#include "SMESH_Mesh.idl"
#include "SMESH_Gen.idl"
+#include "SMESH_smIdType.idl"
module SMESH
{
struct FreeBorderPart
{
short border; // border index within a sequence<FreeBorder>
- long node1; // node index within the border-th FreeBorder
- long node2;
- long nodeLast;
+ smIdType node1; // node index within the border-th FreeBorder
+ smIdType node2;
+ smIdType nodeLast;
};
typedef sequence<FreeBorder> ListOfFreeBorders;
typedef sequence<FreeBorderPart> FreeBordersGroup;
// else ==> point is at xyz*
// point 1
- long node1ID1;
- long node1ID2;
+ smIdType node1ID1;
+ smIdType node1ID2;
PointStruct xyz1;
// point 2
- long node2ID1;
- long node2ID2;
+ smIdType node2ID1;
+ smIdType node2ID2;
PointStruct xyz2;
// vector on the plane; to use a default plane set vector = (0,0,0)
// face edge defined by two nodes + optional medium node
struct FaceEdge
{
- long node1;
- long node2;
- long medium;
+ smIdType node1;
+ smIdType node2;
+ smIdType medium;
};
typedef sequence<FaceEdge> ListOfEdges;
* \brief Remove all orphan nodes.
* \return number of removed nodes
*/
- long RemoveOrphanNodes() raises (SALOME::SALOME_Exception);
+ smIdType RemoveOrphanNodes() raises (SALOME::SALOME_Exception);
/*!
* \brief Add a new node.
* \param z Z coordinate of new node
* \return integer identifier of new node
*/
- long AddNode(in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
+ smIdType AddNode(in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
/*!
* Create a 0D element on the given node.
* \param IdOfNode Node IDs for creation of element.
* \param DuplicateElements to add one more 0D element to a node or not
*/
- long Add0DElement(in long IDOfNode,
+ smIdType Add0DElement(in smIdType IDOfNode,
in boolean DuplicateElements) raises (SALOME::SALOME_Exception);
/*!
* Create a ball element on the given node.
* \param IdOfNode Node IDs for creation of element.
*/
- long AddBall(in long IDOfNode, in double diameter) raises (SALOME::SALOME_Exception);
+ smIdType AddBall(in smIdType IDOfNode, in double diameter) raises (SALOME::SALOME_Exception);
/*!
* Create an edge, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddEdge(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
+ smIdType AddEdge(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create face, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddFace(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
+ smIdType AddFace(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
- long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+ smIdType AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create a quadratic polygonal face
* \param IdsOfNodes - nodes of the polygon; corner nodes follow first
- * \return long - ID of a new polygon
+ * \return smIdType- ID of a new polygon
*/
- long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+ smIdType AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create volume, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddVolume(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
+ smIdType AddVolume(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create volume of many faces, giving nodes for each face.
* \param Quantities List of integer values, Quantities[i]
* gives quantity of nodes in face number i.
*/
- long AddPolyhedralVolume (in long_array IdsOfNodes,
+ smIdType AddPolyhedralVolume (in long_array IdsOfNodes,
in long_array Quantities) raises (SALOME::SALOME_Exception);
/*!
* Create volume of many faces, giving IDs of existing faces.
* \note The created volume will refer only to nodes
* of the given faces, not to the faces itself.
*/
- long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception);
+ smIdType AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception);
/*!
* Create 0D elements on all nodes of the given object.
* \param NodeID - node ID
* \param VertexID - vertex ID available through GEOM_Object.GetSubShapeIndices()[0]
*/
- void SetNodeOnVertex(in long NodeID, in long VertexID)
+ void SetNodeOnVertex(in smIdType NodeID, in smIdType VertexID)
raises (SALOME::SALOME_Exception);
/*!
* \brief Store node position on an edge
* \param EdgeID - edge ID available through GEOM_Object.GetSubShapeIndices()[0]
* \param paramOnEdge - parameter on edge where the node is located
*/
- void SetNodeOnEdge(in long NodeID, in long EdgeID, in double paramOnEdge)
+ void SetNodeOnEdge(in smIdType NodeID, in smIdType EdgeID, in double paramOnEdge)
raises (SALOME::SALOME_Exception);
/*!
* \brief Store node position on a face
* \param u - U parameter on face where the node is located
* \param v - V parameter on face where the node is located
*/
- void SetNodeOnFace(in long NodeID, in long FaceID, in double u, in double v)
+ void SetNodeOnFace(in smIdType NodeID, in smIdType FaceID, in double u, in double v)
raises (SALOME::SALOME_Exception);
/*!
