53068: Create Mesh dialog box is frozen

[modules/smesh.git] / doc / salome / gui / SMESH / input / 1d_meshing_hypo.doc

diff --git a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
index 2ab53e44db9639ddb99279c3d31b8e2107fe886e..01deffbcd3dd5030cb77f5859b5571bc3367a912 100644 (file)
--- a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
+++ b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
@@ -144,12 +144,17 @@ composing your geometrical object. Definition of this hypothesis
 consists of setting the \b length of segments, which will approximate these
 edges, and the \b precision of rounding.
 
 consists of setting the \b length of segments, which will approximate these
 edges, and the \b precision of rounding.
 

-The \b precision parameter is used to round a number of segments,
-calculated by dividing the edge length by the specified \b length of
-segment, to the higher integer if the remainder exceeds the precision
-and to the lower integer otherwise. Use value 0.5 to provide rounding
-to the nearest integer, 1.0 for the lower integer, 0.0 for the higher
-integer. Default value is 1e-07.
+The \b precision parameter is used to round a <em>number of segments</em>,
+calculated by dividing the <em>edge length</em> by the specified \b length of
+segment, to the higher integer if the \a remainder exceeds the \b precision
+and to the lower integer otherwise. <br>
+Use value 0.5 to provide rounding to the nearest integer, 1.0 for the lower integer, 0.0 for the higher integer. Default value is 1e-07.
+
+For example: if <em>edge length</em> is 10.0 and the segment \b length
+is 3.0 then their division gives 10./3. = 3.33(3) and the \a remainder is 0.33(3).
+If \b precision is less than 0.33(3) then the edge is divided into 3 segments.
+If \b precision is more than 0.33(3) then the edge is divided into 4 segments.
+

 
 \image html image41.gif
 
 
 \image html image41.gif
 


@@ -236,7 +241,7 @@ in the plot the density function curve in red and the node
 distribution as blue crosses. The node distribution is computed in the
 same way as for 
 \ref analyticdensity_anchor "Distribution with Analytic Density". You
 distribution as blue crosses. The node distribution is computed in the
 same way as for 
 \ref analyticdensity_anchor "Distribution with Analytic Density". You

-can select the <b>Conversion mode</b> from\b Exponent and <b>Cut
+can select the <b>Conversion mode</b> from \b Exponent and <b>Cut

 negative</b>.
 
 \image html distributionwithtabledensity.png
 negative</b>.
 
 \image html distributionwithtabledensity.png


@@ -245,6 +250,7 @@ negative</b>.
 \ref tui_deflection_1d "Defining Number of Segments" hypothesis
 operation.
 
 \ref tui_deflection_1d "Defining Number of Segments" hypothesis
 operation.
 

+\note The plot functionality is available only if GUI module is built with Plot 2D Viewer (option SALOME_USE_PLOT2DVIEWER is ON when building GUI module).

 
 <br>
 \anchor start_and_end_length_anchor
 
 <br>
 \anchor start_and_end_length_anchor


@@ -338,16 +344,24 @@ geometrical model in the 3D Viewer, which can help to understand the
 location of a set of edges within the model.
 
 <b>Propagation chains</b> group allows defining <b>Reversed Edges</b>
 location of a set of edges within the model.
 
 <b>Propagation chains</b> group allows defining <b>Reversed Edges</b>

-for splitting opposite edges of quadrilateral faces
-in a logically uniform direction. When this group is
-activated, the list is filled with propagation chains found within the
-model. When a chain is selected in the list its edges are
-shown in the Viewer with arrows, which enables choosing a common
-direction for all chain edges. \b Reverse button inverts the common
-direction of chain edges. If \b Add button is active, some
-edges of a chain have a different direction, so you can click \b Add
-button to add them to <b>Reversed Edges</b> list.
+for splitting opposite edges of quadrilateral faces in a logically
+uniform direction. When this group is activated, the list is filled
+with propagation chains found within the shape on which a hypothesis
+is assigned. When a chain is selected in the list its edges are shown
+in the Viewer with arrows, which enables choosing a common direction
+for all chain edges. \b Reverse button inverts the common direction of
+chain edges. \b Add button is active if some edges of a chain have a
+different direction, so you can click \b Add button to add them
+to <b>Reversed Edges</b> list.

 
 \image html propagation_chain.png "The whole geometry and a propagation chain"
 
 
 \image html propagation_chain.png "The whole geometry and a propagation chain"
 

+\note Alternatively, uniform direction of edges of one propagation
+chain can be achieved by 
+\ref constructing_submeshes_page "definition of a sub-mesh" on one
+edge of the chain and assigning a 
+\ref propagation_anchor "Propagation" additional hypothesis.
+Orientation of this edge (and hence of all the rest edges of the chain) can be
+controlled by using <b>Reversed Edges</b> field.
+

 */
 */