-<ul>
-<li><b>Automatic Update</b></li>
-<ul>
-<li>If you toggle <b>Automatic Update</b> checkbox, the model in your
-viewer automatically updated whenever you make changes in it.</li>
-<li><b>Size limit (elements)</b> - allows to specify the maximum
-number of elements in the resulting mesh for which the automatic updating
-of the presentation is performed. This option affects only
-<b>Compute</b> operation. Zero value means "no limit". Default value
-is 500 000 mesh elements.
-</ul>
-<li><b>Quality Controls</b></li>
-<ul>
-<li>If you toggle <b>Display entity</b>, both faces and edges of an
-object will be displayed in the viewer by default.</li>
-<li>If you toggle <b>Use precision</b> checkbox, you can display numbers in
-<b>Quality Control</b> diagrams at the necessary level of precision.</li>
-<li><b>Number of digits after point</b> - defines precision for <b>Quality Controls</b>. By default, numbers in <b>Quality Control</b>
-diagrams are presented as integers.</li>
-<li><b>Double nodes tolerance</b> defines the maximal distance between two
-mesh nodes, at which they are considered coincident by <b>Double nodes</b>
-quality control.
-</ul>
-<li><b>Display mode</b> - allows to set Wireframe, Shading, Nodes or Shrink
-presentation mode as default.</li>
-<li><b>Representation of the 2D quadratic elements</b></li>
-<ul>
-<li><b>Representation of the 2D quadratic elements</b> combobox - allows
-to select lines or arcs for representation of quadratic elements.</li>
-<li><b>Maximum Angle</b> - maximum deviation angle used by the
-application to build arcs. </li>
-</ul>
-<li><b>Mesh export</b></li>
-<ul>
-<li>If you toggle <b>Automatically create groups for MED export</b> checkbox,
-this operation will be carried out automatically.</li>
-<li>If you toggle <b>Automatic renumbering</b> checkbox, the exported
-mesh will be renumbered automatically</li>
-</ul>
-<li><b>Mesh computation</b></li>
-<ul>
-<li><b>Show a computation result notification</b> combobox allows to
-select the notification mode about a mesh computation result.
-There are 3 possible modes:</li>
-<ul>
-<li><b>Never</b> - do not show the result dialog at all;</li>
-<li><b>Errors only</b> - the result dialog will be shown if there were
-some errors during a mesh computation;</li>
-<li><b>Always</b> - show the result dialog after each mesh
-computation. This is a default mode.</li>
-</ul></ul>
-<li><b>Mesh information</b></li>
-<ul>
-<li><b>Mesh element information</b></li> - Change the way mesh element
-information is shown:
-<ul>
-<li><b>Simple</b> - as a plain text</li>
-<li><b>Tree</b> - in a tree-like form</li>
-</ul>
-<li><b>Automatic nodes compute limit</b></li> - allows to define the size limit for the
-mesh groups for which the number of underlying nodes is calculated
-automatically. If the group size exceeds the value set in the preferences,
-the user will have to press \em Compute button explicitly. Zero value
-means "no limit". By default the value is set to 100 000 mesh elements.
-</li></ul>
-<li><b>Automatic Parameters</b></li>
-<ul>
-<li><b>Ratio Bounding Box Diagonal / Max Size</b> - this parameter is
-used for automatic meshing: ratio between the bounding box of the
-meshed object and the Max Size of segments.</li>
-<li><b>Default Number of Segments</b> - allows defining the default
-number of segments on each edge</li>
-</li></ul>
-<li><b>Mesh loading</b></li>
-<ul>
-<li>If <b>No mesh loading from study file at hypothesis modification</b>
- checkbox is on, the mesh data will not be loaded from the study file
- when a hypothesis is modified. This allows saving time by omitting
- loading data of a large mesh that is planned to be recomputed with other parameters.</li>
-</ul>
-<li><b>Input fields precision</b></li>
-<ul>
-<li><b>Length precision</b> - allows to adjust input precision of coordinates and dimensions.</li>
-<li><b>Angular precision</b> - allows to adjust input precision of angles.</li>
-<li><b>Length tolerance precision</b> - allows to adjust input precision of tolerance of coordinates and dimensions.</li>
-<li><b>Parametric precision</b> - allows to adjust input precision of parametric values.</li>
-<li><b>Area precision</b> - allows to adjust input precision of mesh element area.</li>
-<li><b>Volume precision</b> - allows to adjust input precision of mesh element volume.</li>
-</ul>
-<li><b>Python Dump</b></li>
-<ul>
-<li><b>Historical python dump</b> checkbox allows switching between
- \a Historical and \a Snapshot dump mode. In \a
- Historical mode, Python Dump script includes all commands
- performed by SMESH engine. In \a Snapshot mode, the commands
- relating to objects removed from the Study as well as the commands
- not influencing the current state of meshes are excluded from the script.</li>
-</ul>
-</ul>
+- <b>Automatic Update</b>
+ - If you toggle <b>Automatic Update</b> checkbox, the model in your
+ viewer will be automatically updated when you make changes in it, depending on
+ values of additional preferences specified below.
+ - <b>Size limit (elements)</b> - allows specifying the maximum
+ number of elements in the resulting mesh for which the automatic updating
+ of the presentation is performed. This option affects only
+ <b>Compute</b> operation. Zero value means "no limit". Default value
+ is 500 000 mesh elements.
+ - <b>Incremental limit check</b> - when this control is switched on,
+ the mesh size limit check is not applied to the total number of
+ elements in the resulting mesh, it is applied iteratively to each entity type
+ in the following order: 0D elements, edges, faces, volumes, balls.
