--- /dev/null
+# -*- coding: utf-8 -*-
+
+###
+### This file is generated automatically by SALOME v7.7.1 with dump python functionality
+###
+
+import sys, numpy
+import salome
+
+salome.salome_init()
+theStudy = salome.myStudy
+
+import salome_notebook
+notebook = salome_notebook.NoteBook(theStudy)
+
+###
+### GEOM component
+###
+
+import GEOM
+from salome.geom import geomBuilder
+import math
+import SALOMEDS
+import utilityFunctions as uF
+from output import message
+
+#import GEOM_Gen.ild
+#rectangle.generate(data_longueur,data_largeur,data_centre,data_normale,data_direction,data_angle,data_rayon,rayon_entaille,extension,outFile)
+
+def generate(data_longueur,data_largeur,data_centre,
+ data_normale,data_direction,data_angle,
+ data_rayon,rayon_entaille,outFile):
+
+#data_longueur = 2.
+#data_largeur = 1.
+#data_centre = [0., 0., 0.]
+#data_normale = [1., 2., 0.]
+#data_direction = [0., 1., 5.]
+#rayon_entaille=0.1
+#data_angle=180.
+#data_rayon=0.1
+#extension=0.1
+ #epsilon=numpy.max([data_longueur,data_largeur])*1.e-8
+ Brayon = data_rayon>1e-12
+ Bentaille = rayon_entaille>1e-12
+
+ A=numpy.pi/(15.)
+ maxSize=numpy.min([data_longueur,data_largeur])/4.
+ if Bentaille:
+ dim=3
+ if Brayon:
+ R=numpy.min([data_rayon,rayon_entaille])
+ chordal, minSize = uF.calcElemSize(A, R)
+ else:
+ chordal, minSize = uF.calcElemSize(A, rayon_entaille)
+ else:
+ dim=2
+ if Brayon:
+ chordal, minSize = uF.calcElemSize(A, data_rayon)
+ else:
+ minSize=numpy.min([data_longueur,data_largeur])/10.
+ maxSize=minSize
+ chordal=1.
+
+ Vnormale, Vdirection, Vortho = uF.calcCoordVectors(data_normale, data_direction)
+ Vcentre = numpy.array(data_centre)
+
+ geompy = geomBuilder.New(theStudy)
+
+ O = geompy.MakeVertex(0, 0, 0)
+ OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
+ OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
+ OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
+ CENTRE = geompy.MakeVertex(Vcentre[0], Vcentre[1], Vcentre[2])
+ NORMALE = geompy.MakeVectorDXDYDZ(Vnormale[0], Vnormale[1], Vnormale[2])
+ DIRECTION = geompy.MakeVectorDXDYDZ(Vdirection[0], Vdirection[1], Vdirection[2])
+ DIRECTION_op = geompy.MakeVectorDXDYDZ(-Vdirection[0], -Vdirection[1], -Vdirection[2])
+ V3 = geompy.MakeVectorDXDYDZ(Vortho[0], Vortho[1], Vortho[2])
+ V3_op = geompy.MakeVectorDXDYDZ(-Vortho[0], -Vortho[1], -Vortho[2])
+
+ VP1=Vcentre+Vdirection*data_longueur+Vortho*data_largeur
+ VP2=Vcentre-Vdirection*data_longueur+Vortho*data_largeur
+ VP3=Vcentre-Vdirection*data_longueur-Vortho*data_largeur
+ VP4=Vcentre+Vdirection*data_longueur-Vortho*data_largeur
+
+ Sommet_1 = geompy.MakeVertex(VP1[0], VP1[1], VP1[2])
+ Sommet_2 = geompy.MakeVertex(VP2[0], VP2[1], VP2[2])
+ Sommet_3 = geompy.MakeVertex(VP3[0], VP3[1], VP3[2])
