#define _SMESH_MESH_IDL_
#include "SALOME_Exception.idl"
-//#include "SMESH_Hypothesis.idl"
-
#include "SALOME_GenericObj.idl"
-//#include "GEOM_Shape.idl"
-//#include "MED.idl"
module GEOM
{
- interface GEOM_Shape;
+ interface GEOM_Object;
};
typedef sequence<double> double_array ;
typedef sequence<long> long_array ;
typedef sequence<string> string_array ;
+ typedef sequence<long_array> array_of_long_array ;
enum log_command
{
ADD_PRISM,
ADD_HEXAHEDRON,
REMOVE_NODE,
- REMOVE_ELEMENT
+ REMOVE_ELEMENT,
+ MOVE_NODE,
+ CHANGE_ELEMENT_NODES,
+ RENUMBER
};
struct log_block
long_array indexes;
};
+ struct PointStruct { double x;
+ double y;
+ double z; } ;
+ struct DirStruct { PointStruct PS ; } ; // analog to Occ Direction
+
+ struct AxisStruct { double x;
+ double y;
+ double z;
+ double vx;
+ double vy;
+ double vz; } ;
+
/*!
* Enumeration for element type, like in SMDS
DRS_FAIL // general failure (exception etc.)
};
+ /*!
+ * Enumeration for DriverMED (used by Perform() method)
+ */
+ enum MED_VERSION // in the order of severity
+ {
+ MED_V2_1,
+ MED_V2_2
+ };
+
typedef sequence<log_block> log_array;
+
+ interface SMESH_IDSource
+ {
+ /*!
+ * Returns a sequence of all element IDs
+ */
+ long_array GetIDs();
+ };
+
+ interface SMESH_GroupBase;
interface SMESH_Group;
+ interface SMESH_GroupOnGeom;
interface SMESH_subMesh;
interface SMESH_MeshEditor;
- interface SMESH_Mesh : SALOME::GenericObj
+ interface SMESH_Mesh : SALOME::GenericObj, SMESH_IDSource
{
/*!
* Associate a Shape to a Mesh created with NewEmpty
*/
-// boolean SetMesh(in GEOM::GEOM_Shape aShape)
+// boolean SetMesh(in GEOM::GEOM_Object anObject)
// raises (SALOME::SALOME_Exception);
/*!
* SubMesh will be used instead of SubShape in a next idl version to
* adress a specific subMesh...
*/
- SMESH_subMesh GetSubMesh(in GEOM::GEOM_Shape aSubShape, in string name)
+ SMESH_subMesh GetSubMesh(in GEOM::GEOM_Object aSubObject, in string name)
raises (SALOME::SALOME_Exception);
/*!
// SMESH_subMesh NewEmpty()
// raises (SALOME::SALOME_Exception);
+ /*!
+ * Get geom shape to mesh. A result may be nil
+ */
+ GEOM::GEOM_Object GetShapeToMesh()
+ raises (SALOME::SALOME_Exception);
+
/*!
* Remove a submesh
*/
in string name )
raises (SALOME::SALOME_Exception);
+ /*!
+ * Create a group from geometry group
+ */
+ SMESH_GroupOnGeom CreateGroupFromGEOM( in ElementType elem_type,
+ in string name,
+ in GEOM::GEOM_Object theGeomObject )
+ raises (SALOME::SALOME_Exception);
+
/*!
* Remove a group
*/
- void RemoveGroup(in SMESH_Group aGroup)
+ void RemoveGroup(in SMESH_GroupBase aGroup)
raises (SALOME::SALOME_Exception);
+ /*!
+ * Remove group with its contents
+ */
+ void RemoveGroupWithContents( in SMESH_GroupBase aGroup )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Union of two groups
+ * New group is created. All mesh elements that are
+ * present in initial groups are added to the new one
+ */
+ SMESH_Group UnionGroups (in SMESH_GroupBase aGroup1,
+ in SMESH_GroupBase aGroup2,
+ in string name )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Intersection of two groups
+ * New group is created. All mesh elements that are
+ * present in both initial groups are added to the new one.
