreateMesh:
+ op = new SMESHGUI_MeshOp( true, true );
break;
- case SMESHOp::OpEditMeshOrSubMesh:
- case SMESHOp::OpEditMesh:
- case SMESHOp::OpEditSubMesh:
- op = new SMESHGUI_MeshOp( false );
+ case SMESHOp::OpCreateSubMesh:
+ op = new SMESHGUI_MeshOp( true, false );
break;
- case SMESHOp::OpCompute:
- case SMESHOp::OpComputeSubMesh:
- op = new SMESHGUI_ComputeOp();
+ case SMESHOp::OpEditMeshOrSubMesh:
+ case SMESHOp::OpEditMesh:
+ case SMESHOp::OpEditSubMesh:
+ op = new SMESHGUI_MeshOp( false );
break;
- case SMESHOp::OpPreCompute:
- op = new SMESHGUI_PrecomputeOp();
+ case SMESHOp::OpCompute:
+ case SMESHOp::OpComputeSubMesh:
+ op = new SMESHGUI_ComputeOp();
break;
- case SMESHOp::OpEvaluate:
- op = new SMESHGUI_EvaluateOp();
+ case SMESHOp::OpShowErrors:
+ op = new SMESHGUI_ShowErrorsOp();
break;
- case SMESHOp::OpMeshOrder:
- op = new SMESHGUI_MeshOrderOp();
+ case SMESHOp::OpPreCompute:
+ op = new SMESHGUI_PrecomputeOp();
break;
- case SMESHOp::OpCreateGeometryGroup:
- op = new SMESHGUI_GroupOnShapeOp();
- break;
- case SMESHOp::OpFindElementByPoint:
- op = new SMESHGUI_FindElemByPointOp();
- break;
- case SMESHOp::OpMoveNode: // Make mesh pass through point
- op = new SMESHGUI_MakeNodeAtPointOp();
- break;
- case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes
- op = new SMESHGUI_Add0DElemsOnAllNodesOp();
- break;
- default:
+ case SMESHOp::OpEvaluate:
+ op = new SMESHGUI_EvaluateOp();
+ break;
+ case SMESHOp::OpMeshOrder:
+ op = new SMESHGUI_MeshOrderOp();
+ break;
+ case SMESHOp::OpCreateGeometryGroup:
+ op = new SMESHGUI_GroupOnShapeOp();
+ break;
+ case SMESHOp::OpFindElementByPoint:
+ op = new SMESHGUI_FindElemByPointOp();
+ break;
+ case SMESHOp::OpMoveNode: // Make mesh pass through point
+ op = new SMESHGUI_MakeNodeAtPointOp();
+ break;
+ case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes
+ op = new SMESHGUI_Add0DElemsOnAllNodesOp();
+ break;
+ // Adaptation - begin
+ case SMESHOp::OpMGAdapt:
+ break;
+ // Adaptation - end
+ default:
break;
}
void SMESHGUI::switchToOperation(int id)
{
- if ( _PTR(Study) aStudy = SMESH::GetActiveStudyDocument() )
- activeStudy()->abortAllOperations();
+ activeStudy()->abortAllOperations();
startOperation( id );
}
* \brief Store visual parameters
*
* This method is called just before the study document is saved.
- * Store visual parameters in AttributeParameter attribue(s)
+ * Store visual parameters in AttributeParameter attribute(s)
*/
void SMESHGUI::storeVisualParameters (int savePoint)
{
savePoint);
_PTR(IParameters) ip = ClientFactory::getIParameters(ap);
- // store map of custom markers
- const VTK::MarkerMap& aMarkerMap = myMarkerMap[ studyDS->StudyId() ];
- if( !aMarkerMap.empty() )
+ // store custom markers
+ if( !myMarkerMap.empty() )
{
- VTK::MarkerMap::const_iterator anIter = aMarkerMap.begin();
- for( ; anIter != aMarkerMap.end(); anIter++ )
+ VTK::MarkerMap::const_iterator anIter = myMarkerMap.begin();
+ for( ; anIter != myMarkerMap.end(); anIter++ )
{
int anId = anIter->first;
VTK::MarkerData aMarkerData = anIter->second;
* \brief Restore visual parameters
*
* This method is called after the study document is opened.
