--- /dev/null
+# -*- coding: utf-8 -*-
+
+###
+### This file is generated automatically by SALOME v7.7.1 with dump python functionality
+###
+
+
+import sys, numpy
+import salome
+
+salome.salome_init()
+theStudy = salome.myStudy
+
+import salome_notebook
+notebook = salome_notebook.NoteBook(theStudy)
+
+###
+### GEOM component
+###
+
+import GEOM
+from salome.geom import geomBuilder
+import math
+import SALOMEDS
+import utilityFunctions as uF
+from output import message
+
+#ellipse.generate(data_demi_grand_axe, data_centre, data_normale,data_direction, data_demi_petit_axe, data_angle, rayon_entaille,extension, outFile)
+#if True:
+ #data_demi_grand_axe = 2.
+ #data_centre = [0., 0., 0.]
+ #data_normale = [1., 0., 0.]
+ #data_direction = [0., 1., 0.]
+ #data_demi_petit_axe = 1.
+ #data_angle=180.
+ #rayon_entaille=0.1
+ #extension=0.1
+ #outFile='/home/I60976/00_PROJETS/2015_INTEGRATION_ZCRACKS/zcracks_salome/test.med'
+
+
+def generate(data_demi_grand_axe, data_centre, data_normale,
+ data_direction, data_demi_petit_axe, data_angle,
+ rayon_entaille, extension, outFile):
+
+ Vnormale, Vdirection, Vortho = uF.calcCoordVectors(data_normale, data_direction)
+ Vcentre = numpy.array(data_centre)
+
+ geompy = geomBuilder.New(theStudy)
+
+ O = geompy.MakeVertex(0, 0, 0)
+ OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
+ OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
+ OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
+ CENTRE = geompy.MakeVertex(Vcentre[0], Vcentre[1], Vcentre[2])
+ NORMALE = geompy.MakeVectorDXDYDZ(Vnormale[0], Vnormale[1], Vnormale[2])
+ DIRECTION = geompy.MakeVectorDXDYDZ(Vdirection[0], Vdirection[1], Vdirection[2])
+ DIRECTION_op = geompy.MakeVectorDXDYDZ(-Vdirection[0], -Vdirection[1], -Vdirection[2])
+ V3 = geompy.MakeVectorDXDYDZ(Vortho[0], Vortho[1], Vortho[2])
+ V3_op = geompy.MakeVectorDXDYDZ(-Vortho[0], -Vortho[1], -Vortho[2])
+ if data_demi_grand_axe >= data_demi_petit_axe:
+ ELLIPSE = geompy.MakeEllipse(CENTRE, NORMALE, data_demi_grand_axe, data_demi_petit_axe, DIRECTION)
+ else:
+ ELLIPSE = geompy.MakeEllipse(CENTRE, NORMALE, data_demi_petit_axe, data_demi_grand_axe, V3)
+
+ if rayon_entaille<1.e-12:
+ FELLIPSE = geompy.MakeFaceWires([ELLIPSE], 1)
+ dim=2
+ else:
+ dim=3
+ VP1=Vcentre+Vdirection*(data_demi_grand_axe-rayon_entaille)+Vnormale*rayon_entaille
+ VP2=Vcentre+Vdirection*(data_demi_grand_axe)
+ VP3=Vcentre+Vdirection*(data_demi_grand_axe-rayon_entaille)-Vnormale*rayon_entaille
+ PE1=geompy.MakeVertex(VP1[0], VP1[1], VP1[2])
+ PE2=geompy.MakeVertex(VP2[0], VP2[1], VP2[2])
+ PE3=geompy.MakeVertex(VP3[0], VP3[1], VP3[2])
+ ARC = geompy.MakeArc(PE1, PE2, PE3)
+ TUYAU = geompy.MakePipe(ARC, ELLIPSE)
+ subShapesList=geompy.GetFreeBoundary(TUYAU)[1]
+ entailleFace1 = geompy.MakeFaceWires([subShapesList[0]], 1)
+ entailleFace2 = geompy.MakeFaceWires([subShapesList[1]], 1)
+ FELLIPSE = geompy.MakeShell([TUYAU, entailleFace1, entailleFace2])
+
+ edgesIDs = geompy.SubShapeAllIDs(FELLIPSE, geompy.ShapeType["EDGE"])
+ edges = geompy.CreateGroup(FELLIPSE, geompy.ShapeType["EDGE"])
+ geompy.UnionIDs(edges, edgesIDs)
+ geompy.addToStudy( FELLIPSE, 'FELLIPSE' )
+ geompy.addToStudyInFather( FELLIPSE , edges, 'edges' )
+
+ hauteur=numpy.max([data_demi_grand_axe,data_demi_petit_axe])*1.1
+
+ eps=1.E-05
+ bool_boite=True
+ extrusion=numpy.max([1.,rayon_entaille])*1.1
+ if ( (data_angle>(eps)) and (data_angle<(180.-eps)) ):
+ rayon2=hauteur*numpy.tan(data_angle*numpy.pi/180./2.)