* \brief Bind a node to a solid
* \param NodeID - node ID
* \param SolidID - vertex ID available through GEOM_Object.GetSubShapeIndices()[0]
*/
- void SetNodeInVolume(in long NodeID, in long SolidID)
+ void SetNodeInVolume(in smIdType NodeID, in smIdType SolidID)
raises (SALOME::SALOME_Exception);
/*!
* \brief Bind an element to a shape
* \param ElementID - element ID
* \param ShapeID - shape ID available through GEOM_Object.GetSubShapeIndices()[0]
*/
- void SetMeshElementOnShape(in long ElementID, in long ShapeID)
+ void SetMeshElementOnShape(in smIdType ElementID, in smIdType ShapeID)
raises (SALOME::SALOME_Exception);
- boolean MoveNode(in long NodeID, in double x, in double y, in double z)
+ boolean MoveNode(in smIdType NodeID, in double x, in double y, in double z)
raises (SALOME::SALOME_Exception);
- boolean InverseDiag(in long NodeID1, in long NodeID2)
+ boolean InverseDiag(in smIdType NodeID1, in smIdType NodeID2)
raises (SALOME::SALOME_Exception);
- boolean DeleteDiag(in long NodeID1, in long NodeID2)
+ boolean DeleteDiag(in smIdType NodeID1, in smIdType NodeID2)
raises (SALOME::SALOME_Exception);
boolean Reorient(in long_array IDsOfElements)
* \param thePoint - is used to find a face if \a theFace < 1.
* \return number of reoriented faces.
*/
- long Reorient2D(in SMESH_IDSource the2Dgroup,
+ smIdType Reorient2D(in SMESH_IDSource the2Dgroup,
in DirStruct theDirection,
- in long theFace,
+ in smIdType theFace,
in PointStruct thePoint) raises (SALOME::SALOME_Exception);
/*!
* \brief Reorient faces basing on orientation of adjacent volumes.
* pointing either \a outside or \a inside the adjacent volumes.
* \return number of reoriented faces.
*/
- long Reorient2DBy3D(in ListOfIDSources faces,
+ smIdType Reorient2DBy3D(in ListOfIDSources faces,
in SMESH_IDSource volumes,
in boolean outsideNormal) raises (SALOME::SALOME_Exception);
* \return 1 if 1-3 diagonal is better, 2 if 2-4
* diagonal is better, 0 if error occurs.
*/
- long BestSplit (in long IDOfQuad,
+ smIdType BestSplit (in smIdType IDOfQuad,
in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
/*!
boolean Smooth(in long_array IDsOfElements,
in long_array IDsOfFixedNodes,
- in long MaxNbOfIterations,
+ in smIdType MaxNbOfIterations,
in double MaxAspectRatio,
in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothObject(in SMESH_IDSource theObject,
in long_array IDsOfFixedNodes,
- in long MaxNbOfIterations,
+ in smIdType MaxNbOfIterations,
in double MaxAspectRatio,
in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothParametric(in long_array IDsOfElements,
in long_array IDsOfFixedNodes,
- in long MaxNbOfIterations,
+ in smIdType MaxNbOfIterations,
in double MaxAspectRatio,
in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothParametricObject(in SMESH_IDSource theObject,
in long_array IDsOfFixedNodes,
- in long MaxNbOfIterations,
+ in smIdType MaxNbOfIterations,
in double MaxAspectRatio,
in Smooth_Method Method) raises (SALOME::SALOME_Exception);
in ListOfIDSources Faces,
in AxisStruct Axis,
in double AngleInRadians,
- in long NbOfSteps,
+ in smIdType NbOfSteps,
in double Tolerance,
in boolean ToMakeGroups)
raises (SALOME::SALOME_Exception);
in ListOfIDSources edges,
in ListOfIDSources faces,
in DirStruct stepVector,
- in long nbOfSteps,
+ in smIdType nbOfSteps,
in boolean toMakeGroups,
in double_array scaleFactors,
in boolean scaleVariation,
*/
ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects,
in double stepSize,
- in long nbOfSteps,
+ in smIdType nbOfSteps,
in boolean byAverageNormal,
in boolean useInputElemsOnly,
in boolean makeGroups,
*/
ListOfGroups AdvancedExtrusion(in long_array IDsOfElements,
in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
+ in smIdType NbOfSteps,
+ in smIdType ExtrFlags,
in double SewTolerance,
in boolean ToMakeGroups)
raises (SALOME::SALOME_Exception);
in ListOfIDSources Faces,
in SMESH_IDSource Path,
in GEOM::GEOM_Object PathShape,
- in long NodeStart,
+ in smIdType NodeStart,
in boolean HasAngles,
in double_array Angles,
in boolean AnglesVariation,
* If the given ID is a valid node ID (nodeID > 0), just move this node, else
* move the node closest to the point to point's location and return ID of the node
*/
- long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID)
+ smIdType MoveClosestNodeToPoint(in double x, in double y, in double z, in smIdType nodeID)
raises (SALOME::SALOME_Exception);
/*!