+ Sommet_4 = geompy.MakeVertex(VP4[0], VP4[1], VP4[2])
+
+ Ligne_1 = geompy.MakeLineTwoPnt(Sommet_1, Sommet_2)
+ Ligne_2 = geompy.MakeLineTwoPnt(Sommet_2, Sommet_3)
+ Ligne_3 = geompy.MakeLineTwoPnt(Sommet_3, Sommet_4)
+ Ligne_4 = geompy.MakeLineTwoPnt(Sommet_4, Sommet_1)
+
+ Contour_1 = geompy.MakeWire([Ligne_1, Ligne_2, Ligne_3, Ligne_4], 1e-07)
+
+ if Brayon or Bentaille:
+ vertexOfRect=geompy.SubShapeAllIDs(Contour_1, geompy.ShapeType["VERTEX"])
+ Contour_1 = geompy.MakeFillet1D(Contour_1, data_rayon + rayon_entaille, vertexOfRect)
+
+ if not Bentaille:
+ RECTANGLE = geompy.MakeFaceWires([Contour_1], 1)
+ else:
+ VP1=Vcentre+Vdirection*(data_longueur-rayon_entaille)+Vnormale*rayon_entaille
+ VP2=Vcentre+Vdirection*(data_longueur)
+ VP3=Vcentre+Vdirection*(data_longueur-rayon_entaille)-Vnormale*rayon_entaille
+ PE1=geompy.MakeVertex(VP1[0], VP1[1], VP1[2])
+ PE2=geompy.MakeVertex(VP2[0], VP2[1], VP2[2])
+ PE3=geompy.MakeVertex(VP3[0], VP3[1], VP3[2])
+ ARC = geompy.MakeArc(PE1, PE2, PE3)
+ TUYAU = geompy.MakePipe(ARC, Contour_1)
+ subShapesList=geompy.GetFreeBoundary(TUYAU)[1]
+ entailleFace1 = geompy.MakeFaceWires([subShapesList[0]], 1)
+ entailleFace2 = geompy.MakeFaceWires([subShapesList[1]], 1)
+ RECTANGLE = geompy.MakeShell([TUYAU, entailleFace1, entailleFace2])
+
+ #edgesIDs = geompy.SubShapeAllIDs(RECTANGLE, geompy.ShapeType["EDGE"])
+ #edges = geompy.CreateGroup(RECTANGLE, geompy.ShapeType["EDGE"])
+ #geompy.UnionIDs(edges, edgesIDs)
+ #geompy.addToStudy( RECTANGLE, 'RECTANGLE' )
+ #geompy.addToStudyInFather( RECTANGLE , edges, 'edges' )
+
+ hauteur=data_longueur*1.1
+
+ eps=1.E-05
+ bool_boite=True
+ extrusion=numpy.max([1.,rayon_entaille])*1.1
+
+ if ( (data_angle>(eps)) and (data_angle<(180.-eps)) ):
+ rayon2=hauteur*numpy.tan(data_angle*numpy.pi/180./2.)
+
+ B1=geompy.MakeTranslationVectorDistance(CENTRE,DIRECTION,hauteur)
+ B2=geompy.MakeTranslationVectorDistance(B1,V3,rayon2)
+ geompy.TranslateVectorDistance(B1,V3_op,rayon2, False)
+ LB01 = geompy.MakeLineTwoPnt(CENTRE, B1)
+ LB02 = geompy.MakeLineTwoPnt(CENTRE, B2)
+ LB12 = geompy.MakeLineTwoPnt(B1, B2)
+ plan_BOITE = geompy.MakeFaceWires([LB01, LB02, LB12], True)
+ extrusion=numpy.max([1.,rayon_entaille])*1.1
+ BOITE = geompy.MakePrismVecH2Ways(plan_BOITE, NORMALE, extrusion)
+
+ FACE_FISSURE = geompy.MakeCommonList([RECTANGLE, BOITE])
+
+ elif ( (data_angle>=(180.-eps)) and (data_angle<=(180.+eps)) ):
+ VP1=Vcentre+Vortho*data_largeur*1.1
+ VP2=Vcentre-Vortho*data_largeur*1.1
+ VP3=Vcentre-Vortho*data_largeur*1.1+Vdirection*data_longueur*1.1
+ VP4=Vcentre+Vortho*data_largeur*1.1+Vdirection*data_longueur*1.1
+
+ Sommet_5 = geompy.MakeVertex(VP1[0], VP1[1], VP1[2])
+ Sommet_6 = geompy.MakeVertex(VP2[0], VP2[1], VP2[2])