- * Restore visual parameters from AttributeParameter attribue(s)
+ * Restore visual parameters from AttributeParameter attribute(s)
*/
void SMESHGUI::restoreVisualParameters (int savePoint)
{
// componentName is used for encoding of entries when storing them in IParameters
std::string componentName = myComponentSMESH->ComponentDataType();
- //_PTR(SComponent) aSComponent = studyDS->FindComponent("GEOM");
- //if (!aSComponent) return;
// IParameters
_PTR(AttributeParameter) ap = studyDS->GetModuleParameters("Interface Applicative",
savePoint);
_PTR(IParameters) ip = ClientFactory::getIParameters(ap);
- // restore map of custom markers and map of clipping planes
- VTK::MarkerMap& aMarkerMap = myMarkerMap[ studyDS->StudyId() ];
+ // restore custom markers and map of clipping planes
TPlaneDataMap aPlaneDataMap;
std::vector<std::string> properties = ip->getProperties();
aMarkerTexture.push_back( aChar.digitValue() );
}
- aMarkerMap[ anId ] = VTK::MarkerData( aMarkerFileName, aMarkerTexture );
+ myMarkerMap[ anId ] = VTK::MarkerData( aMarkerFileName, aMarkerTexture );
}
else if( aPropertyType == "ClippingPlane" )
{
aPlaneData.Mode = aPropertyValueList[0].toInt( &ok );
if( !ok )
continue;
-
+
ok = false;
aPlaneData.isOpenGLClipping = aPropertyValueList[1].toInt( &ok );
if( !ok )
// Check that the entry corresponds to a real object in the Study
// as the object may be deleted or modified after the visual state is saved.
- _PTR(SObject) so = studyDS->FindObjectID(entry.toLatin1().data());
+ _PTR(SObject) so = studyDS->FindObjectID(entry.toUtf8().data());
if (!so) continue; //Skip the not existent entry
std::vector<std::string> paramNames = ip->getAllParameterNames( *entIt );
SMESH_Actor* aGeomAc = SMESH_Actor::SafeDownCast(ac);
if (aGeomAc->hasIO()) {
Handle(SALOME_InteractiveObject) io = aGeomAc->getIO();
- if (io->hasEntry() && strcmp(io->getEntry(), entry.toLatin1().data()) == 0) {
+ if (io->hasEntry() && strcmp(io->getEntry(), entry.toUtf8().data()) == 0) {
isFound = true;
vtkActors.Bind(viewIndex, aGeomAc);
}
aSmeshActor->SetMarkerStd( (VTK::MarkerType)aParam1, (VTK::MarkerScale)aParam2 );
}
else if( data[0] == "custom" ) {
- VTK::MarkerMap::const_iterator markerIt = aMarkerMap.find( aParam1 );
- if( markerIt != aMarkerMap.end() ) {
+ VTK::MarkerMap::const_iterator markerIt = myMarkerMap.find( aParam1 );
+ if( markerIt != myMarkerMap.end() ) {
VTK::MarkerData aMarkerData = markerIt->second;
aSmeshActor->SetMarkerTexture( aParam1, aMarkerData.second );
}
// Clipping
else if (paramNameStr.startsWith("ClippingPlane")) {
QStringList vals = val.split(gDigitsSep, QString::SkipEmptyParts);
- // old format - val looks like "Off" or "1:0:0:0.5:0:0"
+ // old format - val looks like "Off" or "1:0:0:0.5:0:0"
// (mode(relative), is OpenGL clipping plane, orientation, distance, two angles)
- // or "0:1:1:10.5:1.0:1.0:15.0:10.0:10.0"
+ // or "0:1:1:10.5:1.0:1.0:15.0:10.0:10.0"
// (mode(absolute), is OpenGL clipping plane, orientation, base point(x, y, z), direction (dx, dy, dz))
// new format - val looks like "Off" or "0" (plane id)
// (note: in new format "Off" value is used only for consistency,
