<?xml version='1.0' encoding='us-ascii'?>
<!DOCTYPE meshers PUBLIC "" "desktop.dtd">
<!--
- Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+ Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
- version 2.1 of the License.
+ version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
icon-id ="mesh_hypo_length.png"
dim ="1"/>
+ <hypothesis type ="GeometricProgression"
+ label-id ="Geometric Progression"
+ icon-id ="mesh_hypo_length.png"
+ dim ="1"/>
+
<hypothesis type ="FixedPoints1D"
label-id ="Fixed Points 1D"
icon-id ="mesh_hypo_length.png"
label-id ="Propagation of 1D Hyp. on Opposite Edges"
icon-id ="mesh_hypo_length.png"
dim ="1"
+ context ="LOCAL"
+ auxiliary="true"/>
+
+ <hypothesis type ="PropagOfDistribution"
+ label-id ="Propagation of Node Distribution on Opposite Edges"
+ icon-id ="mesh_hypo_length.png"
+ dim ="1"
+ context ="LOCAL"
auxiliary="true"/>
<hypothesis type ="AutomaticLength"
label-id ="Quadratic Mesh"
icon-id ="mesh_algo_quad.png"
dim ="1"
+ context ="GLOBAL"
auxiliary="true"/>
<hypothesis type ="MaxElementArea"
label-id ="Not Conform Mesh Allowed"
icon-id ="mesh_hypo_length.png"
dim ="1,2,3"
+ context ="GLOBAL"
auxiliary="true"/>
<hypothesis type ="MaxElementVolume"
<hypothesis type ="CartesianParameters3D"
label-id ="Body Fitting Parameters"
icon-id ="mesh_hypo_length.png"
+ context ="GLOBAL"
dim ="3"/>
</hypotheses>
icon-id ="mesh_algo_regular.png"
hypos ="SegmentLengthAroundVertex"
output ="VERTEX"
+ need-hyp ="true"
dim ="0"/>
<algorithm type ="Regular_1D"
label-id ="Wire Discretisation"
icon-id ="mesh_algo_regular.png"
- hypos ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
- opt-hypos="Propagation,QuadraticMesh"
+ hypos ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,GeometricProgression,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
+ opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
input ="VERTEX"
output ="EDGE"
+ need-hyp ="true"
dim ="1">
<python-wrap>
<algo>Regular_1D=Segment()</algo>
<hypo>LocalLength=LocalLength(SetLength(1),,SetPrecision(1))</hypo>
<hypo>MaxLength=MaxSize(SetLength(1))</hypo>
<hypo>Arithmetic1D=Arithmetic1D(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
+ <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
<hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
<hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
<hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
<hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
<hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
<hypo>Propagation=Propagation()</hypo>
+ <hypo>PropagOfDistribution=PropagationOfDistribution()</hypo>
<hypo>QuadraticMesh=QuadraticMesh()</hypo>
</python-wrap>
</algorithm>
<algorithm type ="CompositeSegment_1D"
label-id ="Composite Side Discretisation"
icon-id ="mesh_algo_regular.png"
- hypos ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
- opt-hypos="Propagation,QuadraticMesh"
+ hypos ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,GeometricProgression,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
+ opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
input ="VERTEX"
output ="EDGE"
+ need-hyp ="true"
dim ="1">
<python-wrap>
<algo>CompositeSegment_1D=Segment(algo=smeshBuilder.COMPOSITE)</algo>
<hypo>LocalLength=LocalLength(SetLength(), ,SetPrecision())</hypo>
<hypo>MaxLength=MaxSize(SetLength())</hypo>
<hypo>Arithmetic1D=Arithmetic1D(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
+ <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
<hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
<hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
<hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
<hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
<hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
<hypo>Propagation=Propagation()</hypo>
+ <hypo>PropagOfDistribution=PropagationOfDistribution()</hypo>
<hypo>QuadraticMesh=QuadraticMesh()</hypo>
</python-wrap>
</algorithm>
dim ="2">
<python-wrap>
<algo>Quadrangle_2D=Quadrangle(algo=smeshBuilder.QUADRANGLE)</algo>
- <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex())</hypo>
+ <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex(),SetEnforcedNodes(1),SetEnforcedNodes(2))</hypo>
<hypo>ViscousLayers2D=ViscousLayers2D(SetTotalThickness(),SetNumberLayers(),SetStretchFactor(),SetIgnoreEdges())</hypo>
</python-wrap>
</algorithm>
label-id ="Hexahedron (i,j,k)"
icon-id ="mesh_algo_hexa.png"
input ="QUAD"
+ output ="HEXA,PENTA"
need-geom="false"
opt-hypos="ViscousLayers"
dim ="3">
icon-id ="mesh_algo_regular.png"
hypos ="ProjectionSource1D"
output ="EDGE"
+ need-hyp="true"
dim ="1">
<python-wrap>
<algo>Projection_1D=Projection1D()</algo>
input ="EDGE"
hypos ="ProjectionSource2D"
output ="QUAD,TRIA"
+ need-hyp="true"
dim ="2">
<python-wrap>
<algo>Projection_2D=Projection2D()</algo>
icon-id ="mesh_algo_quad.png"
hypos ="ProjectionSource2D"
output ="QUAD,TRIA"
+ need-hyp="true"
dim ="2">
<python-wrap>
<algo>Projection_1D2D=Projection1D2D()</algo>
icon-id ="mesh_algo_hexa.png"
hypos ="ProjectionSource3D"
input ="QUAD,TRIA"
+ need-hyp="true"
dim ="3">
<python-wrap>
<algo>Projection_3D=Projection3D()</algo>
</algorithm>
<algorithm type ="Import_1D"
- label-id="Use Existing 1D Elements"
+ label-id="Import 1D Elements from Another Mesh"
icon-id ="mesh_algo_regular.png"
hypos ="ImportSource1D"
output ="EDGE"
+ need-hyp="true"
dim ="1">
<python-wrap>
<algo>Import_1D=UseExisting1DElements()</algo>
</algorithm>
<algorithm type ="Import_1D2D"
- label-id ="Use Existing 2D Elements"
+ label-id ="Import 1D-2D Elements from Another Mesh"
icon-id ="mesh_algo_quad.png"
hypos ="ImportSource2D"
output ="QUAD,TRIA"
support-submeshes="false"
+ need-hyp ="true"
dim ="2">
<python-wrap>
<algo>Import_1D2D=UseExisting2DElements()</algo>
label-id="3D Extrusion"
icon-id ="mesh_algo_hexa.png"
input ="QUAD,TRIA"
+ output ="HEXA,PENTA,OCTA,POLYHEDRON"
dim ="3">
<python-wrap>
<algo>Prism_3D=Prism()</algo>
icon-id ="mesh_algo_hexa.png"
hypos ="NumberOfLayers, LayerDistribution"
input ="QUAD,TRIA"
+ output ="HEXA,PENTA,OCTA,POLYHEDRON"
+ need-hyp="true"
dim ="3">
<python-wrap>
<algo>RadialPrism_3D=Prism('RadialPrism_3D')</algo>
</algorithm>
<algorithm type ="UseExisting_1D"
- label-id="Use Existing Edges"
+ label-id="Use Edges to be Created Manually"
icon-id ="mesh_algo_regular.png"
input ="VERTEX"
output ="EDGE"
</algorithm>
<algorithm type ="UseExisting_2D"
- label-id="Use Existing Faces"
+ label-id="Use Faces to be Created Manually"
icon-id ="mesh_algo_quad.png"
input ="EDGE"
output ="QUAD,TRIA"
icon-id ="mesh_algo_quad.png"
hypos ="NumberOfLayers2D, LayerDistribution2D"
input ="EDGE"
- output ="QUAD,TRIA"
+ output ="QUAD"
dim ="2">
<python-wrap>
<algo>RadialQuadrangle_1D2D=Quadrangle(algo=smeshBuilder.RADIAL_QUAD)</algo>
icon-id ="mesh_algo_hexa.png"
hypos ="CartesianParameters3D"
support-submeshes="false"
+ output ="HEXA"
+ need-hyp ="true"
+ context ="GLOBAL"
dim ="3">
<python-wrap>
<algo>Cartesian_3D=BodyFitted()</algo>