#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
+"""Géométries nécessaires aux cas-tests :
+. cylindre
+. cylindre_2
+"""
+
+import os
+import math
import logging
-import sys
import salome
+from salome.smesh import smeshBuilder
+import GEOM
+import SMESH
+import SALOMEDS
-salome.salome_init()
-
-import salome_notebook
-notebook = salome_notebook.notebook
-
-import os
from blocFissure import gmu
+from blocFissure.gmu.geomsmesh import geompy
+from blocFissure.gmu.geomsmesh import geomPublish
+from blocFissure.gmu.geomsmesh import geomPublishInFather
+
+from blocFissure.gmu.triedreBase import triedreBase
+from blocFissure.gmu.putName import putName
+from blocFissure.gmu import initLog
###
### GEOM component
###
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
+O, OX, OY, OZ = triedreBase()
-geompy = geomBuilder.New()
-
-O = geompy.MakeVertex(0, 0, 0)
-OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-O_1 = geompy.MakeVertex(0, 0, 0)
-OX_1 = geompy.MakeVectorDXDYDZ(1, 0, 0)
-OY_1 = geompy.MakeVectorDXDYDZ(0, 1, 0)
-OZ_1 = geompy.MakeVectorDXDYDZ(0, 0, 1)
Vertex_1 = geompy.MakeVertex(0, 0, 500)
Vertex_2 = geompy.MakeVertex(100, 0, 500)
Vertex_3 = geompy.MakeVertex(110, 0, 500)
Mirror_1_8 = geompy.MakeMirrorByPlane(Vertex_9, Plane_1)
Mirror_1_9 = geompy.MakeMirrorByPlane(Vertex_10, Plane_1)
Curve_2 = geompy.MakeInterpol([Mirror_1_9, Mirror_1_8, Mirror_1_7, Mirror_1_6, Mirror_1_5, Mirror_1_4, Mirror_1_3, Mirror_1_2, Mirror_1_1, Vertex_1, Vertex_2, Vertex_3, Vertex_4, Vertex_5, Vertex_6, Vertex_7, Vertex_8, Vertex_9, Vertex_10], False, False)
+Divided_Cylinder_1 = geompy.MakeDividedCylinder(145, 800, GEOM.SQUARE)
+CylindreSain = geompy.MakeRotation(Divided_Cylinder_1, OZ, 45*math.pi/180.0)
+[Compound_1, vertical, radial, Compound_4] = geompy.Propagate(CylindreSain)
+geompy.addToStudy( CylindreSain, 'CylindreSain' )
+geomPublishInFather(initLog.debug,CylindreSain, Compound_1, 'Compound_1' )
+geompy.addToStudyInFather(CylindreSain, vertical, 'vertical' )
+geompy.addToStudyInFather(CylindreSain, radial, 'radial' )
+geompy.addToStudyInFather(CylindreSain, Compound_4, 'Compound_4' )
+
Circle_1 = geompy.MakeCircle(Vertex_1, None, 145)
Vertex_11 = geompy.MakeVertex(0, -165, 500)
Curve_2_vertex_2 = geompy.GetSubShape(Curve_2, [2])
Curve_2_vertex_3 = geompy.GetSubShape(Curve_2, [3])
Arc_1 = geompy.MakeArc(Curve_2_vertex_2, Vertex_11, Curve_2_vertex_3)
FissInCylindre = geompy.MakeFaceWires([Curve_2, Arc_1], 1)
-Divided_Cylinder_1 = geompy.MakeDividedCylinder(145, 800, GEOM.SQUARE)
-CylindreSain = geompy.MakeRotation(Divided_Cylinder_1, OZ, 45*math.pi/180.0)
-[Compound_1, vertical, radial, Compound_4] = geompy.Propagate(CylindreSain)
+geompy.addToStudy( FissInCylindre, 'cylindre_fissure' )
+
geompy.ExportBREP(FissInCylindre, os.path.join(gmu.pathBloc, "materielCasTests", "FissInCylindre.brep"))
+
Vertex_12 = geompy.MakeVertex(0, -145, 500)
Circle_2 = geompy.MakeCircle(Vertex_12, None, 145)
Face_1 = geompy.MakeFaceWires([Circle_2], 1)
Vertex_13 = geompy.MakeVertex(0, 0, 500)
-Disk_1 = geompy.MakeDiskPntVecR(Vertex_13, OZ_1, 170)
+Disk_1 = geompy.MakeDiskPntVecR(Vertex_13, OZ, 170)