+ */
+ SMESH_Group IntersectGroups (in SMESH_GroupBase aGroup1,
+ in SMESH_GroupBase aGroup2,
+ in string name )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Cut of two groups
+ * New group is created. All mesh elements that are present in
+ * main group but do not present in tool group are added to the new one
+ */
+ SMESH_Group CutGroups (in SMESH_GroupBase aMainGroup,
+ in SMESH_GroupBase aToolGroup,
+ in string name )
+ raises (SALOME::SALOME_Exception);
+
/*!
* Add hypothesis to the mesh, under a particular subShape
* (or the main shape itself)
* (or one previous hypothesis on the subShape)
* raises exception if hypothesis has not been created
*/
- Hypothesis_Status AddHypothesis(in GEOM::GEOM_Shape aSubShape,
+ Hypothesis_Status AddHypothesis(in GEOM::GEOM_Object aSubObject,
in SMESH_Hypothesis anHyp)
raises (SALOME::SALOME_Exception);
// boolean AddHypothesis(in SMESH_subMesh aSubMesh, in SMESH_Hypothesis anHyp)
/*!
* Remove an hypothesis previouly added with AddHypothesis.
*/
- Hypothesis_Status RemoveHypothesis(in GEOM::GEOM_Shape aSubShape,
+ Hypothesis_Status RemoveHypothesis(in GEOM::GEOM_Object aSubObject,
in SMESH_Hypothesis anHyp)
raises (SALOME::SALOME_Exception);
// boolean RemoveHypothesis(in SMESH_subMesh aSubMesh,
/*!
* Get the list of hypothesis added on a subShape
*/
- ListOfHypothesis GetHypothesisList(in GEOM::GEOM_Shape aSubShape)
+ ListOfHypothesis GetHypothesisList(in GEOM::GEOM_Object aSubObject)
raises (SALOME::SALOME_Exception);
// ListOfHypothesis GetHypothesisList(in SMESH_subMesh aSubMesh)
// raises (SALOME::SALOME_Exception);
raises (SALOME::SALOME_Exception);
/*!
- * Export Mesh with DAT and MED Formats
+ * Export Mesh to different MED Formats
+ * @params
+ * - auto_groups : boolean parameter for creating/not creating
+ * the groups Group_On_All_Nodes, Group_On_All_Faces, ... ;
+ * the typical use is auto_groups=false.
+ * - theVersion : define the version of format of MED file, that will be created
*/
- void ExportDAT( in string file )
+ void ExportToMED( in string file, in boolean auto_groups, in MED_VERSION theVersion )
raises (SALOME::SALOME_Exception);
+ /*!
+ * Export Mesh to MED_V2_1 MED format
+ * Works, just the same as ExportToMED, with MED_VERSION parameter equal to MED_V2_1.
+ * The method is kept in order to support old functionality
+ */
void ExportMED( in string file, in boolean auto_groups )
raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Export Mesh to DAT, UNV and STL Formats
+ */
+ void ExportDAT( in string file )
+ raises (SALOME::SALOME_Exception);
void ExportUNV( in string file )
raises (SALOME::SALOME_Exception);
+ void ExportSTL( in string file, in boolean isascii )
+ raises (SALOME::SALOME_Exception);
/*!
* Get MED Mesh
long NbNodes()
raises (SALOME::SALOME_Exception);
+ long NbElements()
+ raises (SALOME::SALOME_Exception);
+
long NbEdges()
raises (SALOME::SALOME_Exception);
long NbSubMesh()
raises (SALOME::SALOME_Exception);
+ long_array GetElementsId()
+ raises (SALOME::SALOME_Exception);
+
+ long_array GetElementsByType( in ElementType theType )
+ raises (SALOME::SALOME_Exception);
+
+ long_array GetNodesId()
+ raises (SALOME::SALOME_Exception);
+
string Dump();
};
- interface SMESH_subMesh : SALOME::GenericObj
+ interface SMESH_subMesh : SALOME::GenericObj, SMESH_IDSource
{
/*!
