New updated and tested smesh.py with some examples. Provided by FKL.

[modules/smesh.git] / src / SMESH_SWIG / cyl2complementary.py

diff --git a/src/SMESH_SWIG/cyl2complementary.py b/src/SMESH_SWIG/cyl2complementary.py
deleted file mode 100644 (file)
index 70a41a9..0000000
--- a/src/SMESH_SWIG/cyl2complementary.py
+++ /dev/null
@@ -1,102 +0,0 @@
-# CEA/LGLS 2004, Francis KLOSS (OCC)
-# ==================================
-
-# Import
-# ------
-
-from geompy import *
-from meshpy import *
-
-# Piece
-# -----
-
-# Create the hexahedrical block geometry of a holed parallelepipede.
-# The hole has a T form composed by 2 cylinders with different radius, and their axis are normal.
-# This piece is meshed in hexahedrical.
-
-gx = 0
-gy = 0
-gz = 0
-
-g_dx = 250
-g_dy = 200
-g_dz = 150
-
-g_rayonGrand = 70
-g_rayonPetit = 50
-
-g_trim = 1000
-
-# Geometry
-# ========
-
-# The parallelepipede
-# -------------------
-
-p_boite = MakeBox(gx-g_dx, gy-g_dy, gz-g_dz,  gx+g_dx, gy+g_dy, gz+g_dz)
-
-# The great cylinder
-# ------------------
-
-g_base = MakeVertex(gx-g_dx, gy, gz)
-g_dir  = MakeVectorDXDYDZ(1, 0, 0)
-g_cyl  = MakeCylinder(g_base, g_dir, g_rayonGrand, g_dx*2)
-
-# The first hole
-# --------------
-
-b_boite = MakeCut(p_boite , g_cyl)
-
-# Partitioning
-# ------------
-
-p_base = MakeVertex(gx, gy, gz)
-
-p_tools = []
-
-p_tools.append(MakePlane(p_base, MakeVectorDXDYDZ(0,  1   , 0   ), g_trim))
-p_tools.append(MakePlane(p_base, MakeVectorDXDYDZ(0,  g_dz, g_dy), g_trim))
-p_tools.append(MakePlane(p_base, MakeVectorDXDYDZ(0, -g_dz, g_dy), g_trim))
-
-p_tools.append(MakePlane(MakeVertex(gx-g_rayonPetit, gy, gz), g_dir, g_trim))
-p_tools.append(MakePlane(MakeVertex(gx+g_rayonPetit, gy, gz), g_dir, g_trim))
-
-p_piece = MakePartition([b_boite], p_tools, [], [], ShapeType["SOLID"])
-
-# The small cylinder
-# ------------------
-
-c_cyl = MakeCylinder(p_base, MakeVectorDXDYDZ(0, 0, 1), g_rayonPetit, g_dz)
-
-# The second hole
-# ---------------
-
-d_element = SubShapeAllSorted(p_piece, ShapeType["SOLID"])
-
-d_element[ 8] = MakeCut(d_element[ 8], c_cyl)
-d_element[10] = MakeCut(d_element[10], c_cyl)
-
-# Compound
-# --------
-
-comp_all = MakeCompound(d_element)
-piece = BlocksOp.RemoveExtraEdges(comp_all)
-#piece = MakeCompound(d_element)
-
-# Add piece in study
-# ------------------
-
-piece_id = addToStudy(piece, "BoxHoled2Cylinders")
-
-# Meshing
-# =======
-
-# Mesh with hexahedrons
-# ---------------------
-
-m_hexa=MeshHexa(piece, 4, "BoxHoled2CylindersHexa")
-
-# Compute mesh
-# ------------
-
-m_hexa.Compute()