Additional fix for issue 0020613: EDF 1106 : Modify Node Marker in SMESH and VISU

[modules/smesh.git] / doc / salome / gui / SMESH / input / 1d_meshing_hypo.doc

diff --git a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
index 7053546924bfff0525b9728b2dd3ffe029b4a75a..aba2b65986184721dc951a633b2a2e3e97f1ca69 100644 (file)
--- a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
+++ b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
@@ -11,6 +11,7 @@
 <li>\ref number_of_segments_anchor "Number of segments"</li>
 <li>\ref start_and_end_length_anchor "Start and end length"</li>
 <li>\ref automatic_length_anchor "Automatic Length"</li>
 <li>\ref number_of_segments_anchor "Number of segments"</li>
 <li>\ref start_and_end_length_anchor "Start and end length"</li>
 <li>\ref automatic_length_anchor "Automatic Length"</li>

+<li>\ref fixed_points_1d_anchor "Fixed points 1D"</li>

 </ul>
 
 <br>
 </ul>
 
 <br>


@@ -21,6 +22,12 @@
 length that changes in arithmetic progression (Lk = Lk-1 + d)
 beginning from a given starting length and up to a given end length.
 
 length that changes in arithmetic progression (Lk = Lk-1 + d)
 beginning from a given starting length and up to a given end length.
 

+The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
+<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
+in the direction opposing to their orientation. This list box is enabled only if the geometry object 
+is selected for the meshing. In this case the user can select edges to be reversed either directly 
+picking them in the 3D viewer or by selecting the edges or groups of edges in the Object browser.
+

 \image html a-arithmetic1d.png
 
 \image html b-ithmetic1d.png "Arithmetic 1D hypothesis - the size of mesh elements gradually increases"
 \image html a-arithmetic1d.png
 
 \image html b-ithmetic1d.png "Arithmetic 1D hypothesis - the size of mesh elements gradually increases"


@@ -106,6 +113,12 @@ edges generated by these segments will represent nodes of your
 mesh. Later these nodes will be used for meshing of the faces abutting
 to these edges.
 
 mesh. Later these nodes will be used for meshing of the faces abutting
 to these edges.
 

+The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
+<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
+in the direction opposing to their orientation. This list box is enabled only if the geometry object 
+is selected for the meshing. In this case the user can select edges to be reversed either directly 
+picking them in the 3D viewer or by selecting the edges or groups of edges in the Object browser.
+

 \image html image46.gif
 
 You can set the type of distribution for this hypothesis in the
 \image html image46.gif
 
 You can set the type of distribution for this hypothesis in the


@@ -149,6 +162,12 @@ geometric progression. Then mesh nodes are
 constructed at segment ends location and 1D mesh elements are
 constructed on them.
 
 constructed at segment ends location and 1D mesh elements are
 constructed on them.
 

+The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
+<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
+in the direction opposing to their orientation. This list box is enabled only if the geometry object 
+is selected for the meshing. In this case the user can select edges to be reversed either directly 
+picking them in the 3D viewer or by selecting the edges or groups of edges in the Object browser.
+

 \image html a-startendlength.png
 
 \image html b-art_end_length.png "The lengths of the first and the last segment are strictly defined"
 \image html a-startendlength.png
 
 \image html b-art_end_length.png "The lengths of the first and the last segment are strictly defined"


@@ -175,4 +194,32 @@ minimum and maximum value of this parameter.
 \image html image147.gif "Example of a very rough mesh. Automatic Length works for 0."
 
 \image html image148.gif "Example of a very fine mesh. Automatic Length works for 1."
 \image html image147.gif "Example of a very rough mesh. Automatic Length works for 0."
 
 \image html image148.gif "Example of a very fine mesh. Automatic Length works for 1."

+
+<br>
+\anchor fixed_points_1d_anchor
+<h2>Fixed points 1D hypothesis</h2>
+
+<b>Fixed points 1D</b> hypothesis allows splitting edges through a
+set of points parameterized on the edge (from 1 to 0) and a number of segments for each
+interval limited by the points.
+
+\image html hypo_fixedpnt_dlg.png 
+
+It is possible to check in <b>Same Nb. Segments for all intervals</b> 
+option and to define one value for all intervals.
+
+The splitting direction is defined by the orientation of the
+underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
+specify the edges for which the splitting should be made in the
+direction opposite to their orientation. This list box is enabled only
+if the geometrical object is selected for meshing. In this case it is
+possible to select the edges to be reversed either directly picking them in
+the 3D viewer or selecting the edges or groups of edges in the
+Object browser.
+
+\image html mesh_fixedpnt.png "Example of a submesh on the edge built using Fixed points 1D hypothesis"
+
+<b>See Also</b> a sample TUI Script of a 
+\ref tui_fixed_points "Defining Fixed Points" hypothesis operation.
+

 */
 */