*
/*!
*
*/
- long GetNumberOfNodes()
+ long GetNumberOfNodes( in boolean all )
raises (SALOME::SALOME_Exception);
/*!
long_array GetNodesId()
raises (SALOME::SALOME_Exception);
+ /*!
+ * Get geom shape the submesh is dedicated to
+ */
+ GEOM::GEOM_Object GetSubShape()
+ raises (SALOME::SALOME_Exception);
+
/*!
* Get SMESH_Mesh which stores nodes coordinates & elements definition
*/
};
/*
- * This interface makes modifications on the Mesh - removing elements and nodes
- */
+ * This interface makes modifications on the Mesh - removing elements and nodes etc.
+ */
+ interface NumericalFunctor;
interface SMESH_MeshEditor {
- boolean RemoveElements(in long_array IDsOfElements)
- raises (SALOME::SALOME_Exception);
+ boolean RemoveElements(in long_array IDsOfElements);
- boolean RemoveNodes(in long_array IDsOfNodes)
- raises (SALOME::SALOME_Exception);
+ boolean RemoveNodes(in long_array IDsOfNodes);
- boolean AddNode(in double x, in double y, in double z)
- raises (SALOME::SALOME_Exception);
+ boolean AddNode(in double x, in double y, in double z);
- boolean AddEdge(in long_array IDsOfNodes)
- raises (SALOME::SALOME_Exception);
+ boolean AddEdge(in long_array IDsOfNodes);
- boolean AddFace(in long_array IDsOfNodes)
- raises (SALOME::SALOME_Exception);
+ boolean AddFace(in long_array IDsOfNodes);
+
+ boolean AddVolume(in long_array IDsOfNodes);
+
+ boolean MoveNode(in long NodeID, in double x, in double y, in double z);
+
+ boolean InverseDiag(in long NodeID1, in long NodeID2);
+
+ boolean DeleteDiag(in long NodeID1, in long NodeID2);
+
+ boolean Reorient(in long_array IDsOfElements);
+
+ boolean ReorientObject(in SMESH_IDSource theObject);
+
+ boolean TriToQuad(in long_array IDsOfElements,
+ in NumericalFunctor Criterion,
+ in double MaxAngle);
+
+ boolean TriToQuadObject(in SMESH_IDSource theObject,
+ in NumericalFunctor Criterion,
+ in double MaxAngle);
+
+ boolean QuadToTri(in long_array IDsOfElements,
+ in NumericalFunctor Criterion);
+
+ boolean SplitQuad(in long_array IDsOfElements,
+ in boolean Diag13);
+
+ boolean SplitQuadObject(in SMESH_IDSource theObject,
+ in boolean Diag13);
+
+ enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH };
+
+ boolean Smooth(in long_array IDsOfElements,
+ in long_array IDsOfFixedNodes,
+ in long MaxNbOfIterations,
+ in double MaxAspectRatio,
+ in Smooth_Method Method);
+
+ boolean SmoothObject(in SMESH_IDSource theObject,
+ in long_array IDsOfFixedNodes,
+ in long MaxNbOfIterations,
+ in double MaxAspectRatio,
+ in Smooth_Method Method);
+
+ void RenumberNodes();
+
+ void RenumberElements();
+
+ void RotationSweep(in long_array IDsOfElements,
+ in AxisStruct Axix,
+ in double AngleInRadians,
+ in long NbOfSteps,
+ in double Tolerance);
+
+ void RotationSweepObject(in SMESH_IDSource theObject,
+ in AxisStruct Axix,
+ in double AngleInRadians,
+ in long NbOfSteps,
+ in double Tolerance);
+
+ void ExtrusionSweep(in long_array IDsOfElements,