break;
}
}
-
+
}
}
-
+
// update all VTK views
QList<SUIT_ViewManager*> lst;
while( vtkActor* aVTKActor = anAllActors->GetNextActor() )
if( SMESH_Actor* anActor = SMESH_Actor::SafeDownCast( aVTKActor ) )
anActor->SetOpenGLClippingPlane();
-
+
vtkView->getRenderer()->ResetCameraClippingRange();
vtkView->Repaint();
}
// get study
_PTR(Study) study = dynamic_cast<SalomeApp_Study*>( application()->activeStudy() )->studyDS();
// get mesh name
- _PTR(SObject) obj = study->FindObjectID( entry.toLatin1().constData() );
+ _PTR(SObject) obj = study->FindObjectID( entry.toUtf8().constData() );
QString name;
if ( obj )
name = SMESH::fromUtf8(obj->GetName());
if ( name.isEmpty() )
return;
-
+
if ( data.last() == "stop" )
application()->putInfo( tr( "MESH_LOADING_MSG_FINISHED" ).arg( name ) );
else
return false;
SalomeApp_DataObject* obj = dynamic_cast<SalomeApp_DataObject*>(appStudy->findObjectByEntry(entry));
-
+
if(!obj)
return false;
return false;
// check type to prevent renaming of inappropriate objects
- int aType = SMESHGUI_Selection::type(qPrintable(entry), SMESH::GetActiveStudyDocument());
+ int aType = SMESHGUI_Selection::type(qPrintable(entry));
if (aType == SMESH::MESH || aType == SMESH::GROUP ||
aType == SMESH::SUBMESH || aType == SMESH::SUBMESH_COMPOUND ||
aType == SMESH::SUBMESH_SOLID || aType == SMESH::SUBMESH_FACE ||
SalomeApp_Application* anApp = dynamic_cast<SalomeApp_Application*>( application() );
if( !anApp )
return false;
-
+
SalomeApp_Study* appStudy = dynamic_cast<SalomeApp_Study*>( anApp->activeStudy() );
if(!appStudy)
return false;
-
+
_PTR(Study) aStudy = appStudy->studyDS();
-
+
if(!aStudy)
return false;
-
+
bool aLocked = (_PTR(AttributeStudyProperties)(appStudy->studyDS()->GetProperties()))->IsLocked();
if ( aLocked ) {
SUIT_MessageBox::warning ( anApp->desktop(), QObject::tr("WRN_WARNING"), QObject::tr("WRN_STUDY_LOCKED") );
if ( obj->FindAttribute(anAttr, "AttributeName") ) {
aName = anAttr;
// check type to prevent renaming of inappropriate objects
- int aType = SMESHGUI_Selection::type( qPrintable(entry), SMESH::GetActiveStudyDocument() );
+ int aType = SMESHGUI_Selection::type( qPrintable(entry));
if (aType == SMESH::MESH || aType == SMESH::GROUP ||
aType == SMESH::SUBMESH || aType == SMESH::SUBMESH_COMPOUND ||
aType == SMESH::SUBMESH_SOLID || aType == SMESH::SUBMESH_FACE ||
aType == SMESH::SUBMESH_EDGE || aType == SMESH::SUBMESH_VERTEX ||
aType == SMESH::HYPOTHESIS || aType == SMESH::ALGORITHM) {
if ( !name.isEmpty() ) {
- SMESHGUI::GetSMESHGen()->SetName(obj->GetIOR().c_str(), qPrintable(name) );
+ SMESHGUI::GetSMESHGen()->SetName(obj->GetIOR().c_str(), qUtf8Printable(name) );
// update name of group object and its actor
Handle(SALOME_InteractiveObject) IObject =
SMESH::SMESH_GroupBase_var aGroupObject = SMESH::IObjectToInterface<SMESH::SMESH_GroupBase>(IObject);
if( !aGroupObject->_is_nil() ) {
- aGroupObject->SetName( qPrintable(name) );
+ aGroupObject->SetName( qUtf8Printable(name) );
if ( SMESH_Actor *anActor = SMESH::FindActorByEntry( qPrintable(entry) ) )
- anActor->setName( qPrintable(name) );
+ anActor->setName( qUtf8Printable(name) );
}
return true;
}