FissInCylindre2 = geompy.MakeCommon(Face_1, Disk_1)
+geompy.addToStudy( FissInCylindre2, 'cylindre_2_fissure' )
+
geompy.ExportBREP(FissInCylindre2, os.path.join(gmu.pathBloc, "materielCasTests", "FissInCylindre2.brep"))
-geompy.addToStudy( O, 'O' )
-geompy.addToStudy( OX, 'OX' )
-geompy.addToStudy( OY, 'OY' )
-geompy.addToStudy( OZ, 'OZ' )
-geompy.addToStudy( O_1, 'O' )
-geompy.addToStudy( OX_1, 'OX' )
-geompy.addToStudy( OY_1, 'OY' )
-geompy.addToStudy( OZ_1, 'OZ' )
-geompy.addToStudy( Vertex_1, 'Vertex_1' )
-geompy.addToStudy( Vertex_2, 'Vertex_2' )
-geompy.addToStudy( Vertex_3, 'Vertex_3' )
-geompy.addToStudy( Vertex_4, 'Vertex_4' )
-geompy.addToStudy( Vertex_5, 'Vertex_5' )
-geompy.addToStudy( Vertex_6, 'Vertex_6' )
-geompy.addToStudy( Vertex_7, 'Vertex_7' )
-geompy.addToStudy( Vertex_8, 'Vertex_8' )
-geompy.addToStudy( Vertex_9, 'Vertex_9' )
-geompy.addToStudy( Vertex_10, 'Vertex_10' )
-geompy.addToStudy( Plane_1, 'Plane_1' )
-geompy.addToStudy( Mirror_1_1, 'Mirror_1_1' )
-geompy.addToStudy( Mirror_1_2, 'Mirror_1_2' )
-geompy.addToStudy( Mirror_1_3, 'Mirror_1_3' )
-geompy.addToStudy( Mirror_1_4, 'Mirror_1_4' )
-geompy.addToStudy( Mirror_1_5, 'Mirror_1_5' )
-geompy.addToStudy( Mirror_1_6, 'Mirror_1_6' )
-geompy.addToStudy( Mirror_1_7, 'Mirror_1_7' )
-geompy.addToStudy( Mirror_1_8, 'Mirror_1_8' )
-geompy.addToStudy( Mirror_1_9, 'Mirror_1_9' )
-geompy.addToStudy( Curve_2, 'Curve_2' )
-geompy.addToStudy( Circle_1, 'Circle_1' )
-geompy.addToStudy( Vertex_11, 'Vertex_11' )
-geompy.addToStudyInFather( Curve_2, Curve_2_vertex_2, 'Curve_2:vertex_2' )
-geompy.addToStudyInFather( Curve_2, Curve_2_vertex_3, 'Curve_2:vertex_3' )
-geompy.addToStudy( Arc_1, 'Arc_1' )
-geompy.addToStudy( FissInCylindre, 'FissInCylindre' )
-geompy.addToStudy( Divided_Cylinder_1, 'Divided Cylinder_1' )
-geompy.addToStudy( CylindreSain, 'CylindreSain' )
-geompy.addToStudyInFather( CylindreSain, Compound_1, 'Compound_1' )
-geompy.addToStudyInFather( CylindreSain, vertical, 'vertical' )
-geompy.addToStudyInFather( CylindreSain, radial, 'radial' )
-geompy.addToStudyInFather( CylindreSain, Compound_4, 'Compound_4' )
-geompy.addToStudy( Vertex_12, 'Vertex_12' )
-geompy.addToStudy( Circle_2, 'Circle_2' )
-geompy.addToStudy( Face_1, 'Face_1' )
-geompy.addToStudy( Vertex_13, 'Vertex_13' )
-geompy.addToStudy( Disk_1, 'Disk_1' )
-geompy.addToStudy( FissInCylindre2, 'FissInCylindre2' )
+
+geomPublish(initLog.debug, Vertex_1, 'Vertex_1' )
+geomPublish(initLog.debug, Vertex_2, 'Vertex_2' )
+geomPublish(initLog.debug, Vertex_3, 'Vertex_3' )
+geomPublish(initLog.debug, Vertex_4, 'Vertex_4' )
+geomPublish(initLog.debug, Vertex_5, 'Vertex_5' )
+geomPublish(initLog.debug, Vertex_6, 'Vertex_6' )
+geomPublish(initLog.debug, Vertex_7, 'Vertex_7' )
+geomPublish(initLog.debug, Vertex_8, 'Vertex_8' )
+geomPublish(initLog.debug, Vertex_9, 'Vertex_9' )
+geomPublish(initLog.debug, Vertex_10, 'Vertex_10' )
+geomPublish(initLog.debug, Plane_1, 'Plane_1' )
+geomPublish(initLog.debug, Mirror_1_1, 'Mirror_1_1' )
+geomPublish(initLog.debug, Mirror_1_2, 'Mirror_1_2' )
+geomPublish(initLog.debug, Mirror_1_3, 'Mirror_1_3' )