+ in DirStruct StepVector,
+ in long NbOfSteps);
+
+ void ExtrusionSweepObject(in SMESH_IDSource theObject,
+ in DirStruct StepVector,
+ in long NbOfSteps);
+
+ enum Extrusion_Error {
+ EXTR_OK,
+ EXTR_NO_ELEMENTS,
+ EXTR_PATH_NOT_EDGE,
+ EXTR_BAD_PATH_SHAPE,
+ EXTR_BAD_STARTING_NODE,
+ EXTR_BAD_ANGLES_NUMBER,
+ EXTR_CANT_GET_TANGENT
+ };
+
+ Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements,
+ in SMESH_Mesh PathMesh,
+ in GEOM::GEOM_Object PathShape,
+ in long NodeStart,
+ in boolean HasAngles,
+ in double_array Angles,
+ in boolean HasRefPoint,
+ in PointStruct RefPoint);
+
+ Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject,
+ in SMESH_Mesh PathMesh,
+ in GEOM::GEOM_Object PathShape,
+ in long NodeStart,
+ in boolean HasAngles,
+ in double_array Angles,
+ in boolean HasRefPoint,
+ in PointStruct RefPoint);
+
+ enum MirrorType { POINT, AXIS, PLANE };
+
+ void Mirror (in long_array IDsOfElements,
+ in AxisStruct Mirror,
+ in MirrorType theMirrorType,
+ in boolean Copy);
+
+ void MirrorObject (in SMESH_IDSource theObject,
+ in AxisStruct Mirror,
+ in MirrorType theMirrorType,
+ in boolean Copy);
+
+ void Translate (in long_array IDsOfElements,
+ in DirStruct Vector,
+ in boolean Copy);
+
+ void TranslateObject (in SMESH_IDSource theObject,
+ in DirStruct Vector,
+ in boolean Copy);
+
+ void Rotate (in long_array IDsOfElements,
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in boolean Copy);
+
+ void RotateObject (in SMESH_IDSource theObject,
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in boolean Copy);
+
+ void FindCoincidentNodes (in double Tolerance,
+ out array_of_long_array GroupsOfNodes);
+
+ void MergeNodes (in array_of_long_array GroupsOfNodes);
+
+ void MergeEqualElements();
+
+ enum Sew_Error {
+ SEW_OK,
+ SEW_BORDER1_NOT_FOUND,
+ SEW_BORDER2_NOT_FOUND,
+ SEW_BOTH_BORDERS_NOT_FOUND,
+ SEW_BAD_SIDE_NODES,
+ SEW_VOLUMES_TO_SPLIT,
+ // for SewSideElements() only:
+ SEW_DIFF_NB_OF_ELEMENTS,
+ SEW_TOPO_DIFF_SETS_OF_ELEMENTS,
+ SEW_BAD_SIDE1_NODES,
+ SEW_BAD_SIDE2_NODES
+ };
+
+ Sew_Error SewFreeBorders (in long FirstNodeID1,
+ in long SecondNodeID1,
+ in long LastNodeID1,
+ in long FirstNodeID2,
+ in long SecondNodeID2,
+ in long LastNodeID2);
+
+ Sew_Error SewConformFreeBorders (in long FirstNodeID1,
+ in long SecondNodeID1,
+ in long LastNodeID1,
+ in long FirstNodeID2,
+ in long SecondNodeID2);
+
+ Sew_Error SewBorderToSide (in long FirstNodeIDOnFreeBorder,
+ in long SecondNodeIDOnFreeBorder,
+ in long LastNodeIDOnFreeBorder,
+ in long FirstNodeIDOnSide,
+ in long LastNodeIDOnSide);
+
+ Sew_Error SewSideElements (in long_array IDsOfSide1Elements,
+ in long_array IDsOfSide2Elements,
+ in long NodeID1OfSide1ToMerge,
+ in long NodeID1OfSide2ToMerge,
+ in long NodeID2OfSide1ToMerge,
+ in long NodeID2OfSide2ToMerge);
- boolean AddVolume(in long_array IDsOfNodes)
- raises (SALOME::SALOME_Exception);
};
};