+ At each step the number of entities of a certain type is added to the
+ total number of elements computed at the previous step - if the resulting
+ number of elements does not exceed the size limit, the entities of
+ this type are shown, otherwise the user is warned that some entities are not shown.
+
+- <b>Quality Controls</b>
+ - If you toggle <b>Display entity</b>, both faces and edges of an
+ object will be displayed in the viewer by default.
+ - If you toggle <b>Use precision</b> checkbox, you can display numbers in
+ <b>Quality Control</b> diagrams at the necessary level of precision.
+ - <b>Number of digits after point</b> - defines precision for
+ <b>Quality Controls</b>. By default, numbers in <b>Quality Control</b>
+ diagrams are presented as integers.
+ - <b>Double nodes tolerance</b> defines the maximal distance between two
+ mesh nodes, at which they are considered coincident by <b>Double nodes</b>
+ quality control.
+
+- <b>Display mode</b> - allows to set Wireframe, Shading, Nodes or Shrink
+ presentation mode as default.
+
+- <b>Representation of the 2D quadratic elements</b>
+ - <b>Representation of the 2D quadratic elements</b> combobox - allows
+ to select lines or arcs for representation of quadratic elements.
+ - <b>Maximum Angle</b> - maximum deviation angle used by the
+ application to build arcs.
+
+- <b>Mesh export</b>
+ - If you toggle <b>Automatically create groups for MED export</b> checkbox,
+ this operation will be carried out automatically.
+
+- <b>Mesh computation</b>
+ - <b>Show a computation result notification</b> combobox allows to
+ select the notification mode about a mesh computation result.
+ There are 3 possible modes:
+ - <b>Never</b> - do not show the result dialog at all;
+ - <b>Errors only</b> - the result dialog will be shown if there were
+ some errors during a mesh computation;
+ - <b>Always</b> - show the result dialog after each mesh
+ computation. This is a default mode.
+
+- <b>Mesh information</b>
+ - <b>Mesh element information</b> - change the way mesh element
+ information is shown:
+ - <b>Simple</b> - as a plain text
+ - <b>Tree</b> - in a tree-like form
+ - <b>Automatic nodes compute limit</b> - allows defining the size limit for the
+ mesh groups for which the number of underlying nodes is calculated
+ automatically. If the group size exceeds the value set in the preferences,
+ the user will have to press \em Compute button explicitly. Zero value
+ means "no limit". By default the value is set to 100 000 mesh elements.
+ - <b>Automatic controls compute limit</b> - allows defining the size limit for the
+ mesh elements for which the Aspect Ratio histogram is calculated
+ automatically. If the mesh elements size exceeds the value set in the preferences,
+ it is possible to press \b Compute button explicitly to calculate the histogram . Zero value
+ means "no limit". By default the value is set to 3 000 mesh elements.
+ - <b>Show details on groups in element information tab</b> - when
+ this option is switched off (default), only the names of groups, to which the node
+ or element belongs, are shown in the \ref mesh_element_info_anchor "Info Tab"
+ tab of "Mesh Information" dialog box. If this option is
+ switched on, the detailed information on groups is shown.
+ - <b>Dump base information</b> - allows dumping base mesh information to the
+ file, see \ref mesh_infos_page.
+ - <b>Dump element information</b> - allows dumping element information to the
+ file, see \ref mesh_infos_page.
+ - <b>Dump additional information</b> - allows dumping additional mesh
+ information to the file, see \ref mesh_infos_page.
+ - <b>Dump controls information</b> - allows dumping quality mesh
+ information to the file, see \ref mesh_infos_page.
+
+- <b>Automatic Parameters</b>
+ - <b>Ratio Bounding Box Diagonal / Max Size</b> - this parameter is
+ used for automatic meshing. This is the ratio between the bounding box of the
+ meshed object and the Max Size of segments.
+ - <b>Default Number of Segments</b> - defines the default
+ number of segments on each edge.
+
+- <b>Mesh loading</b>
+ - If <b>No mesh loading from study file at hypothesis modification</b>
+ check-box is on, the mesh data will not be loaded from the study file
+ when a hypothesis is modified. This allows saving time by omitting
+ loading data of a large mesh that is planned to be recomputed with other parameters.
+
+- <b>Input fields precision</b>
+ - <b>Length precision</b> - allows to adjust input precision of coordinates and dimensions.
+ - <b>Angular precision</b> - allows to adjust input precision of angles.
+ - <b>Length tolerance precision</b> - allows to adjust input precision of tolerance of coordinates and dimensions.
+ - <b>Parametric precision</b> - allows to adjust input precision of parametric values.
+ - <b>Area precision</b> - allows to adjust input precision of mesh element area.
+ - <b>Volume precision</b> - allows to adjust input precision of mesh element volume.
+
+- <b>Preview</b>
+ - <b>Sub-shapes preview chunk size</b> - allows to limit the number
+ of previewed sub-shapes shown in the hypotheses creation dialog boxes,
+ for example "Reverse Edges" parameter of \ref number_of_segments_anchor "Number of segments" hypothesis.
+
+- <b>Python Dump</b>
+ - <b>Historical python dump</b> checkbox allows switching between
+ \a Historical and \a Snapshot dump mode:
+ - In \a Historical mode, Python Dump script includes all commands
+ performed by SMESH engine.
+ - In \a Snapshot mode, the commands relating to objects removed
+ from the Study as well as the commands not influencing the
+ current state of meshes are excluded from the script.