* Return ID of node closest to a given point
*/
- long FindNodeClosestTo(in double x, in double y, in double z)
+ smIdType FindNodeClosestTo(in double x, in double y, in double z)
raises (SALOME::SALOME_Exception);
/*!
* and coordinates of the projection point.
* In the case if nothing found, return -1 and []
*/
- long ProjectPoint(in double x,
+ smIdType ProjectPoint(in double x,
in double y,
in double z,
in ElementType type,
* If a group is closed, the first and last nodes of the group are same.
*/
array_of_long_array Get1DBranches( in SMESH_IDSource edges,
- in long startNode,
+ in smIdType startNode,
out array_of_long_array nodeGroups)
raises (SALOME::SALOME_Exception);
SEW_INTERNAL_ERROR
};
- Sew_Error SewFreeBorders (in long FirstNodeID1,
- in long SecondNodeID1,
- in long LastNodeID1,
- in long FirstNodeID2,
- in long SecondNodeID2,
- in long LastNodeID2,
+ Sew_Error SewFreeBorders (in smIdType FirstNodeID1,
+ in smIdType SecondNodeID1,
+ in smIdType LastNodeID1,
+ in smIdType FirstNodeID2,
+ in smIdType SecondNodeID2,
+ in smIdType LastNodeID2,
in boolean CreatePolygons,
in boolean CreatePolyedrs)
raises (SALOME::SALOME_Exception);
- Sew_Error SewConformFreeBorders (in long FirstNodeID1,
- in long SecondNodeID1,
- in long LastNodeID1,
- in long FirstNodeID2,
- in long SecondNodeID2)
+ Sew_Error SewConformFreeBorders (in smIdType FirstNodeID1,
+ in smIdType SecondNodeID1,
+ in smIdType LastNodeID1,
+ in smIdType FirstNodeID2,
+ in smIdType SecondNodeID2)
raises (SALOME::SALOME_Exception);
- Sew_Error SewBorderToSide (in long FirstNodeIDOnFreeBorder,
- in long SecondNodeIDOnFreeBorder,
- in long LastNodeIDOnFreeBorder,
- in long FirstNodeIDOnSide,
- in long LastNodeIDOnSide,
+ Sew_Error SewBorderToSide (in smIdType FirstNodeIDOnFreeBorder,
+ in smIdType SecondNodeIDOnFreeBorder,
+ in smIdType LastNodeIDOnFreeBorder,
+ in smIdType FirstNodeIDOnSide,
+ in smIdType LastNodeIDOnSide,
in boolean CreatePolygons,
in boolean CreatePolyedrs)
raises (SALOME::SALOME_Exception);
Sew_Error SewSideElements (in long_array IDsOfSide1Elements,
in long_array IDsOfSide2Elements,
- in long NodeID1OfSide1ToMerge,
- in long NodeID1OfSide2ToMerge,
- in long NodeID2OfSide1ToMerge,
- in long NodeID2OfSide2ToMerge)
+ in smIdType NodeID1OfSide1ToMerge,
+ in smIdType NodeID1OfSide2ToMerge,
+ in smIdType NodeID2OfSide1ToMerge,
+ in smIdType NodeID2OfSide2ToMerge)
raises (SALOME::SALOME_Exception);
/*!
* If number of nodes is not corresponded to type of
* element - returns false
*/
- boolean ChangeElemNodes(in long ide, in long_array newIDs)
+ boolean ChangeElemNodes(in smIdType ide, in long_array newIDs)
raises (SALOME::SALOME_Exception);
/*!
* \return TRUE if operation has been completed successfully, FALSE otherwise
* \sa DoubleNodes(), DoubleNodeGroup(), DoubleNodeGroups()
*/
- boolean DoubleNode( in long theNodeId, in long_array theModifiedElems )
+ boolean DoubleNode( in smIdType theNodeId, in long_array theModifiedElems )
raises (SALOME::SALOME_Exception);
/*!
* \param groups - optional groups of 2D elements to make boundary around
* \param mesh - returns the mesh where elements were added to
* \param group - returns the created group, if any
- * \retval long - number of added boundary elements
+ * \retval smIdType - number of added boundary elements
*/
- long MakeBoundaryElements(in Bnd_Dimension dimension,
+ smIdType MakeBoundaryElements(in Bnd_Dimension dimension,
in string groupName,
in string meshName,
in boolean toCopyAll,