+
+ B1=geompy.MakeTranslationVectorDistance(CENTRE,DIRECTION,hauteur)
+ B2=geompy.MakeTranslationVectorDistance(B1,V3,rayon2)
+ geompy.TranslateVectorDistance(B1,V3_op,rayon2, False)
+ LB01 = geompy.MakeLineTwoPnt(CENTRE, B1)
+ LB02 = geompy.MakeLineTwoPnt(CENTRE, B2)
+ LB12 = geompy.MakeLineTwoPnt(B1, B2)
+ plan_BOITE = geompy.MakeFaceWires([LB01, LB02, LB12], True)
+
+ BOITE = geompy.MakePrismVecH2Ways(plan_BOITE, NORMALE, extrusion)
+
+ FACE_FISSURE = geompy.MakeCommonList([FELLIPSE, BOITE])
+
+ elif ( (data_angle>=(180.-eps)) and (data_angle<=(180.+eps)) ):
+ VP1=Vcentre+Vortho*hauteur
+ VP2=Vcentre-Vortho*hauteur
+ VP3=Vcentre-Vortho*hauteur+Vdirection*hauteur
+ VP4=Vcentre+Vortho*hauteur+Vdirection*hauteur
+
+ Sommet_1 = geompy.MakeVertex(VP1[0], VP1[1], VP1[2])
+ Sommet_2 = geompy.MakeVertex(VP2[0], VP2[1], VP2[2])
+ Sommet_3 = geompy.MakeVertex(VP3[0], VP3[1], VP3[2])
+ Sommet_4 = geompy.MakeVertex(VP4[0], VP4[1], VP4[2])
+
+ Ligne_1 = geompy.MakeLineTwoPnt(Sommet_1, Sommet_2)
+ Ligne_2 = geompy.MakeLineTwoPnt(Sommet_2, Sommet_3)
+ Ligne_3 = geompy.MakeLineTwoPnt(Sommet_3, Sommet_4)
+ Ligne_4 = geompy.MakeLineTwoPnt(Sommet_4, Sommet_1)
+
+ Contour_1 = geompy.MakeWire([Ligne_1, Ligne_2, Ligne_3, Ligne_4], 1e-07)
+ Face_1 = geompy.MakeFaceWires([Contour_1], 1)
+ BOITE = geompy.MakePrismVecH2Ways(Face_1, NORMALE, extrusion)
+ FACE_FISSURE = geompy.MakeCommonList([FELLIPSE, BOITE])
+
+ elif ( (data_angle>(180.+eps)) and (data_angle<(360.-eps)) ):
+ rayon2=hauteur*numpy.tan((360.-data_angle)*numpy.pi/180./2.)
+
+ B1=geompy.MakeTranslationVectorDistance(CENTRE,DIRECTION_op,hauteur)
+ B2=geompy.MakeTranslationVectorDistance(B1,V3,rayon2)
+ geompy.TranslateVectorDistance(B1,V3_op,rayon2, False)
+ LB01 = geompy.MakeLineTwoPnt(CENTRE, B1)
+ LB02 = geompy.MakeLineTwoPnt(CENTRE, B2)
+ LB12 = geompy.MakeLineTwoPnt(B1, B2)
+ plan_BOITE = geompy.MakeFaceWires([LB01, LB02, LB12], True)
+ extrusion=numpy.max([1.,rayon_entaille])*1.1
+ BOITE = geompy.MakePrismVecH2Ways(plan_BOITE, NORMALE, extrusion)
+
+ FACE_FISSURE = geompy.MakeCutList(FELLIPSE, [BOITE])
+
+ elif ( (data_angle<=(eps)) or (data_angle>=(360.-eps)) ):
+ bool_boite=False
+ FACE_FISSURE = FELLIPSE
+
+ else:
+ message('E','Angle non prevu')
+
+ if bool_boite:
+ #geompy.addToStudy( BOITE, 'BOITE' )
+ newEdgesIDs = geompy.SubShapeAllIDs(FACE_FISSURE, geompy.ShapeType["EDGE"])
+ newEdges = geompy.CreateGroup(FACE_FISSURE, geompy.ShapeType["EDGE"])
+ geompy.UnionIDs(newEdges, newEdgesIDs)
+
+ [oldEdges] = geompy.RestoreGivenSubShapes(FACE_FISSURE, [FELLIPSE, edges], GEOM.FSM_GetInPlace, True, False)
+
+ toExtrude = geompy.CutListOfGroups([newEdges], [oldEdges])
+
+ if extension>1.e-12:
+ extrusion = geompy.MakePrismVecH(toExtrude, DIRECTION_op, extension)
+ try:
+ FACE_FISSURE = geompy.MakeFuseList([FACE_FISSURE, extrusion], False, True)
+ except:
+ FACE_FISSURE = geompy.MakeFuseList([FACE_FISSURE, extrusion], False, False)
+
+ #geompy.addToStudy( FACE_FISSURE, 'FACE_FISSURE' )
+
+ #geompy.addToStudy( FACE_FISSURE, 'FACE_FISSURE' )
+
+ import SMESH, SALOMEDS
+ from salome.smesh import smeshBuilder
+ smesh = smeshBuilder.New(theStudy)
+
+ A=numpy.pi/(30.)
+ minAxes=numpy.min([data_demi_grand_axe,data_demi_petit_axe])
+ maxAxes=numpy.max([data_demi_grand_axe,data_demi_petit_axe])
+ R=minAxes**2/maxAxes
+
+ if rayon_entaille>1.e-12:
+ R=numpy.min([R,rayon_entaille])
+ A=numpy.pi/(15.)
+
+ chordal, minSize = uF.calcElemSize(A, R)
+ maxSize=maxAxes/5.
+
+ Maillage=uF.meshCrack(FACE_FISSURE, minSize, maxSize, chordal, dim)
+
+ try:
+ Maillage.ExportMED( outFile, 0, SMESH.MED_V2_2, 1, None ,1)
+ smesh.SetName(Maillage.GetMesh(), 'MAILLAGE_FISSURE')
+ except:
+ print 'ExportToMEDX() failed. Invalid file name?'
+
+
+ ## Set names of Mesh objects
+
+
+ if salome.sg.hasDesktop():
+ salome.sg.updateObjBrowser(1)