+ Sommet_7 = geompy.MakeVertex(VP3[0], VP3[1], VP3[2])
+ Sommet_8 = geompy.MakeVertex(VP4[0], VP4[1], VP4[2])
+
+ Ligne_5 = geompy.MakeLineTwoPnt(Sommet_5, Sommet_6)
+ Ligne_6 = geompy.MakeLineTwoPnt(Sommet_6, Sommet_7)
+ Ligne_7 = geompy.MakeLineTwoPnt(Sommet_7, Sommet_8)
+ Ligne_8 = geompy.MakeLineTwoPnt(Sommet_8, Sommet_5)
+
+ Contour_2 = geompy.MakeWire([Ligne_5, Ligne_6, Ligne_7, Ligne_8], 1e-07)
+ Face_2 = geompy.MakeFaceWires([Contour_2], 1)
+ BOITE = geompy.MakePrismVecH2Ways(Face_2, NORMALE, extrusion)
+ FACE_FISSURE = geompy.MakeCommonList([RECTANGLE, BOITE])
+
+ #geompy.addToStudy( RECTANGLE, 'RECTANGLE' )
+ #geompy.addToStudy( BOITE, 'BOITE' )
+ #geompy.addToStudy( FACE_FISSURE, 'FACE_FISSURE' )
+
+ elif ( (data_angle>(180.+eps)) and (data_angle<(360.-eps)) ):
+ rayon2=hauteur*numpy.tan((360.-data_angle)*numpy.pi/180./2.)
+ B1=geompy.MakeTranslationVectorDistance(CENTRE,DIRECTION_op,hauteur)
+ B2=geompy.MakeTranslationVectorDistance(B1,V3,rayon2)
+ geompy.TranslateVectorDistance(B1,V3_op,rayon2, False)
+ LB01 = geompy.MakeLineTwoPnt(CENTRE, B1)
+ LB02 = geompy.MakeLineTwoPnt(CENTRE, B2)
+ LB12 = geompy.MakeLineTwoPnt(B1, B2)
+ plan_BOITE = geompy.MakeFaceWires([LB01, LB02, LB12], True)
+ extrusion=numpy.max([1.,rayon_entaille])*1.1
+ BOITE = geompy.MakePrismVecH2Ways(plan_BOITE, NORMALE, extrusion)
+ FACE_FISSURE = geompy.MakeCutList(RECTANGLE, [BOITE])
+
+ elif ( (data_angle<=(eps)) or (data_angle>=(360.-eps)) ):
+ bool_boite=False
+ FACE_FISSURE = RECTANGLE
+
+ else:
+ message('E','Angle non prevu')
+
+ #if bool_boite:
+ #newEdgesIDs = geompy.SubShapeAllIDs(FACE_FISSURE, geompy.ShapeType["EDGE"])
+ #newEdges = geompy.CreateGroup(FACE_FISSURE, geompy.ShapeType["EDGE"])
+ #geompy.UnionIDs(newEdges, newEdgesIDs)
+
+ #[oldEdges] = geompy.RestoreGivenSubShapes(FACE_FISSURE, [RECTANGLE, edges], GEOM.FSM_GetInPlace, True, False)
+
+ #toExtrude = geompy.CutListOfGroups([newEdges], [oldEdges])
+
+ #if extension>1.e-12:
+ #extrusion = geompy.MakePrismVecH(toExtrude, DIRECTION_op, extension)
+ #try:
+ #FACE_FISSURE = geompy.MakeFuseList([FACE_FISSURE, extrusion], False, True)
+ #except:
+ #FACE_FISSURE = geompy.MakeFuseList([FACE_FISSURE, extrusion], False, False)
+
+ #geompy.addToStudy( FACE_FISSURE, 'FACE_FISSURE' )
+
+ #
+ # SMESH component
+ #
+
+ import SMESH, SALOMEDS
+ from salome.smesh import smeshBuilder
+ smesh = smeshBuilder.New(theStudy)
+
+ Maillage=uF.meshCrack(FACE_FISSURE, minSize, maxSize, chordal, dim)
+
+ try:
+ Maillage.ExportMED( outFile, 0, SMESH.MED_V2_2, 1, None ,1)
+ smesh.SetName(Maillage.GetMesh(), 'MAILLAGE_FISSURE')
+ except:
+ print 'ExportToMEDX() failed. Invalid file name?'
+
+
+ if salome.sg.hasDesktop():
+ salome.sg.updateObjBrowser(1)