+geomPublish(initLog.debug, Mirror_1_4, 'Mirror_1_4' )
+geomPublish(initLog.debug, Mirror_1_5, 'Mirror_1_5' )
+geomPublish(initLog.debug, Mirror_1_6, 'Mirror_1_6' )
+geomPublish(initLog.debug, Mirror_1_7, 'Mirror_1_7' )
+geomPublish(initLog.debug, Mirror_1_8, 'Mirror_1_8' )
+geomPublish(initLog.debug, Mirror_1_9, 'Mirror_1_9' )
+geomPublish(initLog.debug, Curve_2, 'Curve_2' )
+geomPublish(initLog.debug, Circle_1, 'Circle_1' )
+geomPublish(initLog.debug, Vertex_11, 'Vertex_11' )
+geomPublishInFather(initLog.debug, Curve_2, Curve_2_vertex_2, 'Curve_2:vertex_2' )
+geomPublishInFather(initLog.debug, Curve_2, Curve_2_vertex_3, 'Curve_2:vertex_3' )
+geomPublish(initLog.debug, Arc_1, 'Arc_1' )
+geomPublish(initLog.debug, FissInCylindre, 'FissInCylindre' )
+geomPublish(initLog.debug, Divided_Cylinder_1, 'Divided Cylinder_1' )
+geomPublish(initLog.debug, Vertex_12, 'Vertex_12' )
+geomPublish(initLog.debug, Circle_2, 'Circle_2' )
+geomPublish(initLog.debug, Face_1, 'Face_1' )
+geomPublish(initLog.debug, Vertex_13, 'Vertex_13' )
+geomPublish(initLog.debug, Disk_1, 'Disk_1' )
+geomPublish(initLog.debug, FissInCylindre2, 'FissInCylindre2' )
###
### SMESH component
###
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-
smesh = smeshBuilder.New()
-from salome.StdMeshers import StdMeshersBuilder
-smeshObj_1 = smesh.CreateHypothesis('NumberOfSegments')
-smeshObj_1.SetNumberOfSegments( 5 )
-smeshObj_1.SetDistrType( 0 )
CylindreSain_1 = smesh.Mesh(CylindreSain)
-smesh.SetName(CylindreSain_1, 'CylindreSain')
+putName(CylindreSain_1.GetMesh(), 'CylindreSain')
+
Regular_1D = CylindreSain_1.Segment()
Nb_Segments_1 = Regular_1D.NumberOfSegments(15,[],[ ])
Nb_Segments_1.SetDistrType( 0 )
Nb_Segments_3 = Regular_1D_2.NumberOfSegments(6,[],[ ])
Nb_Segments_3.SetDistrType( 0 )
+## set object names
+#smesh.SetName(Regular_1D.GetAlgorithm(), 'Regular_1D')
+#smesh.SetName(Quadrangle_2D.GetAlgorithm(), 'Quadrangle_2D')
+#smesh.SetName(Hexa_3D.GetAlgorithm(), 'Hexa_3D')
+putName(Nb_Segments_1, 'Nb. Segments_1', i_pref='cylindre')
+putName(Nb_Segments_2, 'Nb. Segments_2', i_pref='cylindre')
+putName(Nb_Segments_3, 'Nb. Segments_3', i_pref='cylindre')
+
is_done = CylindreSain_1.Compute()
text = "CylindreSain_1.Compute"
if is_done:
raise Exception(text)
CylindreSain_1.ExportMED(os.path.join(gmu.pathBloc, "materielCasTests", "CylindreSain.med"))
-SubMesh_1 = Regular_1D_1.GetSubMesh()
-SubMesh_2 = Regular_1D_2.GetSubMesh()
-
-## some objects were removed
-aStudyBuilder = salome.myStudy.NewBuilder()
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_1))
-if SO is not None: aStudyBuilder.RemoveObjectWithChildren(SO)
-## set object names
-smesh.SetName(CylindreSain_1.GetMesh(), 'CylindreSain')
-smesh.SetName(Regular_1D.GetAlgorithm(), 'Regular_1D')
-smesh.SetName(Nb_Segments_1, 'Nb. Segments_1')
-smesh.SetName(Quadrangle_2D.GetAlgorithm(), 'Quadrangle_2D')
-smesh.SetName(Hexa_3D.GetAlgorithm(), 'Hexa_3D')
-smesh.SetName(Nb_Segments_2, 'Nb. Segments_2')
-smesh.SetName(Nb_Segments_3, 'Nb. Segments_3')
-smesh.SetName(SubMesh_1, 'SubMesh_1')
-smesh.SetName(SubMesh_2, 'SubMesh_2')
if salome.sg.hasDesktop():
salome.sg.updateObjBrowser()
