Increment version: 8.5.0

[plugins/dxfplugin.git] / SalomeDXFPLUGINConfig.cmake.in

diff --git a/SalomeDXFPLUGINConfig.cmake.in b/SalomeDXFPLUGINConfig.cmake.in
index 8c82a7e521b571dfe20d453fa371206484d1853e..c3823c6149111dc7fdf5b1f372d38c7bc18c847c 100644 (file)
--- a/SalomeDXFPLUGINConfig.cmake.in
+++ b/SalomeDXFPLUGINConfig.cmake.in
@@ -1,10 +1,11 @@
 # Config file for the @PROJECT_NAME@ package
 # It defines the following variables:
+# Specific to the pacakge @PROJECT_NAME@ itself:
 #   @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
 #
 
 ###############################################################
-# Copyright (C) 2014  OPEN CASCADE
+# Copyright (C) 2014-2016  OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -29,7 +30,7 @@
 # Load the dependencies for the libraries of @PROJECT_NAME@ 
 # (contains definitions for IMPORTED targets). This is only 
 # imported if we are not built as a subproject (in this case targets are already there)
-IF(NOT TARGET DXFExport AND NOT @PROJECT_NAME@_BINARY_DIR)
+IF(NOT TARGET DXFPluginEngine AND NOT @PROJECT_NAME@_BINARY_DIR)
   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
 ENDIF()   
 
@@ -39,7 +40,6 @@ SET_AND_CHECK(DXFPLUGIN_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
 # Include directories
 SET_AND_CHECK(DXFPLUGIN_INCLUDE_DIRS "${DXFPLUGIN_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
 SET(DXFPLUGIN_INCLUDE_DIRS "${DXFPLUGIN_INCLUDE_DIRS};@_SalomeDXFPLUGIN_EXTRA_HEADERS@")
-SET(DXFPLUGIN_DEFINITIONS)
 
 # Package specific environment variables
 @_SalomeDXFPLUGIN_EXTRA_ENV_FULL@
@@ -47,40 +47,45 @@ SET(DXFPLUGIN_DEFINITIONS)
 #### Now the specificities
 
 # Options exported by the package:
-#SET(SALOME_DXFPLUGIN_BUILD_DOC   @SALOME_BUILD_DOC@)
+SET(SALOME_DXFPLUGIN_BUILD_DOC   @SALOME_BUILD_DOC@)
 SET(SALOME_DXFPLUGIN_BUILD_TESTS @SALOME_BUILD_TESTS@)
+SET(SALOME_DXFPLUGIN_BUILD_GUI   @SALOME_BUILD_GUI@)
 
 # Level 1 prerequisites:
 SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
+SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
+SET_AND_CHECK(GEOM_ROOT_DIR_EXP "@PACKAGE_GEOM_ROOT_DIR@")
 SET_AND_CHECK(DXF_ROOT_DIR_EXP "@PACKAGE_DXF_ROOT_DIR@")
 SET_AND_CHECK(OCCLICENSE_ROOT_DIR_EXP "@PACKAGE_OCCLICENSE_ROOT_DIR@")
 
-# For all prerequisites, load the corresponding targets if the package was used 
+# For all prerequisites, load the corresponding targets if the package was used
 # in CONFIG mode. This ensures dependent projects link correctly
 # without having to set LD_LIBRARY_PATH:
-SET(_PREREQ @_PREREQ_LIST@)
-SET(_PREREQ_CONFIG_DIR @_PREREQ_DIR_LIST@)
-SET(_PREREQ_COMPONENTS "@_PREREQ_COMPO_LIST@")
-LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
-IF(NOT _list_len EQUAL 0)
+SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
+SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
+SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
+LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
+IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
-  MATH(EXPR _range "${_list_len}-1")
-  FOREACH(_p RANGE ${_range})  
-    LIST(GET _PREREQ            ${_p} _pkg    )
-    LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
-    LIST(GET _PREREQ_COMPONENTS ${_p} _pkg_compo)
-    MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
-    IF(NOT _pkg_compo)
-      FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE 
-          PATHS "${_pkg_dir}" 
-          NO_DEFAULT_PATH)
-    ELSE()
-      STRING(REPLACE "," ";" _compo_lst "${_pkg_compo}")
-      MESSAGE(STATUS "===> (components: ${_pkg_compo})")
-      FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
-          COMPONENTS ${_compo_lst} 
-          PATHS "${_pkg_dir}"
-          NO_DEFAULT_PATH)
+  MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
+  FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
+    LIST(GET _PREREQ_@PROJECT_NAME@            ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@    )
+    LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
+    LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
+    IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
+      MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
+      IF(NOT _pkg_compo_@PROJECT_NAME@)
+        FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
+            PATHS "${_pkg_dir_@PROJECT_NAME@}"
+            NO_DEFAULT_PATH)
+      ELSE()
+        STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
+        MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
+        FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
+            COMPONENTS ${_compo_lst_@PROJECT_NAME@}
+            PATHS "${_pkg_dir_@PROJECT_NAME@}"
+            NO_DEFAULT_PATH)
+      ENDIF()
     ENDIF()
   ENDFOREACH()
 ENDIF()
@@ -88,11 +93,19 @@ ENDIF()
 # Installation directories
 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
+SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
+SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
+
+# Include GEOM targets if they were not already loaded:
+IF(NOT (TARGET GEOMEngine)) 
+  INCLUDE("${GEOM_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeGEOMTargets.cmake")
+ENDIF()
 
 # Exposed DXFPLUGIN targets:
-SET(DXFPLUGIN_DXFExport DXFExport)
-SET(DXFPLUGIN_DXFImport DXFImport)
\ No newline at end of file
+SET(DXFPLUGIN_SalomeIDLDXFPlugin SalomeIDLDXFPlugin)
+SET(DXFPLUGIN_DXFPluginEngine DXFPluginEngine)
+SET(DXFPLUGIN_DXFPluginGUI DXFPluginGUI)