# - Config file for the @PROJECT_NAME@ package
# It defines the following variables. 
# Specific to the package @PROJECT_NAME@ itself:
#  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
#

###############################################################
# Copyright (C) 2013-2022  CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#

### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
@PACKAGE_INIT@

# Load the dependencies for the libraries of @PROJECT_NAME@ 
# (contains definitions for IMPORTED targets). This is only 
# imported if we are not built as a subproject (in this case targets are already there)
IF(NOT TARGET medcouplingcpp AND NOT @PROJECT_NAME@_BINARY_DIR)
  INCLUDE("@PACKAGE_MEDCOUPLING_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
ENDIF()   

# Package root dir:
SET_AND_CHECK(MEDCOUPLING_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")

# Include directories and definitions
SET_AND_CHECK(MEDCOUPLING_INCLUDE_DIRS "${MEDCOUPLING_ROOT_DIR_EXP}/@MEDCOUPLING_INSTALL_HEADERS@")
SET(MEDCOUPLING_INCLUDE_DIRS "${MEDCOUPLING_INCLUDE_DIRS};@_MEDCoupling_EXTRA_HEADERS@")
SET(MEDCOUPLING_DEFINITIONS)

# Package specific environment variables
@_MEDCoupling_EXTRA_ENV_FULL@

#### Now the specificities

# Options exported by the package:
SET(MEDCOUPLING_MICROMED       @MEDCOUPLING_MICROMED@)
SET(MEDCOUPLING_ENABLE_PYTHON  @MEDCOUPLING_ENABLE_PYTHON@)
SET(MEDCOUPLING_USE_MPI            @MEDCOUPLING_USE_MPI@)
SET(MEDCOUPLING_BUILD_DOC      @MEDCOUPLING_BUILD_DOC@)
SET(MEDCOUPLING_BUILD_TESTS    @MEDCOUPLING_BUILD_TESTS@)
SET(MEDCOUPLING_BUILD_GUI      @MEDCOUPLING_BUILD_GUI@)
SET(MEDCOUPLING_USE_64BIT_IDS  @MEDCOUPLING_USE_64BIT_IDS@)

# Advanced options

# Level 1 prerequisites:

# Optional level 1 prerequisites:

IF(NOT MEDCOUPLING_MICROMED)
  SET_AND_CHECK(MEDFILE_ROOT_DIR_EXP "@PACKAGE_MEDFILE_ROOT_DIR@")
ENDIF()

# For all prerequisites, load the corresponding targets if the package was used
# in CONFIG mode. This ensures dependent projects link correctly
# without having to set LD_LIBRARY_PATH:
SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
  # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
  MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
  FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
    LIST(GET _PREREQ_@PROJECT_NAME@            ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@    )
    LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
    LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
    IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
      MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
      IF(NOT _pkg_compo_@PROJECT_NAME@)
        FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
            PATHS "${_pkg_dir_@PROJECT_NAME@}"
            NO_DEFAULT_PATH)
      ELSE()
        STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
        MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
        FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
            COMPONENTS ${_compo_lst_@PROJECT_NAME@}
            PATHS "${_pkg_dir_@PROJECT_NAME@}"
            NO_DEFAULT_PATH)
      ENDIF()
    ENDIF()
  ENDFOREACH()
ENDIF()

# Installation directories
SET(MEDCOUPLING_INSTALL_BINS "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_LIBS "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_HEADERS "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_SCRIPT_SCRIPTS "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_TESTS "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_SCRIPT_PYTHON "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_CMAKE_LOCAL "@MEDCOUPLING_INSTALL_BINS@")
IF(MEDCOUPLING_ENABLE_PYTHON)
  SET(MEDCOUPLING_INSTALL_PYTHON "@MEDCOUPLING_INSTALL_BINS@")
  SET(MEDCOUPLING_INSTALL_PYTHON_SHARED "@MEDCOUPLING_INSTALL_BINS@")
ENDIF(MEDCOUPLING_ENABLE_PYTHON)
SET(MEDCOUPLING_INSTALL_RES "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_DOC "@MEDCOUPLING_INSTALL_BINS@")

# Exposed MEDCoupling targets:
SET(MEDCoupling_interpkernel interpkernel)
SET(MEDCoupling_medcouplingcpp medcouplingcpp)
SET(MEDCoupling_medcoupling    medcouplingcpp)
SET(MEDCoupling_medicoco    medicoco)
SET(MEDCoupling_medcouplingremapper medcouplingremapper)
SET(MEDCoupling_medloader medloader)
SET(MEDCoupling_renumbercpp renumbercpp)
SET(MEDCoupling_medpartitionercpp medpartitionercpp)
SET(MEDCoupling_MEDPARTITIONERTest MEDPARTITIONERTest)
SET(MEDCoupling_InterpKernelTest InterpKernelTest)
SET(MEDCoupling_paramedmem paramedmem)
SET(MEDCoupling_paramedloader paramedloader)
SET(MEDCoupling_paramedmemcompo paramedmemcompo)
SET(MEDCoupling_ParaMEDMEMTest ParaMEDMEMTest)
SET(MEDCoupling_medcouplingclient medcouplingclient)